INTER-NOISE and NOISE-CON Congress and Conference Proceedings
ISSN 0736-2935 (Print)
The Noise-Con conference proceedings are sponsored by INCE/USA and the Inter-Noise proceedings by I-INCE. NOVEM (Noise and Vibration Emerging Methods) conference proceedings are included. All NoiseCon Proceedings one year or older are free to download. InterNoise proceedings from outside the USA older than 10 years are free to download. Others are free to INCE/USA members and member societies of I-INCE.
Publisher: Institute of Noise Control Engineering on behalf of International Institute of Noise Control Engineering
- Membership Information
- INCE Subject Classification
- Ingenta Connect is not responsible for the content or availability of external websites
Articles
Using the Noise Perception Index for assessing wind turbine noise
pp. 794-802(9)
Author:
Hessler, George
Acoustical characteristics in ground and underground railway station with different platforms
pp. 803-810(8)
Authors:
Soeta, Yoshiharu; Shimokura, Ryota
Digital filters based on FDTD simulations for accurately verifying the performance of hearing protectors
pp. 811-818(8)
Authors:
Bockstael, Annelies; Botteldooren, Dick; Vinck, Bart
Vibration of concrete hollow core elements induced by human walking
pp. 819-827(9)
Authors:
Bard, Delphine; Johanssom, Pia; Persson, Kent; Thelandersson, Sven
Evaluation of hearing protectors with high level impulse noise using explosive charges
pp. 828-835(8)
Authors:
Buck, Karl; DeMezzo, Sebastien; Zimpfer, Véronique
The propagated uncertainty of EN12354-1 for lightweight building constructions
pp. 836-843(8)
Authors:
Mahn, Jeffrey; Pearse, John
In situ determination of transformer sound power levels - Part 2: Results
pp. 844-853(10)
Authors:
Gosselin, Blaise; Duchassin, Franck; Chamberland, Claude
In situ determination of transformer sound power levels - Part 1: Methods
pp. 854-860(7)
Authors:
Duchassin, Franck; Gosselin, Blaise; Chamberland, Claude
A comparison of two and four microphone standing wave tube procedures for estimating the normal incidence absorption coefficient
pp. 861-869(9)
Authors:
Kunio, Jason; Yoo, Taewook; Bolton, J. Stuart; Hou, Kang; Enok, Jan
On soundscapical correctness: An acoustic design policy for public spaces
pp. 879-886(8)
Author:
Nagahata, Koji
Prediction of vocal effort and speakers comfort in lecture rooms
pp. 887-895(9)
Authors:
Pelegrín-García, David; Brunskog, Jonas
Achieving speech privacy with reasonable sound insulation and masking background noise
pp. 896-902(7)
Authors:
Keränen, Jukka; Hongisto, Valtteri
In duct measurements: Experiences and improvements
pp. 903-908(6)
Authors:
Scholz, Ulrich; Klockar, Christine; Prette, Marco
Dynamic noise modeling at roundabouts
pp. 909-915(7)
Authors:
Lelong, Joel; Chevalier, Estelle; Leclercq, Ludovic; Chatagnon, Roger
New vehicle noise emission for French traffic noise prediction
pp. 916-924(9)
Authors:
Lelong, Joel; Le Duc, Emmanuel; Doisy, Sonia
Prediction of the insertion loss of large enclosures using a combined SEA/image sources approach
pp. 925-933(9)
Authors:
Sgard, Franck; Nelisse, Hugues; Atalla, Noureddine; Amedin, Celse Kafui; Oddo, Remy
Subjective evaluation of tonalness and relation between tonalness and unpleasantness
pp. 934-941(8)
Authors:
Parizet, Etienne; Bolmont, Armand; Fingerhuth, Sebastian
Using SPMSoft to assess privacy in open-plan offices
pp. 942-950(9)
Author:
Bradley, John
Comparisons of in-situ sound measurements using the sound pressure and sound intensity methods
pp. 951-958(8)
Author:
Li, Weidong
Evaluation of a hard walled room for reverberant power measurements: What is "good enough"?
pp. 959-967(9)
Authors:
Conlon, Stephen; Hambric, Stephen
Hydraulic excavator noise control case study as part of a comprehensive mitigation plan of an integrated open-pit coalmine and powerplant
pp. 968-974(7)
Authors:
Faszer, Andrew; Faszer, Clifford; MacDonald, Roderick; Faszer, Matthew
Noise management plans for leisure noise?
pp. 975-980(6)
Authors:
Burgess, Marion; Williams, Warwick
Self-assessment of hearing status and risk of noise-induced hearing loss in workers from rolling stock plant
pp. 981-989(9)
Authors:
Pawlaczyk-Luszczynska, Malgorzata; Dudarewicz, Adam; Zamojska, Malgorzata; Sliwinska-Kowalska, Mariola
The environmental sound evaluation by using a complexity of wave shape
pp. 990-998(9)
Authors:
Makabe, Yoshiaki; Shibayama, Hideo
Case studies on auralization of transfer paths
pp. 999-1004(6)
Author:
Vorlaender, Michael
Noise exposure from communications headsets: The effects of external noise, device attenuation and effective listening signal-to-noise ratio
pp. 1005-1012(8)
Authors:
Giguère, Christian; Dajani, Hilmi R.
A predictive model of speech intelligibility in noise for normal and hearing-impaired listeners wearing hearing protectors
pp. 1013-1021(9)
Authors:
Giguere, Christian; Laroche, Chantal; Vaillancourt, Veronique; Soli, Sigfrid S.
Road traffic noise prediction model "ASJ RTN-Model 2008" proposed by the Acoustical Society of Japan - Part 1: The framework and the flow of calculation
pp. 1022-1027(6)
Author:
Yamamoto, Kohei
The influence of propagation surface for interior source localization
pp. 1028-1035(8)
Authors:
Deblauwe, Filip; Janssens, Karl; Shirk, Noah
Sound intensity on an absorber in reverberant conditions
pp. 1036-1041(6)
Author:
Jeong, Cheol-Ho
Emission, propagation and control of road traffic moise: Some solutions for the future
pp. 1042-1050(9)
Author:
Berengier, Michel
Experiences in noise control education in architecture
pp. 1051-1060(10)
Authors:
Yuksel Can, Zerhan; Maffei, Luigi; Semidor, Catherine; Kang, Jian
Measurement methodology and survey of noise exposure in call centres using headphones
pp. 1061-1069(9)
Authors:
Trompette, Nicolas; Chatillon, Jacques
Field versus laboratory sound insulation of windows
pp. 1070-1077(8)
Authors:
Olafsen, Sigmund; Strand, Maria Kristin
Analyses of The Directive 2002/49/EC and proposals for improvement
pp. 1078-1081(4)
Author:
Lechner, Christoph
Sound level meters calibration in simulated free-field
pp. 1082-1087(6)
Author:
Soares, Zemar
Distributed system for extended field measurements of sonic booms
pp. 1088-1094(7)
Author:
Veggeberg, Kurt
Noise measurement system meets new ISO standards in pass by noise with unique global positioning and triggering capabilities.
pp. 1095-1102(8)
Author:
Copeland, Timothy
Speech estimation using body-conducted speech microphone in noisy environment
pp. 1103-1107(5)
Authors:
Nakayama, Masashi; Ishimitsu, Shunsuke; Nakagawa, Seiji
An experimental procedure to minimize traffic noise inside bus stations: A case study in Brazil
pp. 1108-1114(7)
Authors:
Rodrigues, Frederico; Franco, Luiza; Alberto Faria, Carlos
Composite fuselage characteristics and additional considerations for noise control treatments
pp. 1115-1122(8)
Authors:
Gries, David; Sheth, Hemang
Subjective impression of copy machine noises: An improvement of their sound quality based on physical metrics
pp. 1123-1131(9)
Authors:
Takehira, Osamu; Kuwano, Sonoko; Namba, Seiichiro; Fastl, Hugo
Predicting noise reduction by electrification of automobiles
pp. 1132-1137(6)
Authors:
Yoshinaga, Hiroshi; Namikawa, Yoshiharu
Visualization of sound energy flows across coupled-volume systems
pp. 1138-1145(8)
Authors:
Jing, Yun; Xiang, Ning
Social survey on community response to aircraft noise in Ho Chi Minh city
pp. 1146-1154(9)
Authors:
Yano, Takashi; Nguyen, Thu Lan; Nishimura, Tsuyoshi; Sato, Tetsumi
Noise from rooftop mechanical systems in residential buildings
pp. 1155-1160(6)
Author:
Nash, Anthony
Design of light weight constructions - risks and opportunities
pp. 1161-1169(9)
Authors:
Hagberg, Klas; Persson, Tommy; Hook, Matilda
Sound absorption characteristics of a honeycomb-backed microperforated panel absorber: Revised theory and experimental validation
pp. 1170-1177(8)
Authors:
Sakagami, Kimihiro; Yamashita, Ippei; Yairi, Motoki; Morimoto, Masayuki
Measurement of tyre/road surface noise with close-proximity method in Hong Kong
pp. 1178-1187(10)
Authors:
Ng, Wai Kwong; Ng, Ping Sum; Hung, Wing Tat
Simple method for predicting noise in the vicinity of signalized intersections
pp. 1188-1196(9)
Authors:
Namikawa, Yoshiharu; Yoshinaga, Hiroshi; Tajika, Terutoshi; Oshino, Yasuo; Yoshihisa, Koichi; Yamamoto, Kohei
Optimization of the acoustic performances of lightweight sandwich roof elements
pp. 1197-1205(9)
Authors:
Dijckmans, Arne; Vermeir, Gerrit; Niggebrugge, Jan Willem
Analysis of annoying low frequency noise boilers rooms
pp. 1206-1214(9)
Author:
Ziaran, Stanislav
Noise exposure of engine drivers to noise - New challenges resulting from the EU Noise Directive
pp. 1215-1220(6)
Authors:
Paulsen, Reimer; Dantscher, Sandra
A new look at acoustical criteria for classrooms
pp. 1221-1229(9)
Author:
Bradley, John
Establishing relationships between acoustic and physical properties of shoddy-based fibre absorbers
pp. 1230-1235(6)
Authors:
Manning, John; Panneton, Raymond
Random incidence absorption from oblique absorption measurement
pp. 1236-1244(9)
Author:
Gagliardi, John
Speech privacy: The 2009-10 LEED, AIA and ASHE criteria for healthcare facilities
pp. 1245-1248(4)
Author:
Sykes, David
Validation of a novel TPA method for test-based NVH troubleshooting
pp. 1249-1258(10)
Authors:
Janssens, Karl; Gajdatsy, Peter; Tamarozzi, Tommaso; Rubio, Gustavo; Britte, Laurent; Van der Auweraer, Herman; Shirk, Noah; Stoica, Mihai
Structureborne noise control of oscillating pumps
pp. 1259-1267(9)
Authors:
Zmijevski, Thiago; Weisbeck, Jeff; Sanetick, Robert
Resonance of nanofibrous thin membranes depending on their sequence
pp. 1268-1275(8)
Author:
Kalinova, Klara
Passive reduction of noise in an automotive compartment: Effect of engine bay and partitions
pp. 1276-1284(9)
Author:
Kruntcheva, Mariana
On the possible role of short-range shock formation and coalescence in jet aeroacoustic source characterization
pp. 1285-1291(7)
Authors:
Shepherd, Micah R.; Gee, Kent L.
High frequency noise generation by impinging jets
pp. 1292-1299(8)
Authors:
Ramakrishnan, Ramani; Raimondo, Sergio; Grewal, Anant; Elfstrom, Gary
Optimum configuration of intake duct system integrating porous duct for pleasant interior noise
pp. 1300-1308(9)
Authors:
Tsuchida, Takashi; Aritake, Yoshiki; Kitahara, Senji; Takao, Hideo; Hatano, Shigeko; Shin, Sung-Hwan; Hashimoto, Takeo
Reduction of sound radiation using extended radiation modes
pp. 1309-1314(6)
Authors:
Yamaguchi, Zenzo; Bolton, J. Stuart
The setting up and uncertainty evaluation of vibration accelerometer calibration system by comparison method
pp. 1315-1323(9)
Authors:
Huang, Yeu-Jong; Chen, Chao-Jung; Wang, Sheng-Hang; Chen, Jiun-Kai
Autoregressive spectrum analysis of cylinder head vibration and marine diesel engine condition monitoring
pp. 1324-1331(8)
Author:
Zhu, Jianyuan
Looking at spech privacy in buildings: a few considerations
pp. 1332-1337(6)
Authors:
Asselineau, Marc; Serra, Maud; Gaulupeau, Aline
Noise source ranking of an all-terrain vehicle to meet pass-by target
pp. 1338-1346(9)
Authors:
Lu, Ming-Hung; Jen, Ming Une
Evaluation of noise emission of in-service vehicles
pp. 1347-1352(6)
Authors:
Au, Hom; Cheng, Kin Wui; Yeung, Maurice
An algorithm to adjust the clarity of room impulse responses for subjective tests
pp. 1353-1361(9)
Authors:
Huszty, Csaba; Augusztinovicz, Fulop; Sakamoto, Shinichi
LDA investigation of the acoustic field above a perforated liner with grazing and bias flow
pp. 1362-1370(9)
Authors:
Piot, Estelle; Micheli, Francis; Simon, Frank
Optimization of multiple-layer microperforated panels by simulated annealing
pp. 1371-1378(8)
Authors:
Ruiz, Heidi; Cobo, Pedro; Siguero, Manuel
Auxiliary equipments: How they can affect hall's acoustical quality
pp. 1379-1384(6)
Authors:
Cocchi, Alessandro; Semprini, Giovanni
An improved method for flexibly creating a localized sound field reproduction zone
pp. 1385-1390(6)
Authors:
Tanaka, Kazuyo; Hashimoto, Yasuharu; Mikawa, Masahiko
Hand-arm vibration levels caused by pneumatic wrenches and pneumatic/electric knives, ways of limiting DC-Shift
pp. 1391-1400(10)
Authors:
Duee, Raphaël; Chavallard, Jean-Yves
Thermo-acoustic properties of floors made of concrete and scraps from electric wires
pp. 1401-1408(8)
Authors:
Asdrubali, Francesco; D'Alessandro, Francesco; Baldinelli, Giorgio
Computational model for long-range nonlinear propagation over urban cities
pp. 1409-1417(9)
Authors:
Leissing, Thomas; Soize, Christian; Jean, Philippe; Defrance, Jérôme
Design of quarter wave tube for engine intake noise attenuation by finite element analysis
pp. 1418-1425(8)
Authors:
Elwali, Wael; Caliskan, Mehmet; Koyuncu, Atayil; Yilmaz, Ilker
Measurement of effective hearing protection device attenuation during a workshift in industrial plants
pp. 1426-1434(9)
Authors:
Nelisse, Hugues; Gaudreau, Marc-Andre; Laville, Frederic; Boutin, Jerome; Voix, Jeremie
Standards for calculating loudness of stationary or time-varying sounds
pp. 1435-1440(6)
Authors:
Fastl, Hugo; Voelk, Florian; Straubinger, Martin
Design and testing of an active constrained layer damping demonstrator for aircraft's cabin noise reduction
pp. 1441-1450(10)
Authors:
Vigliotti, Andrea; Sorrentino, Assunta
Achieving acoustical code requirements in lightweight multi-family dwellings
pp. 1451-1458(8)
Author:
Babich, Jeffrey
Application of the tranquillity rating prediction tool
pp. 1459-1467(9)
Authors:
Watts, Greg; Pheasant, Rob; Horoshenkov, Kirill
Vocal effort level distribution in speech intelligibility and privacy assessment - The knowledgebase and necessary further work
pp. 1468-1476(9)
Author:
Li, Francis F.
Assessment and measurement of occupational noise exposure - A three-step approach
pp. 1477-1482(6)
Authors:
Thiery, Léon; Jacques, Jean
Minimizing the sound radiated by a cylindrical shell
pp. 1483-1490(8)
Authors:
Shepherd, Micah R.; Hambric, Stephen A.
Laboratory studies on sonic crystal noise barriers
pp. 1491-1496(6)
Authors:
Chong, Alvin Yung Boon; Taherzadeh, Shahram; Attenborough, Keith
Architectural and acoustic design for speech privacy
pp. 1497-1501(5)
Author:
Roy, Kenneth P.
Acoustics of elementary school classrooms: Correlations of varying background noise level and reverberation time to student achievement
pp. 1502-1506(5)
Authors:
Ronsse, Lauren M.; Wang, Lily M.
Calculation using box counting method for Fractal dimension in an AC electric motor vibration
pp. 1507-1512(6)
Authors:
Naoe, Nobuyuki; Imazawa, Akio; Matsumoto, Norihisa; Minamide, Akiyuki
Research on the acceptability evaluation of sounds to warn the approach of an electric vehicle
pp. 1513-1521(9)
Authors:
Sekine, Michiaki; Tanaka, Takeharu; Sakamoto, Ichiro; Morita, Kazumoto
Effects of acoustic properties of vehicle horn on auditory impression and estimation of the aim of another driver's horn usage
pp. 1522-1530(9)
Authors:
Takada, Masayuki; Takeno, Ayako; Iwamiya, Shin-ichiro
Methodology for acoustic design education in Kyushu University
pp. 1531-1536(6)
Authors:
Omoto, Akira; Samejima, Toshiya
Wideband sound absorber obtained by combination of two microperforated panel absorbers with different air-cavity depths arranged in parallel
pp. 1537-1543(7)
Authors:
Yairi, Motoki; Takebayashi, Kenichi; Sakagami, Kimihiro; Morimoto, Masayuki
Prediction of the acoustic performance of floor coverings on lightweight floors
pp. 1544-1552(9)
Authors:
Guigou-Carter, Catherine; Foret, Remy; Chene, Jean-Baptiste; Villot, Michel
Numerical optimisation of liners for the aero-engine intake of a supersonic aircraft
pp. 1553-1560(8)
Authors:
Malbéqui, Patrice; Bourrat, Luc
Measurement of subwoofer directivity in non-anechoic rooms
pp. 1561-1568(8)
Authors:
Langrenne, Christophe; Chartrain, Pierre-Emile; Melon, Manuel; Garcia, Alexandre
Practical aspects of QA in noise mapping
pp. 1569-1574(6)
Authors:
Krapf, Klaus-Georg; Wetzel, Edgar
- Access Key
- Free content
- Partial Free content
- New content
- Open access content
- Partial Open access content
- Subscribed content
- Partial Subscribed content
- Free trial content