INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Laboratory evaluations of a redesigned collapsible drill steel enclosure to reduce noise from roof bolting machines
pp. 539-547(9)
Authors: Azman, Amanda; Camargo, Hugo; Alcorn, Lynn

Theoretical and practical aspects of noise control at a coal handling plant
pp. 548-555(8)
Authors: Szary, Marek L.; Hirschi, Joseph C.; Mohanty, Manoj K.

Noise control concepts for a longwall cutting drum
pp. 556-564(9)
Authors: Yang, Junyi; Camargo, Hugo E.; Yantek, David S.

A noise control for air carbon arc cutting and gouging
pp. 565-576(12)
Authors: Lowe, M. Jenae; Mechling, Jessie J.

Underground evaluation of noise controls for LHD’s and haul trucks used in underground metal/non-metal mines
pp. 577-585(9)
Authors: Peterson, Jeffrey Shawn; Lowe, M. Jenae; Yantek, David

High frequency sound field simulation for multiple sources using local basis representations
pp. 586-594(9)
Authors: Liu, Yangfan; Bolton, J. Stuart

Effect of signal duration on the sound field in a water-filled waveguide
pp. 595-600(6)
Authors: Kilgallin, Sean D.; Hastings, Mardi C.

Developing new products for low noise emission - Application of computational fluid dynamics
pp. 601-608(8)
Author: Lucas, Michael J.

Investigation on traffic noise predictions of CadnaA and SoundPLAN using TNM noise prediction model
pp. 609-616(8)
Authors: Sun, Sheying; Morozumi, Neil; Patching, Richard

Assessing all noise sources in one model: Implementation of INM and ECAC 3rd edition in Noise mapping software
pp. 617-624(8)
Authors: Notario, Antonio; Probst, Fabian

Towards strategic noise mapping of US cities: A noise map for the city of Hartford, CT
pp. 625-632(8)
Authors: King, Eoin A.; Metcalfe, Glen; Quitzau, Erik; Celmer, Robert D.

Development of a hearing loss estimation software
pp. 633-640(8)
Authors: Li, Mingfeng; Azman, Amanda S.; Thompson, James K.

Development of a set of structural acoustic teaching demonstrations using a simply-supported plate
pp. 641-647(7)
Authors: Barnard, Andrew R.; Hambric, Stephen A.

Building on the foundations of acoustics through demonstrations
pp. 648-655(8)
Author: Gabrielson, Thomas B.

Atmospheric effects on noise propagation from an en-route aircraft
pp. 656-663(8)
Authors: Tong, Bao; Li, Kai Ming

Accuracy of wave based calculation methods compared to ISO 9313-2
pp. 664-678(15)
Authors: Economou, Panos; Brittain, Frank; Charalampous, Panagiotis

Effect of alternative combinations of source type, sizes, and complexity on accuracy of modeling a power plant
pp. 679-688(10)
Authors: Hale, Marlund E.; Brittain, Frank

Atmospheric absorption effects on the propagation of aircraft noise
pp. 689-696(8)
Authors: Sparrow, Victor W.; Romond, Rachel A.

Noise reduction from shop vacuums by the application of Helmholtz resonator.
pp. 697-701(5)
Authors: Le, Hoang; Darvennes, Corinne

An enclosed wrapping for reducing blender noise
pp. 702-707(6)
Authors: Prasad, M.G.; George, Samantha; Saley, Christian; Winstanley, Kevin

Why buy quiet?
pp. 708-712(5)
Authors: Hayden, Charles; McCleery, Trudi

Improved model for coupled structural-acoustic modes of tires
pp. 713-728(16)
Authors: Cao, Rui; Sakamoto, Nicholas; Bolton, J. Stuart

New Jersey micro-surface pavement noise evaluation
pp. 729-729(1)
Authors: Hencken, John; Tulanowski, Michael; Hass III, Edwin; Bennert, Thomas

Relative calibration and phase matching requirements for tire-pavement noise sound intensity measurement systems
pp. 730-742(13)
Author: Donavan, Paul R.

The past ten years of tire-pavement noise research
pp. 743-753(11)
Author: Dare, Tyler

Port of Miami tunnel fan noise acoustical assessment
pp. 754-759(6)
Author: Kinney Jr, Bernard

Development and implementation of an underwater construction noise program
pp. 760-766(7)
Authors: Thalheimer, Erich; Poling, Jacob; Greene, Rob

Selecting floating slab track designs for mitigating groundborne vibration from transit systems
pp. 767-774(8)
Authors: Rajaram, Shankar; Saurenman, Hugh

Acoustic fingerprinting of freight and passenger trains
pp. 775-779(5)
Authors: Redman, Gillian; Hellewell, Kyle; Van Haeren, Brandon

Technical and legal measurements to abate railway noise in Germany
pp. 780-783(4)
Author: Weinandy, Rene

Examining measured sound power variances in telecommunications equipment
pp. 784-788(5)
Author: Lam, Eddie

Prediction and identification of the aerodynamic noise source on small axial fan
pp. 789-794(6)
Authors: Minorikawa, Gaku; Jeon, Wanho; Lim, Taegyun; Hong, Hyongi

Development of engineering grade HAC qualification method for sound power level determination of IT equipment - Progress and key issues
pp. 795-802(8)
Authors: Shimoda, Kohei; Kimizuka, Ikuo; Takanashi, Akio

An accurate and affordable technique for determining the free-field response of microphones by using acoustical excitation instead of electrostatic actuator
pp. 803-809(7)
Author: Buzduga, Valentin

A proposed correction for incident sound intensity distribution for diffuse field panel excitation and transmission loss simulations
pp. 810-817(8)
Authors: Lynch, Kristopher; Bauch, Paul; Hambric, Stephen; Barnard, Andrew

Evaluation of a Jecklin disk for industrial product sound quality work
pp. 818-825(8)
Authors: Copley, David C.; Sondkar, Pravin

NVLAP acoustical proficiency testing: Historical summary and the future
pp. 826-834(9)
Authors: Mouratidis, Emanuel; Harper, Karl K.

Soundscape spectrogram with spreadsheet software
pp. 835-839(5)
Authors: Storm, Mark; Kaiser, Christopher

Designing a short term noise monitoring service
pp. 840-847(8)
Authors: Manvell, Douglas; Bracci, Greg

Measuring sound absorption coefficient under a synthesized diffuse acoustic field
pp. 848-855(8)
Authors: Robin, Olivier; Berry, Alain; Doutres, Olivier; Atalla, Noureddine

Development of a near-field acoustic holography double layer array with reduced sensor count
pp. 856-863(8)
Authors: Kim, Jeong-Woo; Blanc, Arthur

Computerized detection and rating of squeak and rattle events in automobiles
pp. 864-872(9)
Authors: Lee, Gil Jun; Chandrika, Unnikrishnan Kuttan; Kim, Yongjin; Kim, Jay

Acoustic determination of microphone positions in an impedance tube
pp. 873-879(7)
Authors: Fackler, Cameron; Xiang, Ning

A time and frequency tool for noise and vibration troubleshooting
pp. 880-887(8)
Authors: Rinaldi, Giovanni; Moon, Chris; Engels, Bret

Alternative method of measuring system loss factor
pp. 888-895(8)
Author: Stanley, Dan R.

Double-leaf sound transmission loss of micro-perforated and porous materials
pp. 896-903(8)
Authors: Kim, Jeong-Woo; Mendoza, Jeffrey M.

Effect of thermal losses and fluid-structure interaction on the transfer impedance of microperforated films
pp. 904-915(12)
Authors: Herdtle, Thomas; Bolton, J. Stuart

Design of multi-chamber silencers with microperforated elements
pp. 916-927(12)
Authors: Lee, Seungkyu; Bolton, J. Stuart; Martinson, Paul A.

A tutorial for designing microperforated panel absorbers
pp. 928-935(8)
Authors: Herrin, D.W.; Hua, X.; Liu, J.

Optimization of multi-layer microperforated systems for absorption and transmission loss
pp. 936-943(8)
Authors: Kim, Nicholas N.; Bolton, J. Stuart

A design parameter for acoustic black holes
pp. 944-951(8)
Authors: Feurtado, Philip; Conlon, Stephen

Multifunctional structures for concurrent passive vibration control and energy harvesting based on embedded acoustic black holes
pp. 952-962(11)
Authors: Zhao, Liuxian; Semperlotti, Fabio

ASTM E90 transmission loss test aperture upgrade
pp. 963-972(10)
Author: Hawn, Michael

Measurement of the transfer impedance of covers and adhesives with application to multi-layer design
pp. 973-979(7)
Authors: Li, W.L.; Haylett, James; Herrin, D.W.

A survey of methods for determining the bulk properties of sound absorbing materials
pp. 980-987(8)
Authors: Li, W.L.; Hua, X.; Herrin, D.W.

Constrained layer damping for heavy structures with thin, soft viscoelastic materials
pp. 988-995(8)
Authors: Neville, Richard; Lee, Nicholas

The influence of test fixture damping on the measurement of sound transmission loss
pp. 996-1004(9)
Authors: Moritz, Charles; Shaw, Jennifer; Carrera, Armando

Transmission loss and absorption of corrugated core sandwich panels with embedded resonators
pp. 1005-1012(8)
Authors: Allen, Albert R.; Zalewski, Bart F.; Rosenthal, Bruce N.; Schiller, Noah H.

A feedback multi-tone algorithm for the control of helicopter gearbox noise in an active headrest
pp. 1013-1020(8)
Authors: Macchi, L.; Caillet, J.; Marrot, F.; Simon, F.

Stability bound of FXLMS algorithm for repetitive impact noise with different durations
pp. 1021-1028(8)
Authors: Sun, Guohua; Feng, Tao; Li, Mingfeng; Yang, Junyi; Lim, Teik C.

Fast active noise equalizer based on inverse model LMS algorithm
pp. 1029-1036(8)
Authors: Feng, Tao; Sun, Guohua; Li, Mingfeng; Yang, Junyi; Lim, Teik C.

Active control of sound transmission through an aperture in a thin wall
pp. 1037-1044(8)
Authors: Magnusson, Ingrid; Pamies, Teresa; Romeu, Jordi

Study on active control of the radiated sound power from the cantilever plate
pp. 1045-1052(8)
Authors: Li, Mingfeng; Yang, Junyi; Camargo, Hugo E.

Simulataing exhaust shell radiated noise using finite element techniques
pp. 1053-1060(8)
Authors: Kappagantu, Ramana; Christian, Jonathan; George, John

Evaluation of noise in sensitive living quarters aboard floating offshore oil & gas facilities using the SEA method
pp. 1061-1067(7)
Authors: Fowler, Kevin; Gardner, Bryce; Burrill, Michael

Filling in the "Modulation Gap"
pp. 1068-1074(7)
Author: Nelson, David

Lessons from a large, international sound quality study
pp. 1075-1081(7)
Author: Nelson, David

Aircraft dose-response research and relationships for National Park backcountry areas
pp. 1082-1088(7)
Authors: Rapoza, Amanda; Sudderth, Erika; Hastings, Aaron

Sound quality metrics for transport refrigeration equipment
pp. 1089-1095(7)
Author: Liu, Jin

The effects of office noise on cognitive performance
pp. 1096-1103(8)
Author: Jahncke, Helena

A temporally corrected sound pressure level as a new noise metric proposed to develop an improved noise guideline
pp. 1104-1111(8)
Author: Kim, Jay

On-land vibration monitoring during bridge construction and demolition
pp. 1112-1119(8)
Author: Romero, Patrick

Predicting noise from construction of liquefied natural gas import/export facilities
pp. 1120-1128(9)
Authors: Noel, Scott; Pellerin, Tricia