INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Product sound quality: From preception to design
pp. 3-8(6)
Author: Lyon, Richard H

Noise control engineering for the airport railway in Hong Kong
pp. 9-14(6)
Author: Frommer, Glenn

A case study evaluation of the Rayleigh integral method
pp. 15-20(6)
Authors: Herrin, D.W.; Wu, T.W.; Seybert, A.F.; Martinus, F

Forcing function models for structures excited by low-speed flow
pp. 21-26(6)
Authors: Hwang, Y.F.; Hambric, Stephen A

A computational approach for flow-acoustic coupling in quarter-wave resonators
pp. 27-30(4)
Authors: Radavich, Paul M; Novak, James M; Selamet, Ahmet

Wall pressure fluctuations due to boundary-layer transition
pp. 31-36(6)
Authors: Lauchle, Gerald C; Park, Sewon

Hybrid active/passive control of sound radiation from panels with constrained layer damping and model predictive feedback control
pp. 37-42(6)
Authors: Cabell, Randolph H; Gibbs, Gary P

Incorporation of sliding mode control into a vibration and noise suppression scheme for a rigid rotor
pp. 43-48(6)
Author: Lewis, A. Scott

Active increase of sound transmission loss in vehicles based on utilizing EMFi panel actuators
pp. 49-54(6)
Authors: Nykanen, Hannu; Antila, Marko; Lekkala, Jukka; Necati, Gorgun

Robust active control of a vibrating plate
pp. 55-60(6)
Authors: Prajna, Stephen; Kaiser, Oliver E; Pietzko, Stanislaw J; Morari, Manfred

Active control of rotating shafts using modal separation
pp. 61-64(4)
Authors: Swanson, D.C.; Kim, B

Robust control of sound in an active acoustic grillage
pp. 65-70(6)
Authors: Sepp, Kalev; Vagners, Juris

Modeling the normal modes and acoustics of a jet engine
pp. 71-76(6)
Authors: Ireland, Laralee G; Sommerfeldt, Scott D

Correlations in fuselage response and sound field in aircraft cabin during flight
pp. 77-82(6)
Authors: Mathur, Gopal P; Tran, Boi N; Simpson, Myles A

Evaluation of efficient passive damping treatments for aircraft cabin noise control
pp. 83-88(6)
Authors: Mathur, Gopal P; Lee, Joshua T; Simpson, Myles A

The community impact of rogue transportation sources
pp. 89-94(6)
Authors: Zimmer, I.B.; Wilson, C.E.; Dresnack, R

Pump station noise and vibration in a residential development
pp. 95-100(6)
Author: Towers, David A

Strategies to evaluate aircraft routing plans at Newark International Airport
pp. 101-106(6)
Authors: Dresnack, R; Zimmer, I; Wilson, C

Assessing the community impact of aircraft noise
pp. 107-112(6)
Authors: Wilson, Charles E; Dresnack, Robert; Zimmer, Ithan B

Low-frequency aircraft noise and its effects on residential land use
pp. 113-118(6)
Author: Harris, Andrew S

30 years of traffic nosie problems and countermeasures taken in greater Cairo, Egypt
pp. 119-126(8)
Authors: Ali, S.A.; Tamura, A

Air handler sound power prediction method based on ARI standard 260P
pp. 127-132(6)
Author: Lind, Stephen

Condenser fan noise reduction solutions
pp. 133-136(4)
Author: Bobeczko, Michael S

Estimating community noise levels from outdoor condensing units
pp. 137-142(6)
Authors: Kim, Hyeong-seok; Siebein, Gary W

Determination of insertion loss for classrooms at a high school
pp. 143-148(6)
Author: Green, Michael G

A finite element analysis of a smart foam system for passive/active noise control
pp. 149-154(6)
Authors: Chin, Cliff L; Lee, Joshua T; Mathur, Gopal P

Properties and applications of novel acoustical foam
pp. 155-160(6)
Authors: Drzyaga, Mae; Subramonian, Suresh; Schroer, Dan; Remy, Laurent; Gilg, Sandrine; Park, Chung

Elimination of structure-borne noise using an insulating material made from recycled rubber
pp. 161-166(6)
Authors: Downey, P; Guecker, K.H.

Geometric sound absorbers
pp. 167-172(6)
Author: Warnaka, Glenn E

Wideband transmission noise reduction of smart panels featuring piezoelectric shunt circuits and sound absorbing material
pp. 173-178(6)
Authors: Kim, Jaehwan; Lee, Joong-Kuen; Choi, Jin-Young

Dynamic insertion loss measurements of duct silencers at low frequencies
pp. 179-184(6)
Authors: Lilly, Jerry G; Partain, James D

Research into quality assessment methods for anechoic chambers
pp. 185-190(6)
Authors: Babineau, Francis J; Tinianov, Brandon D

Design and construction of a convertible hemi/anechoic acoustical laboratory for testing space flight hardward at the NASA Glenn Research Center
pp. 191-194(4)
Author: Cooper, Beth A

Noise and vibration isolation design for a vibration testing laboratory
pp. 195-200(6)
Authors: Nelson, David A; Stewart, Thomas

The cylindrical microphone array: A proposal for use in international standards for sound power level measurements
pp. 201-206(6)
Authors: Nobile, Matthew A; Donald, Brian; Shaw, Jennifer A

Method for evaluating the attenuation of acoustical covers used in high-end computer systems
pp. 207-212(6)
Authors: Shaw, Jennifer A; Donald, Brian; Nobile, Matthew A

Computer sound quality: Masking, loudness and prominence
pp. 213-218(6)
Authors: Nelson, David A; Balant, Anne C

Regulation of amplified sound sources
pp. 219-224(6)
Author: Zwerling, Eric M

Verification of sound levels inside discotheques and public show sites
pp. 225-229(5)
Author: Curcuruto, S

Rotorcraft noise model (RNM) and acoustic repropagation technique (ART2) validation and application using CH-146 (Bell 412) measurement data
pp. 230-235(6)
Authors: Page, Juliet; Downing, Micah

Field measurements of a reduced-scale noise barrier's insertion loss and absorption coefficients
pp. 236-241(6)
Authors: Busch, Todd A; Nugent, Ramon E

A correction to Maekawa's curve for the insertion loss behind noise barriers
pp. 242-247(6)
Author: Menounou, P

Random and periodic square wave barriers in noise control
pp. 248-253(6)
Authors: Sarigul-Klijn, Nesrin; Karnopp, Dean

Sound quality of exterior vehicle noise
pp. 254-259(6)
Author: Genuit, K

Factors moderating the effect of noise barriers
pp. 260-263(4)
Authors: Meloni, Tommaso; Fischer, Fredy

Quiet areas and "Quiet Facades" - Important elements in the EU noise policy
pp. 264-269(6)
Author: Kihlman, Tor

Measurement of the natural soundscape in national parks
pp. 270-275(6)
Authors: Downing, Micah; Stusnick, Eric

Measurement and modeling of snowmobile noise and audibility at Yellowstone and Grand Teton national parks
pp. 276-281(6)
Authors: Menge, Christopher W; Ross, Jason C

The application of a noise-rating scale composed of hue-scale and LAeq on various kinds of noise sources for noise map
pp. 282-289(8)
Authors: Furihata, K; Yanagisawa, T

Methodology for analyzing perceptual criteria of urban soundscape
pp. 290-295(6)
Author: Raimbault, Manon

Noise control engineering challenges in designing plants to meet noise limits
pp. 296-301(6)
Author: Putnam, R

Using a prediction model to allocate allowable noise between sources and establish equipment noise limits
pp. 302-307(6)
Author: Parzych, David J

Integrating noise controls into the power plant design
pp. 308-313(6)
Author: Bradley, Wayne E

Interaction of noise control engineering with the real-world design process
pp. 314-319(6)
Author: Hale, Marlund E

Risks in designing power plants to meet noise limits and how to manage them
pp. 320-327(8)
Author: Brittain, Frank H

Strategy for writing procurement specifications
pp. 328-331(4)
Author: Hessler, George F

Customer sound criteria and vendor acoustical performance guarantees: The difficulties of meeting the first and verifying the second
pp. 332-339(8)
Author: Johnson, R.S.

Active control of low frequency turbine exhaust noise
pp. 340-349(10)
Authors: Walker, Bruce E; Hersh, Alan S; Celano, Joseph W; Ray, Elden F

Certifying noise emissions from heat recovery steam generators (HRSG) in complex power plant environments
pp. 350-355(6)
Author: Hessler, George F

Determination of sound pressure levels in situ using sound intenstiy measurements
pp. 356-361(6)
Authors: Keith, S.E.; Krishnappa, G; Chiu, V

Diagnostics of vibration excitation mechanisms for complex hydro-mechanical systems
pp. 362-367(6)
Authors: Lenchine, V.V.; Prokofiev, A.B.; Shakhmatov, E.V.

Noise control and the machineray safety standardization programme of CEN (European Standardization Committee)
pp. 368-371(4)
Authors: Jacques, J; Higginson, R; Kurtz, P

Noise impact from motor racing events
pp. 374-379(6)
Author: Curcuruto, S

Problems of evaluation of long-term levels for Corona noise
pp. 380-385(6)
Author: Wszolek, Tadeusz

Assessment of annoyance in a multi-source environment
pp. 386-389(4)
Author: Gjestland, Truls

What can classical and fuzzy concepts contribute to the analysis of masking effects in environmental noise surveys?
pp. 390-395(6)
Authors: Botteldooren, D; Verkeyn, A; Lercher, P

Recent development in European noise legislation concerning construction equipment
pp. 396-401(6)
Author: Irmer, Volker K.P.

Railway construction in Hong Kong: How to make it work
pp. 402-405(4)
Author: Frommer, Glenn

Legislation concerning construction noise in Germany
pp. 406-409(4)
Authors: Ali, Eberhard Fischer-Sheikh; Irmer, Volker K.P.

Demonstration hearing conservation program for construction workers in Washington state
pp. 410-413(4)
Author: Suter, Alice H

Tyre-pavement noise active control system: A laboratory prototype performance
pp. 414-419(6)
Author: Rossi, Federico

High temperature quiet-flow test facility
pp. 420-423(4)
Authors: Cummins, Jim R; Causey, Jim B; Kapsos, David W

Sound transmission loss of bulb seals
pp. 424-429(6)
Authors: Park, Junhong; Mongeau, Luc G; Siegmund, Thomas

MAGLEV - A super fast train
pp. 430-435(6)
Author: Gharabegian, Areg

Noise emission, friction and rolling resistance of car tires - Summary of an experimental study
pp. 436-447(12)
Authors: Sandberg, Ulf; Ejsmont, Jerzy A

The effect of damping of the disc brake squeal noise
pp. 448-453(6)
Authors: Shin, Kihong; Oh, Jae-Eung; Brennan, Mike J; Kim, Wootaek

An auditory model for the prediction of detection thresholds of impulsive sound events
pp. 454-459(6)
Authors: Amman, Scott; Blommer, Mike; Greenberg, Jeff

Active structural acoustic control of radiated sound from the vibrating plate
pp. 460-465(6)
Authors: Hong, Jin-Seok; Kim, Heung-Seob; Lee, Choong-Hwi; Oh, Jae-Eung

An improved broadband active noise compressor
pp. 466-469(4)
Authors: Lan, Hui; Zhang, Ming; Ser, Wee

Measurements of orifice impedance with grazing flow
pp. 470-475(6)
Authors: Dickey, N.S.; Selamet, A; Ciray, M.S.

Measuring the noise attenuation of shotblasting helmets
pp. 476-487(12)
Authors: Patel, Jacqueline; Irving, Frank

Computational evaluation of satellite equipment panel modal densities and radiation efficiencies
pp. 488-493(6)
Authors: Conlon, S.C.; Hambric, S.A.

Differences in performance with different background sound and ambient noise in three open office plans
pp. 494-499(6)
Author: Yoon, Heakyong C

Active underwater acoustic cancellations with pressure sensor and piezo-composite transducer
pp. 500-503(4)
Authors: Zhang, J.M.; Chang, W; Varadan, V.K.; Varadan, V.V.