INTER-NOISE and NOISE-CON Congress and Conference Proceedings

A system for verification of the acoustic signal properties of audible medical alarms to the requirements of IEC 60601-1-8
pp. 1-5(5)
Authors: Schmitt, Jeff G.; Schaffer, Michael

Structure-borne MRI noise mitigation in a medical office building
pp. 6-12(7)
Authors: Davenny, Benjamin; Unger, Gladys; Zapfe, Jeffrey

The relationship between patients and delirium as affected by hospital acoustics
pp. 13-22(10)
Authors: Harari, Robert M.; Prasad, M.G.

A report on updates to the 2014 FGI and sound & vibration guidelines for healthcare facilities
pp. 23-30(8)
Authors: Van Wyk, Kenric; Horan, Daniel; Murphy, Kristen

On the need for door gasket systems in patient rooms
pp. 31-37(7)
Author: Tocci, Gregory C.

Meeting room sound quality improvement - Quantification of design results
pp. 38-45(8)
Author: Brooks, Bennett

Noise control considerations in ultra green building construction
pp. 46-49(4)
Author: Hesedahl, Jeanette

Overview of AHRI standards related to HVAC equipment sound
pp. 50-55(6)
Authors: Eichelberger, Curtis; Bauch, Paul

Science lab HVAC noise reduction in several phases
pp. 56-62(7)
Author: Seep, Ben

Computer modeling of STC: A summary of options and accuracy
pp. 63-72(10)
Author: Horan, Daniel M.

Analysis of floors for long duration rhythmic exercise activities: Reuse of existing floors and purpose built floors
pp. 73-80(8)
Author: Sherren, Richard

A multi-criteria method to assess the acoustic quality in museums
pp. 81-88(8)
Authors: Carvalho, Antonio P.O.; Garcia, Luisa M.M.; Goncalves, Helder J.S.

Sound isolation and environmental noise assessment of an historic hotel building
pp. 89-96(8)
Author: Babich, Jeffrey E.

Examining laboratory impact insulation data in both short-circuited resilient channel and retrofit ceilings in solid joist floor-ceiling construction.
pp. 97-102(6)
Author: Byrick, Wilson

Noise prediction of traffic on freeways and arterials from measured sound data
pp. 103-107(5)
Authors: LoVerde, John; Dong, Wayland; Rawlings, Samartha

Case study: Vibration isolation of high speed cameras from neighbouring gym vibrations
pp. 108-115(8)
Authors: Rimrott, Bob; Preager, Tim; Sylvestre-Williams, Nicholas

Comparing low frequency impact noise using a tapping machine and heavy/hard impact source on various fitness floor assemblies
pp. 116-121(6)
Author: Gartenburg, Paul

Blocking sounds: Partition construction, Case studies
pp. 122-129(8)
Authors: Barnobi, Christopher L.; Young, Adam S.; Bruce, Robert D.; Bommer, Arno S.; Olvera, Edgar; Harwell, Issac

Numerical measurement of sound transmission loss of panel structures
pp. 130-137(8)
Authors: Wang, Gang; Li, Wen L.; Du, Jingtao; Li, Wanyou

Revised updates to Beranek's room volume to room constant figure
pp. 138-146(9)
Author: Fullerton, Jeffrey L.

Comparison of vibration levels and characteristics of cut, floated, and non-isolated floor slabs exposed to ground-borne vibration
pp. 147-152(6)
Author: Sevener, Nathan Bryce

AHRI 1280P - A new standard for rating the sound power of water-cooled chillers
pp. 153-158(6)
Authors: Marks, Patrick; Unger, Dale

Variation over time for reference sound source sound power levels
pp. 159-164(6)
Author: Lind, Stephen

Understanding compressor sound and noise control methods
pp. 165-172(8)
Author: Wang, Jack

A strategy for controlling fan-motor vibration across broad HVAC unit configuration matrices
pp. 173-179(7)
Authors: Rockwood, Bill; Garvin, Tim

An investigation of HVAC directivity: Theory versus reality
pp. 180-185(6)
Authors: Wiens, Tim; Masschaele, Michael; Reusing, Gordon; Grozev, Slavi

HVAC noise prediction and treatment for ships
pp. 186-194(9)
Author: Bahtiarian, Michael

A case study of the new Joe DiMaggio Children's Hospital central energy plant, Fort Lauderdale, Florida
pp. 195-196(2)
Author: Dugger, Edward

Sound power due to water splashing in a cooling tower
pp. 197-202(6)
Author: Marshall, Steve

The application of experimental statistical energy analysis to an air handler
pp. 203-210(8)
Authors: Ramalingam, Srinivasan; Herrin, D.W.

Noise and vibration control for HVAC units containing pure tones
pp. 211-218(8)
Author: Lilly, Jerry G.

Response to noise generated by wind farms in people living in nearby areas
pp. 219-226(8)
Authors: Pawleczyk-Luszczynska, Malgorzata; Zaborowski, Kamil; Dudarewicz, Adam; Zamojska-Daniszewska, Malgorzata; Waszkowska, Malgorzata

Wind energy sound monitoring under high shear conditions
pp. 227-233(7)
Author: O'Neal, Robert D.

The Massachusetts research study on wind turbine acoustics - Methods and goals
pp. 234-239(6)
Authors: Kaliski, Kenneth; Duncan, Eddie; McPhee, Peter; West, Carol Rowan; O'Neal, Robert; Zimmerman, John; Snyder, Jeff

Discussion of New York City's new noise code
pp. 240-247(8)
Authors: Shamoon, Charles; Park, Tae Hong

Environmental benefits assessment due to the directive 2000/14/EC: Outcomes of a preliminary study
pp. 248-254(7)
Authors: Curcuruto, Salvatore; Atzori, Delio; Marsico, Giuseppe; Mazzocchi, Enrico

Issues and recommendations for construction vibration monitoring
pp. 255-262(8)
Authors: Burge, Paul; Buehler, David

Aviation noise transmission indoors - Overview of FAA research and assessment of future research needs
pp. 263-270(8)
Author: He, Hua

New American National Standard: Methods for the measurement of noise emissions from high performance military jet aircraft
pp. 271-277(7)
Authors: Wall, Alan T.; McKinley, Richard L.

Radiation efficiency measurement techniques of planar structures
pp. 278-283(6)
Authors: Cherif, Raef; Atalla, Noureddine

Investigating the sound field characteristics in a reverberant room using 2D cross-spectral density measurements
pp. 284-291(8)
Authors: Robin, Olivier; Osman, Haisam; Atalla, Noureddine

Evaluation of turbulent boundary layer noise measurements on an aircraft fuselage
pp. 292-298(7)
Authors: Wang, Tongan; Maxon, John

Acoustic test results of melamine foam with application to payload fairing acoustic attenuation systems
pp. 299-306(8)
Authors: Hughes, William O.; McNelis, Anne M.

Results of a test using simulated rotorcraft flyovers designed to compare ratings of rotorcraft noise
pp. 307-314(8)
Authors: McMullen, Andrew; Davies, Patricia

An evaluation of the additional acoustic power needed to overcome the effects of a test article’s absorption during reverberant chamber acoustic testing of spaceflight hardware
pp. 315-328(14)
Authors: Hozman, Aron D.; Hughes, William O.

Virtual powertrain swap in vehicle development utilizing a time-domain source-path-receiver model
pp. 324-331(8)
Authors: Freeman, Todd; Jacobsen, Pete; Rinaldi, Giovanni

Visualization of automotive power seat slide motor noise
pp. 332-339(8)
Authors: Cho, Yong Thung; Bolton, J. Stuart

Auralization of ambient noise in vehicles
pp. 340-347(8)
Authors: Grams, Philipp; Arsic, Dejan; Huff Jr, John E.

Cascading vehicle cab-interior sound targets to insulation requirements
pp. 348-355(8)
Author: Wentzel, Richard E.

A system approach for vibro-acoustic analysis of right-angle gearbox
pp. 356-365(10)
Authors: Wang, Yawen; Yang, Junyi; Guo, Dong; Sun, Guohua; Lim, Teik C.

Noise reduction on an electrical drive module
pp. 366-373(8)
Authors: Ley, Jason; Sun, Zhaohui

A holistic approach to the assessment of powertrain induced acoustic phenomena in battery electric vehicles
pp. 374-381(8)
Authors: Albers, Albert; Fischer, Jan; Behrendt, Matthias

Whistle noise prediction and risk assessment in exhaust silencers
pp. 382-392(11)
Authors: Christian, Jonathan; Scott, Jonathan; Quadri, Syed

Prediction of Rasp (non-linear wave propogation) in automotive exhaust systems
pp. 393-400(8)
Author: Egan, Jim

Effect of unequal length of hot end legs on sound quality of vehicle interior noise of V6 engine
pp. 401-408(8)
Authors: Dholaria, Jaqdish; Bogard, Trent; Rohm, Tom

Improved tuning of the extended concentric tube resonator for wide-band transmission loss
pp. 409-416(8)
Authors: Ramya, E.; Munjal, M.L.

Sound engineering - Methods and products in the exhaust system
pp. 417-423(7)
Authors: Boennen, Dennis; Kim, Hoi-Jeon; Zintel, Gerhard

A comparative study of the acoustic behavior of porous duct using simulation and testing
pp. 424-429(6)
Authors: Zhang, Weiguo; Lynch, Mac; Van Gils, Anneleen; Balachandran, Karthik

Muffler system design simulation using acoustic noise synthesis
pp. 430-437(8)
Authors: Prasad, M.G.; Rajavel, B.

Notes on the muffler design process
pp. 438-445(8)
Authors: Herrin, D.W.; Elnady, T.; Zhang, Y.; Wang, P.; Wu, T.W.

Bar silencer analysis using reciprocal work identity and BEM impedance matrix
pp. 446-452(7)
Authors: Zhou, L.; Ruan, K.; Wu, T.W.

Impedance-to-scattering matrix method for silencer analysis
pp. 453-460(8)
Authors: Wang, P.; Wu, T.W.

Challenges in noise testing of large industrial mufflers
pp. 461-468(8)
Authors: Green, Edward; Loy, Matthew

Development of a compact intake silencer for a lift truck application
pp. 469-477(9)
Author: Hamilton, David A.

Modeling fan noise with time-domain CFD within the product design cycle
pp. 478-485(8)
Authors: Washburn, Karl; Wu, Jingshu; Horrigan, Kevin; Perot, Franck; Sass, Steve

Effect of piston secondary motion on engine noise
pp. 486-492(7)
Authors: Kale, Rahul; Liu, Jiawei

Power generator set - Noise level optimization for cost effective designs
pp. 493-497(5)
Authors: More, Shashikant; Meyers, Martin

Total noise analysis for containerized power generator
pp. 498-505(8)
Authors: Ndione, Jacques; Weaver, Patrick; Powell, Robert; Calvillo, Francisco; Horrigan, Kevin

Reduction of gas turbine low frequency sound emission through improved exhaust collector design
pp. 506-511(6)
Author: Johnson Sr, Robert S.

Centrifugal gas compressor sound emissions using noise from vibrations
pp. 512-517(6)
Author: Fuzak, Corey

Noise control in a wood panel production plant - A case study
pp. 518-523(6)
Authors: Belderrain, Maria Luiza; Montemurro, Wanderley; Vaidotas, Rafael

Correlation study on dynamic characteristics of the vane segment from a longwall cutting drum
pp. 524-530(7)
Authors: Li, Mingfeng; Yang, Junyi; Camargo, Hugo E.

A comparison of corded- and badge-type noise dosimeter performance for the mining industry
pp. 531-538(8)
Author: Homer, John P.