INTER-NOISE and NOISE-CON Congress and Conference Proceedings
ISSN 0736-2935 (Print)


The Noise-Con conference proceedings are sponsored by INCE/USA and the Inter-Noise proceedings by I-INCE. NOVEM (Noise and Vibration Emerging Methods) conference proceedings are included. All proceedings older than 5 years are free to download. Others are free to INCE/USA members and member societies of I-INCE.
Publisher: Institute of Noise Control Engineering
- Membership Information
- INCE Subject Classification
- Ingenta Connect is not responsible for the content or availability of external websites
Articles
Harmonoise: Simplification of comprehensive source and propagation models into an accurate and practicable engineering method
pp. 1374-1380(7)
Authors:
Nota, R.; Leeuwen, J.J.A.; Barelds, R.; Beuving, M.; Cremezi, C.; Defrance, J.; Jonasson, H.G.; van Maercke, D.; Taraldsen, G.; Watts, G.; Witte, J.
CALM - Strategic planning of future noise research in Europe
pp. 1381-1388(8)
Authors:
Rust, A.; Affenzeller, J.
Numerical-experimental noise characterisation of road public transportation network
pp. 1389-1394(6)
Authors:
Scarselli, G.; Monaco, E.; Viscardi, M.; Lecce, L.
Aircraft noise and measures of sleep arousal
pp. 1395-1399(5)
Authors:
Hume, K.I.; Whitehead, C.
HARMONOISE project - WP4 experimental campaigns: Comparison among methods to separate road traffic noise from extraneous noise
pp. 1400-1407(8)
Authors:
Paini, D.; Gauvreau, B.; Kephalopoulos, S.; Berengier, M.; Iacoponi, A.; Licitra, G.; Turchini, G.
Vibration monitoring and noise improvement of an old steel railway bridge
pp. 1408-1414(7)
Authors:
Furtner, P.; Wenzel, H.
Identification of errors in the in situ method for sound absorption measurements
pp. 1415-1422(8)
Author:
Massarani, P.M.
3D CFD-CAA method for prediction of pressure pulsation and sound field in rotating machines
pp. 1423-1430(8)
Authors:
Timouchev, S.; Hamzaoui, N.; Pavic, G.; Aksenov, A.
Validation of aeroacoustic numerical simulations with wind tunnel measurements
pp. 1431-1438(8)
Authors:
Zeibig, A.; Schulze, C.; Sarradj, E.; Bauer, M.
Pantograph noise measurements in Madrid-Sevilla high speed train (AVE)
pp. 1439-1446(8)
Authors:
Genesca, M.; Sole, J.; Romeu, J.; Alarcon, G.
Finite wave element method and its application for engineering analysis
pp. 1447-1451(5)
Authors:
Bykov, Andrey S.; Sukhanov, Sergey O.
Measurement and evaluation of low frequency impact noise in lightweight wood floor/ceiling assemblies
pp. 1452-1456(5)
Authors:
LoVerde, J.; Dong, W.
Influence of friction on noise and vibrations of tyres
pp. 1457-1464(8)
Authors:
Kroger, M.; Lindner, M.; Popp, K.
Quantification of tire/pavement noise: Application of the sound intensity method
pp. 1465-1473(9)
Authors:
Donavan, P.; Rymer, B.
Finite element calculations of structural-acoustic modes of vehicle interior for simplified models of motorcars
pp. 1474-1481(8)
Authors:
Georgiev, V.B.; Krylov, V.V.; Winward, R.E.T.B.
Experimental investigation of acoustic resonance properties of vehicle compartments
pp. 1482-1489(8)
Authors:
Gorman, R.; Krylov, V.V.
Modeling reinforced plates using the spectral element method
pp. 1490-1496(7)
Authors:
Donadon, L.V.; Albuquerque, E.L.; Arruda, J.R.F.
A review of United State noise policy
pp. 1497-1504(8)
Authors:
Maling, G.C.; Finegold, L.S.
Noise mitigation measures in sporting arenas - Acoustic consequences resulting from the transformation of the Ghent's "Sportpaleis" in a mega dance hall
pp. 1505-1510(6)
Authors:
Pleeck, D.; Geens, L.
Numerical analysis of unsteady flow field and flow noise of a fan system
pp. 1511-1516(6)
Authors:
Jean, Wan-Ho; Cho, Jang-Hyung
Interior and exterior noise reduction study of the wheel loader
pp. 1517-1521(5)
Author:
Chun, Du Hwan
Sweep signals optimization for ultrasonic transducer response equalization
pp. 1522-1529(8)
Authors:
Costa-Felix, Rodrigo P.B.; Machado, Joao C.
Behavior analysis of the ancillary parts and crankshaft of diesel engine for noise reduction
pp. 1530-1537(8)
Author:
Ishihara, Akira
Analysis of tire/road noise radiation characteristics under acceleration conditions by sound intensity
pp. 1538-1543(6)
Authors:
Sakamoto, I.; Tanaka, T.; Katsura, N.; Fujikawa, Y.; Kogawa, S.
Road traffic noise prediction model "ASJ RTN-Model 2003" proposed by the Acoustical Society of Japan - The framework and the accuracy of the prediction
pp. 1544-1551(8)
Authors:
Yamamoto, K.; Tachibana, H.
A consideration on noise reduction effect and noise reduction mechanism of two-layer asphalt pavement
pp. 1552-1559(8)
Authors:
Namikawa, Y.; Koshiba, T.
Active control of interior noise of box structure using structural intensity method
pp. 1560-1567(8)
Authors:
Liu, Z.S.; Lee, H.P.; Lu, C.; Lim, S.P.
Study on sound from stream of water passing through channel with step and its sound quality
pp. 1568-1571(4)
Authors:
Minorikawa, G.; Maruta, Y.; Nakaniwa, H.
An active sinusoidal noise control system for diesel engine generator
pp. 1572-1579(8)
Authors:
Fujii, Kensaku; Fujita, Yusuke; Muneyasu, Mitsuji
Determining the EMC requirements for electroacoustic instruments complying with IEC standards
pp. 1580-1586(7)
Author:
Tyler, Richard
Soundscape of urban parks in Hong Kong
pp. 1587-1594(8)
Authors:
Wong, C.Y.; Lam, K.C.; Hui, W.C.
Noise and dynamic problems during developing a new high speed train in Korea
pp. 1595-1602(8)
Author:
Chung, Kyung-Ryul
Examination of perceived air pollution as a moderator of reaction to aircraft noise
pp. 1603-1610(8)
Authors:
Hatfield, J.; Soames Job, R.F.
Experimental examination of the effect of attitude to the noise source on reaction, and of reaction on performance
pp. 1611-1618(8)
Authors:
Djokvucic, I.; Hatfield, J.; Soames Job, R.F.
Physically based modelling of tire-rolling-noise by a finite element approach
pp. 1619-1626(8)
Authors:
Brinkmeier, M.; Nackenhorst, U.; von Estorff, O.; Petersen, S.
The principle of an active scatterer based on the JMC method
pp. 1627-1633(7)
Author:
Uosukainen, S.
Fast estimation of amplitude and phase of noise reduction
pp. 1634-1639(6)
Authors:
Sun, Hanwu; Shue, Louis; Chen, Jianfeng
Vibration analysis of office machines by SEA using FE model
pp. 1640-1645(6)
Authors:
Mori, Atsuo; Sasaki, Yuko; Takanashi, Akio; Kuroda, Katsuhiko; Yamazaki, Toru; Ohno, Shinichi
Robust design of 3-point engine mount system with improved NVH qualities
pp. 1646-1651(6)
Authors:
Bang, Jung-Hwan; Kang, Koo-Tae; Yoon, Hee-Wook; Cha, Jin-Soo; Seo, Jae-Jun
Optical measurement of acoustic pressure and vibration
pp. 1652-1658(7)
Authors:
Slegrova, Z.; Balek, R.
Multi criteria optimization of complex noise barriers
pp. 1659-1666(8)
Authors:
Baulac, M.; Defrance, J.
Numerical computation of the impulsive sound generated by a projective discharging from a muzzle
pp. 1667-1674(8)
Authors:
Bin, Jonghoon; Kim, Jaeheon; Lee, Soogab
On the uncertainty of meteorolgical corrections in sound power determination
pp. 1675-1680(6)
Author:
Wittstock, V.
The influence of bandwidth on the qualification of anechoic and hemianechoic rooms
pp. 1681-1686(6)
Authors:
Wittstock, V.; Bethke, C.
Application of Statistical Energy Analysis to vibration prediction in a gas heat pump outdoor unit
pp. 1687-1692(6)
Authors:
Tsujiuchi, N.; Koizumi, T.; Kanetani, Y.
Optimum active noise reduction based on acoustical analysis in the cabin of an agricultural tractor
pp. 1693-1696(4)
Authors:
Koizumi, T.; Tsujiuchi, N.; Nakamura, S.
Oper: An innovating urban noise monitoring system aiming at sustainable development of the enviroment
pp. 1697-1702(6)
Authors:
Chopard, F.; Dufournet, D.; Faiget, L.; Aujard, C.
ANAIS: An innovating system for aircraft noise and track monitoring (via the Internet)
pp. 1703-1709(7)
Authors:
Chopard, F.; Dufournet, D.; Faiget, L.; Aujard, C.
Isolation of GOHIF device considering human body structure
pp. 1710-1716(7)
Authors:
Lee, S.B.; Choe, E.J.; Ryu, B.J.; Kim, H.J.
Characteristics of rolling noise on narrow-gauge lines in Japan
pp. 1717-1724(8)
Authors:
Zenda, Yasuo; Tanaka, Shin-ichiro; Nagakura, Kiyoshi; Sunaga, Yoichi; Obara, Takanori; Satoh, Kiyoshi
A simple method to compute aircraft noise inside dwellings
pp. 1725-1732(8)
Authors:
Brutel-Vuilmet, C.; Jean, P.; Villot, M.
Propeller and shaft induced structure-borne noise isolation of a motor yacht
pp. 1733-1740(8)
Authors:
Wang, Wei-Hui; Liou, Der-Yuan; Fang, Chang-Kai; Lu, Wei-Yu; Ko, Tseng-chung; Wu, Shih-Chu
In flight experiments of local active noise attenuation in small aircraft
pp. 1741-1748(8)
Authors:
Romeu, J.; Pamies, T.; Jimenez, S.; Llibre, P.
Flow control technique to modify the aeroacoustic and aerodynamic characteristics of a high-speed pantograph by ejection of jets
pp. 1749-1756(8)
Authors:
Ikeda, M.; Yoshida, K.; Suzuki, M.
Binaural transfer path analysis and similation for door opening/closure sound improvement
pp. 1757-1763(7)
Authors:
Sellerbeck, P.; Stanley, R.; Young, S.
Acoustical design of brass band school concert hall in Ankara
pp. 1764-1767(4)
Author:
Bayazit, N.T.
Performance study of the FXLMS algorithm for active noise control with plant uncertainty
pp. 1768-1775(8)
Authors:
Song, Ying; Zhang, Jianmin; Shue, Louis
An advanced method for acoustic noise reduction for speech enhancement
pp. 1776-1783(8)
Authors:
Zhang, Jianmin; Shue, Louis; Song, Ying; Liu, Song
Results of a new method of measuring vehicles noise emission in real driving conditions
pp. 1784-1789(6)
Authors:
Moran, Laura; Casini, David; Poggi, Andrea
Investigation on the performance of high sound insulation ventilating windows
pp. 1790-1795(6)
Authors:
Asdrubali, F.; Buratti, C.; Baldinelli, G.
The influence of the massive external wall on the sound insulation between the rooms in building
pp. 1796-1801(6)
Authors:
Izewska, A.; Szudrowicz, B.
A study of the evaluation methodology for environmental noise quality assessments
pp. 1802-1807(6)
Authors:
Jo, Kyoung-Sook; Hur, Deog-Jae; Hwang, Dae-Sun; Cho, Yeon
Optimization of 2-dimensional shape of pantograph panhead for high speed trains
pp. 1808-1815(8)
Authors:
Yoshida, K.; Suzuki, M.; Ikeda, M.
The situation of environmental noise monitoring in Taiwan
pp. 1816-1819(4)
Authors:
Chuang, Shiun-Cheng; Chen, Chien-Wei
Galerkin and control-volume FEMs evaluation for acoustic problems
pp. 1820-1827(8)
Authors:
Redon, Emmanuel; Masse, Nadia; Prax, Christian
A simple method to calculate noise levels and noise contours during subsonic aircraft takeoff
pp. 1828-1838(11)
Author:
Norgia, L.
The new four subterranean halls in the Musikverein building in Vienna
pp. 1839-1843(5)
Author:
Quiring, K.B.
Optimal prediction using reformulated minimum variance predictor and time series modeling
pp. 1844-1851(8)
Authors:
Ahmad, R.K.R.; Tokhi, M.O.
Sound absorption behavior of anisotropic, fine fiber material
pp. 1852-1856(5)
Authors:
Kalinova, K.; Jirsak, O.; Novak, J.
Performance of BiCG-like iterative solvers with fast multipole boundary element method and improvement of convergence
pp. 1857-1864(8)
Authors:
Yasuda, Y.; Sakuma, T.
Aircraft and road traffic noise exposure and children's mental health in the RANCH study
pp. 1865-1870(6)
Authors:
Stansfeld, S.A.; Clark, C.; Cameron, R.M.; Haines, M.M.; van Kamp, I.; van Kempen, E.; Lopez-Barrio, I.
A hybrid analysis metholology for improved accuracy in low cost jet noise modelling
pp. 1871-1881(11)
Authors:
O'Hara, D.; Andersson, N.; Jordan, P.; Billson, M.; Eriksson, L.; Davidson, L.
A one-dimensional wave model for numerical analyses of ventilation openings with Helmholtz resonator attachments
pp. 1882-1887(6)
Authors:
Terao, M.; Sekine, H.; Ogawa, Y.; Sakashita, A.
Fast simulation of sound fields for urban square animation
pp. 1888-1895(8)
Authors:
Meng, Y.; Kang, J.
Application of polyester nonwoven fabric as absorbing material for wedges in an anechoic room
pp. 1896-1901(6)
Authors:
Suzuki, Yoiti; Saito, Fumitaka; Nakai, Katsumi; Shimada, Hidehiko
Performance evaluation for noise supression of a silencer in small arms
pp. 1902-1909(8)
Authors:
Lee, S.B.; Park, M.S.; Ryu, B.J.; Choe, E.J.; Kim, I.W.
Update on the activities of EC working group assessment of exposure to noise (WG-AEN)
pp. 1910-1916(7)
Author:
Hinton, J.
Measured sound levels of Japanese young people while listening to loudspeakers
pp. 1917-1923(7)
Authors:
Laitinen, H.; Yoshikawa, T.; Saito, F.; Suzuki, Y.
Modeling of the hydroacoustic behaviour of a butterfly valve
pp. 1924-1929(6)
Author:
Villouvier, V.
Prediction of damping loss factor of brake insulators using the Finite Element Method
pp. 1930-1937(8)
Authors:
Triches Jr, Mario; Gerges, Samir N.Y.; Jordan, Roberto; Filho, Evandro C.
A critical review and inter-comparison of methods for quantifying tonal and impulsive features in environmental noise
pp. 1938-1945(8)
Authors:
Berry, Bernard F.; Proter, Nicole D.
High accuracy estimation of arrival direction of infrasound
pp. 1946-1949(4)
Authors:
Miwa, Motoatsu; Matsunaga, Tomoyuki; Saito, Mikito; Shibayama, Hideo
Combined effects of road traffic and aircraft noise exposure on cognitive performance in the RANCH study
pp. 1950-1956(7)
Authors:
Stansfeld, S.A.; Clark, C.; Martin, R.; van Kempen, E.; Davies, H.; Haines, M.M.; Lopez-Barrio, I.; Matheson, M.; Berry, B.
I-INCE Technical Study Group 2 on "Noise labels for consumer and industrial products" - An update on progress
pp. 1957-1962(6)
Author:
Berry, Bernard F.
On the application of the projective sound models in ISO 17201 to ballistic trajectories
pp. 1963-1968(6)
Author:
Hirsch, K-W.
Low-frequency vibroisolation mounting for engines of new generation
pp. 1969-1976(8)
Authors:
Baklanov, V.; Golov, I.; Pastnov, S.
The realization of the standard of sound pressure unit at national metrological institution (GUM) in Poland
pp. 1977-1984(8)
Authors:
Szelag, M.; Zmierczak, T.
Combined effects of aircraft noise and road traffic noise on annoyance: The RANCH study
pp. 1985-1991(7)
Authors:
van Kamp, Irene; Nilsson, M.E.; van Kempen, E.; Stellato, R.K.; Lopez-Barrio, I.; Davies, H.; Stansfeld, S.
Reduction of sound immission in buildings by sound insulation using active facades
pp. 1992-1997(6)
Authors:
Kurtze, L.; Nordmann, R.; Doll, T.; Bein, t.
SADMAM - Combining measurements and calculations to map noise in Madrid
pp. 1998-2005(8)
Authors:
Manvell, D.; Ballarin Marcos, L.; Stapelfeldt, H.; Sanz, R.
Drivers' exposure to noise and vibration in city transportation
pp. 2006-2010(5)
Authors:
Koton, J.; Lipowczan, A.; Kowalski, P.; Szopa, J.
An actively controlled triple-glazed window
pp. 2011-2018(8)
Authors:
Jakob, A.; Bauers, R.; Moser, M.
Experience in planning of noise mitigation measures and in evaluating their effectiveness in the city of Modena
pp. 2019-2026(8)
Author:
Bertoni, Daniele
Time varying forward projection using wavenumber formulation
pp. 2027-2034(8)
Authors:
Grulier, V.; Thomas, J-H.; Pascal, J-C.; Le Roux, J-C.
Study of evaluation method for tire noise by applying sound quality metrics
pp. 2035-2041(7)
Authors:
Lee, Sang-Ju; Park, Joo-Bae; Kang, Hyun-Seok
Basic research for noise reduction of automatic water supply equipment
pp. 2042-2049(8)
Authors:
Park, Young-Chul; Kanemitsu, Yoichi; Kijimoto, Shinya; Guo, Shijie
Free-field qualification of anechoic chambers: Standardisation of the measurement practice
pp. 2050-2056(7)
Author:
Lord, R.M.
Source related mitigation measures and their effectiveness
pp. 2057-2064(8)
Author:
Heidebrunn, Frank
Human perception thesholds when exposed to vibrations of single and double frequency components
pp. 2065-2070(6)
Authors:
Ljunggren, F.; Wang, J.; Agren, A.
The vibration reduction index Kij: Laboratory measurements versus predictions EN 12354-1 (2000)
pp. 2071-2077(7)
Authors:
Crispin, C.; Mertens, C.; Blasco, M.; Ingelaere, B.; Van Damme, M.; Wuyts, D.
- Access Key
- Free content
- Partial Free content
- New content
- Open access content
- Partial Open access content
- Subscribed content
- Partial Subscribed content
- Free trial content