INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Noise control by design in the 21st century - An architectural acoustics perspective
pp. 3-8(6)
Author: Marshall, A. Harold

A perspective on noise control technology and its future implementation
pp. 9-14(6)
Author: Sharp, Ben H

Computer online noise control engineering courses
pp. 15-20(6)
Authors: Burroughs, Courtney B; Rose, William M

Acoustics education in architecture
pp. 21-24(4)
Author: Karabiber, Zerhan

The ABC's of noise control materials
pp. 25-28(4)
Author: Moritz, Charles T

The global noise control marketplace for the new millenium
pp. 29-30(2)
Author: Brooks, Bennett M

Window sound proofing for construction noise at the central artery/tunnel project
pp. 31-36(6)
Authors: Fistel, Milt; Thalheimer, Erich

Abatement of traffic, vehicle and tire/road - The global perspective
pp. 37-44(8)
Author: Sandberg, Ulf

Non-obligatory methods of the acoustic assessment of machines used in Poland
pp. 45-50(6)
Authors: Pleban, D; Engel, Z

Sound pressure levels of musical instruments near an orchestral musician's ear and TTS measurement
pp. 51-54(4)
Authors: Aono, S; Takagi, K; Takinami, H

Noise emission form retreaded tires
pp. 55-60(6)
Authors: Ejsmont, J.A.; Sandburg, U; Taryma, S; Mioduszewski, P

Estimation of acoustical source strength of muzzle blasts on the basis of launch speed and bullet weight
pp. 61-64(4)
Author: Hirsch, Karl-Wilhelm

The diagnosis of planetary gear by means of vibration methods
pp. 65-70(6)
Authors: Lazarz, B; Wilk, A; Madej, H

The experimental investigations on sound emitted from drainpipes
pp. 71-76(6)
Authors: Yata, M; Hiramatsu, T; Kawaharazuka, T; Ohkawa, H; Koyasu, M

A "reduced-noise gas flow design guide" for NASA Glenn Research Center
pp. 77-82(6)
Authors: Nelson, David A; Cooper, Beth A

Analysis of automobile cooling fan noise using free-wake panel method and acoustic analogy
pp. 83-86(4)
Authors: Lee, Jeonghan; Cho, Kyungseok; Lee, Soogab

Recognition and diagnosing of the technical condition of an UHV transmission line using the acoustic signal of the Corona process
pp. 87-90(4)
Authors: Tadeusiewicz, R; Wszolek, T; Izworski, A; Wszolek, W

Attempt of the sound level evaluation for the Corona noise of UHV transmission lines in the intensified interference conditions
pp. 91-94(4)
Authors: Wszolek, T; Tadeusiewicz, R; Wszolek, W; Izworski, A

Analysis of the dynamic transfer matrices for two centrifugal pumps
pp. 95-100(6)
Authors: Bolpaire, S; Carta, R; Barrand, J-P; Caignaert, G; Charley, J

Engine bottom end design: A case study
pp. 101-106(6)
Authors: Cheng, Ming-Te; Rebandt, Bob

A case study of noise generation by an outdoor, cable driven tram
pp. 107-112(6)
Authors: Sevener, Nathan Bryce; Bui, Sean Khanh

Modeling of tire vibrations
pp. 113-118(6)
Authors: Campanac, P; Duhamel, D; Nonami, K

Horn amplification at a tyre/road interface - Part I: Experiment and computation
pp. 119-124(6)
Authors: Graf, R.A.G.; Kuo, C.Y.; Dowling, A.P.; Graham, W.R.

Horn amplification at a tyre/road interface - Part II: Ray theory and experiment
pp. 125-130(6)
Authors: Kuo, C.Y.; Graf, R.A.G.; Dowling, A.P.; Graham, W.R.

A high frequency range tyre model based on two coupled elastic plates
pp. 131-136(6)
Authors: Larsson, Krister; Kropp, Wolfgang

Tire noise reduction by using sound absorbing material
pp. 137-140(4)
Authors: Sakamoto, Ichiro; Tanaka, Takeharu; Murakami, Takayuki; Ogata, Seigo

Investigation on the possible causes of phenominal noise problem of a pump motor
pp. 141-146(6)
Authors: Audagnotto, Paulo; Oaturk, Cuneyt; Bahadir, Aydin; Okay, Lutfi

Pulsation damping of a vapor recovery system
pp. 147-150(4)
Author: Causey, Jim

The effect of brush dynamics on clothes washer motor noise radiation
pp. 151-156(6)
Authors: Ozturk, Cuneyt; Bahadir, Aydin; Tontsch, Klaus-Georg

Remediation of excessive power plant noise emissions
pp. 157-160(4)
Author: Ray, Elden F.

Prediction of turbo compressor noise
pp. 161-166(6)
Authors: Stirnemann, Alfred; Zogg, Hans; Stocker, Fritz

Effects of rotor slot opening modification on acoustic noise from induction machines
pp. 167-172(6)
Authors: Tenhunen, A; Arkkio, A

Aerodynamic noise generated from heat exchangers with a large inlet angle
pp. 173-176(4)
Authors: Yamada, Shoji; Sekiguchi, Kazunobu; Ikeda, Takashi

Quality and technical issues related to traceable measurements of acoustic noise emissions of computer and business equipment
pp. 177-182(6)
Author: Schmitt, Jeff G

On the helicopter noise: A case history
pp. 183-188(6)
Authors: Bisio, G; Magrini, U; Ricciardi, P

Reduction of airframe and installation noise
pp. 189-194(6)
Authors: Chow, L.C.; Lempereur, P; Mau, K

European cooperation on railway noise
pp. 195-198(4)
Authors: Hemsworth, Brian; Hubner, Peter

Generation mechanism of tire/road noise Part 2: Pipe resonance in tread groove of tire
pp. 199-202(4)
Authors: Koike, H; Fujikawa, T; Oshino, Y; Tachibana, H

Vehicle noise emission: Evaluation of tyre/road- and motor-noise contributions
pp. 203-208(6)
Author: Lelong, Joel

Noise directivity of vehicles on actual road
pp. 209-212(4)
Authors: Mori, Y; Fukushima, A; Uesaka, K; Ohnishi, H

Tire/road-noise trailer measurements with the close-proximity method under variation of accelerating and braking torque
pp. 213-218(6)
Authors: Olms, Hans; Breuer, Bert

Development of methods for understanding tyre/road noise generation and propagation
pp. 219-222(4)
Authors: Phillips, S.M.; Morgan, P.A.; Watts, G.R.

A directional factor from moving vehicles
pp. 223-228(6)
Authors: Solana Quiros, P.E.; Picard Lopez, M.A.; Arizo Serrulla, J.V.

Experimental analysis of aerodynamic noise radiated from simplified models on a flat base
pp. 229-232(4)
Authors: Sagawa, Akio; Matsuo, Jun

Application of neural networks to identification of mobile objects based on vibroacoustic signals
pp. 233-236(4)
Authors: Tadeusiewicz, Ryszard; Izworski, Andrzej; Wszolek, Wieslaw; Wszolek, Tadeusz

A study for generation factor of road traffic noise in Okinawa
pp. 237-242(6)
Authors: Tokashiki, T; Okiyama, F; Uchida, H; Takagi, N; Yamashita, Y

Dutch tyre-road noise emission model - Adjustments and validation
pp. 243-248(6)
Authors: de Roo, Foort; Gerretsen, Eddy; Hoffmans, Werner G.J.; Doelman, Niek J.

Objective analysis of passenger car interior noise quality as a basis for brand sound design
pp. 249-254(6)
Authors: Brandl, Franz K; Biermayer, Werner; von Hofe, Rudiger

Highway noise mitigration projects in the United States: A consultant's perspective
pp. 255-260(6)
Authors: Satanovsky, Alex; Jaeckel, John R

Reduction of vehicle power assisted steering noise
pp. 261-264(4)
Authors: Walsh, S.J.; Duscha, T.J.

Model-based reciprocity methods for measuring noise reduction of shielding measures for trains using mechanical substitution sources
pp. 265-270(6)
Authors: Geerlings, Alex C; Verheij, Jan W

Model-based reciprocity methods for measuring noise reduction of shielding measures for trains using acoustical substitution sources
pp. 271-276(6)
Authors: Geerlings, Alex C; Thompson, David J; Verheij, Jan W

Exposure to impulsive infrasound
pp. 277-282(6)
Authors: Lenzuni, Paolo; Sisto, Renata; Pieroni, Aldo

Noise and vibration problems in tram design
pp. 283-288(6)
Authors: Uhl, Tadeusz; Wszolek, Wieslaw; Wszolek, Tadeusz; Karpinski, Jan

Singing noise control of high speed passenger catamaran with hydrofoils
pp. 289-292(4)
Authors: Joo, Won-Ho; Bae, Jong-Gug; Chung, Kyoon-Yang

Sound quality analysis of artificial sounds generated by the automobile interior's sound simulator
pp. 293-296(4)
Authors: Okoshi, Masaru; Mukai, Hikari; Sasaki, Toru; Ohashi, Masanao; Ono, Takahiko

Predicting sound levels of gas turbines in the development phase
pp. 297-300(4)
Author: Johnson, R.S.

Improved acoustical analysis using normal derivative form of a Helmholtz boundary integral equation
pp. 301-308(8)
Author: Takano, Yasushi

Acoustical and vibrational problems in the passenger compartment of overland busses
pp. 309-312(4)
Author: Erhard, Christoph

Direct numerical simulations of heated shear layers acoustic radiation
pp. 313-318(6)
Authors: Fortune, V; Lamballais, E; Gervais, Y

Generation mechanism of tire/road noise, Part 1: Tire vibration caused by road roughness
pp. 319-322(4)
Authors: Fujikawa, T; Koike, H; Oshino, Y; Tachibana, Y

Prediction of structural vibration and sound radiation of plates excited by complex flows
pp. 323-328(6)
Authors: Han, F; Mongeau, L.G.; Bernhard, R.J.

Infrasound generated by a highway bridge
pp. 329-334(6)
Author: Kabayashi, Yoshimasa

Propagation and measurement of high energy impulsive sound (artillery sound)
pp. 335-340(6)
Authors: Maekawa, Z; Nakamura, A; Konishi, K; Nii, K

Acoustic source location in flow-excited quarter wave resonators
pp. 341-346(6)
Authors: Radavich, Paul M; Selamet, Almet; Novak, James M

Prediction of impact noise of lightweight floors, including the tapping machine
pp. 347-352(6)
Authors: Brunskog, Jonas; Hammer, Per

Case history: Elimination of flow-excited cavity tones in an industrial gas processing facility
pp. 353-358(6)
Authors: McConnell, James A; Dillon, John L

High acoustic pressure near resonance in an oscillating tube
pp. 359-362(4)
Authors: Chun, Young-Doo; Kim, Yang-Hann

Scaling of turbulent wall pressure fluctuations downstream of a rearward facing step
pp. 363-368(6)
Authors: Lauchle, Gerald C; Kargus, Walter A

The effect of sound generated in corrugated tubes on a bus ride and a noise control engineer
pp. 369-374(6)
Author: Gleason, Steven M

Explosion airblast propagation over flat terrain
pp. 375-380(6)
Author: Reed, Jack W

Comparison of different criteria and techniques coupled with SVD for the regularization of an ill-posed inverse problem in vibroacoustics
pp. 381-386(6)
Authors: Marquis-Favre, C; Hamzaoui, N; Boisson, C

Scale model experiment on sound radiation from tunnel mouth
pp. 387-392(6)
Authors: Tachibana, Hideki; Sakamoto, Shinichi; Nakai, Akihiko

Interpolation model for long-range propagation of shooting noise over heterogeneous ground
pp. 393-398(6)
Authors: Salomons, Erik M; van den Berg, Frank H.A.

Meteorological effects on outdoor sound propagation over grass-covered ground
pp. 399-402(4)
Authors: Imaizumi, H; Kunimatsu, S; Isei, T; Takahashi, Y; Hosaka, T

Coliseo - An efficient tool for room acoustics design by using a sound energy transition approach
pp. 403-408(6)
Authors: Bento Coelho, J.L.; Almeida, A.M.; Abreu, T; Fonseca, N

A prediction method for regenerated noise radiated by closely spaced elements in ventilation systems
pp. 409-412(4)
Authors: Mak, C.M.; Yang, J

Acoustic impedance of coupled tubes including viscothermal effects
pp. 413-418(6)
Authors: van der Eerden, F.J.M.; Tijdeman, H

Effect of circumferential edge constraint on the transmission loss of glass fiber materials
pp. 419-426(8)
Authors: Song, Bryan H; Bolton, J. Stuart; Kang, Yeon June

Noise control in a HVAC system to provide acoustic comfort to the neighbourhood
pp. 427-430(4)
Author: Belderrain, Maria Luiza Rocha

Novel solutions to industrial noise control problems
pp. 431-434(4)
Author: Cummins, Jim R

Computer-aided designing of passive noise control media: Current research and further perspectives
pp. 435-440(6)
Author: Kazmierczak, Jan

Effect of temperature on the noise radiated by supersonic jet with water injection
pp. 441-444(4)
Authors: Marchesse, Y; Gervais, Y; Foulon, Y

The use of image source in the prediction of reflection effects in parallel barriers
pp. 445-450(6)
Authors: Cheng, W.F.; Ng, C.F.

Noise shielding efficiency of barrier with multiple absorbing edge obstacle
pp. 451-454(4)
Authors: Fujiwara, Kyoji; Ishiduka, Takashi

Effects of the surface impedance on the insertion loss of noise barriers
pp. 455-460(6)
Authors: Iannace, G; Ianniello, C; Maffei, L; Romano, R

An experimental and theoretical study of a noise barrier in LECA
pp. 461-466(6)
Author: Samagaio, A

Simple method for calculating sound attenuation by triple noise barriers
pp. 467-470(4)
Authors: Uesaka, Katsumi; Ohnishi, Hirofumi; Miyake, Tatsuo; Yamamoto, Kohei; Takagi, Koichi

Effects on roadside noise levels of sound absorptive noise barriers
pp. 471-476(6)
Authors: Watts, G.R.; Godfrey, N.S.

Evaluation of the acoustical performance of noise barriers by the maximum length sequence technique
pp. 477-480(4)
Authors: Budel, F; Slama, J.G.

New type of noise barrier along the expressway
pp. 481-486(6)
Authors: Konno, Y; Yamamoto, M; IImori, H; Uesaka, K

Optimisation of low-height noise barriers including ground impedance
pp. 487-492(6)
Author: Thorsson, Pontus J

The acoustic enclosure at Heng Fa Chuen
pp. 493-498(6)
Author: Ko, Wing P

Engine noise reduction using close fitting acoustical enclosure based upon new concept
pp. 499-502(4)
Authors: Yamazaki, T; Kamata, M; Ohno, S

Vibro-acoustic characteristics of three-layered panels with honeycomb filling
pp. 503-508(6)
Authors: Baranov, S.N.; Efimtsov, B.M.

Air soundproof constructions on the basis of polymerous recyclates with mineral filler
pp. 509-512(4)
Authors: Bris, P; Vasut, S; Lapcik, L

Improvement of the sound reduction index produced by flexural soft added panels
pp. 513-516(4)
Authors: Cervera, Francisco; Uris, Antonio

Study on the characteristics on noise-propagation in tunnel and noise control with absorbing material of ceramics
pp. 517-522(6)
Authors: Kobayashi, Yoshihito; Seki, Siro; Kitamura, Toshiya; Mitsui, Ken-ichi; Yamada, Shinji

Design of double and triple isolation systems for airborne sound
pp. 523-528(6)
Authors: Recuero Lopez, Manuel; Gil, Constantino; Minguez, Antonio

Sound transmission into an enclosure with an aperture using statistical energy analysis
pp. 529-534(6)
Authors: Patil, Avinash R; Crocker, Malcolm J