INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Estimation of direction of arrival from two noise sources in a highly reverberant space using a sphere baffled microphone array
pp. 1462-1469(8)
Author: Fukudome, Kimitoshi

Non-destructive detection of a defect in a concrete block
pp. 1470-1477(8)
Authors: Abe, Masato; Fujioka, Toyota; Nagata, Yoshifumi

Fundamental study on sound source localization and restoration - Introduction of blind source separation and inverse filtering
pp. 1478-1485(8)
Authors: Nakasako, Noboru; Ogura, Hisanao; Sakuma, Yuko

Speech signal enhancement based on the frequency domain binaural model
pp. 1486-1491(6)
Authors: Nakashima, Hidetoshi; Sato, Norifumi; Nakanishi, Takashi; Chisaki, Yoshifumi; Usagawa, Tsuyoshi; Ebata, Masanao

Fault detection in a ball bearing system using minimum variance Cepstrum
pp. 1492-1499(8)
Authors: Choi, Young-Chui; Kim, Yang-Hann

On the influence of low frequencies on the annoyance of noise from neighbours
pp. 1500-1503(4)
Author: Rindel, Jens Holger

Survey on the vocabularies for evaluating floor impact sound insulation performance in apartment houses
pp. 1504-1509(6)
Authors: Song, Min-Jeong; Kim, Sun-Woo; Song, Hyuk; Gi, No-Gab; Lee, Ju-Yeob

Establishment of criteria on floor impact-sound insulation for apartment housing in Korea
pp. 1510-1517(8)
Authors: Kim, Heung-Sik; Kim, Myung-Jun; Kim, Ha-Geun

Variability of the predicted reverberation times of a concert hall induced by absorption coefficient uncertainties
pp. 1518-1525(8)
Authors: Driot, Nicolas; Le Bot, Alain; Perret-Liaudet, Joel

Architectural acoustics laboratory of Sound China University of Technology
pp. 1526-1531(6)
Authors: Jianzhen, Qiu; Shuoxian, Wu

Field measurement and rating of airborne sound insulation for moving wall installed convention center in Jeju Island
pp. 1532-1538(7)
Authors: Oh, Yang-Gi; Jeong, Gah-Gheol; Lee, Sung-Ho

An analysis of rumble noise in passenger vehicle compartment
pp. 1539-1547(9)
Authors: Park, Dong Chul; Baik, Hong Sun; Jung, Seung-Gyoon

A strategy for signal recognition under adverse conditions
pp. 1548-1555(8)
Authors: Holstein, Peter; Koch, Michael; Hirschfeld, Diane; Hoffmann, Rudiger; Bader, Daniel; Augsburg, Klaus

Artificial neural networks in sound quality design: An application for hair dryers
pp. 1556-1563(8)
Authors: Turkdogru, Nurkan; Belck, H. Temel

Comparison of rating scales for personal computer noise and vehicle noise by a new inductive method
pp. 1564-1571(8)
Authors: Togawa, Shinji; Ogawa, Kazuhiro; Furihata, Kenji; Yanagisawa, Takesaburo

Relationship between auditory impression and onomatopoeic features of environmental sounds
pp. 1572-1579(8)
Authors: Takada, Masayuki; Tanaka, Kazuhiko; Iwamiya, Shin-ichiro

Evaluation of sound quality of business machines - Background and problems
pp. 1580-1589(10)
Authors: Takanashi, Akio; Mori, Atsuo; Nomura, Makoto

Evaluation on the noise of HDD
pp. 1590-1597(8)
Authors: Choi, Sungjoon; Moon, Wonkyu; Gang, Sungwoo; Hwang, Taeyeon

Sizing design sensitivity analysis and optimization of radiated noise from a thin-body
pp. 1598-1605(8)
Authors: Lee, Jeawon; Wang, Semyung

Tuning fork modal analysis and sound pressure calculation using FEM and BEM
pp. 1606-1610(5)
Authors: Jarng, Soon Suck; Choi, Eun Young

Prediction of high-frequency sound radiation from muffler jacket using a simplified BEM
pp. 1611-1616(6)
Authors: Kim, Jae-Kwon; Ih, Jeong-Guon

Analysis and optimization of steering column mounting bracket
pp. 1617-1624(8)
Authors: Ko, Chang-Seong; Yoo, Dong-Ho; Park, Kyung-Whan

An integrated approach for predictive vibration, ride and acoustics engineering
pp. 1625-1632(8)
Authors: Ferrarotti, Gabriele; Migeot, Jean-Louis

Measurements of structural intensity associated with in-plane vibrations of plates
pp. 1633-1640(8)
Authors: Kil, Hyun-Gwon; Jeon, Jin-Sook; Kim, Chang-Yeol; Lee, Byoung-Chul; Hong, Suk-Yoon

Estimation of the uncertainty for the comparison calibration of accelerometer
pp. 1641-1647(7)
Authors: Lee, Yong Bong; Lee, Doo Hee; Jung, Sung Soo; Kim, Yong Tae; Jeon, Byung Soo

The microphone system for near whispering
pp. 1648-1657(10)
Authors: Choi, Sungjoon; Moon, Wonkyu; Lee, Jeong Hyun

Sound field measurement of speaker in a free field using improved automated sound level meter calibration system
pp. 1658-1663(6)
Authors: Kim, Yong Tae; Kim, Ho Chul; Jho, Moon Jae; Suh, Jae Gap; Jung, Sung Soo

Measurements of turbulent boundary layer wall pressures and radiated sound from a compliant coated wall
pp. 1664-1672(9)
Authors: Song, Wooseog; Lee, Chang Jun; Lee, Seungbae

Measurement of oblique incidence reflection coefficient of sound absorpting materials by beamforming method
pp. 1673-1680(8)
Authors: Sun, Jong Chun; Ju, Hyung Jun; Kang, Yeon June

Relation between the image of long-term noise and the perception of short-term noise
pp. 1681-1688(8)
Authors: Namba, Seiichiro; Kuwano, Sonoko; Kato, Tohru

Memory of the loudness of sounds using sketch method
pp. 1689-1696(8)
Authors: Kuwano, Sonoko; Namba, Seiichiro; Kato, Tohru

Survey on the health effects of aircraft noise on the residents around new Tokyo International Airport (Narita Airport)
pp. 1697-1702(6)
Authors: Koyasu, Masaru; Yasuoka, M.; Kabuto, K.; Kono, S.; Tamura, A.; Yamamoto, K.; Noda, K.

Road traffic noise perception influenced by the visual information
pp. 1703-1706(4)
Authors: Kook, Chan; Jang, Gil-Soo; Lee, Tai-Gang; Chon, Ji-Hyun

Some remarks on indices of dose-response to community noise
pp. 1707-1712(6)
Authors: Mishina, Yoshiaki; Asai, Atsushi; Oishi, Yasaki; Hayashi, Akinori; Omiya, Masaaki; Kuno, Kazuhiro

Historical development and current status of exposure-response relationships between transportation noise and community annoyance
pp. 1713-1720(8)
Authors: Finegold, Lawrence S.; Finegold, Michiko So

Acoustic radiation from curved intake using high-order, high-resolution numerical methods
pp. 1721-1728(8)
Authors: Shim, In Bo; Lee, Duck Joo; Ahn, Chang Su

Source arrays for the realization of broadband sound fields in ducts
pp. 1729-1736(8)
Authors: Jeong, Wontae; Lee, Soogab; Joseph, Philip

Experimental and numerical study of spatial coherence of surface pressure on a square cylinder for numerical aerodynamic noise prediction
pp. 1737-1744(8)
Authors: Oshima, Takuya; Sekine, Hidehisa; Terao, Michihito

Array measurement techiques for noise source location of helicopter main rotor noise
pp. 1745-1752(8)
Authors: Nagai, Kenichiro; Oinuma, Hideshi; Ishii, Takuya; Takeda, Katsumi; Kondo, Natsuki; Saito, Shigeru

Numerical study on mode transition of an open cavity with lids
pp. 1753-1760(8)
Authors: Heo, Dae Nyoung; Kim, Jae Wook; Lee, Duck Joo

An experimental study on noise source characteristics in a muffler with pulsating flow
pp. 1761-1768(8)
Authors: Esaki, Takashi; Yokota, Satoshi; Mikami, Masato; Kojima, Naoya

Development of combined CAA-CFD algorithm for the efficient simulation of aerodynamic noise generation and propagation
pp. 1769-1776(8)
Authors: Cheong, Cheolung; Rye, Jewook; Lee, Soogab

The efficiency of the noise barrier with 2-D tube array top shaped
pp. 1777-1779(3)
Authors: Jung, Sung Soo; Kim, Yong Tae; Jeon, Byung Soo; Cho, Seung Il

The use of MLS based methods for characterising the effectiveness of noise barriers and absorptive road surfaces
pp. 1780-1787(8)
Authors: Watts, Greg; Morgan, Phil

Improvement of noise barrier efficiency
pp. 1788-1795(8)
Authors: Padmos, Cristo; Hageman, Evert

Efficiency of absorptive louver
pp. 1796-1801(6)
Authors: Matsumoto, Toshio; Yamamoto, Kohei; Kuno, Kuzuhiro

Acoustic performance of parallel barriers in urban environments
pp. 1802-1809(8)
Authors: Kwok, M.P.; Li, K.M.; Tang, S.H.; Frommer, G.H.

The new framework of EN standards for traffic noise reducing devices
pp. 1810-1815(6)
Authors: Clairbois, Jean-Pierre; Garai, Massimo

Vibration-screening effect of PC wall-piles through full-size and medium-size field measurements
pp. 1816-1823(8)
Authors: Kani, Yukihiko; Hayakawa, Kiyoshi; Kobayashi, Yoshimasa; Nabeshima, Yasuyuki

Analysis of acoustic intensity around the dummy head
pp. 1824-1829(6)
Authors: Yamada, Kazuyuki; Shibayama, Hideo

HARMONOISE Project (WP4) - First experimental road traffic noise campaign: Comparison among methods to separate road traffic noise from extraneous noise
pp. 1830-1836(7)
Authors: Paini, Dario; Gauvreau, Benoit; Kuhner, Dietrich; Knauss, Dieter; Kephalopoulos, Stylianos; Berengier, Michel; Licitra, Gaetano; Iacoponi, Andrea

Dynamic evaluation of the noise emitted by a bimodal (passenger cars/buses) traffic flow
pp. 1837-1844(8)
Authors: Lelong, Joel; Leclercq, Ludovic

Traffic noise in Beijing - The history and some new phenomena
pp. 1845-1852(8)
Authors: Tian, Jing; Wang, Yi

Noise level in a middle-sized town and implementation of noise control measures
pp. 1853-1858(6)
Authors: Figuerola, Josep Arnau; Matos, Joan Carles Blanco; Carbonell, Alexandre Deltell; Domingo, Robert Barti

A parametric study to determine robust open-loop advanced noise abatement approach procedures
pp. 1859-1869(11)
Authors: Ho, Nhut Tan; Clarke, John-Paul; Ren, Liling

Road traffic noise prediction model around signalized intersections
pp. 1870-1873(4)
Authors: Suzuki, Tadashi; Tsukui, Keisuke; Oshino, Yasuo; Tachibana, Hideki

An environmental friendly vehicle horn system to reduce noise pollution
pp. 1874-1880(7)
Authors: Zahid, Ahmer Arsalan; Khan, Taimur

Power train noise analysis and chassis design for the noise reduction of an electrical forklift truck
pp. 1881-1887(7)
Authors: Kim, Nag-In; Kwon, Young-Sik; Lee, Sung-Ku

Noise characteristics of pile driving operation and design of a low-noise pile cap based on the scale model experiment
pp. 1888-1893(6)
Authors: Lee, Jong-Hwa; Ih, Jeong-Guon; You, Sung-Kun

Measurements of sound pressure, sound power and sound intensity generated by a garbage truck
pp. 1894-1901(8)
Authors: Samagaio, Antonio; Restivo, Francisco; Carvalho, Salome; Marques, Sandra

Study on contribution of forklift's booming noise sources
pp. 1902-1909(8)
Authors: Park, Seok-Tae; Hur, Deog-Jae; Kim, Kyung-Hwan

Development of a low-noise hydraulic breaker
pp. 1910-1915(6)
Authors: Ih, Jeong-Guon; Lee, Jong-Hwa; Park, Sung-Ha; Lim, Jong-Hyuk

Development of a low nosie hydraulic excavator
pp. 1916-1923(8)
Authors: Kang, Jongmin; Lee, Hojun; Yook, Wooksung

Acoustic impact evaluation and mitigation of cement production plants
pp. 1924-1931(8)
Authors: Asdrubali, Francesco; Baldinelli, Giorgio

Noise characteristics of a farm tractor
pp. 1932-1939(8)
Authors: Lee, Sung Il; Kim, Cheol Ho

On the mechanical-electrical hybrid passive damping treatments
pp. 1940-1947(8)
Authors: Park, Chul H.; Park, Hyun C.

Development of micro digital system for PDF algorithm for active vibration control
pp. 1948-1955(8)
Authors: Kwak, Moon Kyu; Heo, Seok; Kim, Ki-Young

Multi-mode piezoelectric shunt damping of smart panels for noise reduction
pp. 1956-1963(8)
Authors: Kim, Jaehwan; Joung, Young-che

System identification of structural acoustic system using the scale correction
pp. 1964-1970(7)
Authors: Hwang, Woo Seok; Lee, Doo Ho

Active control of flow-induced vibration using piezoelectric and neural-networks
pp. 1971-1978(8)
Authors: Kim, Do-Hyung; Chang, Young-Hwan; Han, Jae-Hung; Lee, In

A four active pole, permanent magnet biased homopolar magnetic bearing with fault tolerant capability
pp. 1979-1985(7)
Author: Na, Uhn Joo

Fault tolerant control of heteropolar magnetic bearings with force invariance
pp. 1986-1993(8)
Author: Na, Uhn Joo

Thermotactile perception threshold testing for vibration-induced neuropathy in hand-arm vibration syndrone patients
pp. 1994-1999(6)
Authors: Sakakibara, Hisataka; Hirata, Mamoru; Maeda, Setsuo

Modelling of human body with the spinal column by multi body approach (Construction of the simplified model)
pp. 2000-2005(6)
Authors: Nakai, Kazuma; Yoshimura, Takuya

Estimation of dynamic response of human body sitting on the polyurethane foam
pp. 2006-2013(8)
Authors: Tamaoki, Gen; Yoshimura, Takuya

Development of a six degree of freedom electro vibrator for human vibration experiment
pp. 2014-2017(4)
Authors: Maeda, Setsuo; Yamashita, Kouji

Dynamic load factor for floor vibration due to lively concert
pp. 2018-2024(7)
Authors: Hong, Kappyo; Yoon, Kwang Sup

A systematic comparison of different seats on shuttle cars used in underground coal mines
pp. 2025-2032(8)
Authors: Kittusamy, N. Kumar; Mayton, Alan G.; Jobes, Christopher C.; Ambrose, Dean H.

Experience on building acoustics quality in Belgian residences
pp. 2033-2040(8)
Author: Vermeir, G.

Use of one-third octave-band spectral data in cummunity noise models
pp. 2041-2045(5)
Authors: Roof, Christopher J.; Gulding, John M.; Fleming, Gregg G.

Why do residents not consider information from community broadcast systems as noise?: From the viewpoint of soundscape study
pp. 2046-2052(7)
Authors: Nagahata, Koji; Daimon, Shin-ya

Estimating the spatial distribution of environmental noise levels from a small sample
pp. 2053-2059(7)
Author: Wu, Shuoxian

A method of reasoning which discovers general noise rating scales from particular words acquired with internet search engine for sampling
pp. 2060-2067(8)
Authors: Furihata, Kenji; Yanagisawa, Takesaburo

Excited vibration frequency detection of the latticed fence structure using a fiber optic sagnac sensor
pp. 2068-2075(8)
Author: Lee, Jongkil

Comparing noise zoning experience in municipalities of several Italian cities
pp. 2076-2083(8)
Author: Ventura, Francesco

Sound quality evaluation of booming noise in passenger cars
pp. 2084-2089(6)
Authors: Shin, Sung-Hwan; Ih, Jeong-Guon; Byun, Uhn-Suh; Kang, Koo-Tae

The effect of vehicle's interior noise on driver's psychological characteristic
pp. 2090-2095(6)
Authors: Jian, Ou; Hong, Luo

The interfering effect on an auditory task on performance of a visuo-motor task
pp. 2096-2100(5)
Authors: Miyazono, Hiromitsu; Hashiguchi, Tomonori; Chisaki, Yoshifumi; Usagawa, Ysuyoshi

Speed and RPM controlled changes of speech intelligibility: A new computerized method for measuring the communicative quality of car interior sound
pp. 2101-2104(4)
Authors: Bisping, Rudolf; Thoma, Gerhard

An index for motor vehicle passengers acoustical comfort
pp. 2105-2118(14)
Authors: Rossi, Federico; Nicolini, Andrea; Filipponi, Mirko

Subjective evaluation of car interior sound on different road surfaces
pp. 2119-2125(7)
Authors: Yu, Wuzhou; Mao, Dongxing; Wang, Zuomin

Enhanced aircraft flight test data exploitation by operational modal analysis
pp. 2126-2133(8)
Authors: Peeter, Bart; Vecchio, Antonio; Van der Auweraer, Herman

Modal parameters from a wind turbine wing by operational modal analysis
pp. 2134-2141(8)
Authors: Gade, Svend; Moller, Nis B.; Herlufsen, Henrik

FEM updating using ambient vibration data from a 48-storey building in Vancouver, British Columbia, Canada
pp. 2142-2149(8)
Authors: Lord, Jean-Francois; Ventura, Carlos E.; Dascotte, Eddy; Brincker, Rune; Anersen, Palle

Mode shape scaling by mass changes
pp. 2150-2156(7)
Authors: Brincker, Rune; Andersen, Palle; Gade, Svend

Dynamic characteristics and seismic response of adjacent steel frames linked by discrete elastic dampers
pp. 2157-2162(6)
Authors: Bae, Chun Hee; Cho, Chul-Hwan; Yang, Kyeong-Hyeon; Park, Young-Pil

Model updating using the closed-loop modal data: Application to indeterminate structure
pp. 2163-2170(8)
Authors: Jung, Hunsang; Park, Youngjin

Analysis of modal characteristics of subframe with dynamic vibration absorber
pp. 2171-2178(8)
Author: Yoo, Dong Ho

Modal analysis of two identical rectangular plates coupled with water
pp. 2179-2186(8)
Authors: Yoo, Gye-Hyoung; Jeong, Kyoung-Hoon; Lee, Seoug-Cheol

Approaches to patch NAH
pp. 2187-2194(8)
Author: Williams, Earl G.