INTER-NOISE and NOISE-CON Congress and Conference Proceedings
ISSN 0736-2935 (Print)


The Noise-Con conference proceedings are sponsored by INCE/USA and the Inter-Noise proceedings by I-INCE. NOVEM (Noise and Vibration Emerging Methods) conference proceedings are included. All NoiseCon Proceedings one year or older are free to download. InterNoise proceedings from outside the USA older than 10 years are free to download. Others are free to INCE/USA members and member societies of I-INCE.
Publisher: Institute of Noise Control Engineering
- Membership Information
- INCE Subject Classification
- Ingenta Connect is not responsible for the content or availability of external websites
Articles
Harmonoise: Simplification of comprehensive source and propagation models into an accurate and practicable engineering method
pp. 1374-1380(7)
Authors:
Nota, R.; Leeuwen, J.J.A.; Barelds, R.; Beuving, M.; Cremezi, C.; Defrance, J.; Jonasson, H.G.; van Maercke, D.; Taraldsen, G.; Watts, G.; Witte, J.
CALM - Strategic planning of future noise research in Europe
pp. 1381-1388(8)
Authors:
Rust, A.; Affenzeller, J.
Numerical-experimental noise characterisation of road public transportation network
pp. 1389-1394(6)
Authors:
Scarselli, G.; Monaco, E.; Viscardi, M.; Lecce, L.
Aircraft noise and measures of sleep arousal
pp. 1395-1399(5)
Authors:
Hume, K.I.; Whitehead, C.
HARMONOISE project - WP4 experimental campaigns: Comparison among methods to separate road traffic noise from extraneous noise
pp. 1400-1407(8)
Authors:
Paini, D.; Gauvreau, B.; Kephalopoulos, S.; Berengier, M.; Iacoponi, A.; Licitra, G.; Turchini, G.
Vibration monitoring and noise improvement of an old steel railway bridge
pp. 1408-1414(7)
Authors:
Furtner, P.; Wenzel, H.
Identification of errors in the in situ method for sound absorption measurements
pp. 1415-1422(8)
Author:
Massarani, P.M.
3D CFD-CAA method for prediction of pressure pulsation and sound field in rotating machines
pp. 1423-1430(8)
Authors:
Timouchev, S.; Hamzaoui, N.; Pavic, G.; Aksenov, A.
Validation of aeroacoustic numerical simulations with wind tunnel measurements
pp. 1431-1438(8)
Authors:
Zeibig, A.; Schulze, C.; Sarradj, E.; Bauer, M.
Pantograph noise measurements in Madrid-Sevilla high speed train (AVE)
pp. 1439-1446(8)
Authors:
Genesca, M.; Sole, J.; Romeu, J.; Alarcon, G.
Finite wave element method and its application for engineering analysis
pp. 1447-1451(5)
Authors:
Bykov, Andrey S.; Sukhanov, Sergey O.
Measurement and evaluation of low frequency impact noise in lightweight wood floor/ceiling assemblies
pp. 1452-1456(5)
Authors:
LoVerde, J.; Dong, W.
Influence of friction on noise and vibrations of tyres
pp. 1457-1464(8)
Authors:
Kroger, M.; Lindner, M.; Popp, K.
Quantification of tire/pavement noise: Application of the sound intensity method
pp. 1465-1473(9)
Authors:
Donavan, P.; Rymer, B.
Finite element calculations of structural-acoustic modes of vehicle interior for simplified models of motorcars
pp. 1474-1481(8)
Authors:
Georgiev, V.B.; Krylov, V.V.; Winward, R.E.T.B.
Experimental investigation of acoustic resonance properties of vehicle compartments
pp. 1482-1489(8)
Authors:
Gorman, R.; Krylov, V.V.
Modeling reinforced plates using the spectral element method
pp. 1490-1496(7)
Authors:
Donadon, L.V.; Albuquerque, E.L.; Arruda, J.R.F.
A review of United State noise policy
pp. 1497-1504(8)
Authors:
Maling, G.C.; Finegold, L.S.
Noise mitigation measures in sporting arenas - Acoustic consequences resulting from the transformation of the Ghent's "Sportpaleis" in a mega dance hall
pp. 1505-1510(6)
Authors:
Pleeck, D.; Geens, L.
Numerical analysis of unsteady flow field and flow noise of a fan system
pp. 1511-1516(6)
Authors:
Jean, Wan-Ho; Cho, Jang-Hyung
Interior and exterior noise reduction study of the wheel loader
pp. 1517-1521(5)
Author:
Chun, Du Hwan
Sweep signals optimization for ultrasonic transducer response equalization
pp. 1522-1529(8)
Authors:
Costa-Felix, Rodrigo P.B.; Machado, Joao C.
Behavior analysis of the ancillary parts and crankshaft of diesel engine for noise reduction
pp. 1530-1537(8)
Author:
Ishihara, Akira
Analysis of tire/road noise radiation characteristics under acceleration conditions by sound intensity
pp. 1538-1543(6)
Authors:
Sakamoto, I.; Tanaka, T.; Katsura, N.; Fujikawa, Y.; Kogawa, S.
Road traffic noise prediction model "ASJ RTN-Model 2003" proposed by the Acoustical Society of Japan - The framework and the accuracy of the prediction
pp. 1544-1551(8)
Authors:
Yamamoto, K.; Tachibana, H.
A consideration on noise reduction effect and noise reduction mechanism of two-layer asphalt pavement
pp. 1552-1559(8)
Authors:
Namikawa, Y.; Koshiba, T.
Active control of interior noise of box structure using structural intensity method
pp. 1560-1567(8)
Authors:
Liu, Z.S.; Lee, H.P.; Lu, C.; Lim, S.P.
Study on sound from stream of water passing through channel with step and its sound quality
pp. 1568-1571(4)
Authors:
Minorikawa, G.; Maruta, Y.; Nakaniwa, H.
An active sinusoidal noise control system for diesel engine generator
pp. 1572-1579(8)
Authors:
Fujii, Kensaku; Fujita, Yusuke; Muneyasu, Mitsuji
Determining the EMC requirements for electroacoustic instruments complying with IEC standards
pp. 1580-1586(7)
Author:
Tyler, Richard
Soundscape of urban parks in Hong Kong
pp. 1587-1594(8)
Authors:
Wong, C.Y.; Lam, K.C.; Hui, W.C.
Noise and dynamic problems during developing a new high speed train in Korea
pp. 1595-1602(8)
Author:
Chung, Kyung-Ryul
Examination of perceived air pollution as a moderator of reaction to aircraft noise
pp. 1603-1610(8)
Authors:
Hatfield, J.; Soames Job, R.F.
Experimental examination of the effect of attitude to the noise source on reaction, and of reaction on performance
pp. 1611-1618(8)
Authors:
Djokvucic, I.; Hatfield, J.; Soames Job, R.F.
Physically based modelling of tire-rolling-noise by a finite element approach
pp. 1619-1626(8)
Authors:
Brinkmeier, M.; Nackenhorst, U.; von Estorff, O.; Petersen, S.
The principle of an active scatterer based on the JMC method
pp. 1627-1633(7)
Author:
Uosukainen, S.
Fast estimation of amplitude and phase of noise reduction
pp. 1634-1639(6)
Authors:
Sun, Hanwu; Shue, Louis; Chen, Jianfeng
Vibration analysis of office machines by SEA using FE model
pp. 1640-1645(6)
Authors:
Mori, Atsuo; Sasaki, Yuko; Takanashi, Akio; Kuroda, Katsuhiko; Yamazaki, Toru; Ohno, Shinichi
Robust design of 3-point engine mount system with improved NVH qualities
pp. 1646-1651(6)
Authors:
Bang, Jung-Hwan; Kang, Koo-Tae; Yoon, Hee-Wook; Cha, Jin-Soo; Seo, Jae-Jun
Optical measurement of acoustic pressure and vibration
pp. 1652-1658(7)
Authors:
Slegrova, Z.; Balek, R.
Multi criteria optimization of complex noise barriers
pp. 1659-1666(8)
Authors:
Baulac, M.; Defrance, J.
Numerical computation of the impulsive sound generated by a projective discharging from a muzzle
pp. 1667-1674(8)
Authors:
Bin, Jonghoon; Kim, Jaeheon; Lee, Soogab
On the uncertainty of meteorolgical corrections in sound power determination
pp. 1675-1680(6)
Author:
Wittstock, V.
The influence of bandwidth on the qualification of anechoic and hemianechoic rooms
pp. 1681-1686(6)
Authors:
Wittstock, V.; Bethke, C.
Application of Statistical Energy Analysis to vibration prediction in a gas heat pump outdoor unit
pp. 1687-1692(6)
Authors:
Tsujiuchi, N.; Koizumi, T.; Kanetani, Y.
Optimum active noise reduction based on acoustical analysis in the cabin of an agricultural tractor
pp. 1693-1696(4)
Authors:
Koizumi, T.; Tsujiuchi, N.; Nakamura, S.
Oper: An innovating urban noise monitoring system aiming at sustainable development of the enviroment
pp. 1697-1702(6)
Authors:
Chopard, F.; Dufournet, D.; Faiget, L.; Aujard, C.
ANAIS: An innovating system for aircraft noise and track monitoring (via the Internet)
pp. 1703-1709(7)
Authors:
Chopard, F.; Dufournet, D.; Faiget, L.; Aujard, C.
Isolation of GOHIF device considering human body structure
pp. 1710-1716(7)
Authors:
Lee, S.B.; Choe, E.J.; Ryu, B.J.; Kim, H.J.
Characteristics of rolling noise on narrow-gauge lines in Japan
pp. 1717-1724(8)
Authors:
Zenda, Yasuo; Tanaka, Shin-ichiro; Nagakura, Kiyoshi; Sunaga, Yoichi; Obara, Takanori; Satoh, Kiyoshi
A simple method to compute aircraft noise inside dwellings
pp. 1725-1732(8)
Authors:
Brutel-Vuilmet, C.; Jean, P.; Villot, M.
Propeller and shaft induced structure-borne noise isolation of a motor yacht
pp. 1733-1740(8)
Authors:
Wang, Wei-Hui; Liou, Der-Yuan; Fang, Chang-Kai; Lu, Wei-Yu; Ko, Tseng-chung; Wu, Shih-Chu
In flight experiments of local active noise attenuation in small aircraft
pp. 1741-1748(8)
Authors:
Romeu, J.; Pamies, T.; Jimenez, S.; Llibre, P.
Flow control technique to modify the aeroacoustic and aerodynamic characteristics of a high-speed pantograph by ejection of jets
pp. 1749-1756(8)
Authors:
Ikeda, M.; Yoshida, K.; Suzuki, M.
Binaural transfer path analysis and similation for door opening/closure sound improvement
pp. 1757-1763(7)
Authors:
Sellerbeck, P.; Stanley, R.; Young, S.
Acoustical design of brass band school concert hall in Ankara
pp. 1764-1767(4)
Author:
Bayazit, N.T.
Performance study of the FXLMS algorithm for active noise control with plant uncertainty
pp. 1768-1775(8)
Authors:
Song, Ying; Zhang, Jianmin; Shue, Louis
An advanced method for acoustic noise reduction for speech enhancement
pp. 1776-1783(8)
Authors:
Zhang, Jianmin; Shue, Louis; Song, Ying; Liu, Song
Results of a new method of measuring vehicles noise emission in real driving conditions
pp. 1784-1789(6)
Authors:
Moran, Laura; Casini, David; Poggi, Andrea
Investigation on the performance of high sound insulation ventilating windows
pp. 1790-1795(6)
Authors:
Asdrubali, F.; Buratti, C.; Baldinelli, G.
The influence of the massive external wall on the sound insulation between the rooms in building
pp. 1796-1801(6)
Authors:
Izewska, A.; Szudrowicz, B.
A study of the evaluation methodology for environmental noise quality assessments
pp. 1802-1807(6)
Authors:
Jo, Kyoung-Sook; Hur, Deog-Jae; Hwang, Dae-Sun; Cho, Yeon
Optimization of 2-dimensional shape of pantograph panhead for high speed trains
pp. 1808-1815(8)
Authors:
Yoshida, K.; Suzuki, M.; Ikeda, M.
The situation of environmental noise monitoring in Taiwan
pp. 1816-1819(4)
Authors:
Chuang, Shiun-Cheng; Chen, Chien-Wei
Galerkin and control-volume FEMs evaluation for acoustic problems
pp. 1820-1827(8)
Authors:
Redon, Emmanuel; Masse, Nadia; Prax, Christian
A simple method to calculate noise levels and noise contours during subsonic aircraft takeoff
pp. 1828-1838(11)
Author:
Norgia, L.
The new four subterranean halls in the Musikverein building in Vienna
pp. 1839-1843(5)
Author:
Quiring, K.B.
Optimal prediction using reformulated minimum variance predictor and time series modeling
pp. 1844-1851(8)
Authors:
Ahmad, R.K.R.; Tokhi, M.O.
Sound absorption behavior of anisotropic, fine fiber material
pp. 1852-1856(5)
Authors:
Kalinova, K.; Jirsak, O.; Novak, J.
Performance of BiCG-like iterative solvers with fast multipole boundary element method and improvement of convergence
pp. 1857-1864(8)
Authors:
Yasuda, Y.; Sakuma, T.
Aircraft and road traffic noise exposure and children's mental health in the RANCH study
pp. 1865-1870(6)
Authors:
Stansfeld, S.A.; Clark, C.; Cameron, R.M.; Haines, M.M.; van Kamp, I.; van Kempen, E.; Lopez-Barrio, I.
A hybrid analysis metholology for improved accuracy in low cost jet noise modelling
pp. 1871-1881(11)
Authors:
O'Hara, D.; Andersson, N.; Jordan, P.; Billson, M.; Eriksson, L.; Davidson, L.
A one-dimensional wave model for numerical analyses of ventilation openings with Helmholtz resonator attachments
pp. 1882-1887(6)
Authors:
Terao, M.; Sekine, H.; Ogawa, Y.; Sakashita, A.
Fast simulation of sound fields for urban square animation
pp. 1888-1895(8)
Authors:
Meng, Y.; Kang, J.
Application of polyester nonwoven fabric as absorbing material for wedges in an anechoic room
pp. 1896-1901(6)
Authors:
Suzuki, Yoiti; Saito, Fumitaka; Nakai, Katsumi; Shimada, Hidehiko
Performance evaluation for noise supression of a silencer in small arms
pp. 1902-1909(8)
Authors:
Lee, S.B.; Park, M.S.; Ryu, B.J.; Choe, E.J.; Kim, I.W.
Update on the activities of EC working group assessment of exposure to noise (WG-AEN)
pp. 1910-1916(7)
Author:
Hinton, J.
Measured sound levels of Japanese young people while listening to loudspeakers
pp. 1917-1923(7)
Authors:
Laitinen, H.; Yoshikawa, T.; Saito, F.; Suzuki, Y.
Modeling of the hydroacoustic behaviour of a butterfly valve
pp. 1924-1929(6)
Author:
Villouvier, V.
Prediction of damping loss factor of brake insulators using the Finite Element Method
pp. 1930-1937(8)
Authors:
Triches Jr, Mario; Gerges, Samir N.Y.; Jordan, Roberto; Filho, Evandro C.
A critical review and inter-comparison of methods for quantifying tonal and impulsive features in environmental noise
pp. 1938-1945(8)
Authors:
Berry, Bernard F.; Proter, Nicole D.
High accuracy estimation of arrival direction of infrasound
pp. 1946-1949(4)
Authors:
Miwa, Motoatsu; Matsunaga, Tomoyuki; Saito, Mikito; Shibayama, Hideo
Combined effects of road traffic and aircraft noise exposure on cognitive performance in the RANCH study
pp. 1950-1956(7)
Authors:
Stansfeld, S.A.; Clark, C.; Martin, R.; van Kempen, E.; Davies, H.; Haines, M.M.; Lopez-Barrio, I.; Matheson, M.; Berry, B.
I-INCE Technical Study Group 2 on "Noise labels for consumer and industrial products" - An update on progress
pp. 1957-1962(6)
Author:
Berry, Bernard F.
On the application of the projective sound models in ISO 17201 to ballistic trajectories
pp. 1963-1968(6)
Author:
Hirsch, K-W.
Low-frequency vibroisolation mounting for engines of new generation
pp. 1969-1976(8)
Authors:
Baklanov, V.; Golov, I.; Pastnov, S.
The realization of the standard of sound pressure unit at national metrological institution (GUM) in Poland
pp. 1977-1984(8)
Authors:
Szelag, M.; Zmierczak, T.
Combined effects of aircraft noise and road traffic noise on annoyance: The RANCH study
pp. 1985-1991(7)
Authors:
van Kamp, Irene; Nilsson, M.E.; van Kempen, E.; Stellato, R.K.; Lopez-Barrio, I.; Davies, H.; Stansfeld, S.
Reduction of sound immission in buildings by sound insulation using active facades
pp. 1992-1997(6)
Authors:
Kurtze, L.; Nordmann, R.; Doll, T.; Bein, t.
SADMAM - Combining measurements and calculations to map noise in Madrid
pp. 1998-2005(8)
Authors:
Manvell, D.; Ballarin Marcos, L.; Stapelfeldt, H.; Sanz, R.
Drivers' exposure to noise and vibration in city transportation
pp. 2006-2010(5)
Authors:
Koton, J.; Lipowczan, A.; Kowalski, P.; Szopa, J.
An actively controlled triple-glazed window
pp. 2011-2018(8)
Authors:
Jakob, A.; Bauers, R.; Moser, M.
Experience in planning of noise mitigation measures and in evaluating their effectiveness in the city of Modena
pp. 2019-2026(8)
Author:
Bertoni, Daniele
Time varying forward projection using wavenumber formulation
pp. 2027-2034(8)
Authors:
Grulier, V.; Thomas, J-H.; Pascal, J-C.; Le Roux, J-C.
Study of evaluation method for tire noise by applying sound quality metrics
pp. 2035-2041(7)
Authors:
Lee, Sang-Ju; Park, Joo-Bae; Kang, Hyun-Seok
Basic research for noise reduction of automatic water supply equipment
pp. 2042-2049(8)
Authors:
Park, Young-Chul; Kanemitsu, Yoichi; Kijimoto, Shinya; Guo, Shijie
Free-field qualification of anechoic chambers: Standardisation of the measurement practice
pp. 2050-2056(7)
Author:
Lord, R.M.
Source related mitigation measures and their effectiveness
pp. 2057-2064(8)
Author:
Heidebrunn, Frank
Human perception thesholds when exposed to vibrations of single and double frequency components
pp. 2065-2070(6)
Authors:
Ljunggren, F.; Wang, J.; Agren, A.
The vibration reduction index Kij: Laboratory measurements versus predictions EN 12354-1 (2000)
pp. 2071-2077(7)
Authors:
Crispin, C.; Mertens, C.; Blasco, M.; Ingelaere, B.; Van Damme, M.; Wuyts, D.
- Access Key
- Free content
- Partial Free content
- New content
- Open access content
- Partial Open access content
- Subscribed content
- Partial Subscribed content
- Free trial content