INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Development of new industrial standard for measurement of noise emitted by very small air-moving devices
pp. 1-6(6)
Author: Kimizuka, Ikuo

The airflow and acoustic performance of current 92 mm system fans
pp. 7-12(6)
Author: Beltman, Willem M.

Noise reduction and performance enhancement in centrifugal fan by improving outlet angle of impeller
pp. 16-22(7)
Authors: Minorikawa, Gaku; Hirano, Toshiyuki; Suzuki, Shoji; Mizuki, Shimpei

The role of lubricant in reducing vibration and noise in refrigeration compressors
pp. 23-33(11)
Authors: Dekleva, Thomas W.; Thompson, R. Ian G.; Boyde, Stephen; Randles, Steve; McTavish, Stuart

Estimating sound radiation from refrigerant compressor housing using vibration measurements
pp. 34-38(5)
Author: Marshall, Steven E.

An evaluation of the effects of different Portland cement concrete pavement texturing on tire/pavement noise
pp. 39-48(10)
Authors: Donavan, Paul R.; Scofield, Larry

Insultech acoustic blanket insulation
pp. 49-54(6)
Author: Kovacs, Frank

Environmental noise control techniques for air cooled chillers
pp. 55-59(5)
Author: Depies, Chris R.

The control of computer and portable equipment noise in classrooms
pp. 60-65(6)
Authors: Hellweg, Robert D.; Dunens, Egons K.; Baird, Terry

Challenges in designing covers for high-end computer systems: Meeting acoustical and thermal requirements
pp. 66-75(10)
Authors: Shaw, Jennifer A.; Cruz, Ethan E.

Requirments for information technology and telecommunications equipment noise
pp. 76-83(8)
Authors: Hellweg, Robert D.; Baird, Terry

Prediction of computer cooling fan noise using a 3D unsteady flow solver
pp. 84-93(10)
Authors: Huang, L.; Zou, Z.P.; Xu, L.

Reverberation chamber sound power measurement of sources with discrete-frequency noise emissions
pp. 94-100(7)
Author: Xu, Yanchu

PC acoustics: The case for workload and environment based targets
pp. 101-110(10)
Authors: Dunstan, Bob; Gabel, Doug; Laney, Cliff

Optical drive performance and emitted airborne noise
pp. 111-116(6)
Author: Dunens, Egons K.

Study and reduction of noise from a pneumatic nail gun
pp. 117-122(6)
Authors: Hicks, Daniel A.; Vu, Kha; Rao, Mohan D.

Measuring the noise levels and identifying the primary noise sources of a commercial table saw
pp. 123-127(5)
Authors: Bleedorn, Kristen; Mathison, Margaret; McKee, Matthew; Satterly, Ryan; Yarbough, Dale; Yu, Chen; Zechmann, Edward L.; Mann, J. Adin

Noise control of hand-held power tools
pp. 128-136(9)
Authors: Suh, Sanghoon; Mongeau, Luc

Noise transmission study of a table saw
pp. 137-143(7)
Authors: Spruit, Matthew J.; Holt, John G.; Boyer, Laura M.; Bernard, Andrew R.; Dayton, Wendell B.; Rao, Mahon D.

Impact of 2000/14/EC on transport refrigeration equipment: Competitive cooperation and the development of ISO 20039
pp. 144-149(6)
Author: Gleason, Steve

Evaluation of engineering noise controls for a continuous miner conveyer system
pp. 150-160(11)
Authors: Durr, T. Michael; Koralchik, Peter; Kwait, Ed

Tire construction and pavement texture effects upon tire/pavement noise generation and radiation
pp. 161-167(7)
Authors: Thornton, William D.; Baumann, Jonathan M.; Bernhard, Robert J.

Measurement of automobile tire tread vibration and radiated noise
pp. 168-173(6)
Authors: Dugan, Erin L.; Burroughs, Courtney B.

Engineering measures for noise abatement of mine vent fans and ductwork
pp. 174-183(10)
Authors: Leasure, Joshua; Tinianov, Brandon; Nakagawa, Masami

Noise reduction of a vaneaxial fane for a continuous mining machine
pp. 184-190(7)
Authors: Carter, Benjamin A.; Burroughs, Courtney B.; Armour, Dan

Estimated sound power radiated by surfaces on a continuous miner tail section using vibration measurements
pp. 191-199(9)
Author: Yantek, David S.

Predicting the external noise from multiple spargers in an air-cooled condenser power plant
pp. 200-207(8)
Authors: Mann, J. Adin; Fagerlund, Allen; DePenning, Chales; Catron, Fred; Eberhart, Richard; Karczub, Denis

Issues in using ray-tracing software for predicting community noise from power plants
pp. 208-217(10)
Authors: Brittain, Frank; Hale, Marlund

Issues in predicting performance of ducts and silencers used in power plants
pp. 218-226(9)
Authors: Cummins, Jim R.; Causey, Jim B.

Power plant noise emission testing procedures
pp. 227-236(10)
Author: Derrick, Mark

Sound radiation from large air-cooled condensers
pp. 237-243(7)
Author: Bradley, Wayne E.

Control of low-frequency noise and vibration in combustion turbine exhausts by specifically designed vanes in the exhaust
pp. 244-252(9)
Author: Norris, Thomas R.

Testing and noise control for FCF project fluids and combustion facility (FCF): FIR and CIR
pp. 253-261(9)
Authors: Douzos, George G.; Krejsa, Gene; Young, Judy

Acoustic suppression associated with application of Chevrons to the trailing edge of a supersonic nozzle
pp. 262-271(10)
Authors: Seiner, John; Ukeiley, Larry; Jansen, Bernie

Aeroacoustics of propulsion airframe integration: Overview of NASA's research
pp. 272-279(8)
Author: Thomas, Russell H.

Internal jet noise prediction for nozzles with mixed flows - An emerging topic
pp. 280-290(11)
Author: Mengle, Vinod G.

Computational methods for the prediction of jet noise
pp. 291-302(12)
Author: Hixon, Ray

Control of jet noise through mixing enhancement
pp. 303-312(10)
Authors: Bridges, James; Wernet, Mark P.; Brown, Cliff

Computation of jet screech noise
pp. 313-321(9)
Authors: Hultgren, Lennart S.; Loh, Ching Y.

Numercial and experimental determination of the geometric far field for round jets
pp. 322-330(9)
Authors: Koch, L. Danielle; Bridges, James; Brown, Clifford; Khavaran, Abbas

Simulating nonlinear stator noise for active control
pp. 331-339(9)
Authors: Dyson, Rodger W.; Hixon, Ray; Nallasamy, M.; Sawyer, Scott

Sound transmission through lined, composite fuselage structures: Formulation of anisotropic poroelastic theory
pp. 340-345(6)
Authors: Kim, Jeong Woo; Bolton, J. Stuart

Design for room absorption and reverberation time per ANSI S12.60-2002
pp. 346-351(6)
Author: Tinianov, Brandon

The reduction of noise - By an artificial forest of artificial trees
pp. 352-358(7)
Author: Warnaka, Glenn E.

Tranpaerent noise barrier specification criteria
pp. 359-367(9)
Authors: Humphries, Eric; LaFoutaine, Grant

Insertion losses of resonant silencers combined with absorptive elements
pp. 368-374(7)
Authors: Weirich, Paul T.; Lewis, William

International space station acoustic noise control - Case studies
pp. 375-383(9)
Authors: Grosveld, Ferdinand W.; Goodman, Jerry R.

Spray applied acoustical plasters
pp. 384-385(2)
Author: Podolsky, Howard

Experimental techniques for evaluation of active noise reduction communication headsets with the Thayer low frequency acoustic test cell
pp. 386-393(8)
Authors: Collier, Robert D.; Kaliski, Kenneth H.; Ray, Laura R.

A case study of HVAC silencer application and selection to fit the duct system
pp. 394-402(9)
Author: Peterman, Karl L.

Active exhaust line for different kind of engine
pp. 403-409(7)
Authors: Carme, Ch.; Le Brazidec, F.; Vignassa, P.; Hansen, J.

Broadband active-passive control of small axial fan noise emission
pp. 410-420(11)
Authors: Homma, Kenji; Fuller, Chris; Man, Kaleen Xiuting

Broadband active-passive control of small axial fan noise emission
pp. 421-427(7)
Authors: Homma, Kenji; Fuller, Chris; Man, Kaleen Xiuting

Active control of multi-harmonic noise of engine cooling fan
pp. 428-437(10)
Authors: Berry, Alain; Gerard, Anthony; Masson, Patrice

Adaptive dithering of the input to a non-linear system to control harmonic output frequencies
pp. 438-447(10)
Author: Baumann, David

Active control of energy density in a mock cabin
pp. 448-453(6)
Authors: Faber, Benjamin M.; Sommerfeldt, Scott D.

Reference signal requirements for the feedforward control of sound transmission into a payload fairing
pp. 454-463(10)
Authors: Johnson, Marty; Sacarcelik, Ozar

Probabilistic modeling of mechanical joints
pp. 464-473(10)
Authors: Urbina, Angel; Paez, Thomas L.; Gregory, Dan L.; Resor, Brain R.

Test based microgravity analysis for the fluids and combustion facility
pp. 474-482(9)
Authors: McNelis, Mark E.; Yu, Albert Y.; Otten, Kim D.; Akers, James C.

Microgravity emissions laboratory testing of the light microscopy module control box fan
pp. 483-491(9)
Authors: McNelis, Anne M.; Samorezov, Sergey; Haecker, Anthony H.

Case studies of acoustical design of rooms for music instruction in schools
pp. 492-504(13)
Authors: Paek, Hyun; Siebein, Gary W.; Kim, Bumjun

The effect of barometric pressure on absorption: Experiments on commonly encountered samples and systems
pp. 505-514(10)
Authors: Tinianov, Brandon; Babineau, Francis

Acoustics of courtrooms in Portugal
pp. 515-530(16)
Authors: Carvalho, Antonio P.O.; Monteiro, Carlos A.

Education stakeholders and the ANSI standard for school acoustics
pp. 531-536(6)
Authors: Lubman, David; Sutherland, Louis C.

Acoustical comparisons of existing facilities and new facilities in a special education school
pp. 537-541(5)
Authors: Sieben, Gary W.; McGinnes, Courtney; Kim, Bumjun; Kim, Hyeong-seok; LoRang, Mark; Paek, Hyun

Multi-source noise reduction calculation for industrial spaces with uncertainties in source size and location
pp. 542-548(7)
Author: Panza, Michael J.

Spray-applied cellulose acoustic insulation
pp. 549-552(4)
Author: Walborn, Richard E.

Sixth graders research and resolve reverberation problems in the middle school cafeteria in Granville, Ohio
pp. 553-561(9)
Authors: Alter, Harry; Evans, Rebecca

Measurements of floor impact noise using a new impact ball
pp. 562-568(7)
Authors: Jeon, Jin Yong; Jeong, Jeong Ho

Using outside to inside transmission class measurements (OITC) in the design of a new school near an airport
pp. 569-575(7)
Authors: LoRang, Mark; Sieben, Gary W.; McGinnes, Courtney; Paek, Hyun

A design palette approach to aircraft noise reduction modifications at eight Seattle-area schools
pp. 576-580(5)
Authors: Noson, Dennis; Bruck, Daniel C; Writer, Joel

Case studies illustrating acoustic design guidelines for HVAC systems in schools
pp. 581-591(11)
Authors: Lilkendey, Robert M.; Siebein, Gary W.; McGinnes, Courtney

Multi-modal noise assessment at the United States Department of Transportation: An overall perspective
pp. 592-594(3)
Author: Konheim, Arnold G.

Noise in Illinois: The human factor
pp. 595-598(4)
Authors: Zak, Greg; Zak, Pat

Development of a multi-modal noise model
pp. 599-602(4)
Authors: Fleming, Gregg G.; Boeker, Eric R.

A field study of aircraft noise impacts on an airport zone school district
pp. 603-609(7)
Authors: Bruck, Daniel C.; Noson, Dennis; Park, Ioana

A typical case study of school sound insulation
pp. 610-618(9)
Authors: Ehrlich, Gary E.; Gurovich, Yuri

Problems in equating in SEL of rotary and fixed wing aircraft in noise maps of military airfields
pp. 619-622(4)
Author: Luz, George A.

The community role in developing efficient, effective, and attractive highway noise barriers
pp. 623-628(6)
Authors: Burge, Paul; Doolittle, Thomas R.

Issues in determining the sound power levels of gas turbine exhausts
pp. 629-636(8)
Author: Parzych, David

Intermittent loud sounds from power plants
pp. 637-645(9)
Authors: Mahoney, Dan; Wood, Eric W.

Acoustical design margins: Uncertainty in prediction and measurement of community noise from power plants
pp. 646-656(11)
Author: Putman, Robert A.

Shipboard habitability noise criteria
pp. 657-667(11)
Authors: Fischer, Raymond; Gahs, Thomas P.

Shipboard noise prediction program - JERICHO
pp. 668-677(10)
Authors: Boroditsky, Leo; Fischer, Raymond; Yankaskas, Kurt

Using otoacoustic emissions to assess cochlear function in ISS noise
pp. 678-685(8)
Authors: Buckey, Jay C.; Alvarenga, Donna L.; Abel, Sharon M.; Crabtree, R. Brian; Musiek, Frank

Design of an acoustic muffler prototype for an air filtration system inlet on International Space Station
pp. 686-694(9)
Authors: Grosveld, Ferdinand W.; Goodman, Jerry R.

Preparing for flight - The process of assessing the ISS acoustic environment
pp. 695-704(10)
Authors: Allen, Christopher S.; Goodman, Jerry R.

Overview of hearing conservation programs for the International Space Station and NASA flight personnel
pp. 705-711(7)
Authors: Danielson, Richard W.; Stevens, Christina R.

International Space Station acoustics
pp. 712-722(11)
Author: Goodman, Jerry R.

A new best practice for hearing conservation: The Exposure Smart Protector (ESP)
pp. 723-732(10)
Authors: Burks, J. Alton; Michael, Kevin L.

Testing, evaluation, and design support of the minus eighty-degree laboratory freezer (MELFI) payload rack
pp. 733-741(9)
Authors: Tang, Punan; Goodman, Jerry; Allen, Christopher S.

ISS Human Research Facility (HRF) acoustics
pp. 742-751(10)
Authors: Phillips, Eric N.; Tang, Punan

ISS acoustics mission support
pp. 752-757(6)
Author: Pilkinton, Gregory D.

Case study: Four University Law Lecture Auditoria renovated for improved acoustics
pp. 758-765(8)
Authors: Knight, Sarah B.; Evans, Jack B.

Variation of HDD sound quality metrics over a sound power microphone array
pp. 766-771(6)
Author: Baugh, Eric

The colours of urban noise: A new concept of monitoring
pp. 772-776(5)
Authors: Didier, Dufournet; Adam, Rozwadowski

Sound quality metric development for the air conditioning and refrigeration institute
pp. 777-786(10)
Authors: Hodgdon, Kathleen K.; Peters, Jonathan A.; Burkhardt, Russell C.; Atchley, Anthony A.

Noise assessment metrics and criteria in a United States Department of Transportation multi-modal noise model
pp. 787-791(5)
Author: Schomer, Paul

High-frequency array using micro-machined optical mirophones
pp. 792-799(8)
Authors: Degertekin, F. Levent; Cunefare, Kenneth A.

Military aircraft interior in-flight noise measurement system
pp. 800-805(6)
Authors: Mobley, Frank; Darkow, David

A computer-based acoustical measurement system for NASA Glenn Research Center
pp. 806-812(7)
Author: Nelson, David A.

Noise emission testing requirements for spaceflight hardware
pp. 813-820(8)
Author: Nelson, David A.

Far-field noise surveys using a GPS receiver
pp. 821-827(7)
Author: Bahtiarian, Michael

Operating deflection patterns under non-stationary order related forces
pp. 828-838(11)
Authors: Batel, Mehdi; MacMillan, Brian; Herlufsen, Henrik; Marroquin, Marc

Practical considerations in reconstucting the surface vibration using inverse numerical acoustics
pp. 839-844(6)
Author: Martinus, Ferdy

Design and implementation of an automated intensity scanning system at the Acoustical Testing Lab at the NASA Glenn Research Center
pp. 845-850(6)
Authors: Dix, Gordon; Gee, Kent L.; Sommerfeldt, Scott D.

The design of a quality system to suppor NASA Glenn Research Center Acoustical Testing Laboratory
pp. 851-859(9)
Author: Schmitt, Jeff G.

A square wave shock generator's design and its performance analysis
pp. 860-866(7)
Author: Tang, Punan

Sound sources for anechoic chamber qualification
pp. 867-876(10)
Authors: Saussus, Patrick; Cunefare, Kenneth A.

Challenges in acoustic testing of ISS payloads: Lessons learned at the NASA Glenn Research Center Acoustical Testing Laboratory
pp. 877-884(8)
Authors: Akers, James C.; Passe, Paul J.; Cooper, Beth A.

Design and instrumentation of a large reverberation chamber
pp. 885-892(8)
Authors: Peterson, Jeffrey Shawn; Bartholomae, Roy C.

New acoustic test chambers at Georgia Tech
pp. 893-896(4)
Authors: Biesel, Van B.; Cunefare, Kenneth A.

Broadband compact absorber treatments for acoustic wind tunnels and test cells
pp. 897-908(12)
Authors: Brandstatt, Peter; Fuchs, Helmut V.; Lecheler, Alexander

Modeling folded beam waveguide absorber behavior using translational and rotational degree of freedom frequency response function coupling
pp. 909-918(10)
Authors: Munro, Andrew D.; Hambric, Stephen A.

The concept of "SuperSub" in object-oriented SEA modeling (OO-SEA)
pp. 919-927(9)
Author: Onsay, Sebnem

The calculation of fill factor effects in modern SEA analysis
pp. 928-935(8)
Author: Kaminsky, Cliff

Vibroacoustic analysis and experimental validation of the structural responses of NASA Mars Exploration Rover Spacecraft due to acoustic launch load
pp. 936-944(9)
Author: Hwang, Ho-Jin

20-40-60 dB rule for evaluation of engine noise reduction in SEA models
pp. 945-951(7)
Authors: Sanderson, Michael; Onsay, Taner

BEM analysis of packed silencers with layered bulk-reacting materials
pp. 952-957(6)
Authors: Cheng, C.Y.R.; Wu, T.W.

Partial sound field decomposition in multi-reference nearfield acoustical holography by using optimally-located virtual references
pp. 958-964(7)
Authors: Kim, Yong-Joe; Bolton, J. Stuart

Acoustical modeling of tensioned, permeable membranes
pp. 965-970(6)
Authors: Song, Jinho; Bolton, J. Stuart

Music teachers noise exposure survey
pp. 971-980(10)
Authors: Behar, Alberto; MacDonald, Ewen; Lee, Jason; Cui, Jie; Kunov, Hans; Wong, Willy

American standards activities in noise and their relationship to ISO standards
pp. 981-987(7)
Authors: Hellweg, Robert D.; Schomer, Paul D.

America's current noise policy - Success or failure?
pp. 988-993(6)
Authors: Lang, William W.; Beranek, Leo L.

Civilianizing of the Army's noise hazard measurement standard
pp. 994-997(4)
Author: Sachs, Felix Z.

A proposal for an industry group program for product noise declarations
pp. 998-1007(10)
Author: Nobile, Matthew A.