INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Are WELL Building Standard S02 sound levels too permissive of low frequency noise? Addressing the LFN in the room
pp. 1-7(7)
Author: Leaffer, Douglas

Multiple Microphone Miracles - Rejecting Unwanted Data from Your Measurements
pp. 8-17(10)
Authors: Hambric, Stephen; Taggart, Andrew; Walber, Chad

Metamaterial application to reduce noise transmission through glass
pp. 18-29(12)
Authors: Sorenson, Steve; Li, Xiaopeng

Backup Alarms: the noise scourge of construction projects
pp. 30-36(7)
Author: Thalheimer, Erich

Optimizing tire NVH performance in electric vehicles: A comprehensive approach using benchmarking, simulation, and validation
pp. 37-48(12)
Authors: Paua, Ketan; Singh, Ram Krishan; Raghupathi, Sundaram; Sundaramoorthy, Ragasruoban; Vikraman, V; Deivasigamani Purushothaman, Balakrishnan

Identification of Metrics to Assess Community Response to Leisure Sounds
pp. 49-61(13)
Authors: Lodico, Dana; Haac, T Ryan

Exploration of OINR testing method by vehicle-mounted loudspeaker
pp. 62-75(14)
Author: Foster, Matthew Stephen

Zero Pollution Action Plan - The potential for noise reduction in Germany
pp. 76-83(8)
Author: Hintzsche, Matthias

Design of Ultra low noise cooling tower and air cooled Generator
pp. 84-93(10)
Authors: Ramesh, Kps; P, Selvakumar

Structure-borne Noise and Vibration from a Gondola Lift Terminal
pp. 94-105(12)
Authors: Saunders, Ben; Romero, Patrick

Best practices for conducting secure and defensible long-term sound measurements
pp. 106-113(8)
Authors: Burge, Paul L.; Singleton, Herb

Acoustic Band Gaps and Sound Attenuation of Triply Periodic Minimal Surface-Based Metamaterials
pp. 114-121(8)
Authors: Sirivuri, Kamal K; Sekar, Vignesh; Cantwell, Wesley J; Liao, Kin; Berton, Benoit; Ravaud, Nicola; Jacquart, Pierre-Marie; Al-Rub, Rashid K. Abu

Method for developing a sound power budget for large numbers of sound sources
pp. 122-132(11)
Author: Dickman, Jameson

New ECMA-425 statistical background correction standard
pp. 133-140(8)
Author: Oppenheimer, Charles

Using hard disk drive surrogates
pp. 141-148(8)
Author: Oppenheimer, Charles

Guidelines for reducing underwater noise from commercial vessels
pp. 149-160(12)
Author: Spence, Jesse

Using BPA CAFE corona noise results in a 3-D noise model
pp. 161-167(7)
Author: Copenhaver, Benjamin J.

Estimation of geometric tortuosity for bulk acoustic absorbers using the heat method
pp. 168-178(11)
Authors: Ciletti, Anthony Vincent; Schneck, William; Spaeth, Peter; Brown, Martha; Sharma, Bhisham

Enhancing grazing incidence sound absorption in three-dimensional printed triply periodic minimal surfaces through geometric asymmetry
pp. 179-188(10)
Authors: Godakawela, Janith; Ciletti, Anthony Vincent; Sharma, Bhisham; Brown, Martha

Enhancing the vibration performance of mass timber floors: Effects of non-structural components
pp. 189-198(10)
Authors: Tigli, Omer; Hormozabad, Sajad

AI-Driven Optimization of Acoustic Metamaterials for Low-Frequency Noise Attenuation in Aerospace Applications
pp. 199-211(13)
Authors: Kone, Tenon Charly; Ghinet, Sebastian; Amar, Adam Ben; GREWAL, Anant

From detection to resolution: a case-study of a comprehensive approach to managing mining noise impacts on communities
pp. 212-218(7)
Authors: Ostiguy, Pierre-Claude; Mackenzie, Roderick; Lavoie, Patrick; Sciard, Magdeleine

Evaluation of alternative highway noise abatement strategies for one community
pp. 219-226(8)
Authors: Menge, Christopher; Finck, Robert; Noel, Scott; Katsoufis, Logan

Industrial noise mitigations - From design to commissionning, the role of the acoustician consultant for success - A practical case
pp. 227-234(8)
Author: Sauvageot, Loic

Noise Management Strategies for Geothermal Projects
pp. 235-244(10)
Author: Cott, Matt

Xlinks Morocco-UK Power Project: An Underwater Noise Case Study
pp. 245-256(12)
Author: Wilson, Josh H.

Reduction of rooftop-mounted air-conditioning condensing unit noise for a multi-family residential building using an iterative approach
pp. 257-267(11)
Author: Sevener, Nathan

Wind induced tonal noise from electrical power transmission infrastructure
pp. 268-279(12)
Authors: Mennitt, Dan; Spak, Kaitlin; Datta, Diptojit; Cotts, Benjamin

Testing vibration levels on floors in a chemistry laboratory building
pp. 280-285(6)
Author: Marshall, Steven E.

3D printing of spider web-inspired sound absorbers
pp. 286-295(10)
Authors: Johnston, William; Sanchez-Puentes, Janelly Maritza; Sharma, Bhisham

Textured 3D printed membrane-type metamaterials with controlled performance
pp. 296-307(12)
Authors: Johnston, William; Sharma, Bhisham

Evaluation of machine learning performance on source separated passive acoustic recordings
pp. 308-320(13)
Authors: Paprocki, Carter Allen; Barnard, Andrew; Cody, Kristin; Dare, Tyler; Newman, Peter; Taff, Derrick; Crump, Morgan

The commercial era of vessel underwater radiated noise: past, present, and future
pp. 321-332(12)
Author: Bahtiarian, Michael

Standardization of the Sottek Hearing Model-based fluctuation strength calculation algorithm
pp. 333-343(11)
Author: Sottek, Roland

Sounding the alarm in public health: The case for integrating high quality noise exposure into US health studies
pp. 344-356(13)
Authors: Grady, Stephanie; Roscoe, Charlotte; Bozigar, Matthew; Mowrer, Carson; Khatoon, Summya; Costello, Jean M.; Hystad, Perry; Peters, Junenette L.

Low natural frequency elastomeric vibration isolators for a screw chiller
pp. 357-367(11)
Author: Davenny, Benjamin

Facility and Community Collaboration on Solving a Noise Problem
pp. 368-378(11)
Authors: Wallace, Marc; Coate, David; Rosa, Patricia T.

Evaluating rural noise levels using audibility and community response
pp. 379-384(6)
Author: Connolly, Sean

Is pickle ball noise highly impulsive?
pp. 385-394(10)
Authors: Jensen, Naomi; Hord, Samuel; Irarrazabal, Francisco; Wu, Bethany

The effects of high-frequency natural sounds on ambient monitoring in Massachusetts
pp. 395-407(13)
Authors: Riegert, Matthew L.; Durham, Stephen E.

Acoustics in buildings with mass timber floor/ceiling assemblies: theory, practice and acoustical solutions.
pp. 408-418(11)
Author: Brown, Michael

2021 IBC classroom acoustics - be in the know
pp. 419-426(8)
Author: Schad, Iliana

Community acceptance of new noise sources located in quiet rural environments
pp. 427-432(6)
Author: Parzych, David J.

Rethinking significant noise impacts in rural communities
pp. 433-443(11)
Authors: Burke, Connor; Segovia, Nicholas A.

A reassessment of light rail transit noise impact based on current conditions using Federal Transit Administration guidelines
pp. 444-454(11)
Author: Towers, David Allan

Ecma standardization plan: modular instrumentation for acoustic measurements
pp. 455-461(7)
Author: Oppenheimer, Charles

Simultaneous measurement of wind turbine noise at 1.5 and 4.0 meters
pp. 462-467(6)
Authors: Bowers, Justin; Hankard, Michael; Cerio, Lessa; Thomas, Spencer

Modeling methods and measurements of noise emissions from utility-scale energy storage facilities
pp. 468-483(16)
Authors: Bowers, Justin; Hankard, Michael; Cerio, Lessa; Thomas, Spencer

A Method to Simulate Printer Noise for Use in Psychoacoustic Tests
pp. 484-497(14)
Authors: Yu, Jinghe; Liu, Yangfan; Davies, Patricia; Bolton, J. Stuart

Developments on ground blocking implementation in turbulence tool for sonic boom propagation
pp. 498-507(10)
Authors: Kapcsos, Joshua Lynn; Sparrow, Victor W.

AI in acoustics: exploring practical approaches for working professionals
pp. 508-519(12)
Authors: Pietrusinski, Nicholas; Deem, Robby; Pierce, McLean

The Quietest Year-Using Film to Educate about Noise and its Health Impacts
pp. 520-526(7)
Author: Akins, Karen

Systems Engineering (SE) method for acoustics consultants: introducing SE into complex building projects
pp. 527-538(12)
Author: Mooney, Jon W.

Developing a noise ordinance for a rural township impacted by data centers
pp. 539-547(9)
Author: Doggett, Felicia

Evaluation of sound emitted from a solar energy facility equipment pad
pp. 548-556(9)
Author: Butterfield, Emma

A Tale of Two RPMs: Comparing estimated equipment sound levels using operational parameters to measured and published levels.
pp. 557-563(7)
Author: Demske, Ginnie

Hiding in plain sight - compatible noise levels for sparsely populated areas
pp. 564-570(7)
Author: Nelson, David

Diffuse field sound absorption measurement uncertainty: A comparative study of chamber sizes and air absorption correction
pp. 571-584(14)
Authors: Moritz, Charles; Biboud, Julien

Feasibility study for a quiet chicken coop
pp. 585-592(8)
Author: Moritz, Charles

BESS Noise and Interaction with the NYC Noise Code
pp. 593-598(6)
Authors: Bove, Gene; Zybura, Jack

A multi-resolution SEA methodology for efficient modeling of large industrial spaces
pp. 599-605(7)
Author: Burns, Tom

Reducing vibration transmission from a wall-mounted VRF system
pp. 606-616(11)
Author: Fullerton, Jeffrey

Numerical and Experimental Study on Valve Impact Induced Noise and Vibration for Rotary Compressors
pp. 617-624(8)
Authors: He, Dazhuang; Tan, Shupeng SHUPENG; Cui, Yidan; Lee, Joohyun; Liu, Yangfan; Ziviani, Davide

Determining the characteristic impedance across a wide frequency range using a three-microphone impedance tube measurement
pp. 625-630(6)
Authors: Chen, Ziqi; Xiang, Ning

Quantifying the practical suitability of locally reactive fitness floor build ups.
pp. 631-642(12)
Authors: Byrick, Wilson; Julian, Joshua Derek

A multi-microphone technique for extending the upper-frequency measurement range in an acoustic impedance tube
pp. 643-652(10)
Authors: Kim, Jeong-Woo; Bolton, J. Stuart

Evaluating techniques for modeling buildings in the FHWA TNM
pp. 653-664(12)
Author: Moskus, Eric Stephen

Transforming Classrooms and Offices to Quantum Computing Labs: Renovating an Existing University Building to a Low Vibration Facility
pp. 665-673(9)
Author: Brush, Ethan

Study of ASTM C423 Repeatability and Reproducibility
pp. 674-681(8)
Author: Herreman, Kevin

Feature Analysis for Gear Growl in Electrified Powertrains
pp. 682-692(11)
Authors: Lee, Joohyun; Liu, Yangfan; Davies, Patricia; Bolton, J. Stuart

OOR and Track Defects: Analyzing Transient data with the Wavelet Transform
pp. 693-702(10)
Authors: Méndez Suárez, Cuauhtémoc; Bensing, Silas; Watry, Luke

Comparison of post-construction barriers in TNM 2.5/3.x
pp. 703-713(11)
Authors: Martin, Cole; McGuire, Simon

Some Aspects of Characterizing Vehicle Noise Using Single Event and Maximum Pass-by Level
pp. 714-724(11)
Authors: Donavan, Paul; Janello, Carrie J.

Notes on selection of measurement locations for inverse pellicular modes analysis source reconstruction
pp. 725-733(9)
Authors: Yan, Xin; Herrin, David W.; Ghaisas, Nikhil

Small wind turbine furling noise measurement
pp. 734-742(9)
Authors: Storm, Mark; Wong, Carson

Prediction and assessment of impulse noise caused by regular ball impacts in pickleball
pp. 743-749(7)
Authors: Notario Tévar, Antonio; Probst, Wolfgang

3D-printed porous ceramic liners for high-temperature noise control applications
pp. 750-760(11)
Authors: Bishop, Victoria; Godakawela, Janith; Mendez, Nina; Wei, Wei; Sharma, Bhisham

Reducing rail noise in tunnels, cuts and on viaducts using strategically placed sound absorbers
pp. 761-774(14)
Authors: Weaver, Andrew; FIGALLO, Gary Stephen; Rienstra, Lisa

Experiences and lessons learned from solar energy facility post-construction noise studies
pp. 775-786(12)
Authors: Poling, Jacob; Gardner, Conner Hurley; Conaway, Michael

A comparison of sound barrier effectiveness when using ISO 9613-2:1996 vs. ISO 9613-2:2024
pp. 787-793(7)
Authors: Davis, Spencer; Callahan, Ryan

Determining correlation between various noise evaluation testing methods for passenger vehicles
pp. 794-805(12)
Authors: Janello, Carrie J.; Donavan, Paul

Uncertainty in ASTM E492 "Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine"
pp. 806-812(7)
Author: Golden, Matthew V.

Addressing psychoacoustic uncertainty in noise codes
pp. 813-823(11)
Authors: Oppenheimer, Charles; Raley, Mike

Bioinspired acoustic metamaterials: mimicking the cuttlebone for advanced noise control applications
pp. 824-831(8)
Authors: Hardy, Kara; Sharma, Bhisham

Reconstruction of Porous Microstructure Models for Validation and Estimation of Phenomenological Acoustic Parameters
pp. 832-842(11)
Authors: Chen, Ting-Shian; Liu, Yangfan; Li, Junfei; Olatunde, Johnson Oladimeji; Thota, Manoj; Aou, Kaoru; Divi, Sathvik

A holistic look at noise regulation outcomes on communities
pp. 843-848(6)
Author: Schad, Andrew

A perspective from two decades of analyzing the error bars on outdoor sound propagation predictions
pp. 849-858(10)
Author: Wilson, Keith Keith

Understanding laboratory uncertainty and its relation to code compliance
pp. 859-875(17)
Authors: Raley, Mike; Way, Evelyn

Experimental Study of the Vibro-Acoustic Behavior of Liquid Applied Spray Damping (LASD) Coated Steel Panels
pp. 876-884(9)
Authors: Neihguk, David; Suh, Sam; Herrin, David W.

AIIC testing of floating floor systems: evaluating the effects of adhesives and fasteners
pp. 885-891(7)
Authors: Roselli, Nicholas; Harkin, Sean; Hefty, Kristof; Kern-Maracz, Trish; Schnitta, Bonnie S.

Comparison of pressure release boundary condition and in-situ method for determining acoustic free velocity
pp. 892-903(12)
Authors: Neihguk, David; Herrin, David W.; Ghaisas, Nikhil

Method of Workload Generation for Rack Enclosed Systems with Open Source Tools
pp. 904-915(12)
Author: Masterson, Colin E.

Integrating climate adaptation and noise mitigation: a review of transportation noise pollution under climate change
pp. 916-926(11)
Authors: Etuke, Julius Ogaga; Naseri, Mojtaba; Okegbola, Micheal Oketunde; Abiodun, Pelumi O.; Owolabi, Oludare Adegbola

Predicting the Impact of Climate Change on Aircraft Noise Propagation in the National Airspace System (NAS)
pp. 927-937(11)
Authors: Ajala, Abiola Olayinka; Owolabi, Oludare Adegbola; Adeyemi, Sarah Halleluyah; Shobowale, Olorunfunmi Samuel; Adeniran, Opeyemi Taiwo; Nyarko, Kofi; Abiodun, Pelumi O.

Effect of construction noise and control: a literature review
pp. 938-949(12)
Authors: Akosile, Samuel Sola; Ige, Michael Oluwafemi; Omomola, Blessing; Sanni, Femi Joseph; Akosile, John Olawale; Abiodun, Pelumi O.; Owolabi, Oludare Adegbola

Automotive HVAC Blower Blade Pass Noise Sensitivity - A Case Study
pp. 950-960(11)
Authors: Ravineala, Tudor; Kurniawan, Darius; Bennouna, Saad

Reciprocity validation of a low frequency volume velocity source inside various enclosures
pp. 961-969(9)
Authors: Smither, Matt; Herrin, David W.

Investigating the correlation between the acoustic performance of solid and louvered acoustic screens for outdoor applications
pp. 970-979(10)
Author: Koukounian, Viken

Silence is sustainable: achieving ASHRAE 189.1 & LEED IEQ 9.0 compliance
pp. 980-984(5)
Authors: Burley, Dan; Wallace, Brandon; Taylor, Danielle

CFD modeling of design impacts on aerodynamic, acoustic and thermal performance of noise control solutions for air-cooled chillers
pp. 985-990(6)
Authors: Koukounian, Viken; Mortazavi, Hamid

Quiet classrooms, focused minds: meeting national & CHPS acoustical standards
pp. 991-996(6)
Authors: Burley, Dan; Taylor, Danielle; Wallace, Brandon