INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Flow Induced Interior Noise Prediction of a Passenger Car
pp. 1-10(10)
Authors: Schell, Alexander; Cotoni, Vincent

Active Cancellation of Exhaust Noise over Broad RPM Range with Simultaneous Exhaust Sound Enhancement
pp. 11-15(5)
Authors: Riddle, Jack; Frei, Tom; Bemman, Ya-Juan; Padalkar, Ishang; Wu, Sihui

A Research on Brand Sound Positioning and Implementing with Active Sound Design
pp. 16-21(6)
Authors: Chang, Kyoung-Jin; Moon, So Youn; Park, Dong Chul; Yun, Myung Hwan; Park, Sunghwan; Kim, Seonghyeon

Traditional and Electronic Solutions to Mitigate Electrified Vehicle Driveline Noises
pp. 22-27(6)
Authors: Valeri, Frank; Lagodzinski, Jim; Reilly, Scott; Miller, John

A Systematic Approach to Engine Sound Design for Enhancing Sound Character by Active Sound Design
pp. 28-39(12)
Authors: Kim, Seonghyeon; Lee, Seung Min; Park, Dong Chul; Chang, Kyoung-Jin; Lee, Sang Kwon

System for Augmenting the In-Cabin Sound of Electric Vehicles
pp. 40-46(7)
Authors: Maunder, Matthew; Munday, Ben

A Novel Method for Objective Evaluation of Interior Sound in a Passenger Car and Its Application to the Design of Interior Sound in a luxury passenger car
pp. 47-53(7)
Authors: Lee, Seung Min; Kim, Seonghyeon; Lee, Sang Kwon; Park, Dong Chul

A Desktop Procedure for Measuring the Transmission Loss of Automotive Door Seals
pp. 54-61(8)
Authors: Thor, Weimin; Bolton, J. Stuart

Integration of an End-of-Line System for Vibro-Acoustic Characterization and Fault Detection of Automotive Components Based on Acoustic Particle Velocity Measurements
pp. 62-67(6)
Authors: Comesana, Daniel Fernandez; Tijs, Emiel; Pousa, Graciano Carrillo

Electric Vehicle Detectability:Impact of Artificial Noise on Ability of Pedestrians to Safely Detect Approaching Electric Vehicles
pp. 68-77(10)
Authors: Roan, Michael; Glaser, Dan; Neurauter, Michael; Moore, Douglas

Evaluation of Multiple Electric Vehicle Sources and New Concepts Regarding Speed-Dependency
pp. 78-85(8)
Authors: Steinbach, Lisa; Altinsoy, Ercan; Rosenkranz, Robert

SEA Model Development for Cabin Noise Prediction of a Large Commercial Business Jet
pp. 86-92(7)
Authors: Dande, Himanshu; Wang, Tongan; Maxon, John; Bouriez, Joffrey

Noise Control Capability of Structurally Integrated Resonator Arrays in a Foam-Treated Cylinder
pp. 93-102(10)
Authors: Allen, Albert; Schiller, Noah; Rouse, Jerry

Target Setting and Prediction for Cabin Noise and Vibration in Aircraft Development
pp. 103-114(12)
Authors: von Werne, Dirk; Gils, Anneleen Van; Olbrechts, Thierry; Orlando, Stefano; Bosmans, Ivan

The Dual Phase Twin Synchronous Belt Drive
pp. 115-121(7)
Author: Yuan, Jing

The Effect of HVAC Buffeting on Automatic Speech Recognition Systems
pp. 122-126(5)
Author: Wheeler, Joshua

Modelling and Optimization of Plug Flow Mufflers in Emission Control Systems
pp. 127-135(9)
Authors: Puthuparampil, Jobin; Pong, Henry; Sullivan, Pierre

Effect of Screens and Pinhole Size on Measured Fluctuating Surface Pressures Using a Micro-Electro-Mechanical Microphone Array
pp. 136-143(8)
Authors: Todter, Chris; Marchetto, Christophe; Robin, Olivier; Berry, Alain; Bremner, Paul

Inverse Method on Vehicle' Panels for Wind Noise Source Identification
pp. 144-158(15)
Author: Baudet, Guillaume

Characteristics of Non-stationary Sources of Wind Noise Measured with a Surface Pressure Array
pp. 159-167(9)
Authors: Bremner, Paul; Clifton, Scott; Todter, Chris

Experimental and Numerical Investigations on Control Methods of Cavity Tone by Blowing Jet in an Upstream Boundary Layer
pp. 168-176(9)
Authors: Yokoyama, Hiroshi; Minato, Taiki; Adachi, Ryo; Iida, Akiyoshi

Digital Aeroacoustics Design Method of Climate Systems for Improved Cabin Comfort
pp. 177-189(13)
Authors: Biermann, Jan; Kim, Minsuk; Mann, Adrien; Neuhierl, Barbara

An Analysis on Automotive Side Window Buffeting using Scale Adaptive Simulation
pp. 190-203(14)
Authors: Ulli, Kishore; Gade, Upender Rao

Optimizing Transmission Loss for Lightweight Body Structures
pp. 204-209(6)
Authors: Sorenson, Steve; Ebbitt, Gordon; Smith, Scott; Remtema, Todd

Acoustically Absorbing Lightweight Thermoplastic Honeycomb Panels
pp. 210-219(10)
Authors: Jonza, James; Yoo, Taewook; Herdtle, Thomas; Kalish, Jeffrey; Gerdes, Ronald; Eichhorn, Georg

Assessment of Lightweight Automotive Glass Solutions on Interior Noise Levels & Sound Quality
pp. 220-225(6)
Authors: Tousignant, Todd; Polasani, Shivani; Bhatia, Vikram; Govindswamy, Kiran; Fisher, W. Keith

Some Thoughts on Dissipative Sound Package Systems
pp. 226-231(6)
Authors: Saha, Pranab; Deshpande, Satyajeet

Multi-Physics Simulation of Ultra-Lightweight Carbon Nanotube Speakers
pp. 232-238(7)
Authors: Asgarisabet, Mahsa; Barnard, Andrew

Two-Component Injection Molding as a Noise Countermeasure for Polycarbonate Glazing
pp. 239-244(6)
Authors: Gasworth, Steven; Terragni, Matteo; Nilajkar, Vasudev

Optimization of Electric Vehicle Exterior Noise for Pedestrian Safety and Sound Quality
pp. 245-252(8)
Authors: Tousignant, Todd; Eisele, Georg; Govindswamy, Kiran; Steffens, Christoph; Tomazic, Dean

The Analysis of the Stiffness-Damping Parameters of a H-Bahn Vehicle
pp. 253-262(10)
Authors: Zhang, Xingyu; Hu, Sanbao; Yang, Bo; Zhang, Manchuang

Transient Vibration Simulation of Motor Gearbox Assembly Driven by a PWM Inverter
pp. 263-271(9)
Authors: Tanabe, Yosuke; Hoshino, Katsuhiro; Watanabe, Masanori; Inoue, Akira; Yamasaki, Masaru; Hara, Takafumi

Career Lessons Learned from Laymon Miller and Others
pp. 272-276(5)
Author: Barnes, James D.

Measuring and Modeling Wind Noise
pp. 277-289(13)
Author: DeJong, Richard

Microphone Array Measurement Based Contribution Analysis of Aeroacoustic Noise Sources to Interior Noise Of Automobiles
pp. 290-297(8)
Authors: Hwang, Seongil; Lee, Myunghan; Ih, Kang-Duck; Kang, Jungoo; Kim, Youngkey; Kim, Yong-Joe

Analytical and Boundary Element Solutions to Rectangular and Circular Bulk-Reacting Lined Ducts
pp. 298-306(9)
Authors: Li, Jundong; Wang, Peng; Wu, T. W.; Herrin, David W.

Radiated Shipboard Noise From a Research Vessel in the Great Lakes
pp. 307-315(9)
Author: Barnard, Andrew R.

Upgraded Vibration Isolation of Dry-Type Transformer Cores Within an Electrical Unit Substation
pp. 316-323(8)
Author: Fullerton, Jeffrey L.

Turbine Acoustic Enclosures
pp. 324-328(5)
Author: Fuzak, Corey A.

Absorption Characteristics of Acoustic Resonators Combined with Porous Foam
pp. 329-339(11)
Authors: Schiller, Noah H.; Allen, Albert R.

Transportation Noise Exposure Is Strongly Correlated with Increased Morbidity and Mortality
pp. 340-347(8)
Author: Fink, Daniel J.

Development of a GenSet Locomotive Noise Contour Model and Comparison with Measurements
pp. 348-354(7)
Author: Mooney, Jon W.

Effect Of Corrosion on Noise-Vibration-Harshness Characteristics and Performance of a Cold End Exhaust System
pp. 355-362(8)
Authors: Dholaria, Jagdish; Mee, Scott; Rose, Brian; Shappell, Charles; Joshi, Bharat

Active Control of Vibrations Using an Audio Signal Processor
pp. 363-371(9)
Authors: Algermissen, Stephan; Monner, Hans Peter

Real Time Helicopter Noise Modeling for Pilot Community Noise Awareness
pp. 372-380(9)
Author: Greenwood, Eric

Noise Suppression in Low Pressure Hydraulic Systems
pp. 381-387(7)
Authors: Pedigo, Nathaniel R.; Salmon, Ryan; Gruber, Elliott; Cunefare, Kenneth A.

Field Measured Variation of Low Frequency Impact Noise in a Wood Frame Building.
pp. 388-393(6)
Author: Byrick, Wilson R.

Effect of Gear Tooth Friction on the Vibro-Acoustics of Hypoid Gears
pp. 394-403(10)
Authors: Gopalakrishnan, Srikumar C.; Wang, Yawen; Lim, Teik C.

Case Study: Measuring Vibration Transmission from Roadway to a Highly-Sensitive Building
pp. 404-409(6)
Authors: Hellewell, Kyle; Meszaros, Steve

A Method of Enhancing Speech Privacy
pp. 410-413(4)
Authors: Green, Edward R.; Engels, Bret; Krasnov, Alexey; Corden, Barry

Flyover Noise Simulation Using NASA's Coupled Aircraft System Noise Prediction and Auralization Frameworks
pp. 414-421(8)
Authors: Tuttle, Brian C.; Aumann, Aric R.; Rizzi, Stephen A.; Jones, Jeremy J.; Lopes, Leonard V.

Budget vs. Acoustics: Get in the Game Early, Play Like a Team, Win
pp. 422-427(6)
Author: Knorr, Hannah D.

A Regulatory-Approved Regional Approach to Noise Management in Alberta's Industrial Heartland
pp. 428-434(7)
Authors: Bibby, Chris; Danielson, Laurie; Everton, Pascal

Hydraulic Fluid-Borne Noise Measurement and Simulation for Off-Highway Equipment
pp. 435-443(9)
Authors: Liu, Jinghao; Suh, Sanghoon; Yang, Yuzhen

Rotorcraft Acoustic Flight Testing for Community Noise Reduction
pp. 444-452(9)
Author: Watts, Michael E.

Pre-College Noise Control Education at Michigan Technological University
pp. 453-460(8)
Authors: Penhale, Miles B.; Barnard, Andrew R.

Transformation of the Subjective Magnitudes of Noise Discomfort of the Micro Commercial Vehicles into Their Corresponding Rating Scales
pp. 461-468(8)
Authors: Shen, Yang; Li, Dou; Huang, Yu; Huang, Yuanyi; Wang, Haijun; Jiang, Weikang

Method of Inverse-Square Law Qualification of Hemi-Anechoic Chambers for Parallelepiped Measurement Surfaces in ISO 3744
pp. 469-476(8)
Author: Shimoda, Kohei

Use of CNT Thin-Film Assemblies as Microphones Through Hot-Film Anemometry
pp. 477-484(8)
Authors: Thiery, Micaela M.; Barnard, Andrew R.

Boundary Measurements in a Reverberation Chamber and Implications on Acoustic Enclosures
pp. 485-493(9)
Author: Copley, David C.

Performance Evaluation of Hard Disk Drives in Noisy Environments
pp. 494-504(11)
Authors: Dutta, Trinoy; Barnard, Andrew R.

Active Noise Control of Automotive Exhaust Noise Using Carbon Nanotube Speakers
pp. 505-511(7)
Authors: Prabhu, Suraj; Barnard, Andrew

Analyzing The Causes of Failure of Hard Disk Drives Due to Acoustic Noise with Its Modal Parameters
pp. 512-517(6)
Authors: Parmar, Siddharth Yogesh; Dutta, Trinoy; Barnard, Andrew R.; Van Karsen, Charles D.

New Engine Tunnel Insulation System for Commercial Trucks
pp. 518-526(9)
Author: Luo, Zhiming

Optimization of Machinery Noise in a Bauxite Mine Using Genetic Algorithm
pp. 527-537(11)
Authors: Rao, D. S.; Tripathy, D. P.

Mitigating the Effects of Crossfit Weight Drops with an Inertia Base System
pp. 538-546(9)
Authors: Sherren, Richard S.; Waters, Angela; Smith, Scott Walker; Austin, Aaron C.

Improved Low-Frequency Broadband Absorption Using 3D Folded Cavity Acoustic Liners
pp. 547-554(8)
Authors: Chambers, Andrew T.; Manimala, James M.; Jones, Michael G.

Redesign of Rotor and Stators for Noise Reduction of Continuous Miner Scrubber Fan
pp. 555-562(8)
Authors: Schwartz, Kyle Wayne; Burdisso, Ricardo A.; Langford, Matthew; Ravetta, Patricio Alberto

Wavenumber Processing of Accelerometers Embedded in Tires
pp. 563-572(10)
Author: Dare, Tyler P.

The Blue Angel - News
pp. 573-579(7)
Author: Fabris, Christian

Descriptors of Sound From HVAC&R Equipment
pp. 580-588(9)
Authors: Sung, Weonchan; Davies, Patricia; Bolton, John Stuart

Development of an Aircraft Intercom Replication System for Assessment of In-Flight Intercom Acoustic Sound Pressure Levels
pp. 589-596(8)
Authors: Yang, Silin; Price, Andrew; Ghinet, Sebastian; Wickramasinghe, Viresh; Chen, Eric; Grewal, Anant

Evaluation of Test Specimen Perimeter Sealing Material's Impact On Laboratory Testing of Diffuse Field Sound Absorption
pp. 597-604(8)
Author: Seward, Brett J.

Damping and Phase Accumulation in Finite and Infinite Structure
pp. 605-611(7)
Authors: Conlon, Stephen C.; Feurtado, Philip A.

Improved Silencer Design Specifications for Representative Mine Conditions
pp. 612-619(8)
Authors: Calizaya, Felipe; Bhattacharyya, Sekhar; Mumford, Brenton

Comparison of Low Wavenumber Models for Turbulent Boundary Layer Excitation
pp. 620-628(9)
Authors: Lysak, Peter D.; Bonness, William K.; Fahnline, John B.

Chiller Sound Radiation Measurements & Modeling
pp. 629-636(8)
Authors: Wells, Stephen M.; Brungart, Timothy A.; Hambric, Stephen A.

Design of Low Speed Rim Driven Ventilation Fan for Minimum Noise
pp. 637-644(8)
Authors: Hurtado, Mark Pastor; Wu, Daniel; Burdisso, Ricardo

Surveillance Data and Noise Control Development in Mining
pp. 645-652(8)
Authors: Azman, Amanda S.; Sun, Kan

Application of Transfer Path Analysis Techniques to Determine Noise Source Contribution in Mining Equipment
pp. 653-660(8)
Authors: Camargo, Hugo E.; Peterson, Jeffrey S.; Kim, Brian Y.

A Methodology for the Optimal Positioning of Damping Sheets On Panels
pp. 661-669(9)
Authors: Thi, Gai Vo; Jacqmot, Jonathan; Van den Nieuwenhof, Benoit; Raskin, Maxime

Studies on Influence of Geometrical Parameters of an Acoustic Black Hole
pp. 670-677(8)
Authors: Zhao, Chenhui; Prasad, M.G.

Adaptive Volume Control for Sound Masking Systems: How It Works and Analysis of Performance
pp. 678-686(9)
Authors: L'Espérance, Andre; Boudreau, Alex; Gariépy, François; Boudreault, Louis-Alexis; Mackenzie, Roderick

Robust NVH Development of Steering Systems Using In-Situ Blocked Forces from Measurements with Low-Noise Driver Simulators
pp. 687-694(8)
Authors: Sturm, Michael; Marchand, Craig; Priebe, Michael; Sherman, Scott; Yankonis, Michael; Moorhouse, Andy; Hirscher, Jonathan; Parikh, Shasvat

Abatement of Rail Noise - Especially for Infrastructure -
pp. 695-701(7)
Authors: Appel, Percy; Weinandy, René

Gasoline Turbo-Boosted Direct Injection Engine Calibration Impact on Tail Pipe Acoustics Utilizing Design for Six Sigma
pp. 702-709(8)
Authors: Wang, Yuntian; Sobecki, Brandon; Hua, Xin

Power Generator Set - Acoustic Enclosure Modeling for Low Frequency Noise Prediction
pp. 710-714(5)
Authors: More, Shashikant; Gandla, Puneeth; Fapal, Anand

Sound Intensity Mapping to Synthesize and Rapidly Optimize the Reduction of Machinery Noise Emission
pp. 715-722(8)
Authors: Jorro, Steven M. K.; Hawn, Michael; Perin, Dino

Hammering Sound Characteristics of Tunnel by Rotary Hammer Inspection Equipment
pp. 723-729(7)
Authors: Yonemoto, Yuichi; Nakajima, Yasutaka; Taniguchi, Tetsuya; Kuwano, Daisuke

Estimating the Audibility of Mining Haul Trucks in a Remote National Preserve
pp. 730-735(6)
Author: Connolly, Sean

Optimized Acoustics Research Program Update: Achieving High Sound Isolation When a Suspended Acoustical Ceiling Runs Continuously Over Partial-Height Demising Walls
pp. 736-748(13)
Authors: Madaras, Gary S.; Heuer, Andrew E.

The Influence of Sharpness on People's Responses to Wind Noise Inside Automobiles
pp. 749-757(9)
Authors: Carr, Daniel Joseph; Davies, Patricia R.

Reducing Leaf Blower Noise: A Product Noise Control Success Story
pp. 758-765(8)
Author: Nelson, David A.

Evaluating Damping Treatments Using Radiated Sound Power Normalized by Input Mechanical Power
pp. 766-771(6)
Author: Zehme, John

Study of Dynamic Characteristics of a Test Apparatus Developed to Build Squeak Propensity Database
pp. 772-778(7)
Authors: Lee, Gil Jun; Kim, Jay

Expanding the Use of Controlled Minimum Background Sound Throughout Healthcare Facilities
pp. 779-785(7)
Author: Doedens, Ric

A Two-Step Approach to Build a FEM Model of a Built-Up Structure with Special Attention to Description of Boundary Conditions and System Damping
pp. 786-797(12)
Authors: Jayakumar, Vignesh; Kim, Jay

The Effect of Additives on Vibration Damping in Polyvinyl Chloride and Acrylic Formulations
pp. 798-805(8)
Authors: Funderburg, Michael; Wubbe, Simone

Novel Approach to Visualization of Soundplan Data for Analysis of Mining Noise
pp. 806-812(7)
Author: Raley, Michael

Scale Modeling of Acoustic Scattering
pp. 813-820(8)
Authors: Cheng, Gong; Herrin, David W.; Zhang, Nan

Examination of the Trade-Offs Between Accuracy and Feasibility in Aspects of Ground-Borne Vibration Propagation Testing
pp. 821-828(8)
Authors: Singleton, Herbert L.; Montoya, Juan C.

Performance Evaluation of a Syntactic-Foam Water Hammer Arrestor
pp. 829-836(8)
Authors: Cunefare, Kenneth A.; Toothman, Maxwell F.; Chai, Jarrett; Vora, Fahad T.

Analytical Modeling of a Particle Impact Damper on a Cantilever Beam
pp. 837-842(6)
Authors: Kocak, Kamil; Cunefare, Kenneth A.

Investigation of Wind-Induced Noise in a High-Rise Condominium, A Case Study
pp. 843-852(10)
Author: Allen, Peter B.

A Review of Prior Research on Assessing Insertion Loss and Breakout Transmission Loss of Ductwork
pp. 853-863(11)
Authors: Ruan, Kangping; Herrin, David W.

Noise Estimation for Future Large-Scale Small UAS Operations
pp. 864-871(8)
Authors: Bulusu, Vishwanath; Polishchuk, Valentin; Sedov, Leonid

Investigation of the Correlation Between Transformer Sound Levels, Geomagnetically-Induced Currents, and Solar Flares
pp. 872-879(8)
Authors: Howell, Chris; Brewe, Ian R.

Construction of a Spherical Sound Source From CNT Thin-Film
pp. 880-887(8)
Authors: Thiery, Micaela M.; Vaglica, Stephania; Senczyszyn, Steven; Barnard, Andrew R.

Cost-Effective Unmanned Aerial System Applications for Outdoor Noise Monitoring
pp. 888-896(9)
Author: Storm, Mark C.

Calculating Frequency Dependent Sound Pressure Levels in Data Centers During Fire Suppression Discharges
pp. 897-904(8)
Author: Vaglica, Stephania M.

An Attempt to Use the Lombard Effect to Prescribe Effective Acoustical Treatments in a University Cafeteria Space
pp. 905-911(7)
Authors: Corrado, Casey; Scinto, Jennifer

An Assessment of Background Noise Variability in a Controlled Laboratory Environment
pp. 912-919(8)
Author: Bard, Seth E.

Noise From a Mine Shaft Ventilation Fan
pp. 920-928(9)
Authors: Ruhala, Richard J.; Ruhala, Laura A.

An Annular Helmholtz Resonator and Its Tuning Performance on Two-Box Single Exhaust System
pp. 929-936(8)
Authors: Hua, Xin; Dholaria, Jagdish

Adding Muffler Elements to Partial Enclosures to Improve Performance
pp. 937-944(8)
Authors: He, Shujian; Herrin, David W.

An Integral-Based Impedance-To-Scattering Matrix Method for Silencer Analysis
pp. 945-952(8)
Authors: Wang, Peng; Wu, Tim

Assessment of the Influence of Seasonal Variation on Road Traffic Noise.
pp. 953-960(8)
Authors: King, Eoin A.; Caltagirone, Elizabeth; Owens, Johanna; Celmer, Robert; LoVerde, John; Dong, Wayland; Rawlings, Samantha

Comparison of Ten Circular Saw Blades Using the Feed Rate Adjusted Sound Power Level When Cutting MDF Board
pp. 961-985(25)
Author: Zechmann, Edward L.

Urban Sound Planning - Needs and Achievements for Planning Urban Sound Environments in Practice
pp. 986-992(7)
Authors: Scheuren, Joachim; Altreuther, Beate; Alves, Sonia

Comparison of the Continuous and Transient Performance of Five Classical Filter Designs for Impulsive Noise Characterization
pp. 993-1004(12)
Author: Zechmann, Edward L.