INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Comparison of various techniques for computing modal mass
pp. 1-9(9)
Authors: Goss, Adam; Hambric, Stephen; Fahnline, John

New York City's new and improved construction noise regulation
pp. 10-19(10)
Authors: Thalheimer, Erich; Shamoon, Charles

Noise mitigation measures at large-scale construction sites
pp. 20-27(8)
Authors: Wu, Weixiong; Keller, Kevin J.

Burn acute care unit acoustical design for enhanced patient comfort
pp. 28-36(9)
Author: Pelton, Howard K.

Transmission loss of different configurations of a refrigerant muffler using FEM approach
pp. 37-42(6)
Authors: Mathuria, Parag H.; Mezache, Macinissa

Interior noise study of an aluminum fuselage aircraft using Statistical Energy Analysis
pp. 43-53(11)
Authors: Dandaroy, Indranil; Bhuiyan, Mohammed Taj

Reducing low frequency boiler stack noise in the community
pp. 54-59(6)
Author: Hessler, George F.

Damping characteristics of honeycomb sandwich panels filled with loose particulate materials
pp. 60-71(12)
Author: Liguore, Salvatore

Noise impact assessment for an air tanker loading operations
pp. 72-76(5)
Author: Buntin, Jim

Technologically achievable engineering and administrative noise controls for the mining industry
pp. 77-82(6)
Authors: Seiler, John P.; Pon, Melinda

A dual sprocket chain as a noise control for a continuous mining machine
pp. 83-91(9)
Authors: Kovalchik, Peter G.; Smith, Adam K.; Matetic, Rudy J.; Alcorn, Lynn A.

Possibility for errors in tone-to-noise ratio calculation arising out of insufficient FFT resolution
pp. 92-97(6)
Author: Upton, Roger

Conformal mapping techniques for consumer products
pp. 98-106(9)
Authors: Upton, Roger; Haddad, Karim; Sorensen, Jes

Floor and ceilings and noise control
pp. 107-114(8)
Author: Keene, James R.

Factors influencing sound power measurement reproducibility
pp. 115-122(8)
Authors: Marque, Jeffrey J.; Ashour, Osama

Impact sound transmission through floor/ceiling assemblies in lightweight wood frame construction
pp. 123-131(9)
Authors: Hesedahl, Jeanette L.; Bruck, Daniel C.

Active steering control system of a rail vehicle based on the analysis of the sound radiation
pp. 132-141(10)
Authors: Spiryagin, Maksym; Lee, Kwan Soo; Yoo, Hong Hee; Spiryagin, Valentyn; Vivdenko, Yuriy

Measured vibration response characteristics of building elements subjected to impulsive noise
pp. 142-149(8)
Authors: Sizov, Natalia V.; Gurovich, Yuriy A.; Plotkin, Kenneth J.

Application of a microphone phased array to identify noise sources on a roof bolting machine
pp. 150-161(12)
Authors: Yantek, David S.; Peterson, J. Shawn; Smith, Adam K.

Construction noise impact assessment for the Atlantic Yards Arena Project
pp. 162-173(12)
Authors: Rosen, Stephen S.; Sachwald, Benjamin H.

Investigation and study on the measurements of sound power level for business machines using different multi-channel microphone systems
pp. 174-178(5)
Author: Takanashi, Akio

Investigating the implementation of pavement effects via OBSI data in the FHWA Traffic Noise Model (FHWA TNM)
pp. 179-185(7)
Authors: Rochat, Judith; Hastings, Aaron; Ferroni, Mark

Two-stage isolation system for high-frequency vibration attenuation
pp. 186-194(9)
Author: Downing, Marshall

A comparison of the acoustic requirements in LEED for schools and ANSI 12.60
pp. 195-204(10)
Author: Muehleisen, Ralph T.

On-board sound intensity testing of PFC pavements in Texas
pp. 205-216(12)
Authors: Trevino, Manuel; Dossey, Terry

Headsets in the light aircraft cockpit: speech intelligibility, PELs, and flight performance
pp. 217-229(13)
Authors: Casali, John G.; Valimont, R. Brian; Lancaster, Jeff A.; Gauger, Dan

Comparison of on-plenum to in-system blower noise
pp. 230-240(11)
Author: Baugh, Eric

Constant sound power fan curves for small blowers
pp. 241-249(9)
Authors: Baugh, Eric; MacDonald, Mark

Fan optimization for mobile system installed conditions
pp. 250-258(9)
Author: Baugh, Eric

Flow resistivity effect on sound absorption and sound transmission loss of film-faced foam
pp. 259-268(10)
Author: Kim, Jeongwoo

Atmospheric affects on long range sound propagation
pp. 269-273(5)
Author: Bronsdon, Robert L.

A general periodic subsystem for SEA
pp. 274-285(12)
Authors: Cotoni, Vincent; Gardner, Bryce; Shorter, Phil; Langley, Robin

Modeling methods for vibro-acoustic analysis of commercial aircrafts
pp. 286-297(12)
Authors: Cotoni, Vincent; Gardner, Bryce; Carneal, James; Fuller, Chris

ANIMATED Auditory Demonstrations II: a NASA educational resource for demonstrating acoustical parameters by coupling auditory experiences with sequences of visual cues
pp. 298-310(13)
Author: Cooper, Beth A.

Vibration damper on engine cover noise control
pp. 311-316(6)
Author: Liang, Paul N.

Statistical analysis of the humidity and temperature effects in a large reverberation room
pp. 317-322(6)
Author: Liang, Paul N.

Noise control for neonatal ICU for demolition and construction within hospital facilities
pp. 323-334(12)
Author: Evans, Jack B.

Verifying community noise compliance with direct measurements - What community noise limits mean
pp. 335-343(9)
Author: Putnam, Robert A.

2-D FEA modeling to assess railroad track support modification for reducing wayside ground vibration
pp. 344-352(9)
Author: Phillips, James E.

Analysis and control of automated people mover vibration in buildings
pp. 353-363(11)
Author: Phillips, James E.

Symphony towers noise compliance analysis; City of Fort Lauderdale, Florida
pp. 364-367(4)
Author: Kinney Jr, Bernard I.

The search for more meaningful aircraft noise analysis in support of more effective airport planning
pp. 368-377(10)
Author: Connor, Thomas L.

A laboratory assessment of noise annoyance due to low-frequency aircraft noise
pp. 378-389(12)
Authors: Nickerson, Matthew; Hodgdon, Kathleen; Gabrielson, Thomas; Atchley, Anthony

Identification of transient events from a hard disk drive using non-stationary loudness
pp. 390-398(9)
Author: Ali, Dave

Road, chassis, powertrain and wind contributions to in-vehicle vibration and noise
pp. 399-410(12)
Authors: Sorenson, Steven R.; Lock, Aaron M.

Assessing the relative noise contributions from independent time-varying sources
pp. 411-417(7)
Authors: Freytag, John C.; Schomer, Paul D.

Source location using an array of ground vibration sensors
pp. 418-423(6)
Authors: Zapfe, Jeffrey A.; Lyon, Richard H.

Using ISO 8297 to verify community noise requirements given as limits on sound power levels
pp. 424-436(13)
Author: Brittain, Frank H.

Results of noise measurements from underground testing of a roof bolting machine duty cycle.
pp. 437-446(10)
Authors: Peterson, Jeffrey Shawn; Alcorn, Lynn

Strategies for reducing grade crossing noise
pp. 447-453(7)
Authors: Saurenmann, Hugh; Dennis, Zack; Jaworski, Christina

Case studies illustrating the importance of de-coupling the mass layers of demising walls in multi-family luxury condominums and townhomes
pp. 454-465(12)
Authors: Lilkendey, Robert M.; Siebein, Gary W.

Noise ordinance design: Mapping by land use
pp. 466-475(10)
Authors: Rand, Robert W.; Ambrose, Stephen A.; Segalla, Caroline

Evaluation of close-proximity methods for tire/pavement noise measurements
pp. 476-482(7)
Author: Ruhala, Richard

Soundscape evaluations in adult intensive care units
pp. 483-488(6)
Authors: Ryherd, Erica; Persson Waye, Kerstin

Estimation of upper bounds to stresses induced by sound
pp. 489-493(5)
Author: Ungar, Eric E.

Server system acoustic optimization through fan speed control modeling and sensitivity study
pp. 494-499(6)
Author: Man, Kaleen XiuTing C.

Modeling of adaptively tunable flow driven resonators for axial fan blade tone noise attenuation
pp. 500-511(12)
Authors: Gorny, Lee J.; Koopmann, Gary L.; Neise, Wolfgang; Lemke, Olaf

Roughness tacile vibration and drone noise caused by driveline
pp. 512-517(6)
Authors: Woo, Jaehak; Davis, Patrick

What dreadful noise of water in mine ears
pp. 518-526(9)
Author: Wetherill, Ewart A.

Active control of periodic fan noise in laptops
pp. 527-538(12)
Authors: Orduna Bustamante, Felipe; Cordourier Maruri, Hector Alfonso; de la Guardia Gonzalez, Rafael

Influence of laptop fan noise on speech intelligibility in small meeting rooms and classrooms
pp. 539-550(12)
Authors: Orduna Bustamante, Felipe; Padilla Ortiz, Ana Laura; de la Guardia Gonzalez, Rafael; Cordova Magana, Jose A.

Active structural acoustic control for a truck oil pan: Actuator placement and efficiency estimation
pp. 551-562(12)
Author: Heintze, Olaf

One person's 'entertainment'......
pp. 563-572(10)
Author: Brown, Michael J.

A study of impact insulation characteristics in one 'adaptive' reuse condomimium project
pp. 573-584(12)
Authors: Wiebusch, Julie A.; Bogomolov, Elizabeth

Source design considerations for qualifying hemi-anechoic chamber in compliance with ISO 3745
pp. 585-595(11)
Authors: Winker, Douglas; Chadha, Ankit; Ristroph, Einar

Effect of source directionality on deviations from inverse square law in a hemi-anechoic chamber typically used for product noise emission testing
pp. 596-606(11)
Authors: Chadha, Ankit; Ristroph, Einar; Winker, Douglas F.

Elevated sources under hemispherical arrays for product noise testing in hemi-anechoic chambers
pp. 607-615(9)
Authors: Ristroph, Einar G.; Chadha, Ankit; Winker, Douglas F.

Vibration transmission and damping at railway lines and noise emission
pp. 616-624(9)
Author: Beke, Peter

48-hour patient room noise level survey at regional medical center
pp. 625-633(9)
Author: Sevener, Nathan Bryce

A new experimental device for measuring sonic boom transmission into buildings
pp. 634-642(9)
Authors: Naka, Yusuke; Makino, Yoshikazu

Finding root cause and solution to the PC cooling fan noise problems
pp. 643-650(8)
Authors: Lin, Shu-Ho (Brian); Pei, Hsien-Sheng (Jason)

Maryland's transition to county-level regulation of community noise
pp. 651-655(5)
Author: Luz, George

Tram wheel vibrations dependence on the rail surface geometry in weld zone
pp. 656-667(12)
Authors: Lakusic, Stjepan; Bogut, Marijan

The story of the environmental noise impact assessment in Hungary
pp. 668-679(12)
Author: Beke, Peter

Is the CEN-calculation model suitable for North American building structures?
pp. 680-686(7)
Authors: Metzen, Heinrich A.; Shade, Neil Thompson

Viscoelastic damping for noise control in an armored military vehicle
pp. 687-693(7)
Authors: Glaese, Roger; Baumgartner, Rolf; Sievers, Ryan

DOT partnerships with local governments to prevent adverse effects from highway noise
pp. 694-702(9)
Authors: Wyckoff, Mark A.; Avery, Kenneth R.

Transmission of low-frequency sound through building structures
pp. 703-713(11)
Authors: Yu, Z.; Li, K. M.

Using on-board sound intensity within the concrete pavement surface characteristics program
pp. 714-725(12)
Authors: Rasmussen, Robert O.; Mun, Eric P.; Turner, Dennis J.; Whirledge, Robert P.; Ferragut, Ted. R.; Wiegand, Paul D.

Tire-pavement and traffic noise research in the state of Colorado
pp. 726-737(12)
Authors: Rasmussen, Robert O.; Mun, Eric P.; DeDios, Roberto E.

Problems in predicting noise levels on launch vehicles at liftoff
pp. 738-748(11)
Author: Wilby, John F.

Application of the Fast Multipole Method (FMM) for acoustic analysis
pp. 749-758(10)
Authors: Gunda, Rajendra; Vijayakar, Sandeep M.

The acoustic amplification of system enclosures using elementary noise sources
pp. 759-769(11)
Authors: Beltman, Willem M.; de la Guardia, Rafael; Cordova, Jose

Fan selection and installation issues related to spaceflight hardware
pp. 770-776(7)
Author: Nelson, David A.

Optimization of control source location in a free-field active noise control application using a genetic algorithm
pp. 777-784(8)
Authors: Duke, Connor R.; Sommerfeldt, Scott D.; Gee, Kent L.; Duke, Cole V.

Determining spatial variation of prominent discrete tones
pp. 785-791(7)
Authors: Rafaelof, Menachem; Sesselmann, Roland

Communicating the noise effects of wind farms to stakeholders
pp. 792-801(10)
Author: Bajdek, Christopher J.

Reduction of traffic and tire/pavement noise: 3rd year results of the Arizona quiet pavement program - site III
pp. 802-808(7)
Author: Reyff, James A.

Use of correlation between received impulsive noise event times
pp. 809-815(7)
Authors: Nykaza, Edward T.; Donaldson, Nicholas P.

Methods to eliminate continuous and variable background noise sources
pp. 816-826(11)
Author: Parzych, David

Considering the risk to hearing from listening to music on earphones from IT equipment
pp. 827-836(10)
Authors: Dunens, Egons; Hellweg, Jr., Robert D.

REMEL database developed for different PCC pavement surfaces
pp. 837-847(11)
Author: Reyff, James A.

Noise reduction study of sandwich plates using the state space method
pp. 848-856(9)
Authors: Huang, Changzheng; Nutt, Steve

Proven engineered acoustical plumbing solutions
pp. 857-865(9)
Author: O'Neil, Chip

Designing a simulation center to test acoustical criteria for healthcare facilities
pp. 866-876(11)
Authors: Carballeira, Andrew; Solet, Jo; Buxton, Orfeu; Sykes, David

Community noise verification measurements for a highway in a suburban environment
pp. 877-888(12)
Authors: Chambers, James P.; Saurenman, Hugh; Bronsdon, Robert; Sutherland, Louis; Waxler, Roger; Gilbert, Ken; Talmadge, Carrick

Experimental study and model verification of noise control with gas layers
pp. 889-895(7)
Authors: Naify, Christina J.; Huang, Changzheng; Rajaram, Shankar; Sneddon, Matthew; Nutt, Steve

Low-frequency source characterization of aircraft noise during landing operations
pp. 896-905(10)
Authors: Dunkin, Bradley M.; Atchley, Anthony A.; Hodgdon, Kathleen K.

Loss factors of honeycomb sandwich structures: An experimental approach
pp. 906-914(9)
Authors: Peters, Portia; Nutt, Steven; Sneddon, Matthew

Recommended standards for the acoustic environment of the newborn ICU
pp. 915-920(6)
Authors: Philbin, M.Kathleen; White, Robert D.

Evaluation of OBSI for measuring tire-pavement noise
pp. 921-932(12)
Authors: de Fortier Smit, Andre; Waller, Brian

Green noise reduction: Sustainable sound control
pp. 933-937(5)
Author: Clunan, James

Evaluation of time-varying loudness for quantifying perception of nonlinearly propagated noise
pp. 938-945(8)
Authors: Swift, S. Hales; Gee, Kent L.

Product sound quality and sleep disturbance
pp. 946-953(8)
Authors: Cerrato Jay, Gabriella; Frenz, Eric C.; Fremz, Eric R.

Passive control of sound transmission through a double panel using heterogeneous (HG) blankets, Part I: Modeling and verification
pp. 954-965(12)
Authors: Idrisi, Kamal; Johnson, Marty; Carneal, James P.

Passive control of sound transmission through a double panel using heterogeneous (HG) blankets, Part II: HG parametric studies
pp. 966-977(12)
Authors: Idrisi, Kamal; Johnson, Marty; Carneal, James P.; Kidner, Mike R.

Passive control of sound transmission through a double panel using heterogeneous (HG) blankets, Part III: HG design strategies
pp. 978-989(12)
Authors: Idrisi, Kamal; Johnson, Marty; Carneal, James P.

Microphysical influences on sound wave and laser light propagation in forested areas
pp. 990-1001(12)
Authors: Tunick, Arnold; Swearingen, Michelle E.

Wave based analysis of distributed vibration absorbers: Experimental validation
pp. 1002-1013(12)
Authors: Johnson, Marty; Berry, Irene

Noise reduction in hospitals: A case study
pp. 1014-1020(7)
Authors: West, James E.; Busch-Vishniac, Ilene J.; Dunn, Jeffery; MacLeod, Mark; Johnson, Ana

Noise management and control in the Caribbean region, the Puerto Rico's perspectives
pp. 1021-1033(13)
Author: Alicea-Pou, Jose

Noise emissions from excited jets
pp. 1034-1045(12)
Author: Marzouk, Osama

A new indirect formulation to address the non-uniqueness problem in acoustic BEM
pp. 1046-1055(10)
Authors: Ambarisha, Vijaya Kumar; Gunda, Rajendra; Vijayakar, Sandeep M.

Investigation of Strouhal number effect on acoustic fields
pp. 1056-1067(12)
Author: Marzouk, Osama

A story of acceptability of user triggered noise in small electroacoustical devices
pp. 1068-1077(10)
Authors: Green, Matthew J.; Burns, Thomas; Tourtelotte, Dave

Effect of convection velocity of launch vehicle vibration response
pp. 1078-1088(11)
Author: Blelloch, Paul

Optimal near-field error sensor locations for active control of fan noise using multipole expansions
pp. 1089-1096(8)
Authors: Shafer, Benjamin M.; Gee, Kent L.; Sommerfeldt, Scott D.

The application of sound intensity to the evaluation of pavement for tire/road noise performance - The OBSI approach
pp. 1097-1107(11)
Authors: Donavan, Paul R.; Rymer, Bruce

Considerations in the standardization of On-Board Sound Intensity (OBSI) for highway pavement evaluation
pp. 1108-1118(11)
Authors: Donavan, Paul; Lodico, Dana M.; Rymer, Bruce

Effect of finite atmospheric sampling on predictive skill for broadband sound-exposure levels
pp. 1119-1130(12)
Authors: Wilson, D. Keith; Lewis, Matthew S.

Weather effects on outdoor noise exposure: Where, when, and how often to measure?
pp. 1131-1142(12)
Author: Wilson, D. Keith

Feasibility of using a database of noise surveys to validate proposed environmental noise metrics
pp. 1143-1152(10)
Authors: McGuire, Sarah; Davies, Patricia

Carbon nanotube damping for composite aerospace structures: A new paradigm
pp. 1153-1160(8)
Authors: Suhr, Jonghwan; Mathur, Gopal P.; Ajayan, Pulickel M.

Plumbing noise: Sound pressure levels and human perception in a luxury condominium
pp. 1161-1166(6)
Author: Watry, Derek L.

The effect of buildings on ground vibration propagation
pp. 1167-1178(12)
Authors: Xiong, Blong; Amick, Hal; Gendreau, Michael

Prediction of diesel engine cooling fan noise
pp. 1179-1186(8)
Authors: Kim, Geon-Seok; Lauchle, Gerald C.; Brungart, Timothy A.

Verifying community noise limits have been satisfied using extrapolation of measured data
pp. 1187-1193(7)
Authors: Greene, Rob; Limberg, Grant

Mitigation of gun blast noise by surface impedance design
pp. 1194-1201(8)
Authors: Tong, Mei Song; Chew, Weng Cho; White, Michael J.

On the use of statistics of a time-varying loudness model to quantify loudness of transient environmental noise
pp. 1202-1208(7)
Authors: Marshall, Andrew; Davies, Patricia

Effect of lagging material on duct breakout noise
pp. 1209-1212(4)
Authors: Golden, Matthew; Paige, Thomas

Acquisition and disposal of airport noise land
pp. 1213-1216(4)
Authors: Garcia, Tony; Roberts, Dennis E.; Bennett, David L.; Williams, Nancy W.

Demonstrating that community noise limits have been met using modeling
pp. 1217-1227(11)
Author: Hale, Marlund E.

Generator set tones in offices: A tale of two buildings
pp. 1228-1235(8)
Authors: Kato, Daniel; Seidlitz, Steve; Cheah, Sze Kwan

The effect of structural loss factor on the calculation of pipe wall transmission loss
pp. 1236-1243(8)
Authors: Eilers, Daniel; Catron, Fred

Cooling requirements, chassis design and fan noise
pp. 1244-1247(4)
Author: Nelson, David A.

Land use planning guidelines for new airports in Canada
pp. 1248-1255(8)
Author: Lowrey, Tom F.

Low frequency sound transmission of high-performance residential windows
pp. 1256-1265(10)
Authors: Robinson, Daniel H.; Bernhard, Robert J.; Mongeau, Luc G.

An examination of the influence of roughness on ratings of aircraft noise
pp. 1266-1272(7)
Authors: More, Shashikant; Davies, Patricia

Designed silence with Sylomer/Sylodyn - polyurethan - materials
pp. 1273-1280(8)
Author: Stofleth, Andreas

Sonic contamination in Santo Domingo
pp. 1281-1286(6)
Author: Solano, Ana T.

A Fourier method for the vibration analysis of colinearly coupled beams systems
pp. 1287-1296(10)
Authors: Li, Wen L.; Xu, Hongan

A new energy approach to the analysis of complex and uncertain systems
pp. 1297-1307(11)
Authors: Magionesi, Francesca; Carcaterra, Antonio

Improved gear whine model with focus on friction-induced structural-borne noise
pp. 1308-1319(12)
Authors: He, Song; Singh, Rajendra; Pavic, Goran

Acoustical banners
pp. 1320-1323(4)
Author: Splain, Charles W.

Behavior of psychoacoustic measurements with time-varying signals
pp. 1324-1337(14)
Author: Bray, Wade R.

Measurement and sound quality issues concerning low-frequency noise
pp. 1338-1351(14)
Author: Bray, Wade R.

Composite saw blade technology
pp. 1352-1363(12)
Authors: Homer, John; Marraccini, Leonard

Experimental determination of far field sound power field due to panel and vent radiation on a portable diesel generator
pp. 1364-1370(7)
Authors: Sagers, Jason; Blotter, Jonathan; Sommerfeldt, Scott

Techniques and confidence estimates for uncertainty analysis of measuring sound power of power tools
pp. 1371-1380(10)
Authors: Zechmann, Edward; Hayden, Charles

Propagation modeling parameters for wind turbines
pp. 1383-1388(6)
Authors: Kaliski, Kenneth; Duncan, Edward

Case study of industrial vehicle noise control by discrete source identification and analysis
pp. 1389-1398(10)
Author: Hamilton, David A.

Airborne weaponry noise measurements
pp. 1399-1409(11)
Authors: Downing, Micah; James, Michael; Ikelheimer, Bruce; Hobbs, Christopher; McInerny, Sally Anne

Airborne weaponry noise prediction model
pp. 1411-1417(7)
Authors: Ikelheimer, Bruce; Downing, Micah; James, Michael; McInerny, Sally

Reconstruction of in-flight interior acoustic field of an business jet using HELS method
pp. 1418-1427(10)
Authors: de Lima, Washington; Moondra, Manmohan S.; Wu, Sean F.

Case study for the assessment and mitigation of community noise for proposed residential units atop a fire station
pp. 1428-1439(12)
Authors: Spano, George; Brennenman, Robert; Joshi, Darshit

A comparison of green and standard diesel bus noise levels
pp. 1440-1447(8)
Authors: Ross, Jason C.; Staiano, Michael A.

Truck tires and quieter pavement contribution to roadside noise levels
pp. 1448-1459(12)
Authors: Rymer, Bruce; Donavan, Paul

New Federal policy on rail quiet zones: Pathway or roadblock to quieter grade crossings?
pp. 1460-1468(9)
Authors: Burge, Paul L.; Meister, Lance D.

Effects of different procedures for characterizing rail transit generated ground vibration
pp. 1469-1477(9)
Authors: Saurenman, Hugh; Dennis, Zack; Zapfe, Jeffery

Nonlinear effects in the propagation and measurement of blast noise
pp. 1478-1484(7)
Authors: Sparrow, Victor W.; Pater, Larry L.; Gabrielson, Thomas B.

Challenges for diagnostic measurement of acoustical environments in quiet modular classrooms
pp. 1485-1493(9)
Authors: Sutherland, Louis; Lubman, David

Measurement of sound power level using the parallelepiped surface: Investigation of the cos(theta) error
pp. 1494-1505(12)
Authors: Bard, Seth E.; Nobile, Matthew A.

Measurement and evaluation of blade passage frequency fluctuations
pp. 1506-1511(6)
Authors: Duke, Cole V.; Sommerfeldt, Scott D.; Gee, Kent L.; Duke, Connor R.

Sound quality investigation of notebook inlet grilles
pp. 1512-1523(12)
Authors: Gullbrand, Jessica; Beltman, Marco; MacDonald, Mark; Cordova, Jose A.

Development of an advanced acoustic model for military aircraft noise
pp. 1524-1530(7)
Authors: Plotkin, Kenneth J.; Schultz, Troy

Assessing human response to infrequent blast noise events
pp. 1531-1537(7)
Authors: Pater, Larry; Nykaza, Edward; Hodgdon, Kathleen K.; Atchley, Anthony; Baumgartner, Robert; Rathbun, Pamela; Luz, George

Speech intelligibility improvements of a small performing arts theater using absorptive panels
pp. 1538-1550(13)
Authors: Van Karsen, Jeffrey C.; Dreyer, Jason T.; Rao, Mohan D.

The greening of sound: Recent inclusion of acoustics in sustainable building certification
pp. 1551-1557(7)
Author: Kachur, Mandy

Effects of diamond grinding and grooving on tire/pavement noise
pp. 1558-1566(9)
Authors: Dare, Tyler P.; Bernhard, Robert J.; Thornton, William D.

Determining underground roof bolting machine operators noise exposure using laboratory results
pp. 1567-1576(10)
Authors: Matetic, R.J.; Kovalchik, Peter; Cole, Gregory; Peterson, Jeffrey; Pend, Syd

Technical innovations in the delivery of noise management information to community groups
pp. 1577-1583(7)
Author: Dubbink, David

Prediction of underwater noise from large cylindrical piles being driven by impact hammers
pp. 1584-1589(6)
Author: Hastings, Mardi C.

Narrowband sound power measurement using supersonic intensity in underwater reverberant environments
pp. 1590-1601(12)
Authors: Barnard, Andrew; Hambric, Stephen; Conlon, Stephen; Capone, Dean

Noise mitigation using passive vibroacoustic attenuation devices
pp. 1602-1609(8)
Authors: Griffin, Steven; Lane, Steven

Artificial neural network based temporal processing of waveforms to detect military impulse noise
pp. 1610-1620(11)
Authors: Bucci, Brian A.; Vipperman, Jeffrey S.

Measured and predicted vibration responses of layer soil
pp. 1621-1630(10)
Author: Nelson, James T.

Theoretical and impedance tube estimates of acoustical absorption of pavement cores
pp. 1631-1642(12)
Authors: Nelson, James T.; Kohler, Erwin; Ongei, Aybike; Rymer, Bruce

Random incidence sound absorption of coefficient micro-perforated absorbers
pp. 1643-1653(11)
Authors: Londhe, Niranjan R.; Bolton, J. Stuart; Yoo, Taewook; Alexander, Jonathan H.; Slama, David F.

An improved model for microperforated absorbers
pp. 1654-1661(8)
Authors: Yoo, Taewook; Bolton, J. Stuart; Slama, David F.; Alexander, Jonathan H.

Panel contribution study of a commercial excavator cab using sound intensity measurements
pp. 1662-1669(8)
Authors: Gujarathi, Rohit N.; Kolte, Kunal S.; Kshirsagar, Ketan S.; Salunke, Tejas; Rao, Mohan D.

Practical consideration in application of the nearfield acoustic holography for the heavy duty diesel engine
pp. 1670-1681(12)
Authors: Suh, Sanghoon; Dirks, Gijs

Plumbing noise reduction
pp. 1682-1692(11)
Author: O'Neil, Chip

Low cost operator installed engineering noise controls on surface coal augers
pp. 1693-1704(12)
Author: Bowers, Link R.

Cooperative noise control demonstration for a slot drill in the dimension stone industry
pp. 1705-1714(10)
Author: Argirakis, Anthony S.

An engineering approach to noise abatement in washing machines
pp. 1715-1731(17)
Authors: Barpanda, Dev; Tudor, Jay; Siavoshani, Saeed

Calibration procedure for phased array measurement in the Virginia Tech anechoic wind tunnel
pp. 1732-1743(12)
Authors: Remillieux, Marcel C.; Camargo, Hugo E.; Burdisso, Ricardo A.

Eigenvalue equalization applied to the active minimization of engine noise in a mock cabin
pp. 1744-1751(8)
Authors: Thomas, Jared K.; Lovstedt, Stephan P.; Blotter, Jonathan D.; Sommerfeldt, Scott D.

Drum silencer optimized for NC-weighted insertion loss
pp. 1752-1763(12)
Authors: Choy, Y.S.; Huang, L.