Adaptive analog and digital active noise control

Digital adaptive controllers are widely used for active noise control. The secondary path delay, including the anti-aliasing, sampling, and reconstruction effects, must be shorter than that in the primary path to maintain good broadband performance. To eliminate the added delay of the sampling, a mixed analog and digital adaptive feedforward controller is developed. The analog controller is based on a state-filtered adaptive linear combiner, while the digital one uses an adaptive finite-impulse-response filter. The adaptation of the analog controller is derived based on a sampled version of the normalized projection algorithm, while the digital controller adaptation is based on the filtered-reference least-mean-squares algorithm. Two configurations are considered for the analog combiner. One aims to minimize the electrical noise by introducing individual state filters, all driven by the same reference signal. The other gives a superior bandwidth by driving each component filter with the previous filter output. The performance of the proposed controller is assessed and compared with separate analog or digital controllers. The results highlight that the suggested controller obtains significant attenuation levels close to the causality limit using the analog controller but also allows long impulse responses using the sampled controller.