INTER-NOISE and NOISE-CON Congress and Conference Proceedings
ISSN 0736-2935 (Print)


The Noise-Con conference proceedings are sponsored by INCE/USA and the Inter-Noise proceedings by I-INCE. NOVEM (Noise and Vibration Emerging Methods) conference proceedings are included. All proceedings older than 5 years are free to download. Others are free to INCE/USA members and member societies of I-INCE.
Publisher: Institute of Noise Control Engineering
- Membership Information
- INCE Subject Classification
- Ingenta Connect is not responsible for the content or availability of external websites
Articles
Using the Noise Perception Index for assessing wind turbine noise
pp. 794-802(9)
Author:
Hessler, George
Acoustical characteristics in ground and underground railway station with different platforms
pp. 803-810(8)
Authors:
Soeta, Yoshiharu; Shimokura, Ryota
Digital filters based on FDTD simulations for accurately verifying the performance of hearing protectors
pp. 811-818(8)
Authors:
Bockstael, Annelies; Botteldooren, Dick; Vinck, Bart
Vibration of concrete hollow core elements induced by human walking
pp. 819-827(9)
Authors:
Bard, Delphine; Johanssom, Pia; Persson, Kent; Thelandersson, Sven
Evaluation of hearing protectors with high level impulse noise using explosive charges
pp. 828-835(8)
Authors:
Buck, Karl; DeMezzo, Sebastien; Zimpfer, Véronique
The propagated uncertainty of EN12354-1 for lightweight building constructions
pp. 836-843(8)
Authors:
Mahn, Jeffrey; Pearse, John
In situ determination of transformer sound power levels - Part 2: Results
pp. 844-853(10)
Authors:
Gosselin, Blaise; Duchassin, Franck; Chamberland, Claude
In situ determination of transformer sound power levels - Part 1: Methods
pp. 854-860(7)
Authors:
Duchassin, Franck; Gosselin, Blaise; Chamberland, Claude
A comparison of two and four microphone standing wave tube procedures for estimating the normal incidence absorption coefficient
pp. 861-869(9)
Authors:
Kunio, Jason; Yoo, Taewook; Bolton, J. Stuart; Hou, Kang; Enok, Jan
On soundscapical correctness: An acoustic design policy for public spaces
pp. 879-886(8)
Author:
Nagahata, Koji
Prediction of vocal effort and speakers comfort in lecture rooms
pp. 887-895(9)
Authors:
Pelegrín-García, David; Brunskog, Jonas
Achieving speech privacy with reasonable sound insulation and masking background noise
pp. 896-902(7)
Authors:
Keränen, Jukka; Hongisto, Valtteri
In duct measurements: Experiences and improvements
pp. 903-908(6)
Authors:
Scholz, Ulrich; Klockar, Christine; Prette, Marco
Dynamic noise modeling at roundabouts
pp. 909-915(7)
Authors:
Lelong, Joel; Chevalier, Estelle; Leclercq, Ludovic; Chatagnon, Roger
New vehicle noise emission for French traffic noise prediction
pp. 916-924(9)
Authors:
Lelong, Joel; Le Duc, Emmanuel; Doisy, Sonia
Prediction of the insertion loss of large enclosures using a combined SEA/image sources approach
pp. 925-933(9)
Authors:
Sgard, Franck; Nelisse, Hugues; Atalla, Noureddine; Amedin, Celse Kafui; Oddo, Remy
Subjective evaluation of tonalness and relation between tonalness and unpleasantness
pp. 934-941(8)
Authors:
Parizet, Etienne; Bolmont, Armand; Fingerhuth, Sebastian
Using SPMSoft to assess privacy in open-plan offices
pp. 942-950(9)
Author:
Bradley, John
Comparisons of in-situ sound measurements using the sound pressure and sound intensity methods
pp. 951-958(8)
Author:
Li, Weidong
Evaluation of a hard walled room for reverberant power measurements: What is "good enough"?
pp. 959-967(9)
Authors:
Conlon, Stephen; Hambric, Stephen
Hydraulic excavator noise control case study as part of a comprehensive mitigation plan of an integrated open-pit coalmine and powerplant
pp. 968-974(7)
Authors:
Faszer, Andrew; Faszer, Clifford; MacDonald, Roderick; Faszer, Matthew
Noise management plans for leisure noise?
pp. 975-980(6)
Authors:
Burgess, Marion; Williams, Warwick
Self-assessment of hearing status and risk of noise-induced hearing loss in workers from rolling stock plant
pp. 981-989(9)
Authors:
Pawlaczyk-Luszczynska, Malgorzata; Dudarewicz, Adam; Zamojska, Malgorzata; Sliwinska-Kowalska, Mariola
The environmental sound evaluation by using a complexity of wave shape
pp. 990-998(9)
Authors:
Makabe, Yoshiaki; Shibayama, Hideo
Case studies on auralization of transfer paths
pp. 999-1004(6)
Author:
Vorlaender, Michael
Noise exposure from communications headsets: The effects of external noise, device attenuation and effective listening signal-to-noise ratio
pp. 1005-1012(8)
Authors:
Giguère, Christian; Dajani, Hilmi R.
A predictive model of speech intelligibility in noise for normal and hearing-impaired listeners wearing hearing protectors
pp. 1013-1021(9)
Authors:
Giguere, Christian; Laroche, Chantal; Vaillancourt, Veronique; Soli, Sigfrid S.
Road traffic noise prediction model "ASJ RTN-Model 2008" proposed by the Acoustical Society of Japan - Part 1: The framework and the flow of calculation
pp. 1022-1027(6)
Author:
Yamamoto, Kohei
The influence of propagation surface for interior source localization
pp. 1028-1035(8)
Authors:
Deblauwe, Filip; Janssens, Karl; Shirk, Noah
Sound intensity on an absorber in reverberant conditions
pp. 1036-1041(6)
Author:
Jeong, Cheol-Ho
Emission, propagation and control of road traffic moise: Some solutions for the future
pp. 1042-1050(9)
Author:
Berengier, Michel
Experiences in noise control education in architecture
pp. 1051-1060(10)
Authors:
Yuksel Can, Zerhan; Maffei, Luigi; Semidor, Catherine; Kang, Jian
Measurement methodology and survey of noise exposure in call centres using headphones
pp. 1061-1069(9)
Authors:
Trompette, Nicolas; Chatillon, Jacques
Field versus laboratory sound insulation of windows
pp. 1070-1077(8)
Authors:
Olafsen, Sigmund; Strand, Maria Kristin
Analyses of The Directive 2002/49/EC and proposals for improvement
pp. 1078-1081(4)
Author:
Lechner, Christoph
Sound level meters calibration in simulated free-field
pp. 1082-1087(6)
Author:
Soares, Zemar
Distributed system for extended field measurements of sonic booms
pp. 1088-1094(7)
Author:
Veggeberg, Kurt
Noise measurement system meets new ISO standards in pass by noise with unique global positioning and triggering capabilities.
pp. 1095-1102(8)
Author:
Copeland, Timothy
Speech estimation using body-conducted speech microphone in noisy environment
pp. 1103-1107(5)
Authors:
Nakayama, Masashi; Ishimitsu, Shunsuke; Nakagawa, Seiji
An experimental procedure to minimize traffic noise inside bus stations: A case study in Brazil
pp. 1108-1114(7)
Authors:
Rodrigues, Frederico; Franco, Luiza; Alberto Faria, Carlos
Composite fuselage characteristics and additional considerations for noise control treatments
pp. 1115-1122(8)
Authors:
Gries, David; Sheth, Hemang
Subjective impression of copy machine noises: An improvement of their sound quality based on physical metrics
pp. 1123-1131(9)
Authors:
Takehira, Osamu; Kuwano, Sonoko; Namba, Seiichiro; Fastl, Hugo
Predicting noise reduction by electrification of automobiles
pp. 1132-1137(6)
Authors:
Yoshinaga, Hiroshi; Namikawa, Yoshiharu
Visualization of sound energy flows across coupled-volume systems
pp. 1138-1145(8)
Authors:
Jing, Yun; Xiang, Ning
Social survey on community response to aircraft noise in Ho Chi Minh city
pp. 1146-1154(9)
Authors:
Yano, Takashi; Nguyen, Thu Lan; Nishimura, Tsuyoshi; Sato, Tetsumi
Noise from rooftop mechanical systems in residential buildings
pp. 1155-1160(6)
Author:
Nash, Anthony
Design of light weight constructions - risks and opportunities
pp. 1161-1169(9)
Authors:
Hagberg, Klas; Persson, Tommy; Hook, Matilda
Sound absorption characteristics of a honeycomb-backed microperforated panel absorber: Revised theory and experimental validation
pp. 1170-1177(8)
Authors:
Sakagami, Kimihiro; Yamashita, Ippei; Yairi, Motoki; Morimoto, Masayuki
Measurement of tyre/road surface noise with close-proximity method in Hong Kong
pp. 1178-1187(10)
Authors:
Ng, Wai Kwong; Ng, Ping Sum; Hung, Wing Tat
Simple method for predicting noise in the vicinity of signalized intersections
pp. 1188-1196(9)
Authors:
Namikawa, Yoshiharu; Yoshinaga, Hiroshi; Tajika, Terutoshi; Oshino, Yasuo; Yoshihisa, Koichi; Yamamoto, Kohei
Optimization of the acoustic performances of lightweight sandwich roof elements
pp. 1197-1205(9)
Authors:
Dijckmans, Arne; Vermeir, Gerrit; Niggebrugge, Jan Willem
Analysis of annoying low frequency noise boilers rooms
pp. 1206-1214(9)
Author:
Ziaran, Stanislav
Noise exposure of engine drivers to noise - New challenges resulting from the EU Noise Directive
pp. 1215-1220(6)
Authors:
Paulsen, Reimer; Dantscher, Sandra
A new look at acoustical criteria for classrooms
pp. 1221-1229(9)
Author:
Bradley, John
Establishing relationships between acoustic and physical properties of shoddy-based fibre absorbers
pp. 1230-1235(6)
Authors:
Manning, John; Panneton, Raymond
Random incidence absorption from oblique absorption measurement
pp. 1236-1244(9)
Author:
Gagliardi, John
Speech privacy: The 2009-10 LEED, AIA and ASHE criteria for healthcare facilities
pp. 1245-1248(4)
Author:
Sykes, David
Validation of a novel TPA method for test-based NVH troubleshooting
pp. 1249-1258(10)
Authors:
Janssens, Karl; Gajdatsy, Peter; Tamarozzi, Tommaso; Rubio, Gustavo; Britte, Laurent; Van der Auweraer, Herman; Shirk, Noah; Stoica, Mihai
Structureborne noise control of oscillating pumps
pp. 1259-1267(9)
Authors:
Zmijevski, Thiago; Weisbeck, Jeff; Sanetick, Robert
Resonance of nanofibrous thin membranes depending on their sequence
pp. 1268-1275(8)
Author:
Kalinova, Klara
Passive reduction of noise in an automotive compartment: Effect of engine bay and partitions
pp. 1276-1284(9)
Author:
Kruntcheva, Mariana
On the possible role of short-range shock formation and coalescence in jet aeroacoustic source characterization
pp. 1285-1291(7)
Authors:
Shepherd, Micah R.; Gee, Kent L.
High frequency noise generation by impinging jets
pp. 1292-1299(8)
Authors:
Ramakrishnan, Ramani; Raimondo, Sergio; Grewal, Anant; Elfstrom, Gary
Optimum configuration of intake duct system integrating porous duct for pleasant interior noise
pp. 1300-1308(9)
Authors:
Tsuchida, Takashi; Aritake, Yoshiki; Kitahara, Senji; Takao, Hideo; Hatano, Shigeko; Shin, Sung-Hwan; Hashimoto, Takeo
Reduction of sound radiation using extended radiation modes
pp. 1309-1314(6)
Authors:
Yamaguchi, Zenzo; Bolton, J. Stuart
The setting up and uncertainty evaluation of vibration accelerometer calibration system by comparison method
pp. 1315-1323(9)
Authors:
Huang, Yeu-Jong; Chen, Chao-Jung; Wang, Sheng-Hang; Chen, Jiun-Kai
Autoregressive spectrum analysis of cylinder head vibration and marine diesel engine condition monitoring
pp. 1324-1331(8)
Author:
Zhu, Jianyuan
Looking at spech privacy in buildings: a few considerations
pp. 1332-1337(6)
Authors:
Asselineau, Marc; Serra, Maud; Gaulupeau, Aline
Noise source ranking of an all-terrain vehicle to meet pass-by target
pp. 1338-1346(9)
Authors:
Lu, Ming-Hung; Jen, Ming Une
Evaluation of noise emission of in-service vehicles
pp. 1347-1352(6)
Authors:
Au, Hom; Cheng, Kin Wui; Yeung, Maurice
An algorithm to adjust the clarity of room impulse responses for subjective tests
pp. 1353-1361(9)
Authors:
Huszty, Csaba; Augusztinovicz, Fulop; Sakamoto, Shinichi
LDA investigation of the acoustic field above a perforated liner with grazing and bias flow
pp. 1362-1370(9)
Authors:
Piot, Estelle; Micheli, Francis; Simon, Frank
Optimization of multiple-layer microperforated panels by simulated annealing
pp. 1371-1378(8)
Authors:
Ruiz, Heidi; Cobo, Pedro; Siguero, Manuel
Auxiliary equipments: How they can affect hall's acoustical quality
pp. 1379-1384(6)
Authors:
Cocchi, Alessandro; Semprini, Giovanni
An improved method for flexibly creating a localized sound field reproduction zone
pp. 1385-1390(6)
Authors:
Tanaka, Kazuyo; Hashimoto, Yasuharu; Mikawa, Masahiko
Hand-arm vibration levels caused by pneumatic wrenches and pneumatic/electric knives, ways of limiting DC-Shift
pp. 1391-1400(10)
Authors:
Duee, Raphaël; Chavallard, Jean-Yves
Thermo-acoustic properties of floors made of concrete and scraps from electric wires
pp. 1401-1408(8)
Authors:
Asdrubali, Francesco; D'Alessandro, Francesco; Baldinelli, Giorgio
Computational model for long-range nonlinear propagation over urban cities
pp. 1409-1417(9)
Authors:
Leissing, Thomas; Soize, Christian; Jean, Philippe; Defrance, Jérôme
Design of quarter wave tube for engine intake noise attenuation by finite element analysis
pp. 1418-1425(8)
Authors:
Elwali, Wael; Caliskan, Mehmet; Koyuncu, Atayil; Yilmaz, Ilker
Measurement of effective hearing protection device attenuation during a workshift in industrial plants
pp. 1426-1434(9)
Authors:
Nelisse, Hugues; Gaudreau, Marc-Andre; Laville, Frederic; Boutin, Jerome; Voix, Jeremie
Standards for calculating loudness of stationary or time-varying sounds
pp. 1435-1440(6)
Authors:
Fastl, Hugo; Voelk, Florian; Straubinger, Martin
Design and testing of an active constrained layer damping demonstrator for aircraft's cabin noise reduction
pp. 1441-1450(10)
Authors:
Vigliotti, Andrea; Sorrentino, Assunta
Achieving acoustical code requirements in lightweight multi-family dwellings
pp. 1451-1458(8)
Author:
Babich, Jeffrey
Application of the tranquillity rating prediction tool
pp. 1459-1467(9)
Authors:
Watts, Greg; Pheasant, Rob; Horoshenkov, Kirill
Vocal effort level distribution in speech intelligibility and privacy assessment - The knowledgebase and necessary further work
pp. 1468-1476(9)
Author:
Li, Francis F.
Assessment and measurement of occupational noise exposure - A three-step approach
pp. 1477-1482(6)
Authors:
Thiery, Léon; Jacques, Jean
Minimizing the sound radiated by a cylindrical shell
pp. 1483-1490(8)
Authors:
Shepherd, Micah R.; Hambric, Stephen A.
Laboratory studies on sonic crystal noise barriers
pp. 1491-1496(6)
Authors:
Chong, Alvin Yung Boon; Taherzadeh, Shahram; Attenborough, Keith
Architectural and acoustic design for speech privacy
pp. 1497-1501(5)
Author:
Roy, Kenneth P.
Acoustics of elementary school classrooms: Correlations of varying background noise level and reverberation time to student achievement
pp. 1502-1506(5)
Authors:
Ronsse, Lauren M.; Wang, Lily M.
Calculation using box counting method for Fractal dimension in an AC electric motor vibration
pp. 1507-1512(6)
Authors:
Naoe, Nobuyuki; Imazawa, Akio; Matsumoto, Norihisa; Minamide, Akiyuki
Research on the acceptability evaluation of sounds to warn the approach of an electric vehicle
pp. 1513-1521(9)
Authors:
Sekine, Michiaki; Tanaka, Takeharu; Sakamoto, Ichiro; Morita, Kazumoto
Effects of acoustic properties of vehicle horn on auditory impression and estimation of the aim of another driver's horn usage
pp. 1522-1530(9)
Authors:
Takada, Masayuki; Takeno, Ayako; Iwamiya, Shin-ichiro
Methodology for acoustic design education in Kyushu University
pp. 1531-1536(6)
Authors:
Omoto, Akira; Samejima, Toshiya
Wideband sound absorber obtained by combination of two microperforated panel absorbers with different air-cavity depths arranged in parallel
pp. 1537-1543(7)
Authors:
Yairi, Motoki; Takebayashi, Kenichi; Sakagami, Kimihiro; Morimoto, Masayuki
Prediction of the acoustic performance of floor coverings on lightweight floors
pp. 1544-1552(9)
Authors:
Guigou-Carter, Catherine; Foret, Remy; Chene, Jean-Baptiste; Villot, Michel
Numerical optimisation of liners for the aero-engine intake of a supersonic aircraft
pp. 1553-1560(8)
Authors:
Malbéqui, Patrice; Bourrat, Luc
Measurement of subwoofer directivity in non-anechoic rooms
pp. 1561-1568(8)
Authors:
Langrenne, Christophe; Chartrain, Pierre-Emile; Melon, Manuel; Garcia, Alexandre
Practical aspects of QA in noise mapping
pp. 1569-1574(6)
Authors:
Krapf, Klaus-Georg; Wetzel, Edgar
- Access Key
- Free content
- Partial Free content
- New content
- Open access content
- Partial Open access content
- Subscribed content
- Partial Subscribed content
- Free trial content