INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Sound radiation properties of complex modes of vibration
pp. 1-8(8)
Authors: Unruh, Oliver; Sinapius, Michael

A preliminary test conducted to understand perceptual characteristics of rotorcraft noise
pp. 9-15(7)
Authors: McMullen, Andrew; Davies, Patricia; Okcu, Selen

A simpler and effective method to perform building vibration analyses consistent with the FTA's "detailed" method
pp. 16-24(9)
Authors: Thalheimer, Erich; Herzog, Tom; Poling, Jacob

Noise transmission loss of sandwich composite panels with passive layered control treatments
pp. 25-33(9)
Authors: Ghinet, Sebastian; Osman, Haisam; Grewal, Anant

Improving predictions of gas turbine exhaust silencer performance
pp. 34-39(6)
Authors: Hill, James; Malecki, Colin; Williams, Paul; Kirby, Ray

Revision of ISO 9296 - International rules for declaration of IT equipment noise emissions embark upon new era
pp. 40-47(8)
Author: Kimizuka, Ikuo

Evaluation of a heavy equipment cab interior sound field and implications on modeling
pp. 48-55(8)
Author: Copley, David C.

A simplified approach to simulating sonic booms indoors
pp. 56-64(9)
Authors: Giacomoni, Clothilde; Davies, Patricia

Acoustic comparison of a hybrid-electric and an internal combustion Snowmobile
pp. 65-72(8)
Authors: Giesbrecht, Jared; Kuyek, David; Quellette, Simon

Experimental study on the convergence behavior of modified FXLMS algorithm for active impact noise control
pp. 73-80(8)
Authors: Sun, Guohua; Li, Mingfeng; Lim, Teik C.

Transient, planar, nonlinear acoustical holography for reconstructing acoustic pressure and particle velocity fields
pp. 81-89(9)
Authors: Niu, Yaying; Kim, Yong-Joe

Recovery of the free sound field using particle velocity measurements
pp. 90-96(7)
Authors: Bi, Chuan-Xing; Hu, Ding-Yu; Zhang, Yong-Bin

Traditional and angle-dependent evaluation of a reverberant-anechoic transmission loss suite
pp. 97-104(8)
Authors: Bauch, Paul; Barnard, Andrew R.

Characterization of the "Ranchlands' Hum"'; A Calgary community noise nuisance
pp. 105-112(8)
Authors: Smith, Michael; Gupta, Grimika; Marasco, Emily; Epstein, Marcia; Patching, Richard; Scott, Ken; Nayak, Spoorthi

Acoustical performance of two commercial windscreens
pp. 113-118(6)
Author: Lilly, Jerry G.

Technical issues of the qualification method of the inverse square law characteristics for sound power determination of IT equipment
pp. 119-125(7)
Authors: Kimzuka, Ikuo; Suzuki, Masaki; Takanashi, Akio; Tanaka, Kouji; Shimoda, Kohei

Incorporating real atmospheres into aviation noise models using meteorological data from the AERMOD atmospheric dispersion model
pp. 126-135(10)
Authors: Romond, Rachel; Sparrow, Victor W.

Measurement and modeling of damping for time-domain structural acoustics simulations
pp. 136-143(8)
Authors: Cotte, Benjamin; Parret-Freaud, Augustin; Chaigne, Antoine

An improved screening method for addressing flow excited branch resonance in process piping systems
pp. 144-151(8)
Authors: Lamis, Farhana; Arjunan, Raj; Ghosh, Arindam

Acoustics of modern and old museums
pp. 152-159(8)
Authors: Carvalho, Antonio P.O.; Goncalves, Helder J.S.; Garcia, Luisa M.M.

Modeling of ground reflection effects in aircraft flyover noise synthesis
pp. 160-167(8)
Authors: Arntzen, Michael; Sijl, Jeroen; Simons, Dick G.

Acoustic ray tracing parallelization
pp. 168-175(8)
Authors: Arntzen, Michael; Shen, Jie; Varbanescu, Ana Lucia; Sips, Henk; Simons, Dick G.

Passive control of vibration and sound transmission for vehicle structures via embedded Acoustic Black Holes
pp. 176-184(9)
Authors: Conlon, S.C.; Semperlotti, F.; Fahnline, J.B.

Comparison of finite element models for residential building walls and low frequency sound transmission
pp. 185-191(7)
Authors: Kim, Beom Soo; Sparrow, Victor W.

Finite element analysis of vibro-acoustic response of sandwich plates with corrugated cores subject to airborne excitation
pp. 192-199(8)
Authors: Wang, Yibo; Zheng, Hui; Wei, Zhiping

Development of elastomeric drill chuck isolators to reduce roof bolting machine drilling noise
pp. 200-207(8)
Authors: Johnson, David H.; Michael, Robert J; Callaghan, Shane J.; Fontana, Joshua J.

An indicator for rating environmental quality of urban parks
pp. 208-215(8)
Authors: Jabben, Jan; Verheijen, Edwin; Weber, Miriam

Multi-function, multi-point measurement system including data recorder and frequency analyser based on a dedicated computer and a multi-channel wireless sensor
pp. 216-221(6)
Authors: Nakajima, Yasutaka; Shinohara, Kenji; Ozaki, Tetsuya; Iwahashi, Kiyokatsu; Kurosawa, Yu; Yonemoto, Yuichi; Ueta, Toshihiro; Sato, Naru; Sakaue, Daisuke; Ohya, Masaharu

Large-scale calculation of possible locations for specific wind turbines under consideration of noise limits
pp. 222-229(8)
Authors: Probst, Fabian; Probst, Wolfgang; Huber, Bernd

Efficient evaluation of wind turbine noise
pp. 230-235(6)
Authors: Arsic, Dejan; Huff, John; Putner, Jakob

Vibration and noise monitoring activities in the construction industry: How communication technologies help offering efficient services
pp. 236-239(4)
Authors: Vaucher De La Croix, Daniel; Aflalo, Erik; Freneat, Christian

Auralization architectures for NASA's next generation aircraft noise prediction program
pp. 240-247(8)
Authors: Rizzi, Stephen A.; Lopes, Leonard V.; Burley, Casey L.; Aumann, Aric R.

Considerations for improving the efficiency of daily calibration work of multi-channel simultaneous measurement system for sound power level determination
pp. 248-254(7)
Authors: Shimoda, Kohei; Kimizuka, Ikuo; Tashiro, Shigeru; Tanaka, Kouji

A comparative analysis of the subjective assessment of standard and noise abatement aircraft procedures
pp. 255-270(16)
Authors: Sahai, Abhishek; Stumpf, Eike

Community based social marketing process to define measures for low noise behavior with outdoor machinery
pp. 271-278(8)
Authors: Wschiansky, Sebastian; Fischer, Maja; Moser, Stephanie

Design and evaluation of noise control measures for a pneumatic nail gun
pp. 279-286(8)
Authors: Jayakumar, Vignesh; Hubbard, Andrew; Schneider, George; Louie, Stephen; Zechmann, Edward

Development of a test appartus to determine optimal fan configurations for haul trucks and LHD's
pp. 287-297(11)
Authors: Peterson, J. Shawn; Lowe, M. Jenae; Yantek, David; Alcorn, Lynn

Multi-source aeroacoustic noise prediction method
pp. 298-306(9)
Authors: Christian, Jonathan; Scott, Jonathan

Simulator study of indoor annoyance caused by shaped sonic boom stimuli with and without rattle augmentation
pp. 307-313(7)
Authors: Rathsam, Jonathan; Loubeau, Alexandra; Klos, Jacob

Underwater noise monitoring to predict marine life impacts during ocean floor rock blasting
pp. 314-318(5)
Authors: Guldberg, Peter; Callahan, Ryan

Verification of aircraft acoustic source data for the Aviation Environmental Design Tool
pp. 319-326(8)
Authors: Boeker, Eric; Rapoza, Amanda

Sound radiation modeling and correlation of a longwall cutting drum
pp. 327-336(10)
Authors: Yang, Junyi; Camargo, Hugo; Yantek, David S.; Gardner, Bryce

Laboratory evaluation of noise and air flow for haul truck fans
pp. 337-349(13)
Authors: Yantek, David S.; Peterson, J. Shawn

Noise and vibration measurements for the DCTA Stadler DMU
pp. 350-357(8)
Authors: Towers, David A.; Johnson, Timothy M.; Edwards, Scott S.

Effects of relative humidity on environmental noise propagation
pp. 358-362(5)
Author: Redman, Gillian

Sound radiation of circularly oscillating spherical and cylindrical shells
pp. 363-370(8)
Authors: Wang, John; Xu, Hongan

Embedded mechanical bandpass filters using acoustic metamaterial waveguides coupled by cavity modes
pp. 371-379(9)
Authors: Zhu, Hongfei; Semperlotti, Fabio

Holographic visualization of sound radiation from computer hard drives
pp. 380-387(8)
Authors: Cho, Yong Thung; Bolton, J. Stuart

Design of a noise abatement system for optimized performance of industrial condensing cooling tower
pp. 388-395(8)
Authors: Choy, Mervyn; Golpaygan, Amir; Hugh, Chris; Lasowski, Joseph

Influence of car body noise attenuation ability on traffic sound perception and driving safety
pp. 396-403(8)
Authors: Ding, Ranran; Du, Yu

Selection of appropriate models and implementation of efficient computational strategies for modeling porous materials in a vibro-acoustic context
pp. 404-412(9)
Authors: Coyette, Jean-Pierre; Burd, David; Jacq, Erwan; Lielens, Gregory; Van den Nieuwenhof, Benoit; Van Antwerpen, Bernard

The procedures of mapped radiation mode analysis based near-field acoustic holography
pp. 413-420(8)
Authors: Wu, Haijun; Jiang, Weikang; Zheng, Haibin

Identifying noise monitoring locations for efficient compliance monitoring of construction sites and mines
pp. 421-429(9)
Author: Manvell, Douglas

Developing portable beam-forming device to detect squeak and rattle noise sources
pp. 430-436(7)
Authors: Kim, Youngkey K.; Hwang, Sungil; Kang, Jungoo; Ih, Kang-Duk; Kim, Yang-Hann

Guideline for monitoring noise from road infrastructures
pp. 437-444(8)
Authors: Curcuruto, Salvatore; Sacchetti, Francesca; Atzori, Dello; Betti, Rinaldo; Lanciotti, Enrico; Marsico, Giuseppe; Mazzocchi, Enrico; Curcio, Stefano; Bassanino, Maurizio; Mussin, Paola; Mussin, Mauro; Fogola, Jacopo

Accounting for the absolute threshold of hearing when analyzing low level sound
pp. 445-452(8)
Author: Rafaelof, Menachem

Acoustical challenges in long term care facilities
pp. 453-456(4)
Author: Razavi, Zohreh

Proceedings in regulating private noise sources in sensitive areas in Germany
pp. 457-464(8)
Author: Fabris, Christian

Practical aircraft simulation noise modeling
pp. 465-471(7)
Authors: Schultz, Troy D.; Czech, Joseph J.; Plotkin, Kenneth J.

The technical challenges of permitting power distribution and transmission systems subject to ambient noise degradation standards
pp. 472-478(7)
Authors: Pellerin, Patricia; Kalapinski, Erik; Noel, Scott; Ambrose, Tanya

Efficient analysis of modifications to complex structures for vibration reduction
pp. 479-487(9)
Authors: Wixom, Andrew S.; McDaniel, J. Gregory

A case study on development of a porous ducted air induction system Solution for a new Chrysler vehicle
pp. 488-495(8)
Authors: Khurana, Rakesh; Zhang, Weiguo

Experimental comparison of two active vibration control approaches: Velocity feedback and negative capacitance shunt damping
pp. 496-503(8)
Authors: Beck, Benjamin; Schiller, Noah

Using sound enhancement techniques to define and refine vehicle interior sound image/quality
pp. 504-509(6)
Authors: Khurana, Rakesh; Orzechowski, Jeffrey; Orange, Francois; Boussard, Patrick; Sulisz, Dennis

An empirical method to improve accuracy of in-situ sound power measurements of industrial equipment
pp. 510-519(10)
Authors: Johnson, Sr., Robert S.; Brittain, Frank H.

Physics based spatial acoustics in virtual scenes
pp. 520-523(4)
Authors: Mattson, Steven G.; Williams, Michael; Schneider, Ryan; Younk, Darrel

Playback of physics based spatial acoustics to create an immersive environment
pp. 524-531(8)
Authors: Mattson, Steven G.; Nelson, Kevin; Williams, Michael; Helminen, Ryan

Construction noise control program for the Clinton Combined Sewer Overflow Tunnel Project
pp. 532-539(8)
Authors: Thalheimer, Erich; Manchester, Scott; Poling, Jacob

Simulating the variance of Sound Transmission Class ratings from real measurement parameters
pp. 540-544(5)
Authors: Dick, Elliot; Berg, David

Simplify signal processing comparison with graphical system design
pp. 545-552(8)
Authors: Denton, Michael; Veggelberg, Kurt

Effect of flow on the noise attenuation of a muffler system
pp. 553-559(7)
Authors: Wang, Tongan; Lynch, Kristopher; Relf, Tyler; Maxon, John

Modified Herschel-Quincke tube for passive duct-borne HVAC noise control
pp. 560-563(4)
Author: Harrison, Seth M.

Qualification of air-conditioning unit base pan using Weibull analysis
pp. 564-569(6)
Authors: Mathuria, Parag H.; Wood, Richard J.

Effect of inlet guide vanes on centrifugal compressor acoustics
pp. 570-578(9)
Authors: Figurella, Neil; Dehner, Rick; Selamet, Ahmet; Tallio, Kevin; Miazgowicz, Keith; Wade, Robert; Karim, Ahsanul; Keller, Philip; Becker, Michael

Calibration of a long-wavelength acoustic flowmeter using a lumped impedance acoustic modle
pp. 579-587(9)
Authors: Gorny, Lee J.; Gillis, Keith A; Moldover, Michael R.

Evaluating anthropogenic noise effects on animal communication
pp. 588-593(6)
Authors: Dooling, Robert J.; Blumenrath, Sandra H.; Smith, Ed; Fristrup, Kurt

Rugged coulomb friction jackhammer moil point chisel noise damper
pp. 594-598(5)
Authors: Scarton, Henry A.; Wilt, Kyle R.; Wall, Christopher T.

Speech privacy and single steel stud wall construction
pp. 599-605(7)
Authors: LoVerde, John; Dong, Wayland

Acoustical design of the perception based engineering laboratory at Ray W. Herrick Laboratories Center for High Performance Buildings
pp. 606-614(9)
Author: Sevener, Nathan Bryce

Generation mechanisms of tire-pavement noise
pp. 615-622(8)
Authors: Dare, Tyler P.; Bernhard, Robert J.

Noise source identification on a stageloader system
pp. 623-631(9)
Authors: Camargo, Hugo E.; Yantek, David S.; Randolph, Robert; Schwartz, Kyle; Ravetta, Patricio; Burdisso, Ricardo

Analysis of launch abort system vent noise in Orion spacecraft
pp. 632-640(9)
Author: Dandaroy, Indranil

Ground-borne vibration control in a building-like structure using multi-positive position feedback
pp. 641-648(8)
Authors: Enriquez-Zarate, Josue; Silva-Navarro, Gerardo

Buy-Quiet Roadmap: A web-based application supporting procurement of low-noise equipment in the context of a hearing conservation program
pp. 649-652(4)
Authors: Cooper, Beth; Nelson, David A.; Gelfand, Amy

Modification of simulated far-field engine noise by changing near field measurement singular values
pp. 653-661(9)
Authors: Hayward, Michael D.; Sobecki, Brandon M.; Bolton, J. Stuart; Davies, Patricia

Sound field reconstruction at high frequencies by using a piece-wise interpolation method
pp. 662-671(10)
Authors: Liu, Yangfan; Bolton, J. Stuart

The air-arc interaction in air carbon arc gouging
pp. 672-678(7)
Authors: Lowe, M. Jenae; Mechling, Jessie J.

An ambient noise model for background noise corrections
pp. 679-687(9)
Authors: Oppenheimer, Charles; Bard, Seth

Comparison of laboratory measurements of noise from constant voltage and constant current air carbon arcing
pp. 688-694(7)
Authors: Lowe, M. Jenae; Schuster, Kevin C.

Notebook fan noise user study
pp. 695-701(7)
Authors: Baugh, Eric; Beltman, Marco; Doherty, Rina

Advancements toward a high-powered carbon nanotube thin-film loudspeaker
pp. 702-708(7)
Authors: Barnard, Andrew R.; Brungart, Timothy A.; McDevitt, Timothy E.; Jenkins, David M.; Kline, Brian L.

Numerical study of transmission loss through a slow gas layer adjacent to a plate
pp. 709-717(9)
Authors: Schiller, Noah H.; Beck, Benjamin S.; Slagle, Adam C.

Near-field structure-borne sound holography: Theory vs. practice
pp. 718-725(8)
Author: Greussing, Dietmar

Consultant and student collaboration on sound level measurements in a hospital
pp. 726-730(5)
Authors: Davenny, Benjamin; Celmer, Robert; Parlock, Rachel; Stahura, Tiffany; Kaytt, Thomas; Lindsay, Stephen

Extending noise- and power-optimized fan selection into the sound quality domain using iso-acoustic and iso-power methods
pp. 731-736(6)
Author: Nelson, David

Noise control for a natural gas compressor station with reciprocating and centrifugal compressors
pp. 737-741(5)
Author: Simmons, Timothy G.

Some practical aspects of noise control at a coal handling plant
pp. 742-749(8)
Authors: Szary, Marek L.; Mohanty, Manoj K.; Hirschi, Joseph C.; Weber, Peter L.

Laboratory measurements of the reduction of various impact noise sources by floor coverings
pp. 750-754(5)
Authors: Chung, Jinyun; Cho, Bonggyu

Assessment of construction noise annoyance by construction machinery
pp. 755-759(5)
Authors: Lee, Sungchan; Lee, Hyemi

Improving the quality of noise measurements
pp. 760-764(5)
Author: Thomsen, Carsten

Degradation in airborne sound isolation due to structural loading in wood frame buildings and meeting building code requirements
pp. 765-768(4)
Author: Larsen, Alicia J. Wagner

Experimental vibro-acoustic analysis for troubleshooting compactor cab booming noise
pp. 769-778(10)
Authors: Xu, Hongan; Wang, John; Dickinson, Owen; Kang, Hyunseok

Vehicle design for robust driveline NVH due to imbalance and runout: A Case study
pp. 779-787(9)
Authors: Shubailat, Omar; King, Roger; Qatu, Mohamad; Hammi, Youssef

Application of a broadband active vibration control system to a helicopter trim panel
pp. 788-795(8)
Authors: Cabell, Randolph H.; Schiller, Noah H.; Simon, Frank

Noise-induced sleep disruption among hospitalized patients: Brain-based approaches toward sleeping soundly on noisy nights
pp. 796-803(8)
Author: Ellenbogen, Jeffrey M.

Limitations of noise ordinances for addressing substation noise
pp. 804-809(6)
Author: Bell, Damien

Time-domain ASQ method for pass-by noise engineering
pp. 810-818(9)
Authors: Janssens, K.; Bianciardi, F.

Sound synthesis approach for noise annoyance assessment of rotorcraft operations
pp. 819-826(8)
Authors: Sabbatini, D.; Hartjes, S.; Visser, H.G.; Gennaretti, M.; Bernardini, G.; Janssens, K.

Acoustical holography imaging of full-scale jet noise fields
pp. 827-833(7)
Authors: Wall, Alan T.; Gee, Kent L.; Neilsen, Tracianne B.; James, Michael M.

Acoustical holography and proper orthogonal decomposition methods for the analysis of military jet noise
pp. 834-840(7)
Authors: Wall, Alan T.; Gee, Kent L.; Neilsen, Tracianne B.; James, Michael M.

Varying backing cavity depths to achieve broadband absorption using micro-perforated panels
pp. 841-848(8)
Authors: Hua, X.; Herrin, D. W.; Jackson, P.

Enhancing muffler or silencer performance by adding bypass ducts
pp. 849-856(8)
Authors: Zhang, Y.; Herrin, D. W.; Wu, T. W.

High transmission loss glass wall design
pp. 857-861(5)
Authors: Old, Isaac; Duncan, Eddie

Noise measurements and regulatory evaluations for three wastewater treatment plants
pp. 862-869(8)
Author: Szymanski, Jeff D.

Development of a tuned vibro-acoustic absorber for a clothes washer application
pp. 870-875(6)
Authors: Herreman, Kevin; Young, Crystal

Active control of sinusoidal disturbances using inverse model LMS algorithm
pp. 876-882(7)
Authors: Li, Mingfeng; Lim, Teik C.; Duan, Jie

Statistical energy analysis model of a dishwasher
pp. 883-890(8)
Author: Herreman, Kevin

Value of a sound rating for dishwashers
pp. 891-896(6)
Authors: Herreman, Kevin; Young, Crystal

System-wide OBSI study to evaluate success of diamond grinding to attain project noise reduction goal
pp. 897-904(8)
Authors: Cox, J. Eric; Menge, Christopher W.

Time-frequency beamforming for nondestructive evaluations of plate using ultrasonic Lamb wave
pp. 905-909(5)
Authors: Han, Je-Heon; Kim, Yong-Joe

Product Noise Rating (PNR) as applied to dishwashers: A test case
pp. 910-917(8)
Authors: Young, Crystal; Herreman, Kevin

Update to Beranek's room volume to room constant figure
pp. 918-926(9)
Author: Fullerton, Jeffrey L.

Understanding and preserving quiet areas
pp. 927-933(7)
Author: Miller, Nicholas P.

Using public input to develop scientifically sound noise pollution policy for Vermont's rural land uses and communities: Methodology and initial results
pp. 934-939(6)
Author: Duncan, Eddie

Vibroacoustic tailoring of a fuselage panel with multidisciplinary considerations
pp. 940-947(8)
Authors: Allen, Albert; Przekop, Adam

A spectro-geometric method for the vibration analysis of built-up structures
pp. 948-953(6)
Authors: Jiang, Shiliang; Li, Wen L.; Yang, Tiejun

Acoustic emission monitoring of changes in shape memory polymer under structural test
pp. 954-961(8)
Authors: Ayorinde, Emmanuel; Al-Zubi, Mohammad; Wu, Xin; Deng, Feizhong

The effect of indoor air quality requirements on down-duct noise: HVAC noise control in a post-fibrous duct liner world
pp. 962-969(8)
Author: Manley, David

Computational aeroacoustic modeling of open fan and comparison of predicted and experimental noise fields
pp. 970-977(8)
Authors: Kim, Sitae; Niu, Yaying; Kim, Yong-Joe

Acoustical studies on corrugated tubes
pp. 978-986(9)
Authors: Rajavel, B/; Prasad, M..G.

Identifying varying preferences in a paired comparison jury study using unsupervised clustering techniques
pp. 987-994(8)
Authors: Pietila, Glenn; Lim, Teik C.

Preserving and restoring authentic acoustic environments that will inspire the American public
pp. 995-1003(9)
Author: Fristrup, Kurt

Potential effects on soundscape from hydroelectric power
pp. 1004-1009(6)
Author: Storm, Mark

Compatibility of outdoor concerts in urban areas: Planning case study
pp. 1010-1019(10)
Author: Bliss, Mark

A dual-level integrated course in vibration and acoustics for noise control education
pp. 1020-1025(6)
Author: Prasad, M.G.

Use of advanced tools and techniques to resolve an atypical parallel noise barrier case
pp. 1026-1033(8)
Authors: Burge, Paul; Crawford, John; Wasko, Peter

INCE/USA student awards and activities - Past, present and future
pp. 1034-1042(9)
Author: Sorenson, Steve

Refinement of an ECG-based approach for detecting awakenings in a study on aircraft noise-induced sleep disturbance
pp. 1043-1048(6)
Authors: McGuire, Sarah; Basner, Mathias

An evaluation of aerocynamic noise produced by car side mirrors
pp. 1049-1055(7)
Authors: Duarte Machado, Wagner; Bauzer Medeiros, Eduardo

Protecting historic structures from construction vibration
pp. 1056-1064(9)
Author: Greene, Rob

Noise control strategies: Lessons from Safe-in-Sound Excellence in Hearing Loss Prevention Awards
pp. 1065-1071(7)
Authors: Meinke, Deanna K.; Morata, Thais C.; Hayden, Charles

Presenting a paper at an INCE conference
pp. 1072-1077(6)
Authors: Bolton, J. Stuart; Burroughs, Courtney B.; Donavan, Paul R.; Menge, Christopher W.

An update on the Arizona Quiet Pavement Pilot Program though year eight
pp. 1078-1090(13)
Authors: Donavan, Paul R.; Janello, Carrie

Psychoacoustic analysis of synthesized jet noise
pp. 1091-1100(10)
Authors: Okcu, Selen; Rathsam, Jonathan; Rizzi, Stephen A.

Using the concept of constant divergence of the sound pressure level for determining the free-field sensitivity of microphones by comparison
pp. 1101-1108(8)
Author: Buzduga, Valentin

Effect of rotation on the natural frequencies of coupled tire structural-acoustic modes
pp. 1109-1117(9)
Authors: Cao, Rui; Bolton, J. Stuart

Study of the effect of grazing flow on the performance of microperforated and perforated panels
pp. 1118-1125(8)
Authors: Viswanathan, Arun; Bolton, J. Stuart

Simulation of random response of typical honeycomb panels subjected to a diffuse sound field
pp. 1126-1140(15)
Authors: Gardner, Bryce; Vaz, Ignatius; Ali Hamdi, Mohamed

Testing of fans with microperforated housings
pp. 1141-1149(9)
Authors: Lee, Seungkyu; Bolton, J. Stuart

Imaging contributions to noise measures: The future for simulation tools
pp. 1150-1154(5)
Author: Marburg, Steffen

Vibro-acoustic source characterization of the tub in a washing machine
pp. 1155-1162(8)
Authors: Ih, Jeong-Guon; Oey, Agustinus; Heo, Yong-Ho; Hong, Kyung-Seop

A comparison of hospitabl noise survey results with patient satisfaction scores
pp. 1163-1171(9)
Authors: Van Wyk, Kenric; Miller, Melinda; Murphy, Kristen