INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Resonance effect of nanofibrous layer on sound absorption
pp. 1799-1806(8)
Author: Kalinova, Klara

Sound absorption of sisal fiber panels
pp. 1806-1811(6)
Authors: Azevedo, Luvercy J.; Nabuo, Marco

Sound insulation of blowers and compressors by means of recycling material
pp. 1812-1819(8)
Authors: Kunzel, Karin; Schulz, Detlef; Siegemund, Andre

The effect of simulated environmental conditions on the distinctive features of the acoustic signal accompanying the corona process in laboratory conditions
pp. 1820-1826(7)
Authors: Wszolek, Tedeusz; Tadeusiewicz, Ryszard

The study of sound absorption characteristic prediction of miro-perforated panel absorber
pp. 1827-1833(7)
Authors: Zhang, Bin; Tao, Zeguang; Ding, Hui

Use of dissipative silencers for fan noise control
pp. 1834-1842(9)
Authors: Mesquita, Alexandre Luiz Amarante; Mesquita, Andre Luiz Amarante; Filho, Ernesto Arthur Monteiro

Wave number and propagation in anisotropic porous media
pp. 1843-1851(9)
Authors: Trans-Van, Jerome; Dazel, Olivier

A contribution for nonlinear structural dynamics characterization of cantilever beams
pp. 1852-1861(10)
Authors: de Barros, Everaldo; Mathias, Mauro Hugo

Accelerometer sensitivity for vibration measurement
pp. 1862-1867(6)
Author: Tsuei, Kuang-Yih

Comparing gender influence against age, corporeal mass index and vision on comfort levels to whole-body human vibration
pp. 1868-1877(10)
Authors: Duarte, Maria Lucia Machado; de Brito Pereira, Matheus; Misael, Marcos Roberto; Filho, Luiz Eduardo de Assis Fretas

Comparison of data acquisition systems performance in a modal testing of a flexible plate
pp. 1878-1885(8)
Authors: Dezotti, Victor; de Barros, Everaldo; de Camargo, Leandro

Diesel engine condition monitoring by use of surface vibration signals
pp. 1886-1894(9)
Author: Zhu, Jianyuan

Dynamic analysis of a new piezoelectric flextensional actuator using the J1-J4 optical interferometric method
pp. 1895-1904(10)
Authors: Marcal, Luiz A.P.; Leao, Jose V.R.; Nader, Gilder; Silva, Emilio C.N.; Higuti, Ricardo T.; Kitano, Claudio

Dynamic of thin plates with different boundary conditions
pp. 1905-1912(8)
Authors: Bonifacio, Paulo; Lenzi, Arcanjo

Dynamics of the hydraulic pivot of an internal combustion engine valve command mechanism: Mathematical modeling and experimental work
pp. 1913-1922(10)
Authors: Garzeri, Flavio Jose; Brasil, Reyolando M.L.R.F.

Friction-induced stick-slip vibrations in glass-run sealing systems
pp. 1923-1932(10)
Authors: Kim, Uije; Mongeau, Luc; Krousgrill, Charles

Phase requirements for non-null energy flow in one-dimensional domain
pp. 1933-1938(6)
Authors: Zindeluk, Moyses; Dias, Pedro Lisboa Pereira

Practical application of a portable vibration analysis system for measurements on aircraft engines
pp. 1939-1943(5)
Authors: Ginn, K.B.; Konstantin-Hansen, H.; Courrech, J.; Streiff, P.

Response of a ship's panel to turbulent boundary layer pressure fluctuations
pp. 1944-1953(10)
Authors: Ciappi, Elena; Magionesi, Francesca

Spectral analysis of acoustics and vibration signals using under-sampled data
pp. 1954-1959(6)
Authors: Wagstaff, Peter; Chassaignon, Christian

Vibration testing of the first stage booster adapter for the first VSB-30 sounding rocket vehicle test flight
pp. 1960-1968(9)
Authors: de Barros, Everaldo; Strafacci, Domingos Jose; Campos, Ailson Nogueira

A different perspective on the analysis of hearing protector attenuation test data and implications
pp. 1969-1976(8)
Author: Williams, Warwick

Field measurements of hearing protection device performance
pp. 1977-1986(10)
Authors: Franks, John R.; Davis, Rickie R.; Murphy, William J.

Human body conduction sensitivity in a sound field
pp. 1987-1995(9)
Authors: Stenfelt, Stefan; Reinfeldt, Sabine

Individual noise exposure in shooting sites
pp. 1996-2005(10)
Authors: Arezes, Pedro M.; Macedo, M. Cristina

Loudness matching in bone/tissue conducted noise
pp. 2006-2016(11)
Authors: McKinley, Richard; Kordik, Alexander; Dancer, Armand

New directions for custom earplugs
pp. 2016-2022(7)
Authors: Hall, John; Mobely, Frank; McKinley, Richard; Schley, Paul

Performance of earmuff protectors under controlled high amplitude impulsive noise
pp. 2023-2030(8)
Authors: Vergara, Erasmo F.; Birch, Robert S.; Gerges, Samir N.Y.

A new script-based automatic test system for sound level meters and noise dosemeters
pp. 2031-2038(8)
Author: Wright, Richard

A practical guide to factory acceptance testing with MIL-STD-740-1 and MIL-STD-740-2 in a non-laboratory environment
pp. 2039-2044(6)
Authors: Jones, Nathan; Dempsey, Ronald

Determination of noise emission by woodworking machines (sound power levels and emission sound pressure levels) using the sound pressure: Survey method and engineering method
pp. 2046-2055(10)
Author: Mikulski, Witold

Improved directivity of spherical microphone arrays
pp. 2056-2064(9)
Authors: Cardoso, Clara; Nelson, Philip

Integrated system for measurements in acoustics
pp. 2065-2074(10)
Author: Muller, Swen

Practically obtainable dynamic ranges of data acquistion systems based on 24-bit technology
pp. 2075-2083(9)
Authors: Andersen, Ole Thorhauge; Jacobsen, Niels-Jorgen; Gade, Svend

Sound level meter calibration using a 24bits AD/DA converter
pp. 2084-2093(10)
Authors: Budel, Fabio; Melo, Nelson

Subband adaptive null-forming with a directional microphone pair
pp. 2094-2100(7)
Authors: Cheng, Xiaobin; Yan, Zhaoli; Li, Xiaodong; Tian, Jing

Acoustic conditioning of the "Palacio da Justica do Estado do Rio Grande so Sul" in Porto Alegre, Rs, Brazil
pp. 2101-2110(10)
Authors: Simoes, Flavio Maya; de Oliveira, Diego Buselatto

Acoustic conditions of school classrooms in the federal district: Background noise and reverberation time
pp. 2111-2118(8)
Authors: Eniz, Alexandre; Garavelli, Sergio L.

An open-source platform for musical room acoustic research
pp. 2119-2128(10)
Authors: Ueda, Leo Kazuhiro; Kon, Fabio; Iazzetta, Fernando

Application of Bayesian inference in measurements of decay times in acoustically coupled spaces
pp. 2129-2137(9)
Authors: Xiang, Ning; Kleiner, Mendel; Goggans, Paul M.

Characterization of the acoustics quality of Basilica Menor Nossa Senhora da Goria Cathedral
pp. 2138-2147(10)
Authors: Moreno, Daniela M.; Reis, Letica B.; de F. Mendonca, Irene; Soares, Paulo F.; Isnard, Nicolas

Comparison between reverberation times calculated and measured
pp. 2148-2157(10)
Authors: Zannin, Paulo H.T.; Ferreira, Andressa M.C.; Zwirtes, Daniele P.; Stumm, Silvana B.; Nunes, Elenise L.S.; Tows, Martin

Determination of the acoustic absorption coefficient of the vegetal sponge
pp. 2158-2164(7)
Authors: Scherer, Mineia Johann; dos Santos, Jorge Luiz Pizzutti

Evaluation and optimization of acoustical environments in eating establishments
pp. 2165-2175(11)
Authors: Razavi, Zohreh; Hodgson, Murray

Influence of the mounting methods of baffles in reverberation room on their absorption
pp. 2176-2183(8)
Author: Mirowska, Marianna

Level adjustment for multi-channel impulse response measurements in building acoustics
pp. 2184-2193(10)
Authors: Massarani, Paulo Medeiros; Nabuco de Araujo, Marco A.; Venegas, Rodolfo

On the influence of the movable roof on the acoustical quality of Sao Paulo Hall
pp. 2194-2203(10)
Authors: Oliveira, Lenine V.; Tenenbaum, Roberto A.

Scaled absorption materials for scale modeling
pp. 2204-2208(5)
Authors: Nascimento, Ranny L.X.; Zindeluk, Moyses

Sound absorption properties of sustainable fibrous materials in an enhanced reverberation room
pp. 2209-2218(10)
Authors: D'Alessandro, Francesco; Pispola, Giulio

Sound insulation evaluation using transfer function measurements
pp. 2219-2225(7)
Authors: Venegas, Rodolfo; Nabuco, Marco; Massarani, Paulo

Sound insulation of plasterboard walls and airflow resistivity: An empirical examination with respect to practical applications
pp. 2226-2233(8)
Authors: Stani, M.M.; Muellner, H.; Plotizin, I.; Zlabinger, Karl

Study of the acoustic potentiality of "pet" type bottles as sonorous absorbent
pp. 2234-2240(7)
Authors: Scherer, Mineia Johann; Pizzutti dos Santos, Jorge Luiz

Swept-sine method improves signal-to-noise ratio in building acoustic applications
pp. 2241-2248(8)
Authors: Nikolic, Igor; Bjor, Ole-Herman; Nordby, Svein Arne

The influence of suspended ceiling mounting conditions of measured sound absorption coefficients
pp. 2249-2257(9)
Authors: de Godoy, Marcelo; Bistafa, Sylvio R.; Barry, Peter J.

Acoustical measurements for everyone
pp. 2258-2265(8)
Author: Blau, Matthias

Adjustment on level linearity around lower boundary of linear operating range of sound level meter
pp. 2266-2270(5)
Authors: Takinami, Hiroaki; Ohya, Masaharu; Wakabayashi, Tomoharu; Isahashi, Kiyokatsu

Uncertainty analysis in the investigation of sound level meters
pp. 2271-2278(8)
Authors: Wszolek, Grazyna; Engel, Zbigniew

Free-field reciprocity calibration method of laboratory standard microphone
pp. 2279-2282(4)
Authors: Suh, Sang Joon; Kwon, Hyu-Sang; Suh, Jae Gap

Microphone calibration
pp. 2283-2288(6)
Author: Rasmussen, Gunnar

Primary calibration of single-point laser Doppler vibrometers (LDV)
pp. 2289-2297(9)
Authors: Ripper, Gustavo P.; Garcia, Guilherme A.; Dias, Ronaldo S.; Zindeluk, Moyses

Some recent developments at the Institute for National Measurement Standard Canada
pp. 2298-2306(9)
Authors: Wong, George S.K.; Wu, Lixue; Hanes, Peter; Ohm, Won-Suk

Sources of uncertainty on sound level meters calibration
pp. 2307-2315(9)
Authors: Costa, Priscila; Budel, Fabio

Study on the measuring device of muzzle velocity using magnetic field gradient sensor
pp. 2316-2324(9)
Authors: Kim, In Woo; Chae, Je Wook; Ryu, Bong Jo

The evaluation of uncertainty in urban traffic noise measurement according to the ISO "Guide"
pp. 2325-2333(9)
Author: Caligiuri, Luigi Maxmilian

A study on effective configurations of sound barriers for Shinkansen track
pp. 2334-2342(9)
Authors: Abe, Yufuko; Nagakura, Kiyoshi; Kitagawa, Toshiki; Murata, Kaoru; Tanaka, Shin-ichiro; Ogata, Yukie

Analysis and error investigation using Duhamel's efficient calculation of sound field produced by moving source
pp. 2343-2352(10)
Authors: Nakajima, Hirofumi; Tsuru, Hideo; Ogata, Seigo

Experimental study on the performance of a simple noise barrier in presence of a Helmholtz resonator buried in the ground
pp. 2353-2357(5)
Author: Ouis, Djame

Influence of spectral emission on the dimension of acoustical barriers
pp. 2358-2365(8)
Authors: Neto, Maria de Fatima Ferreira; Rosao, Vitor Carlos Tadeia

Light-concrete with leather in noise control
pp. 2366-2372(7)
Author: Baffa, Iraides M.P.D.

Monitoring and evaluation of the wall effect
pp. 2373-2382(10)
Authors: Lisot, Aline; Reschetti Jr, Paulo R.; Soares, Paulo F.

Noise barrier with a lamellar diffractor on top
pp. 2383-2388(6)
Author: Boone, Marinus M.

Noise barriers: Dependence on topography
pp. 2389-2394(6)
Authors: Bamnios, Y.; Trochidis, A.

Numerical analysis of the additional attenuation due to the tops of edge modified barriers
pp. 2395-2403(9)
Authors: Sakuma, Tetsuya; Takumura, Noriyuki; Yasuda, Yosuke; Sakamoto, Shinichi

Spatial accuracy of the ray method in predicting insertion loss of a barrier on a reflecting ground
pp. 2404-2413(10)
Authors: Pazos, Daniel F.P.; Musafir, Ricardo E.; Avital, Eldad J.

Acoustics indoor simulation software: A case study in the textile industry
pp. 2414-2423(10)
Author: Arezes, Pedro M.

Estimation of partial area sound power data with beamforming
pp. 2424-2433(10)
Author: Hald, Jorgen

Identification of noise sources using genertic algorithm
pp. 2434-2442(9)
Authors: Nunes, Maria Alzira de Araujo; Duarte, Marcus Antonio Viana

Impulsive noise of printers: Measurement and characterization
pp. 2443-2452(10)
Authors: Baird, Terrence; Bray, Wade; Otto, Norman

In-situ measurement of sound absorption coefficient of test tracks - An alternative method for ISO 10844 qualification
pp. 2453-2461(9)
Authors: de Jesus, Gilberto Fuchs; de Oliveira, Cintia Lopes; Lao, Vania Luzia Tizo

Measuring the absorption coefficient of panels at oblique incidence by using inverse filtered MLS signals
pp. 2462-2471(10)
Authors: Cobo, Pedro; Cuesta, Maria; Pfretzschner, Jaime; Fernandez, Alejandro; Schmitt, Alain; Siguero, Manuel

Near-field acoustic holography based on an array of particle velocity sensors
pp. 2472-2481(10)
Author: Jacobsen, Finn

New system for monitoring exposure to impulsive noise
pp. 2482-2490(9)
Authors: Kardous, Chucri A.; Murphy, William J.

Perspective of the acoustic camera
pp. 2491-2498(8)
Authors: Dobler, Dick; Heilmann, Gunnar

Sound transmission characteristics of sandwich-panels with poro-elastic cores
pp. 2499-2508(10)
Authors: Kim, Jeong-Woo; Bolton, J. Stuart

The experimental results of NAH method with extra spatial spectrums
pp. 2509-2514(6)
Author: Nagamatsu, Masao

The use of near field acoustical holography for leak detection in miniature objects, such as hearing aids
pp. 2515-2525(11)
Authors: Dirks, G.; Gade, S.; Hald, J.

A finite element model for noise from firing ranges
pp. 2526-2535(10)
Author: Huseby, Morten

Advanced vibro-acoustic models of welded junctions
pp. 2536-2545(10)
Authors: Shorter, P.J.; Gooroochurn, Y.; Rodwald, B.

Applications of the fast multipole BEM to calculation of scattering coefficients of architectural surfaces in a wide range of frequencies
pp. 2546-2554(9)
Authors: Kosaka, Yoshiyuki; Sakuma, Tetsuya

Application of the ONERA's sAbrina solver to the numerical investigation of the engine noise reduction offered by new aircraft concepts
pp. 2555-2560(6)
Authors: Redonnet, Stephane; Manoha, Eric; Kenning, Owen

Decay with distance and Statistical Energy Analysis: A modification of the power balance equations to handle decay across subsystems
pp. 2561-2570(10)
Author: Fredo, Claes R.

Determination of internal and coupling loss factors of a box type structure using the power injection method
pp. 2571-2581(11)
Authors: Libardi, Ana Lucia; Varoto, Paulo Sergio

Determination of the transfer function of a finite plate covered with a foam layer
pp. 2582-2589(8)
Authors: Litwinczik, Vitor; Lauriks, Walter; Lenzi, Arcanjo

Dynamic analysis of frame structures at high frequencies using energy finite elements and spectral elements
pp. 2590-2598(9)
Authors: Santos, Demilson O.; Dos Santos, J.M.C.; Arruda, J.R.F.

FEM/FEM versus FEM/BEM vibro-acoustic coupling techniques applied to the Brazilian Vehicle Satellite Launcher (VLS) fairing problem: Advantages and drawbacks
pp. 2599-2608(10)
Authors: Pirk, Rogerio; Goes, Luiz Carlos S.; Desmet, Wim; Sas, Paul

Hydro-acoustic flow computations based on computational aero-acoustics (CAA) methods
pp. 2609-2618(10)
Authors: Pantle, Iris; Magagnato, Franco; Gabi, Martin

Influence of smoothing to the inverse finite element method for acoustic hot-spot identification
pp. 2619-2628(10)
Authors: Drenckhan, Joachim; Sachau, Delf

Measurement and modelling of variation of structural dynamic responses
pp. 2629-2638(10)
Authors: Kuroda, Katsuhiko; Yamazaki, Toru

Modeling vibration isolators at mid and high frequency using hybrid FE-SEA analysis
pp. 2639-2646(8)
Authors: Gardner, Bryce K.; Shorter, Philip J.; Cotoni, Vincent

Numerical estimation of sound radiation from some annular baffled plates
pp. 2647-2656(10)
Author: Arenas, Jorge P.