INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Analytical determination of loudest noise hour for highway noise impact analyses
pp. 1-7(7)
Authors: Burge, Paul; Chen, Alex

Representing highway noise exposure - Confessions of a contourtionist
pp. 8-17(10)
Author: Staiano, Michael A.

Tennessee Department of Transportation assessment of noise barrier needs on existing highways
pp. 18-26(9)
Authors: Bowlby, William; Reiter, Darlene D.; Pratt, Geoffrey; Patton, Robert C.; Delaney, Douglas J.

Michigan's model highway noise ordinance: Technical issues and approaches
pp. 27-36(10)
Authors: Avery, Kenneth R.; Spica, Frank M.

Functional (unit) sound absorbing panels reduce noise levels in waste water treatment facility
pp. 37-40(4)
Author: Eckel, Alan

"Solutions approach" to noise issues
pp. 41-50(10)
Authors: Huckins, R. Dennis; Murray, Christopher J.

Effect of dynamic stiffness and mass of resilient sound mat material on the impact sound performance of floor-ceiling assemblies
pp. 51-54(4)
Authors: Downey, P.; Bachman, G.

Designed elasticity for railway superstructure - System design aspects and typical components
pp. 55-63(9)
Author: Dorfner, Thomas H.

Measurement of operating forces of an electric motor
pp. 64-75(12)
Authors: Moorehouse, A.T.; Cookson, R.D.; Seiffert, G.

Overwiew of nearfield acoustical holography techniques
pp. 76-82(7)
Authors: Beniwal, Ravinder; Mazza, Sergio; Moondra, Manmohan S.; Wu, Sean F.

Am improved correction for source nonstationarity in multireference, scan-based near-field acoustical holography
pp. 83-92(10)
Authors: Lee, Moohyung; Bolton, J. Stuart

Influence of boundaries on the acoustic radiation by a submerged elastic structure
pp. 93-97(5)
Authors: Cuschieri, Joseph M.; Charmes, Emmanuel; Beaujean, Pierre P.

Visualizing brake squeal and its out-of-plane modes using HELS
pp. 98-102(5)
Authors: Moondra, Manmohan S.; Wu, Sean F.; Beniwal, Ravinder; Mazza, Sergio; Chen, Frank; Chen, Shih-Emn

Study of the 24 hour environmental noise level behavior in San Juan, Puerto Rico
pp. 103-107(5)
Authors: Alicea-Pou, Jose; Vinas-Curiel, Olga; Cruz-Vizcarrondo, Wanda; Alomar, Osvaldo

Status of the noise control infrastructure in the commonwealth of Puerto Rico
pp. 108-113(6)
Author: Alicea-Pou, Jose A.

Community noise issues and solutions for a research laboratory campus
pp. 114-119(6)
Author: Connolly, Sean

The effects of project sequence on future land use compatibility
pp. 120-124(5)
Author: Busch, Todd A.

A critique of "relative" community noise standards
pp. 125-130(6)
Authors: Kaliski, Kenneth; Collier, Robert

Revising Oregan's noise regulations for wind turbines
pp. 131-139(9)
Author: Bastasch, Mark

Empirical study for noise reduction of an impact power wrench and jig saw
pp. 140-147(8)
Authors: Kulkami, Prashant; Coombs, Douglas; Giachetto, Mathew; Wade, Daniel; Buchholz, Todd; Kim, Jay

Study and reduction of noise from an electric router
pp. 148-153(6)
Authors: LaLonde, Jason D.; Pruse, Ronald L.; Rao, Mohan D.

Study of noise transmission from an electric impact wrench
pp. 154-160(7)
Authors: Markesino, Jason; Pruse, Ron; Rao, Mohan D.

Sound radiation modes of a tire on a reflecting surface
pp. 161-168(8)
Authors: Yum, Kiho; Bolton, J. Stuart

Quantification of the tonal prominence of complex tones in machinery noise
pp. 169-174(6)
Authors: Lee, Kyoung Hoon; Davies, Patricia; Surprenant, Aimee M.

Acoustical visualization of the refrigeration compressor by using statistical optimized nearfield acoustical holography in cylindrical coordinates
pp. 175-182(8)
Authors: Cho, Yong T.; Bolton, J. Stuart

Structural-acoustic measurements of a submerged cylindrical shell
pp. 183-192(10)
Authors: Doty, Benjamin J.; Hambric, Stephen A.; Fahnline, John B.; Conlon, Stephen C.

Estimates of the spatial extent of high frequencies from spherical blast waves
pp. 193-201(9)
Authors: Loubeau, Alexandra; Sparrow, Victor W.

Qualification of a reverberation chamber equipped with lightweight diffusers
pp. 202-208(7)
Authors: Famighetti, Tina M.; Muhlberger, Emily E.; Cunefare, Kenneth A.

Measurement of sound transmission loss using a modified four microphone impedance tube
pp. 209-216(8)
Authors: Barnard, Andrew R.; Rao, Mohan D.

A comparison of acoustic absorption coefficient measurements from the int-situ method with traditional methods
pp. 217-224(8)
Authors: Barnard, Andrew R.; Rao, Mohan D.

Smart foam for active vibration and noise control
pp. 225-238(14)
Authors: Wael, N. Akl; Amr, M. Baz

Influence of road pavement finish on sound exposure for slow speeds in residential areas
pp. 239-250(12)
Author: Pettyjohn, Steven D.

Influence of PCC surface texture and joint slap on tire/pavement noise generation
pp. 251-262(12)
Author: Donavan, Paul R.

Pavement rehabilitation and traffic noise reduction along an arterial street
pp. 263-274(12)
Author: Donavan, Paul R.

Acoustical variability of existing pavements
pp. 275-285(11)
Authors: Thornton, William D.; Bernhard, Robert J.; Hansen, Douglas I.; Scofield, Larry

Underwater sound levels associated with marine pile driving - Assessment of impacts and evaluation of control measures
pp. 286-299(14)
Author: Reyff, James A.

Saint Johns Bluff Road pile driver acoustical blanket noise reduction analysis: Jacksonville, Florida
pp. 300-305(6)
Author: Kinney, Bernard I.

Time-frequency analysis of high-intensity, fast transient noise from power tools by analytic wavelet transform
pp. 306-312(7)
Authors: Kulkarni, Prashant; Zhu, Wiangdong; Kim, Jay; Hayden, Chuck

Noise control of power tools used in the construction industry - NIOSH/Universities Partnership case studies
pp. 313-317(5)
Author: Hayden, Charles S.

Modeling of construction noise using neural networks
pp. 318-323(6)
Author: Hamoda, Mohamed F.

Variance of energy and confidence intervals in SEA: Numerical and experimental validation
pp. 324-332(9)
Authors: Contoni, Vincent; Langley, Robin S.

Interior noise prediction of Hawker Horizon aircraft using Statistical Energy Analysis
pp. 333-346(14)
Authors: Dandaroy, Indranil; Hartley, Dayton; Hund, Ron

Comparison of SEA predictions and shuttle fuel pipe responses - An investigation of fatique crack growth using acoustic excitation
pp. 347-354(8)
Authors: O'Keefe, Ed; Clark, Bob

Modeling point excited plates using an energy finite element method
pp. 355-366(12)
Author: Klos, Jacob

By air by SEA
pp. 367-379(13)
Author: Davis, Evan B.

Numerical and experimental validation of hybrid FE-SEA method
pp. 380-388(9)
Authors: Shorter, Phil; Cotoni, Vincent; Langley, Robin

Alerting individuals about their noise-senstivity before they move into a noise-impacted neighborhood
pp. 389-393(5)
Author: Luz, George A.

Barriers to communtiy input to noise policy decisions - Two case studies
pp. 394-405(12)
Author: Blomberg, Les

Reductions in city background noise due to relocation of artery traffic into underground tunnels
pp. 406-416(11)
Author: Thalheimer, Erich

Exchanging noise management information with community groups using interactive, multimedia technologies
pp. 417-421(5)
Author: Dubbink, David T.

A compelling case for the use of the C-weighting noise metric for outdoor amphitheater noise measurements
pp. 422-427(6)
Authors: Brown, David J.; Kolano, Richard A.

Traffic noise abatement: A rural state faces challenges and opportunities
pp. 428-435(8)
Authors: Bowlby, William; Reiter, Darlene E.; Helm, Cora G.; Boyer, James; Herman, Lloyd

Continuing long-term evaluation of open grade asphalt for the reduction of traffic noise
pp. 436-448(13)
Author: Reyff, James A.

Near field tire noise measurements of similar pavements of different ages
pp. 448-455(8)
Authors: Donavan, Paul R.; Scofield, Larry

Long-term noise characteristics of HMA
pp. 456-463(8)
Author: Hanson, Douglas I.

Sound quality comparisons among various automobile makes and models
pp. 464-469(6)
Authors: Maher, Matthew; Collier, Robert; Kaliski, Kenneth

The challenge of using conventional measurement methods to assess heavy truck noise exposure risk and cabin noise reduction benefit
pp. 470-478(9)
Authors: Maguire, Daniel J.; St. Pierre, Richard L.

Evaluation of a reverberatn water tank for radiated power measurements
pp. 479-491(13)
Authors: Conlon, Stephen C.; Hambric, Stephen A.; Bonness, William K.

Sound absorption and sound power measurements in reverberation chamber equipped with lightweight diffusers
pp. 492-500(9)
Authors: Ford, Justin T.; Leonberg, Craig R.; Maser, Nicholas B.; McDade, Christopher J.; Ortkiese, Russell; Reynolds, Ryan E.; Stinchcomb, Joann A.; Waddle, J. Adam; Famighetti, Tina M.; Cunefare, Kenneth A.

Acoustic transmission through a multi-layered windshield structure: Correlation between numerical simulation and measurements
pp. 501-506(6)
Authors: Leclercq, T.; Coyette, J-P; Lielens, G.

Numerical investigation of acoustic impedance of perforated tubes
pp. 507-514(8)
Authors: Balasubramanian, D.; Wu, T.W.; Cheng, C.Y.R.

The control of local vibration modes of a box structure using honeycomb panel
pp. 515-523(9)
Authors: Ngai, K.W.; Lee, Y.Y.; Ng, C.F.

NIOSH impulsive noise measurement system (NIMS)
pp. 524-531(8)
Authors: Yan, Huiqin; Kardous, Chucri A.; Murphy, William J.

Sonic boom simulation using conventional audio equipment
pp. 532-540(9)
Author: Salamone, Joe

Human response to simulated low-intensity sonic boom
pp. 541-550(10)
Author: Sullivan, Brenda M.

Some important factors in community response to sonic booms
pp. 551-556(6)
Author: Schomer, Paul D.

Why is rotocraft noise perceived differently?
pp. 557-565(9)
Author: Leverton, John W.

Workshop on noise policy developments
pp. 566-566(1)
Authors: Lang, William W.; Hellweg, Robert D.

Evaluating sound absorption in situ using 'ANDRIENNE"
pp. 567-573(7)
Authors: Wayson, Roger L.; Peppin, Richard J.

LRT vibration control using shredded tires
pp. 574-582(9)
Author: Gharabegian, Areg

Noise test codes used in the air compressor industry
pp. 583-592(10)
Author: Lucas, Michael J.

Measurement tools for studying fan noise
pp. 593-601(9)
Authors: Laage, John W; Mahendra, Pranay; Melzer, Paul J.; Olsen, Michael G.; Mann, J. Adin; Yarbough, Dale; Yu, Chen

Radiated noise from small centrifugal fans
pp. 602-610(9)
Author: Burroughs, Courtney B.

Prediction of turbulence induced noise within product development processes
pp. 611-619(9)
Authors: Wieler, Bruno; Tibaut, Peter; Higbie, David; van Lier, Leonard; Golliard, Joachim; Vedy, Eric

Noise from natural gas compressor stations
pp. 620-626(7)
Authors: Moreland, James; Hansen, Mark

Implementing PWM fan speed control to decrease energy consumption, reduce acoustics, and increase fan performance
pp. 627-631(5)
Authors: Arredondo, Abe; Roy, Partha; Wofford, Erin

Improvements to the tow-thickness method for deriving acoustic properties of materials
pp. 632-640(9)
Authors: Palumbo, Daniel L.; Jones, Michael G.; Klos, Jacob; Park, Junhong

Measurements of acoustic properties of porous and granular materials and application of vibration control
pp. 641-650(10)
Authors: Park, Junhong; Palumbo, Daniel L.

Free wave propagation in sandwich-panels with poro-elastic cores
pp. 651-662(12)
Authors: Kim, Jeong-Woo; Bolton, J. Stuart

Damping material hybrid composite systems
pp. 663-670(8)
Author: Gagliardi, John C.

Auditory demonstrations II: Challenges to speech communication and music listening
pp. 671-675(5)
Authors: Cooper, Beth A.; Nelson, David A.; Danielson, Richard W.

Monitoring and analysis of influence of different kinds of sound on physio psychological response of humans
pp. 676-683(8)
Authors: Gandhi, N.; Kumar, D.K.

Directional detection and localization of a bolt click sound in jungle- and pink-noise
pp. 684-693(10)
Authors: Letowski, Tomasz; Mermagen, Timothy; Abouchacra, Kim S.

Speech transmission indes - Public address (STIPA): Objective assessment of intelligibility
pp. 694-701(8)
Authors: Bjor, Ole-Herman; Peppin, Richard J.

The impact of A-weighting sound pressure level measurements during the evaluation of noise exposure
pp. 702-708(7)
Authors: St. Pierre, Richard L.; Maguire, Daniel J.

Acoustic characterization of historic cloister in Portugal
pp. 709-719(11)
Authors: Carvalho, Antonio P.O.; Carvalho, Anabela P.B.

Measured versus modeled aircraft noise a Logan Airport
pp. 720-724(5)
Author: Timmerman, Nancy S.

Nonlinear propagation of noise radiated from supersonic jets
pp. 725-733(9)
Authors: Gee, Kent L.; Petitjean, Benoit P.; McLaughlin, Dennsi K.; Sparrow, Victor W.

The effect of bodies of water on aircraft noise propagation
pp. 734-740(7)
Author: Downing, J. Micah

Noise insulation performance of buildings near airports: Measurement issues and perspectives
pp. 741-744(4)
Author: Freytag, John C.

Control of vibration responses within a post and beam and cantilevered steel structure supporting a surgical wing
pp. 745-756(12)
Author: Wiebusch, Julie A.

Criteria and post-occupancy tests for an intensive care nursery built to protect infant sleep and adult speech intelligibility
pp. 757-763(7)
Authors: Philbin, M. Kathleen; Evans, Jack B.

Noise measurements in the Johns Hopkins medical institutions' pediatric intensive care unit
pp. 764-771(8)
Authors: Hunter, Tyrone; Busch-Vishniac, Ilene; West, James E.; Chivukula, Ramanadh V.

A procedure for measuring speech detection in directional noise
pp. 772-784(13)
Authors: Abouchacra, Kim S.; Letowski, Tomasz

Characterization of run-up and down transient events for a hard disk drive
pp. 785-794(10)
Authors: Ali, Dave; Bray, Wade

Acoustics analysis of hard disc drive covers considering an internal drive noise source
pp. 795-805(11)
Authors: Mignery, Lezza; Conkin, Chris; Tousi, Shahram

Experimental setups for quiet fan design
pp. 806-814(9)
Authors: Trautman, Mark A.; Beltman, Willern M.

Optimizing circular side-resonators to reduce computer fan noise
pp. 815-826(12)
Authors: Nijhof, Marten J.J.; Wijnant, Ysbrand H.; de Boer, Andre; Beltman, Willern M.

Aspects of HDD tone measurements: Sound power microphones as bystander positions and autocorrelation analysis
pp. 827-833(7)
Author: Baugh, Eric

Applications of attenuations and reflections in ISO 9613-2, Acoustics - Attenuation of sound during propagation outdoors - Part 2: General method of calculation
pp. 834-842(9)
Author: Ray, Elden F.

Handling of barriers in ISO 9613-2
pp. 843-850(8)
Author: Parzych, David

Atmospheric effects in ISO 9613-2
pp. 851-860(10)
Author: Wilson, D. Keith

Noise modeling using ISO 9613-2 for designing facilities to meet a not-to-exceed community noise limit
pp. 861-873(13)
Author: Brittain, Frank

Helicopter transmission noise mechanisms, analysis methods, and noise reduction techniques
pp. 874-883(10)
Authors: Hambric, Stephen A.; Smith, Edward C.; Szefi, Joseph T.; Campbell, Robert L.

Panel critical frequency in relation to business jet cabin noise control
pp. 884-888(5)
Author: Lucas, Michael E.

Active control of noise transmission into payload fairings using distributed active vibration absorbers and loudspeakers
pp. 889-898(10)
Authors: Sacarcelik, Ozer; Johnson, Marty

Damped windows for aircraft interior noise control
pp. 899-910(12)
Authors: Buehrle, Ralph D.; Klos, Jacob; Gibbs, Gary P.

The application of nearfield acoustical holography for the quantification of contributions to noise in aircraft passenger cabins by regions of the interior vibrating surfaces
pp. 911-921(11)
Author: Burroughs, Courtney B.

Proposed criteria for low frequency noise from combustion turbine power plants
pp. 922-931(10)
Author: Hessler, George F.

Multiple analysis and measurement methods to confirm the absence of noise impacts from a power plant
pp. 932-941(10)
Author: Greene, Michael

Low-frequency noise effects in residential buildings along a bus rapid transit (BRT) route
pp. 942-947(6)
Authors: Towers, David A.; Ross, Jason C.; McDowell, Jim

500 Atlantic Avenue - A structural vibration isolation case history
pp. 948-961(14)
Authors: Tocci, Gregory C.; Lyon, Richard H.; Moore, James A.

Building acoustics: A key part of the whole building design process
pp. 962-964(3)
Author: Paradis, Richard

Blue Angel for printing products: An assessment of new acoustic requirements in 2004
pp. 965-974(10)
Author: Baird, Terrence W.

Non-operating mode acoustics of imaging technology products
pp. 975-982(8)
Authors: Saunders, Chris; Shepherd, Ben

Web-based product noise declarations for the information technology industry
pp. 983-993(11)
Authors: Nobile, Matthew A.; Eames-Harlan, David

Test code vs. in-situ sound pressure levels for computers
pp. 994-1001(8)
Author: Man, Kaleen Xiuting C.