INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Noise and vibration phenomena in aircraft wheel and brake systems
pp. 3-10(8)
Author: Rook, Todd E.

Sonic boom: from bang to puff
pp. 11-23(13)
Author: Plotkin, Kenneth J.

Effects of building mechanical system noise on worker performance and perception
pp. 24-37(14)
Author: Wang, Lily

Creation of combined noise maps for noise prediction in petrochemical plants
pp. 38-49(12)
Author: Ghosh, Arindam

Refinement of vehicle interior noise by reduction of driveline vibrations
pp. 50-62(13)
Authors: Tandogan, Okan; Yapici, Tarkan; Doganli, Mert; Sevginer, Caner

Nighttime construction noise - NCHRP Project 10-78
pp. 63-71(9)
Authors: Schexnayder, Cliff; Shane, Jennifer S.

Deep dynamic compaction (DDC) ground-borne vibration generation
pp. 72-78(7)
Authors: Yazdanniyaz, Amir; Bui, Sean

Cooling fan noise reduction by optimizing spacing of blades
pp. 79-87(9)
Authors: Wang, John; Kompella, Murty; Pisupati, Mani

Rising to the challenges of noise monitoring around construction sites
pp. 88-96(9)
Authors: Manvell, Doug; Alexander, Martin

A method for measuring indoor noise levels from traffic with ulterior noise sources
pp. 97-104(8)
Author: Oldakowski, Daniel

Remote construction noise monitoring
pp. 105-110(6)
Author: Gharabegian, Areg

Planar nearfield acoustical holography in high-speed, subsonic flow
pp. 111-123(13)
Authors: Kim, Yong-Joe; Kwon, Hyusang

Development of hybrid one-dimensional finite element/analytical method for analysis of Lamb wave propagation characteristics in composite panels
pp. 124-127(4)
Authors: Kim, Yong-Joe; Han, Je-Heon

Vibro-acoustic model of an enclosed electric power generator
pp. 128-137(10)
Authors: Copley, David C.; Raman, Harvind

Fan noise prediction for design
pp. 138-149(12)
Author: Oppenheimer, Charles

Developing a basis for efficient railroad horn testing
pp. 150-158(9)
Authors: Erdreich, John; Keefe, Joseph A.

Prediction of subjective annoyance for transient sounds using a novel loudness-based impulsiveness measure
pp. 159-170(12)
Authors: Willemsen, Andrew M.; Rao, Mohan D.

Acoustics of technology-enabled collaborative learning environments
pp. 171-176(6)
Authors: Babich, Jeffrey E.; Coudriet, Gregory A.

Calculation of optimal damping placement in a vehicle interior
pp. 177-186(10)
Authors: Birkett, Craig; Tang, Poh-Soong; Featherman, Dieter

Construction noise impact prediction using non-virtual simulation
pp. 187-196(10)
Authors: Green, Rob; Brinckerhoff, Parsons

Suggested modifications to American Society of Testing Materials test method D 447
pp. 197-208(12)
Author: Lilly, Jerry G.

An approach to noise impact assessment for long term construction
pp. 209-216(8)
Author: Babic, Frank N.

Evaluation of crowd noise in Beaver Stadium during a 2009 Penn State football game
pp. 217-228(12)
Authors: Barnard, Andrew; Hambric, Stephan; Porter, Steve

New York City Western Rail Yard construction noise study
pp. 229-244(16)
Author: Thalheimer, Erich

Vibration transfer path analysis on fender noise control
pp. 245-251(7)
Author: Liang, Paul

Estimating construction noise using the Environmental Science Research Institutes geographic information systems program
pp. 252-256(5)
Author: Noel, Scott

Impact of personal video recorder/digital video recorder on hard disk drive acoustic requirements
pp. 257-264(8)
Author: Ali, Dave

Relating exterior and interior noise during road construction
pp. 265-275(11)
Author: Connolly, Sean

Loudness models applied to technical sounds
pp. 276-288(13)
Author: Sottek, Roland

Determining sound quality judgments for metric development
pp. 289-302(14)
Authors: Fiebeg, Andre; Genuit, Klaus

Need for standardization of psychoacoustics
pp. 303-316(14)
Authors: Genuit, Klaus; Fiebig, Andre

Loss mass high transmission loss portable quiet room for very important personnel protection
pp. 317-325(9)
Author: Rubino, Mark A.

Analysis of sound measurements inside a finite length ducted rotor
pp. 326-335(10)
Authors: Morris, Scott; Tomko, Jason; Stephen, David B.

Pipe noise prediction and sound insulation design by using modeling and field measurements
pp. 336-349(14)
Author: Squadrone, Giuseppe

Proactive regulation engenders creative innovation - Quieting the jack hammer
pp. 350-362(13)
Authors: Zwerling, Eric; Shamoon, Charles

Development of NASA Glenn Research Center Auditory Demonstration Laboratory facility and operational capabilities
pp. 363-370(8)
Authors: Cooper, Beth A.; Schmitt, Jeff G.; Nelson, David A.

Printer impulse noise metrics: Sensitivity and repeatability analysis
pp. 371-379(9)
Authors: Baird, Terry; Ferguson, Katy

New York City: The (E) designation and restrictive declaration
pp. 380-385(6)
Author: Sachwald, Benjamin H.

Variation in measured force density levels of rail transit vehicles
pp. 386-395(10)
Authors: Rajaram, Shankar; Saurenman, Hugh

How good is RCNM for predicting highway construction noise impacts?
pp. 396-405(10)
Authors: Wallace, Marc C.; Callahan, Ryan T.

Analysis and design of new floating slab track for special trackwork using Finite Element Analysis (FEA)
pp. 406-413(8)
Author: Phillips, James E.

A method for determining the force spectrum produced by mechanical equipment
pp. 414-423(10)
Authors: Gorton, Andrew; Papadimos, Chris

Using the Federal Highway Administration roadway construction noise model for the Jerome Park Reservoir construction project
pp. 424-436(13)
Authors: Yanez-Uribe, Gabriella; Thalheimer, Erich

Measuring recreational firearm noise
pp. 437-448(12)
Authors: Rasmussen, Per; Flamme, Greg; Stewart, Mechael; Meinke, Deanna; Lanford, James

An investigation of the noise dynamics in a southern Illinois underground coal mine
pp. 449-458(10)
Authors: Szary, Marek L.; Chugh, Yoginder P.; Bell, Bill; Hirschi, Joseph

Contemporary consulting practice in California's Central Coast
pp. 459-462(4)
Author: Lord, David

Flanking paths associated with exposed roof decks in condominiums
pp. 463-475(13)
Author: Kwolkoski, Jeffrey P.

Heating, ventilation and air conditioning flexible duct acoustical solutions
pp. 476-481(6)
Author: Silverman, Neil A.

The dB[EQL]: An alternative sound pressure weighting according to the equal loudness contours of ISO 226:2003
pp. 482-489(8)
Authors: Bray, Wade; Caspary, Georg

The development of NASA Auditory Demonstration Laboratory for measurement of real ear attenuation of hearing protection devices
pp. 490-499(10)
Authors: Schmitt, Jeff G.; Cooper, Beth A.; Nelson, David A.

Effects of frequency and depth on attenuation of ambient ground vibration
pp. 500-510(11)
Authors: Amick, Hal; Gendreau, Michael; Xiong, Blong; Simos, Nikolaos

Noise generation in contraction joints in Portland cement concrete
pp. 511-522(12)
Authors: Dare, Tyler; Bernhard, Robert

Exposure to recreational/occupational shooting range noise vs. industrial impulsive noise
pp. 523-528(6)
Author: Hale, Marlund E.

Dissipative diesel engine exhaust muffler featuring sintered metal fiber as acoustical fill liner
pp. 529-537(9)
Author: Storm, Mark C.

Optimal silencer baffle positioning within an air handling unit
pp. 538-546(9)
Author: Storm, Mark C.

Sound transmission through double wall aircraft structures - Mounting effect
pp. 547-555(9)
Authors: Neple, Pascale; Atalla, Noureddine; Bolduc, Maxime

The need for a "Green" sound of E-cars - The challenge of Passung
pp. 556-562(7)
Author: Schulte-Fortkamp, Brigitte

Conformal mapping based on spherical array measurements: Noise source identification in a car
pp. 563-571(9)
Author: Haddad, Karim

Impact of damping uncertainty on SEA model response variance
pp. 572-582(11)
Authors: Schiller, Noah; Cabell, Randolph; Grosveld, Ferdinand

Quiet, efficient fans for spacecraft: An overview of NASA's Technology Development Plan
pp. 583-592(10)
Author: Koch, L. Danielle

Estimation of the errors caused by the sample size effect on the in situ measurement of the absorption coefficient
pp. 593-602(10)
Authors: Brandao, Eric; Fulco, Erico R.; Lenzi, Arcanjo

Acoustical benefits of energy efficient elevator systems
pp. 603-611(9)
Author: Joshi, Darshit

3D audio interface: A user's survey
pp. 612-623(12)
Authors: Abouchacra, Kim S.; Sinno, Solara; Letowski, Tomasz

Noise reduction under the hood of a portable air-purified respirator system by means of a muffler insert
pp. 624-630(7)
Author: Marsh, Robert

The noise from flow over rough surfaces with small and large roughness elements
pp. 631-636(6)
Authors: Glegg, Stewart; Devenport, William; Rasnick, Matthew; Alexander, Nathan

Meteorolgical influence on highway noise barrier performance, A case study
pp. 637-646(10)
Authors: Burge, Paul; Sytsma, Jon; Zurburg, Tom

Speech intelligibility of air conducted and bone conducted speech over radio transmission
pp. 647-653(7)
Authors: Tran, Phuong K.; Letowski, Tomasz R.

From development to evaluating effectiveness in industry: Building a research model for noise control technology effects
pp. 654-663(10)
Authors: Reinke, Dana C.; Smith, Adam K.

Effect of intrinsic parameters on sound absorption and transmission loss - A parametric study
pp. 664-673(10)
Authors: Shravage, Paresh; Jain, Sachin; Karanth, Nagesh

Sound isolation provided by shading screens applied in facades
pp. 674-683(10)
Authors: Matos, Jorge E.; Carvalho, Antonio P.O.

Achieving the minimum impact insulation class 50 rating using resilient clip technology in lightweight constructions
pp. 684-691(8)
Author: Byrick, Wilson R.

Low wavenumber turbulent boundary layer fluctuating wall shear stress measurements from vibration data on a cylinder in pipe flow
pp. 692-704(13)
Authors: Bonness, William K.; Capone, Dean E.; Hambric, Stephen A.

Wheel vibration absorber performance
pp. 705-714(10)
Author: Nelson, James Tuman

A hearing protector model for predicting impulsive noise hazard
pp. 715-726(12)
Author: Kalb, Joel T.

Monitoring construction vibrations at sensitive facilities
pp. 727-732(6)
Authors: Newmark, Marc S.; Zapfe, Jeffrey A.; Wood, Eric W.

Coupling loss factor estimation for plates joined at a point: Analysis and experiment
pp. 733-743(11)
Authors: Ewing, Mark; Vatti, Kranthi

Low frequency sound and infrasound from wind tunnels - A status update
pp. 744-755(12)
Authors: O'Neal, Robert D.; Hellweg Jr., Robert D.; Lampeter, Richard M.

Noise control evaluation for a concrete batch plant
pp. 756-763(8)
Author: O'Neal, Robert D.

Overview of aircraft en route noise predictions using an integrated model
pp. 764-774(11)
Authors: He, Hua (Bill); Boeker, Eric

Vibroacoustic characterization of a commercial airliner bulkhead
pp. 775-782(8)
Authors: Allen, Albert; Moeller, Mark J.; Poling, Hugh; Barker, Gail

Modeling freighter aircraft interior noise
pp. 783-790(8)
Authors: Moeller, Mark J.; Allen, Albert; Barker, Gail M.; Poling, Hugh

Classroom noise at the Applied Research Laboratory Penn State University
pp. 791-796(6)
Author: Long, Marshall

Modular room design
pp. 797-808(12)
Author: D'Anna, Craig

Techniques for measuring the propagation speed of vibration waves in the ground
pp. 809-817(9)
Author: Nash, Anthony

Active noise control of multiple cooling fans
pp. 818-825(8)
Authors: Rust, Ryan L.; Blotter, Jonathan D.; Sommerfeldt, Scott D.; Gee, Kent L.

Retrofit structural insulated panels (SIPs) increase sound transmission loss of existing single family houses impacted by highway noise
pp. 826-838(13)
Author: Harvey, Scott

Tri-axial measurement of roadway vibration in multiple research buildings located throughout an urban college campus
pp. 839-846(8)
Authors: Harvey, Scott; Curley, Josh; Thalheimer, Erich

Modeling of noise from aircraft taxiing operations
pp. 847-860(14)
Authors: Page, Juliet A.; Hobbs, Christopher M.

Acoustics of energy efficient hand dryers: Is this progress?
pp. 861-871(11)
Authors: Fullerton, Jeffrey L.; Unger, Gladys

Acoustic repropagation technique and practical source characterization for simulation noise model databases
pp. 872-883(12)
Authors: Hobbs, Christopher M.; Page, Juliet; Schultz, Troy

Improving screw compressor housing design using simulation
pp. 884-891(8)
Authors: Herrin, D.W.; Tao, Z.; Graybill, A.J.; Bender, J.E.; Marks, P.C.; Eichelberger, C.

Designing partial enclosures to minimize airborne sound transmission
pp. 892-901(10)
Authors: Carter, A.E.; Herrin, D.W.; Shi, J.; Copley, D.C.

Comparision of SEA modeling approaches for vibration transmission through beam structures
pp. 902-913(12)
Authors: Vaz, Ignatius; Gardner, Bryce; Cotoni, Vincent; Wang, Shuo

Modeling ground response functions in rock: A comparison of two methodologies
pp. 914-919(6)
Authors: Glickman, Gary M.; Nelson, James T.

Predictability of field airborne noise isolation from laboratory testing
pp. 920-928(9)
Authors: LoVerde, John; Dong, Wayland

Application of microphone frequency response and windscreen insertion loss corrections on sound power determinations
pp. 929-938(10)
Authors: Ristroph, Einar G.; Black, Michael D.; Phillips, John A.

Transit noise and community choices
pp. 939-952(14)
Authors: El-Aassar, Ahmed A.; Dubbink, David T.

Concrete pier foundation and building design for electon microscope installations with vibration disturbances from train, truck, and bus traffic
pp. 953-961(9)
Author: Himmel, Chad N.

Application of atmospheric absorption models for aircraft en route noise
pp. 962-969(8)
Authors: Poulain, Kieran; Sparrow, Victor; Brentner, Kenneth; Sutherland, Louis

Case study: Computer modeling of rooftop mechanical equipment for exterior noise mitigation with empirical validation
pp. 970-981(12)
Authors: Wowk, Roman; Papadimos, Chris