INTER-NOISE and NOISE-CON Congress and Conference Proceedings
ISSN 0736-2935 (Print)



The Noise-Con conference proceedings are sponsored by INCE/USA and the Inter-Noise proceedings by I-INCE. NOVEM (Noise and Vibration Emerging Methods) conference proceedings are included. All NoiseCon Proceedings one year or older are free to download. InterNoise proceedings from outside the USA older than 10 years are free to download. Others are free to INCE/USA members and member societies of I-INCE.
Publisher: Institute of Noise Control Engineering on behalf of International Institute of Noise Control Engineering
- Membership Information
- INCE Subject Classification
- Ingenta Connect is not responsible for the content or availability of external websites
Research Articles
Tutorial on Acoustic Fluid Loading of Structures
pp. 1-19(19)
Author:
Hambric, Stephen
Research on the Layout Optimization of Acoustic Radiation Power Flow Reinforcement Based on Weight-Guide method
pp. 20-29(10)
Authors:
Teng, Xiaoyan; Li, Qiang; Jiang, Xudong; Yan, Zhihua
Research on Optimization method of power flow of cylindrical shell stiffener based on BESO
pp. 30-41(12)
Authors:
Teng, Xiaoyan; Yan, Zhihua; Jiang, Xudong; Li, Qiang
CHARACTERIZATION OF TRAILING EDGE BROADBAND NOISE FROM WIND TURBINE BLADES
pp. 42-53(12)
Authors:
Maddula, Satya Prasad; Bhargava, Vasishta; Swamy, Naidu N.V.
Impact sound pressure values - Field measurements for different configurations of concrete slabs on the ground
pp. 54-65(12)
Author:
Larsen, Bernt Mikal
COVID Teaching of acoustics and noise control: Lab in a box for experiments at home
pp. 66-70(5)
Author:
Dance, Stephen
Experimental study of particle dampers applied to wind turbine blades to reduce low-frequency sound emission
pp. 71-82(12)
Authors:
Prasad, Braj Bhushan; Duvigneau, Fabian; Juhre, Daniel; Woschke, Elmar
Analysis of the acoustical environment of classrooms in three brazilian public schools through measurements and 3d simulation
pp. 91-99(9)
Authors:
Horst Andrade, Fernanda; Scoczynski Ribeiro, Rodrigo; Teixeira Braz César, Manuel
Distortion measurements of sound pressure level generated by a pistonphone
pp. 100-111(12)
Authors:
Bacelar Milhomem, Thiago Antônio; Martins Defilippo Soares, Zemar; Palmeira Ripper, Gustavo; Hanes, Peter; Solano Mena, Adrian; Ariel Serrano, Federico; Guevara Chuquillanqui, Giancarlos Miguel; Ayala Breña, Juan Pablo
Broadband force spectrum of a pump-jet under inflow turbulence
pp. 112-122(11)
Authors:
Shi, Shuaikang; Xiuchang, Huang; zhiqiang, Rao; hongxing, Hua
Annoyance due to road traffic noise: an attempt to describe the effects of non-acoustic factors
pp. 123-131(9)
Author:
Gjestland, Truls
Soundscape: Progress in the past 50 years and challenges in the next 50 years
pp. 132-139(8)
Author:
Kang, Jian
Application of loudness level to temporally varying sounds
pp. 140-151(12)
Authors:
Kuwano, Sonoko; Namba, Seiichiro
Design and optimization of acoustic liners with a shear grazing flow: OPAL software platform applications
pp. 152-163(12)
Authors:
Roncen, Remi; Vuillemin, Pierre; Klotz, Patricia; Simon, Frank; Méry, Fabien; Sebbane, Delphine; Piot, Estelle
Insertion loss (IL) of finite sound barriers of different contours - An introduction to geometrical solutions in 3-D space
pp. 164-174(11)
Author:
Rosenhouse, Giora
Turbulent model validations with CFD/wind tunnel test and application to SEA for wind noise prediction
pp. 175-186(12)
Authors:
Aizawa, Kai; Terakado, Susumu; Komada, Masashi; Morita, Hidenori; DeJong, Richard; Sorenson, Steve
Community noise from urban air mobility (UAM) and its control by traffic management
pp. 187-193(7)
Author:
Bauer, Michael
The measurements of crowd noise in a large waiting hall of ShenYang Station in China
pp. 194-205(12)
Authors:
Liu, Hongshan; Ma, Hui; Wang, Chao
A case study of noise pollution levels during the restrictions period due to COVID-19.
pp. 206-214(9)
Authors:
Montes-González, David; Barrigón-Morillas, Juan Miguel; Bejarano-Quintas, Ana Cristina; Parejo-Pizarro, Manuel; Rey-Gozalo, Guillermo; Vílchez Gómez, Rosendo; Atanasio-Moraga, Pedro
Analysis of the interaction of helmholtz resonators in periodic acoustic metamaterials depending on its orientation with the acoustic source.
pp. 215-226(12)
Authors:
Ramírez Solana, David; Castiñeira-Ibáñez, Sergio; Bravo-Plana-Sala, Jose Maria; Sánchez-Pérez, Juan Vicente; Redondo, Javier; Picó, Rubén
Measurement and Analysis of Torque Ripple in Inverter Driven Electric Machines
pp. 227-235(9)
Author:
Marks, Mitchell
Optimization of Low Noise Blade of Small Axial Fan at Low Reynolds Number
pp. 236-256(21)
Authors:
Yu, Peixun; Bai, Junqiang; Han, Xiao
Prediction and Improvement of Aircraft Cabin Acoustics using Statistical Energy Analysis and Sound Quality Evaluation
pp. 257-266(10)
Authors:
Turkdogru Gurun, Nurkan; Chen, Jonathan; Ward, Frederick; Wilcox, Matthew; Luo, Zhiming
Acoustic design tools for estimation of sound insulation performance of wood wall and floor assemblies
pp. 267-274(8)
Authors:
Qian, Cheng; Hu, Lin; Dagenais, Christian; Gagnon, Sylvain
Optimization of space-constrained micro-perforated absorbers by causality criteria
pp. 275-286(12)
Authors:
Bravo, Teresa; Maury, Cedric
Enhanced modal matching method for perforated and micro-perforated partitions
pp. 287-297(11)
Authors:
Maury, Cédric; Bravo, Teresa
A numerical investigation of flow-induced cavity noise control
pp. 298-306(9)
Authors:
Song, Zhenan; Chang, Daoqing; Sun, Hongling
Lighthill's analogy applied to a automotive turbocharger compressor
pp. 307-313(7)
Authors:
Freidhager, Clemens; Heinisch, Martin; Renz, Andreas; Schoder, Stefan; Kaltenbacher, Manfred
Uncertainty in the standardized method "Characterization of the acoustic properties of road surfaces" by CEN TC227 WG5
pp. 314-322(9)
Authors:
van Blokland, Gijsjan; Goubert, Luc
Experimental investigation on acoustics and efficiency of rotor configurations for electric aerial vehicles
pp. 323-334(12)
Authors:
König, Ronja; Gerlach, André; Schmidt, Henry; Stumpf, Eike
Sound field reproduction using multilayer equivalent source method
pp. 335-341(7)
Authors:
Hong, Xi; Zeng, Xiangyang; Bokai, DU
Effect of different magnets and iron-platelets on the low frequency performance of membrane sound absorber
pp. 342-347(6)
Authors:
Zhao, Junjuan; Zhu, Liying; Li, Xinyun; Wang, Yueyue; Wang, Wenjiang; Li, Xianhui; Liu, Yunan
A two-zone sound field reproduction based on the region energy control
pp. 348-354(7)
Authors:
Du, Bokai; Zeng, Xiangyang; Wang, Haitao
Diffuse sound absorption modelling of complex finite absorbers using a hybrid deterministic-statistical energy analysis approach
pp. 355-366(12)
Authors:
Van hoorickx, Cédric; Didier, Paul; Reynders, Edwin
Characterization of multi-layer porous media in an impedance tube
pp. 367-377(11)
Authors:
Roncen, Remi; Fellah, Zine El Abiddine; Ogam, Erick
How to make sell and buy quiet a reality in Britain
pp. 378-387(10)
Authors:
Wu, Tao; Brereton, Paul; Patel, Jacqueline
The theoretical analysis and simulation of acoustic absorber for nonlinear shunted loudspeaker
pp. 388-393(6)
Authors:
Wang, Wenjiang; Li, Xianhui; Zhao, Junjuan; Zhang, Peng; Li, Xinyun; Zhu, Liying; Wang, Yueyue
Acoustic space filling curve metamaterials for grazing flow in Jet engine inlets
pp. 394-406(13)
Authors:
Glover, Jennifer; O'Boy, Dan
Gazex avalanche control system noise and vibration assessment
pp. 407-417(11)
Author:
Bollard, Paul
Global feedforward active noise control using a linearly constrained loudspeaker beamformer and a sensor interpolation approach
pp. 418-428(11)
Authors:
Hsu, Yi-Cheng; Bai, Mingsian R.; Chenghung, Ma,
Influence of the acoustic structures placement on the measurements in a reverberation room
pp. 429-433(5)
Authors:
Wang, Yueyue; Li, Xianhui; Zhao, Junjuan; Li, Xingyun; Zhu, Liying; Wang, Wenjiang
Realizing a Self-powered Real-time Monitoring System on High-speed Trains
pp. 434-441(8)
Authors:
Lai, S.K.; Wang, C.; Zhang, L.H.; Ni, Y.Q.
Study on psychological evaluation model of a good conversation in knowledge creative activity by multiple people
pp. 442-449(8)
Authors:
Tsujimura, Sohei; Yairi, Motoki; Okita, Takayoshi; Nidaira, Mayu
Community noise assessment of urban air mobility vehicle operations using the FAA Aviation Environmental Design Tool
pp. 450-461(12)
Authors:
Rizzi, Stephen; Rafaelof, Menachem
Development of a metric for predicting people's responses to gusting wind noise in automobiles
pp. 462-473(12)
Authors:
Carr, Daniel; Davies, Patricia
AIRNOISEUAM: An Urban Air Mobility Noise-Exposure Prediction Tool
pp. 474-485(12)
Authors:
Li, Jinhua; Zheng, Yun; Rafaelof, Menachem; Ng, Hok K.; Rizzi, Stephen A.
Combination of gated recurrent unit and Network in Network for underwater acoustic target recognition
pp. 486-492(7)
Authors:
Yang, Shuang; Zeng, Xiangyang
Deep Learning-based Health Indicator for Better Bearing RUL Prediction
pp. 493-498(6)
Authors:
Kim, Taewan; Lee, Seungchul
Operational noise optimization of aircraft approaches - Initial findings
pp. 499-507(9)
Authors:
Moberg, Bengt; Johansson, Anders; Rignér, Johan; Näsman, Per
Design and optimization of acoustic liners with a shear grazing flow: OPAL software platform description
pp. 508-518(11)
Authors:
Simon, Frank; Roncen, R.; Vuillemin, P.; Klotz, P.; Méry, Fabien; Piot, E.
Validation setup for the investigation of aeroacoustic and vibroacoustic sound emission of confined turbulent flows
pp. 519-525(7)
Authors:
Maurerlehner, Paul; Schoder, Stefan; Floss, Sebastian; Tieber, Johannes; Steiner, Helfried; Brenn, Günter; Kaltenbacher, Manfred
Determination of passenger car noise equivalent for mid-sized cities in India
pp. 526-539(14)
Authors:
Yadav, Adarsh; Parida, Manoranjan; Kumar, Brind
Perception of the Home Environment. The 2019 Study
pp. 540-547(8)
Author:
Van Poll, Ric
Sound absorption based on Micro-perforated panels and Acoustic Black Hole principle
pp. 548-555(8)
Authors:
Zhang, Xiaoqi; Cheng, Li
Virtual reality simulated aircraft flyovers: Influence of the landscape on the overall pleasantness of the environment.
pp. 556-567(12)
Authors:
Dedieu, Romain; Lavandier, Catherine; Aalmoes, Roalt; Lania, Henk; Legriffon, Ingrid; Boullet, Isabelle; Iemma, Umberto
Development of acoustic mufflers for cabin noise reduction in Orion spacecraft
pp. 568-576(9)
Authors:
Dandaroy, Indranil; Chu, S. Reynold; Dornak, Jeffrey; Allen, Christopher S.
An investigation into the impact of unmanned aerial vehicles on soundscape perception in urban and rural environments
pp. 577-588(12)
Authors:
Nicholls, Rory; Martinez, Antonio Torija
Two-dimensional finite difference-time domain analysis of focus boom noise with velocity disturbance in the atmosphere
pp. 589-597(9)
Authors:
Tsuchiya, Takao; Kanamori, Masashi
Aeroacoustic simulation of a cross-flow fan using lattice Boltzmann method with a RANS model
pp. 598-609(12)
Authors:
Kusano, Kazuya; Furukawa, Masato; Sakoda, Kenichi; Fukui, Tomoya
Visualization of magnetic field corresponding to acoustic signal and estimation of magnetic source based on symmetry of magnetic field distribution
pp. 610-618(9)
Authors:
Kurosawa, Takuto; Ishizuka, Eri; Oikawa, Yasuhiro; Konno, Minoru; Asakawa, Masatoshi; Suzuki, Yuya
Use of a transient SEA for calculation of structure-borne interior noise in trains from an induction motor controlled by multi-mode PWM
pp. 619-625(7)
Authors:
Tanabe, Yosuke; Yoshizawa, Takashi; Sugimoto, Shinji; Hara, Takafumi
Aircraft Noise Management
pp. 626-634(9)
Authors:
Remigi, Francesca; Sepulcri, Daniele; Wisniewska, Shanti; Nayer Nouri, Kalil
High Lift Device Modifications for Reducing Airport Noise - A Review
pp. 635-640(6)
Authors:
Allaei, Daryoush; Reydel, Benjamin; Rall, James
Uncertainty of sound power measurements of a reference sound source using the AHRI Standard 230 sound intensity method
pp. 641-647(7)
Authors:
Eichelberger, Curtis; Bauch, Paul
Simulation research on low frequency sound absorption of monostable metamaterials
pp. 648-652(5)
Authors:
Xing, Tuo; Li, Xianhui; Gai, Xiaoling; Cai, Zenong; Guan, Xiwen
Route survey research of US military aircraft at Futenma Air Base and Kadena Air Base in Okinawa Prefecture
pp. 653-658(6)
Author:
Tokashiki, Takeshi
Phase calibration method for microphone array based on multiple sound sources
pp. 659-669(11)
Authors:
Jiang, Bo; Liu, XiaoQin; Wu, Xing
Review of acoustically related design factors for three recent Los Angeles area music studios.
pp. 670-681(12)
Author:
Brown, Michael
Numerical study in sound absorption ability of curtain in random incidence condition
pp. 682-688(7)
Authors:
Cai, Zenong; Li, Xianhui; Gai, Xiaoling; Xing, Tuo; Wang, Fang; Guan, Xiwen
Underwater acoustic communication using nonlinear frequency modulation waveform with low side-lobe characteristics
pp. 689-697(9)
Authors:
An, Jeongha; Ra, Hyoungin; Youn, Changhyun; Kim, Kiman
Design of noise barriers for the mitigation of construction noise
pp. 698-702(5)
Author:
Lee, Heow Pueh
Psycho-acoustic evaluation of the automotive acoustic comfort using vibro-acoustic prediction methods
pp. 703-714(12)
Authors:
Miqueau, Valentin; Parizet, Etienne; Germes, Sylvain
Effects of annular acoustic black holes on sound radiated by cylindrical shells
pp. 715-721(7)
Authors:
Guasch, Oriol; Deng, Jie
Predicting vibration transmission across junctions using diffuse field reciprocity
pp. 722-733(12)
Authors:
Stalmans, Wannes; Van hoorickx, Cédric; Reynders, Edwin
Impact sound prediction of finite floor structures with the modal transfer matrix method
pp. 734-745(12)
Authors:
Vastiau, Jasper; Van hoorickx, Cédric; Reynders, Edwin
ATEFA - A first German approach on UAM community noise and air-taxi certification
pp. 746-751(6)
Authors:
Bauer, Michael; Redmann, Daniel; Weilandt, Lis
Acoustical modelling of a Swedish 13th century church ruin, and its use for musical production.
pp. 752-756(5)
Author:
Holm, Sebastian
An adjustable bearing seat stiffness element for targeted vibration influencing
pp. 757-766(10)
Authors:
Sturm, Carolin; Lindenmann, Andreas; Gwosch, Thomas; Matthiesen, Sven
Measuring the force due to standard tapping machine and floor impedance for ASTM standards
pp. 767-777(11)
Authors:
Girdhar, Sunit; Barnard, Andrew R.; LoVerde, John; Dong, Wayland
Subjective and objective evaluation of the impact and airborne sound insulation of multi-unit residential buildings
pp. 778-786(9)
Authors:
Andargie, Maedot S.; Touchie, Marianne; O'Brien, William
Comparison of two community noise models applied to a NASA urban air mobility concept vehicle
pp. 787-798(12)
Authors:
Page, Juliet; Rizzi, Stephen A.; Cheng, Rui
Community noise from a drone delivery distribution center: challenges and options
pp. 799-809(11)
Author:
Poling, Jacob
Soundscape composition analysis combined with acoustics and musicology: a case study on the music piece of Daybreaking
pp. 810-816(7)
Authors:
Ju, Zhanjie; Deng, Zhiyong; Xue, Xushan; Liu, Aili
Optimization of Damping Configurations in a Plate Embedded with ABH Array
pp. 817-828(12)
Authors:
Liang, Haoming; Bao, Yue; Liu, Xiandong; Shan, Yingchun; He, Tian
An isogeometric formulation of locally-conformal perfectly matched layer for acoustic scattering problems
pp. 829-833(5)
Authors:
Mi, Yongzhen; Yu, Xiang
Wavenumber domain analysis of full-band energy harvesting and damping dissipation characteristics of plate embedded with heterogeneous ABH array
pp. 834-844(11)
Authors:
Bao, Yue; Liang, Haoming; Liu, Xiandong; Shan, Yingchun; He, Tian
Computationally efficient source grid selection and source interpolation in computational aeroacoustics applied to an axial fan.
pp. 845-853(9)
Authors:
Wurzinger, Andreas; Kaltenbacher, Manfred; Schoder, Stefan
Evaluation method of military aircraft noise using AI analysis of aircraft images
pp. 854-862(9)
Authors:
Fujita, Etsushi; Higashioka, Taichi; Sugiura, Manabu; Kohashi, Osamu
Comparison of quadrature and regression based generalized polynomial chaos expansions for structural acoustics
pp. 863-874(12)
Authors:
Walters, Gage; Wixom, Andrew; Martinelli, Sheri
Applicability of MEMS microphones for environmental sound level monitoring
pp. 875-885(11)
Authors:
Oatley, James; Storey, Craig
Loudspeaker-based sound reproduction for evaluating noise transmission into the car cabin
pp. 886-893(8)
Authors:
Kuntz, Matthieu; Müller, Gregor-Johannes; Kalinke, Peter; Seeber, Bernhard U.
Method for localisation of sound sources and aggregation to an acoustic centre
pp. 894-906(13)
Authors:
Weber, Yannik; Behrendt, Matthias; Gohlke, Tobias; Albers, Albert
Case study - lesson plan for noise control engineering concepts for use in ABET accredited engineering programs
pp. 907-912(6)
Authors:
Wang, Lily; Beamer, Bryan; Moore, Keegan J.; Krainc, Katie
Community Acceptance of Drone Noise
pp. 913-924(12)
Author:
Thalheimer, Erich
Traveling-wave control of the bending wave in a beam for high quality sound radiation
pp. 925-928(4)
Authors:
Lee, Ki-Ho; Ih, Jeong-Guon; Jung, Donghyun
Round-robin testing on Sound power level measurement for Reference Sound Source and Office printer
pp. 929-935(7)
Author:
Shimoda, Kohei
Statistical assessment of A-weighted sound power level for printer with electrophotographic engine
pp. 936-941(6)
Author:
Shimoda, Kohei
Design and simulation of Helmholtz resonator assembly used to attenuate tire acoustic cavity resonance noise
pp. 942-953(12)
Authors:
Zhao, Wei; Liu, Xiandong; Shan, Yingchun; He, Tian
3D shape optimization of loudspeakers
pp. 954-964(11)
Authors:
Andersen, Peter Risby; Cutanda Henríquez, Vicente; Aage, Niels; Kook, Junghwan
Vibrational energy distribution in plate excited with random white noise
pp. 965-969(5)
Authors:
Victor, Tyrode; Totaro, Nicolas; Maxit, Laurent; Le Bot, Alain
- Access Key
- Free content
- Partial Free content
- New content
- Open access content
- Partial Open access content
- Subscribed content
- Partial Subscribed content
- Free trial content