INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Overview of I_INCE technical work
pp. 3-9(7)
Author: Daigle, G.A.

In I-INCE technical initiative #3 - Noise policies and regulations
pp. 10-15(6)
Authors: Tachibana, Hideki; Lang, William W

Road traffic and railway noise prediction
pp. 16-21(6)
Authors: Probst, Wolfgang; Huber, Bernd

Progress update on I-INCE technical initiative #6 - Community noise
pp. 22-25(4)
Author: Finegold, Lawrence S

The I-INCE technical initiative noise and reverberation control in classrooms
pp. 26-27(2)
Authors: Karabiber, Z; Lubman, D; Sutherland, L

The power of public participation
pp. 28-35(8)
Author: Burge, Paul L

Recommendations for an expanded environmental noise impact assessment and mitigation process
pp. 36-60(25)
Author: Finegold, Lawrence S

Quiet traffic - A joint effort of industry, academia, and agencies to reduce transportation noise
pp. 61-66(6)
Authors: Wurzel, Dietmar; Neise, Wolfgang

Rocket engine oscillation diagnostics
pp. 67-74(8)
Author: Nesman, Tom

Low noise design of electrical equipment
pp. 75-80(6)
Authors: Karjalainen, A; Kaivola, R; Tanttari, J; Avikainen, T

Objective metric for evaluation of full vehicle squeak and rattle performance
pp. 81-86(6)
Authors: Brines, Robert S; Weiss, Lesley; Stanley, G

Efficient 2D numerical method for reduction of BPF pressure pulsation and noise by optimization design of centrifugal pumps and ventilators
pp. 87-92(6)
Authors: Timushev, S.F.; Tourret, J

Coupled computation of meshing and bearings stiffnesses: Effect on Radiated gearbox noise
pp. 93-98(6)
Authors: Mayeux, F; Perret-Liaudet, J; Rigaud, E

Some aspects about gearbox vibration and noise variability induced by manufacturing uncertainties
pp. 99-104(6)
Author: Perret-Liaudet, J

An analysis of rear axle gear whine
pp. 104-110(7)
Authors: Cheng, Yuping; Lim, Teik C

Non linear effects on gear trains dynamics
pp. 111-118(8)
Authors: Cantone, L; Vivio, F; Salvini, P

Natural mode sensitivity of automobile transmission ring gear structure
pp. 119-124(6)
Authors: Tanna, Romil P; Lim, Teik C

Gear noise responses from a variety of applications - Modeling and expermentation
pp. 125-130(6)
Authors: Kartik, V; Houser, D.R.; Sorenson, J.D.

Identification of gear noise of industrial robots
pp. 131-135(5)
Authors: Lee, Jong-Moon; Kim, Dong-Hae

Exhaust fan noise control by speed in power and industrial plants: Technical and economical assessment
pp. 136-141(6)
Authors: Zindeluk, M; Medeiros, J.B.; Souza, A.P.; Feitera, J.F.S.

Prediction models showing effects of design parameters on induction machine cooling fan performance and sound power
pp. 142-147(6)
Author: Hyrynen, Johannes

Noise sources and solutions for mobile vacuum trucks
pp. 148-153(6)
Author: Cummins, Jim R

An application of the acoustic simularity law to the numerical analysis of centrifugal fan noise
pp. 154-159(6)
Authors: Jeon, Wan-Ho; Lee, Duck-Joo; Rhee, Huinam

Development of ISO 7779 1st amendment "Noise measurement specifications for CD- and DVD-ROM drives"
pp. 160-167(8)
Author: Kimizuka, Ikuo

Practical experiences in the treatment of pressure pulsation from oil-free screw compressors
pp. 168-173(6)
Authors: Lucas, M.J.; Rowe, D.F.

Experimental study on noise characteristics of dry pumps
pp. 174-179(6)
Authors: Cheung, Wan-Sup; Lim, Jong-Yeon; Chung, Kwang-Hwa

Effects of road texture on traffic noise and annoyance at urban driving speeds
pp. 180-186(7)
Authors: Dravitzki, Vincent K; Walton, Darren; Wood, C.W.B.

Tyre vibration analysis with conical waveguide finite elements
pp. 187-192(6)
Authors: Nilsson, C-M; Finnveden, S

Propagating wave formulation of tire vibrations using the orthotropic plate model
pp. 193-198(6)
Author: Hamet, Jean-Francois

Modeling of the rotating tire-contact patch interaction
pp. 199-204(6)
Authors: Molisani, L.R.; Burdisso, R.A.; Tsihlas, Dimitri

Application of operational analysis to a rolling tire noise prediction
pp. 205-210(6)
Authors: Tsujiuchi, N; Koizumi, T; Maeda, Y; Iwagase, T

Vehicle tire noise/vibration characteristic analysis using SEA (Statistical Energy Analysis)
pp. 211-216(6)
Authors: Chai, Jangbom; Kim, Yunchul; Kang, Kiseok; Lee, Sangju; Lee, Senugkyu

Tyre noise horn effect on an absorbing road surface - 2D analytical modelling using the multipole synthesis
pp. 217-222(6)
Author: Klein, Philippe

Sound field investigations around a tire
pp. 223-228(6)
Author: Saemann, E-U

A parameter study with the tyre-road noise simulation tool TRIAS
pp. 229-234(6)
Authors: van de Eerden, F.J.M.; Gerretsen, E; de Roo, F; Mulder, E.H.; Schoen, E.D.

A model for the acoustical optimization of porous road surfaces
pp. 235-240(6)
Authors: Hubelt, J; Sarradj, E; Lerch, Tobias

Examination of tire/road noise at frequencies above 630 hertz
pp. 241-248(8)
Author: Donavan, P.R.

Pavement/tire noise work in the United States
pp. 249-250(2)
Author: Wayson, Roger L

The influence of tire age and wear on tire/road noise emission
pp. 251-258(8)
Authors: Sandberg, Ulf; Ejsmont, Jerzy A

Response measurement of rolling tires using laser Doppler vibrometry
pp. 259-266(8)
Authors: Klos, Jacob; Han, Fei; Bernhard, Robert J

Effect of rotation on the vibration characteristics of tires
pp. 267-274(8)
Authors: Kim, Yong-Joe; Bolton, J. Stuart

Modelling of the origin of tribological noises - Application to a braking system
pp. 275-280(6)
Authors: Baillet, L; Berthier, Y; Laulagnet, B

Analysis of friction-induced vibration leading to eek noise in a dry friction clutch
pp. 281-288(8)
Authors: Wickramarachi, P; Singh, R

Curve squeal noise research programme for rail bound vehicles in the Netherlands
pp. 289-294(6)
Authors: van den Brink, J.W.; van Harren, E; de Beer, F.G.; Weener, J.J.

Full scale measurements in the Curve Squeal Noise research program
pp. 295-300(6)
Authors: van Haaren, E; van den Brink, J.W.; van Keulen, G.A.; Lefranc, B.R.J.

Vibro-acoustics of a break rotor with focus on squeal noise
pp. 301-306(6)
Authors: Lee, H; Singh, R

Burst mode dither control for the suppression of automobile brake squeal
pp. 307-313(7)
Authors: Dzirasa, M; Cunefare, K; Montbrun, M; Rastelli, V

A novel and efficient technique to rank aircraft brake judder levels at the design stage
pp. 313-316(4)
Author: Rook, Todd E

Brake noise data acquisition and analysis system
pp. 317-322(6)
Authors: Vadari, Vish; Niezgoski, John; Edgar, Dave; Elliot, Dan

Improved locomotive horn warnings with lower interior vehicle noise
pp. 323-326(4)
Author: Fann, Mike

Comparison of pile-driver noise and vibration from various pile-driving methods and pile types
pp. 327-332(6)
Authors: Greene, Rob; Pirie, Rachel; Greene, Mike

Design of a small quiet high performance PC system
pp. 333-340(8)
Authors: Xiuting, Kaleen; Man, C

Characterization and reduction of noise generated by small industrial power tools
pp. 341-348(8)
Authors: Fouts, B.E.; Kim, J; Hayden, C.S.

Identification of sound power source for noise reduction of the table saw
pp. 349-354(6)
Authors: Stockholm, J; Gray, C; Wesley, M

Vehicle noise status and characteristics
pp. 355-362(8)
Authors: Kang, Daejoon; Rhee, D.G.; Chang, S.K.; Seo, C.Y.; Park, J.C.

I-95 HOV re evaluation highway traffic noise impact analysis; Palm Beach County Florida
pp. 363-370(8)
Author: Kinney, Bernard I

Aircraft noise engineering - Issues and challenges
pp. 371-372(2)
Author: Collins, Dominique

Validation of source data and propagation algorithms for aircraft noise prediction
pp. 373-378(6)
Authors: Olsen, H; Randeberg, R.T.; Storeheier, S.A.; Granoien, I.L.N.; Ustad, A

Aircraft sound exposure, directivity and propagation
pp. 379-384(6)
Authors: Liasjo, Kare H; Holen, Knut; Nilsen, Nils Ivar

Measurements of blank tire tread vibration and radiated noise
pp. 385-392(8)
Authors: Burroughs, Courtney B; Dugan, Erin L

Robustness of powertrain mount system for idle NVH
pp. 393-398(6)
Authors: Qatu, M.S.; Sirafi, M.H.; Johns, F

On acoustic modeling and testing of Diesel particulate filters
pp. 399-404(6)
Authors: Allam, S; Abom, M

Robustness analysis of exhaust hanger location variation
pp. 405-410(6)
Authors: Pang, Jian; Qatu, Mohammad; Rebandt, Robert

Percentile frequency method and Zwicker loudness
pp. 411-416(6)
Author: Fridrich, Richard J

Determination of in-cab sound paths using sound intensity
pp. 417-422(6)
Authors: Moritz, Charles T; Kunio, Jason T

An effective NVH component cascade method for powerplant sound target setting
pp. 423-430(8)
Author: Zeng, Paul Webb

Tactic to control soundscape under the car chamber environment based on the ecoacoustics
pp. 431-436(6)
Authors: Bi, Chauanxing; Chen, Jian; Xu, Xiaojun

Motorcycle engine crankcase pressure induced roller bearing noise
pp. 437-442(6)
Authors: Senger, Anthony; Bozmoski, Alex

From experimental to virtual prediction of motorcycle vibrations
pp. 443-448(6)
Authors: Kuwahara, H; Fukui, Y; Mas, P; Vandenplas, B

Acoustic development of a new motorcycle platform
pp. 449-455(7)
Authors: Pierson, Richard; Bozmoski, Alexander

Noise control system for a specific urban transport bus model
pp. 456-461(6)
Authors: Zanartu, M; Fox, D.M.; Fuentes, E.A.

Localisation and analysis of the noise sources of a truck
pp. 461-466(6)
Authors: Pallas, M.A.; Doisy, S

Acoustic modeling and prediction process for a Diesel locomotive
pp. 467-472(6)
Authors: Anborn, I; Abmann, G; Hebel, A

Fly-over gives low-frequent noise, so train-speed must be reduced to 50 km/h to avoid complaints
pp. 473-478(6)
Author: Wijnia, Y.K.

Railway rolling noise calculations: WR noise program
pp. 479-484(6)
Authors: Neuville, S; Vanhonacker, P

A technique for discriminating ground-borne sound from airborne sound within buildings adjacent to railways
pp. 485-490(6)
Authors: Hardy, A.E.J.; Jones, R.R.K.

The cost and benefit functions in the STAIRRS project
pp. 491-496(6)
Authors: Lenders, Ande; Hecq, Walter

The STAIRRS project, work package 1: A cost-benefit analysis of railway noise reduction on a European scale
pp. 497-501(5)
Author: Oertli, Jakob

Measurement of the pressure distribution formed around a high-speed train
pp. 502-508(7)
Authors: Saito, Osamu; Doi, Tetsuya; Kaku, Jiro

Characterization of ground vehicles noise emission by pass-by tests using an 8-microphone array
pp. 509-514(6)
Authors: Pianna, E; Cousin, G; Armani, A; Beretta, G.P.

A noise control of a floating, production, storage and offloading (FPSO) vessel
pp. 515-519(5)
Authors: Kim, Dong-Hae; Chung, Kyoon-Yang

Vibro-acoustic optimal design of automotive interior systems
pp. 520-524(5)
Authors: Griffen, Christopher; Khambete, Surendra

Characterization of noise generation properties of friction material pairs
pp. 525-533(9)
Authors: Trapp, Martin A; Karpendo, Yuri A

Characterization of shaped PVDF sensors for the measurement of volume displacement
pp. 534-539(6)
Authors: Zeller, B; Rozema, R; Naghshineh, K

Theoretical analysis on noise induced by flame parcel
pp. 540-543(4)
Authors: Jiang, G.S.; Zhu, Y.B.; An, L.S.; Yang, K

Aero-acoustic simulation of a side mirror compared with experimental results
pp. 544-549(6)
Authors: Obrist, D; Nicolopoulos, D; Jacques, A

The influence of temperature and static pressure on the sound power of aerodynamic reference sound sources
pp. 550-555(6)
Authors: Wittstock, Volker; Bethke, Christian

Interior acoustical resonance of centrifugal compressors
pp. 556-561(6)
Authors: Takano, Yasushi; Kobayashi, Hiromi

Wiper blades and windshield influences on wiping aerodynamic noises
pp. 562-567(6)
Authors: Sanon, A; Jourdain, S; Rehfeld, M; Boure, J.P.

Power-based noise reduction technique and its application to SEA modeling
pp. 568-573(6)
Authors: Zhu, Jason; Zhang, Qijun; Parrett, Alan V; Hammelef, David M

Flanking transmission of continuous ground plates
pp. 574-581(8)
Author: Brunskog, Jonas

Experimental study of sound transmission loss in electrorheological liquid under stress developed by DC voltage
pp. 582-587(6)
Authors: Szary, Marek L; Noras, Maciej

Thermal energy dissipation in wave propagation over a stratified moving medium
pp. 588-593(6)
Authors: Solana Quiros, P.E.; Picard Lopez, M.A.; Moreno Esteve, J.C.; Martinez Rodriquez, D; Arizo Serrulla, J.V.

An approach to the calculation of the sound propagation in real atmosphere
pp. 594-599(6)
Authors: Solana Quiros, P.E.; Picard Lopez, M.A.; Moreno Esteve, J.C.; Marinez Rodriguez, D; Arizo Serrulla, J.V.

Quantifying public address system performance in a public transit environment
pp. 600-609(10)
Authors: Kelsall, T; Fitzmaurice, M

Designing PVB interlayer for laminated glass with enhanced sound reduction
pp. 610-617(8)
Author: Lu, Jun

Computational modeling of noise control materials
pp. 618-623(6)
Authors: Raveendra, S.T.; Sureshkumar, S; Hong, K.L.

Passenger vehicle interior noise reduction by laminated side glass
pp. 624-631(8)
Author: Lu, Jun

Experimental validation of a model for barrier noise attenuation
pp. 632-637(6)
Authors: Swart, W.J.R.; Odijk, M; Jabben, J

Modeling the performance of noise barriers with complex top geometries
pp. 638-643(6)
Authors: Yoo, Taewook; Mongeau, Luc; Bolton, J. Stuart