INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Direct closed-loop active vibration control system prototype in ANSYS
pp. 1-12(12)
Authors: Takacs, Gergely; Rohal-Ilkiv, Boris

Numerical analysis of the axial vibration of two-pole induction motors caused by electromagnetic forces
pp. 13-20(8)
Author: Bauer, Christian

Medium-high frequency optimization of a passenger cabin mock-up using response surface models of SEA coupling loss-factors
pp. 21-33(13)
Authors: Culla, Antonio; D'Ambrogio, Walter; Fregolent, Annalisa

Free vibration analysis of complex wing structures by refined one-dimensional formulations
pp. 34-43(10)
Authors: Carrera, E.; Pagani, A.; Petrolo, M.

Prediction of flow induced sound and vibration of periodically stiffened plates
pp. 44-52(9)
Authors: Denis, V.; Maxit, L.

Efficient calculation of the acoustic radiation of a stiffened double panel in a cavity using a soar reduction for the mid-frequency range
pp. 53-62(10)
Authors: Chronopoulos, D.; Ichchou, M.; Troclet, B.

Viscous damping of monolithic materials and hybrid composites - A deeper view
pp. 63-73(11)
Authors: Klaerner, M.; Marburg, S.; Kroll, L.

Tests on a direct transmissibility approach to experimental statistical energy analysis
pp. 74-83(10)
Authors: Guasch, O.; Artis, P.; Janer, M.

Identification of uncertain material parameter from experimental modal analysis using inverse stochastic non-sampling method
pp. 84-92(9)
Authors: Sepahvand, K.; Marburg, S.

Modeling vibration transmission in gearbox/shafting systems using an augmented component mode synthesis approach
pp. 93-104(12)
Authors: Hambric, Stephen A.; Shephard, Micah R.; Campbell, Robert L.

Modal analysis of a fluid in an unbounded domain with finite and infinite elements
pp. 105-110(6)
Authors: Retka, Stefanie; Marburg, Steffen

A hierarchical-0ACA technique for large-scale acoustic simulations: Complex geometries with sound absorbent materials
pp. 111-116(6)
Authors: Brancati, A.; Milazzo, A.; Aliabadi, M.H.

A direct method to build the spectral dynamic matrix of waveguides from finite element models
pp. 117-128(12)
Authors: Silva, Priscilla G.; Arruda, Jose R.F.

Employment of an acoustic camera for noise characterisation of a laboratory equipment
pp. 129-136(8)
Authors: Scarselli, Gennaro; Castroini, Elisa

Noise sources in high-speed trains
pp. 137-144(8)
Authors: Noh, Heemin; Choi, Sunghoon; Kim, Seog-won; Kim, Young-guk; Kim, Ki-hwan

Modeling and implementation of interface loss models for linear response simulation in a complex structure
pp. 145-155(11)
Authors: Nadampalli, Ravi V.; Goransson, Peter; Glandier, Christian

a Pade approximant reconstruction scheme for fast resolution of structural-acoustic finite element models including porous materials
pp. 156-168(13)
Authors: Rumpler, R.; Deu, J-L.; Goransson, P.

An equivalent orthotropic plate model for sinusoidal core sandwidth panels in optimization processes
pp. 169-180(12)
Authors: Bartolozzi, G.; Orrenius, U.; Pratellesi, A.; Pierini, M.

Numerical simulation of noise induced by contact between two rough surfaces
pp. 181-187(7)
Authors: Dang, Viet Hung; Le Bot, Alain

Preliminary identifications of sandwich panels
pp. 188-197(10)
Authors: D'Alessandro, V.; Amabili, M.; De Rosa, S.; Franco, F.

Modal decomposition and superposition of sound power with fully coupled FE/BE models
pp. 198-209(12)
Authors: Peters, H.; Kessissoglou, N.; Marburg, S.

Noise and vibration analysis programs based on energy flow analysis, and their applications
pp. 210-219(10)
Authors: Hong, Suk-Yoon; Kwon, Hyun-Wung; Han, Ju-Bum; Song, Jee-Hun

Radiated noise analysis for naval ship using energy flow analysis with fluid loading
pp. 220-228(9)
Authors: Han, Ju-Bum; Hong, Suk-Yoon; Song, Jee-HUn; Kwon, Hyun-Wung; Jeon, Jae-Jin; Jung, Woo-Jin

The finite product method in the theory of linear wave propagation
pp. 229-234(6)
Authors: Sorokin, S.V.; Chapman, C.J.

Reconstruction of acoustical boundary admittance values using 3D-BEM- and 3d-BEM-based inverse formulations
pp. 235-242(8)
Authors: Anderssohn, Robert; Beitelschmidt, Michael; Marborg, Steffen

Investigation of friction induced damping between two clamped beams
pp. 243-252(10)
Authors: Guettler, M.; Klaerner, M.; Marburg, S.

Measuring under non stationary conditions with scanning techniques
pp. 253-259(7)
Authors: Fernandez Comesana, Daniel; Morales Cervera, Sandra; Takeuchi, Takashi; Holland, Keith

"Virtual arrays", A novel broadband sounce localization technique
pp. 260-267(8)
Authors: Fernandez Comesana, Daniel; Wind, Jelmer; de Bree, Hans-Elias; Holland, Keith

Mulitpole moment preserving condensation of volumetric acoustic sources
pp. 268-279(12)
Authors: Croaker, P.; Kinns, R.; Kessissoglou, N.; Marbrug, S.

Application of SMEDA to systems with high mode densities
pp. 280-290(11)
Authors: Stelzer, R.; Totaro, N.; Pavic, G.; Guyader, J-L.

Full stochastic response, pseudo excitation method and pseudo equivalent deterministic excitation: Two simple systems
pp. 291-302(12)
Authors: De Rosa, S.; Franco, F.; Ciappi, E.

Development of a high SPL state-of-the-art portable flanged impedance tube
pp. 303-311(9)
Authors: Murray, Paul B.; Larsen, Flemming S.

Experimental response and identification of floating structures in marine engineering
pp. 312-323(12)
Authors: Dessi, D.; D'Orazio, D.

On a fast frequency sweep approach for the Helmholtz FE problem via model reduction
pp. 324-335(12)
Authors: Lefteriu, Sanda; Lenzi, Marcos S.; Beriot, Hadrien; Desmet, Wim; Tournour, Michel

Automatic recognition of the components of a hybrid FE-SEA model from a finite element model
pp. 336-346(11)
Authors: Langley, R.S.; Kovalevsky, L.

Reliability analysis of complex build-up structures via the hybrid FE-SEA method
pp. 347-358(12)
Authors: Cicirello, A.; Langley, R.S.

On the use of linear aeroacoustic methods to predict whistling in flow duct systems
pp. 359-365(7)
Authors: Karlsson, Mikael; Holmberg, Andreas; Abom, Mats; Kierkegaard, Axel

Time-domain flexural wave intensity measurement and direction estimation in plates
pp. 366-376(11)
Authors: Ng, Nicholas C.J.; Halkyard, C. Roger

A case study of random boundary effects on the mid-frequency vibration of built-up systems
pp. 377-382(6)
Authors: Ji, Lin; Huang, Zhenyu

Improvement of certain inverse acoustic problems by adapting the model
pp. 383-394(12)
Authors: Martin, Vincent; Arruda, Joes Roberto

Proper generalized decomposition applied to acoustical VTCR to obtain predictions over a mid-frequency broad band
pp. 395-400(6)
Authors: Barbarulo, A.; Ladeveze, P.; Riou, H.

Calculation of coupling loss factors using a hybrid finite element/wave and finite element method
pp. 401-412(12)
Authors: Renno, Jamil M.; Manconi, Elisabetta; Mace, Brian R.

High-frequency vibrations of uncertain coupled beams using an image source approach
pp. 413-419(7)
Authors: Cuenca, Jacques; Mace, Brian R.; Ferguson, Neil S.

SAMSARA for thin cylindrical shells
pp. 420-431(12)
Authors: De Rosa, S.; Franco, F.; Polito, T.

A weak-coupled finite element-wave based technique formulation: Application for a noise radiation analysis of a truck exhaust muffler
pp. 432-447(16)
Authors: Rejlek, Jan; Ohenhen, Godwin; Silar, Petra; Priebsch, Hans-Herwig; Galezia, Adam; Hagen, Detlef; Ruschmeyer, Sven

Variability of the interior noise levels of a general aviation aircraft due to installation effects
pp. 448-455(8)
Authors: Marulo, F.; Polito, T.

Design sensitivity analysis of structural-acoustic problems using the wave based method
pp. 456-467(12)
Authors: Koo, Kunmo; Pluymers, Bert; Wang, Semyung; Desmet, Wim

Identification of the mass distribution of a vibrating system through an output-only modal identification technique
pp. 468-479(12)
Authors: Diez, Matteo; Leotardi, Cecilia; Iemma, Umberto

Frequency-domain linearized Navier-Stokes equations for flow duct computational aeroacoustics
pp. 480-491(12)
Authors: Kierkegaard, A.; Abom, M.; Efraimsson, G.

Acoustic feedback control of large reverberant room for space hardware qualification testing
pp. 492-499(8)
Authors: Janssens, K.; Bianciardi, F.; Sabbatini, D.; Debille, J.

Efficient treatment of singularities in wave based models for 2D acoustic scattering problems
pp. 500-511(12)
Authors: Deckers, E.; Vandepitte, D.; Desmet, W.

Wind tunnel measurements of pressure fluctuations and structural response induced by the turbulent boundary layer at high Mach number. Part 1: Velocity andf pressure field characterization
pp. 512-523(12)
Authors: Camussi, R.; Pagliaroli, T.; Ciappi, E.; Magionesi, F.; Imperatore, B.; Marino, A.

Universal scaling for the response of homogeneous and composite panels excited by turbulent flow
pp. 524-532(9)
Authors: Ciappi, Elena; De Rosa, Sergio; Franco, Francesco

Wind tunnel measurements of pressure fluctuations and structural response induced by the turbulent boundary layer at high Mach number, Part 2: Comparisons between experimental and numerical data for the structural response
pp. 533-543(11)
Authors: De Rosa, Sergio; Franco, Francesco; Ciappi, Elena; Magionesi, Francesca; Quaranta, Vincenzo; Vitiello, Pasquale; Di Giulio, Massimiliano

Transmission loss of rib stiffened double-leaf partitions with cavity absorption
pp. 544-551(8)
Authors: Kumar, Sathish; Feng, Leping; Orrenius, Ulf

Dynamic properties of magneto-senstive materials for semi-active noise and vibration control - Mesurements and modelling
pp. 552-557(6)
Authors: Kari, L.; Lejon, J.

Vibration detection by means of NAH in the presence of reflective surfaces
pp. 558-566(9)
Authors: Lopez Arteaga, I.; Mokhtari, M.; Moers, E.T.M.; Scholte, R.; Nijmeijer, H.

Prediction of sound transmission loss through partitions by waveguide FEM and Rayleigh-Ritz procedure
pp. 567-578(12)
Authors: Liu, Hao; Finnveden, S.

High-frequency vibration analysis of fluid-loaded thin plate structures by a scaling approach
pp. 579-588(10)
Author: Li, Xianhui

Acoustic design methodology applied to a VIP helicopter interiors
pp. 589-599(11)
Authors: Perazzolo, A.; Scaini, S.

Optimal vibration control of beams subjected to a moving mass
pp. 600-605(6)
Authors: Stancioiu, D.; Ouyang, H.

Meshfree reproducing kernel particle methods for the numerical simulation of acoustic wave propagation
pp. 606-617(12)
Authors: Barbieri, Ettore; Meo, Michele; Petrinic, Nik

Comparison of the computational expense of hybrid FEM/SEA and FEM calculation
pp. 618-628(11)
Author: Peiffer, Alexander

Nano vibrations of flexural structures: Quantum-mechanics approach
pp. 629-634(6)
Author: Carcaterra, A.

Energy distribution in impulsively excited structures
pp. 635-646(12)
Authors: Carcaterra, A.; Roveri, N.

Vibration-based nano-mechanical transistor: Theoretical modeling and numerical simulations
pp. 647-658(12)
Authors: Scorrano, A.; Carcaterra, A.

Air vent noise prediction for a commercial aircraft's environmental control system
pp. 659-669(11)
Authors: De Fenza, A.; Daniele, E.; Borrelli, D.; Di Giulio, M.; Lecce, L.

Energy finite element analysis (EFEA) approach for fuselage noise prediction
pp. 670-680(11)
Authors: Amoroso, F.; De Fenza, A.; Linari, M.; Di Giulio, M.; Lecce, L.

High-speed video microscopy of the resonant modes of a smart beam
pp. 681-692(12)
Authors: Takacs, Gergely; Rohal-Ilkiv, Boris

Local measurement of thin plate thickness by circle method for flexural waves
pp. 693-701(9)
Authors: Pagneux, V.; Etaix, N.; Ing, R.K.

Application of beamforming and deconvolution techniques to aeroacoutic sources at highspeed trains
pp. 702-712(11)
Authors: Sarradj, Ennes; Geyer, Thomas; Brick, Haike; Kirchner, Karl-Richard; Kohrs, Tosten

The effect of compromises in equipment deployed in the implementation of the Acrienne method
pp. 713-724(12)
Authors: Mahon, J.; Ghosh, B.; Rice, H.

Mathematical link between direct transmissibility functions and the discrete characterization of mechanical systems
pp. 725-736(12)
Authors: Jove, J.; Guasch, O.

Predicting the transmission loss of acoustic ducts across a broad frequency range
pp. 737-747(11)
Authors: Cotoni, V.; Shorter, P.

Predicting the acoustics of rattle
pp. 748-758(11)
Authors: Shorter, P.; Cotoni, V.; Langley, R.; Merz, S.

Interior noise design of quiet passenger cabin in business aviation through statistical energy analysis
pp. 759-769(11)
Authors: Aversano, Marco; Pagnozzi, Gennaro

Low-wavenumber turbulent boundary layer shear-stress measurements from vibration data and on a cylinder in pipe flow
pp. 770-784(15)
Authors: Bonness, William K.; Capone, Dean E.

Stochastic boundary element method to predict the effects of geometrical uncertainties in the mid-frequency vibro-acoustic analysis
pp. 785-796(12)
Authors: D'Amico, R.; Pratellesi, A.; Pierini, M.

Characterisation of an airborne noise source by field sub-structuring
pp. 797-806(10)
Author: Pavic, Goran

A quarter vehcile transfer path analysis by in-situ measurement
pp. 807-813(7)
Authors: Elliot, A.S.; Moorhouse, A.T.

Indirect measurement of frequency response functions applied to the problem of substructure coupling
pp. 814-820(7)
Authors: Moorhouse, A.T.; Elliott, A.S.