INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Making road traffic quieter - Some proposals based on testing of 600 used motorcycles
pp. 430-433(4)
Author: Olafsen, Sigmund

Synergetic noises in residential areas under annoyance evaluation. An interdisciplinary concept
pp. 434-439(6)
Author: Schulte-Fortkamp, B.

Parametric excitation of a wheel rolling on a corrugated sleeper-supproted track
pp. 440-443(4)
Author: Nordborg, Anders

Case studies for the decrease of vehicle interior noise
pp. 444-447(4)
Authors: Marburg, Steffen; Hardtke, Hans-Jurgen

Improvement of the noise barrier efficiency with an active noise control system
pp. 448-451(4)
Authors: Lassalle, V.; Guccia, L.

Analysis of multi-branch flow ducts
pp. 452-455(4)
Authors: Glav, R.; Abom, M.; Nygard, S.

Measurement of turbulent generated noise in ducts
pp. 456-459(4)
Authors: Abom, Mats; Glav, Ragnar; Ljungqvist, Jenny

Online confidence limits of sound level percentiles and quality controlled short term separation of environmental noise components
pp. 460-463(4)
Author: Heiss, A.

Low flying military aircraft noise and human health - A tri-national study of the feasibility of epidemiological research
pp. 464-467(4)
Author: Flindell, Ian H.

Classification of hourly LAeq patterns of urban noise
pp. 468-471(4)
Authors: Brambilla, G.; Garcia, A.; Garrigues, J.V.

Validation of the modal expansion methodology applied to noise radiation prediction
pp. 472-475(4)
Authors: Carletti, E.; Miccoli, G.; Vecchi, I.

Determination of surface mobility of an infinite plate over a circular contact under uniform force excitation by an experimental method
pp. 476-479(4)
Authors: Li, Y.J.; Williamson, H.M.; Dai, J.; Norwood, C.J.

Noise reduction for friction saws
pp. 480-483(4)
Authors: Burgess, M.A.; Williamson, H.M.; Kanapathipillai, S.

Acoustical simulation and modeling of automotive tires
pp. 484-488(5)
Authors: Herster, P.; Mahmound, K.G.; Rainer, G. Ph.; Nackenhorst, U.

A boundary element program for the study of vibration propagation in the ground
pp. 489-494(6)
Author: Jean, Ph.

A boundary element formalism for the study of noise barriers
pp. 495-498(4)
Authors: Gabillet, Y.; Jean, P.; Defrance, J.

A layered soils model to study the vibrational behaviour of embedded plates
pp. 499-503(5)
Authors: Villot, M.; Chanut, J.

The management of light aircraft and microlight noise at military airfields
pp. 504-507(4)
Authors: Kerry, G.; Wheeler, P.D.; James, D.J.

Assessment and relevance of methods for calculating onset-rate of low altitude flight noise
pp. 508-511(4)
Authors: Kerry, G.; Lomax, C.; James, D.J.

High sensitivity measurement microphone using laser welding
pp. 512-515(4)
Authors: Sakai, M.; Fukusima, S.; Ohashi, M.; Ono, T.

On the influence of the stimulus duration on psychophysical judgment of environmental noises taken in the laboratory
pp. 516-519(4)
Author: Paulsen, Reimer

Sound reduction of low railway barriers
pp. 520-523(4)
Author: Jonasson, Hans G.

Subjective evaluation of speech intelligibility for normal-hearing persons and for persons with simulated minimal degrees of hearing loss
pp. 524-527(4)
Authors: Nilsson, Erling; Hammer, Per

Indirect force spectra identification by FRF matrix inversions: A reliable approach based on quantitative error modals
pp. 528-531(4)
Author: Blau, Matthias

Accuracy of loudness percentile versus measurement time
pp. 532-535(4)
Authors: Stemplinger, I.; Fastl, H.

Numerical modelling and measurement of the vibroacoustic characteristics of loudspeakers
pp. 536-539(4)
Authors: Goldstein, Andre L.; Gerges, Samir N.Y.

A new method for measurement of sound insulation
pp. 540-545(6)
Author: Lundberg, Karl-Ola

The performance analysis of LMS and RLS algorithms for active noise control of vehicle engine booming noise
pp. 546-549(4)
Authors: Kim, Young-Wook; Lee, Youn-Hee; Kim, Ki-Doo; Chang, Soo-Young

Wave analysis of the T-beam
pp. 550-553(4)
Author: Mace, B.R.

A wave analysis of energy flow between two non-uniformly coupled rectangular plates
pp. 554-557(4)
Authors: Wester, E.C.N.; Mace, B.R.

An evaluation method of sound insulation characteristics of a plate using small area test material and transfer function analysis
pp. 558-561(4)
Authors: Iwase, T.; Chikamatsu, N.; Hosokawa, M.

Design and use of array microphones
pp. 562-565(4)
Authors: Ogren, M.; Kleiner, M.; Jonasson, H.G.

Measurement of low frequency sound in rooms - A detailed comparsion of methods
pp. 566-569(4)
Author: Simmons, Christian

Detection of rattle in a gearbox by correlation technique
pp. 570-573(4)
Author: Blomqvist, J.

Active double-glazing windows
pp. 574-577(4)
Authors: Carme, Ch.; Montassier, A.; Rehfeld, M.

Active multichannel muffler for the ventilation system of Paris underground
pp. 578-581(4)
Authors: Montassier, A.; Carme, Ch.

ACTA: The second generation of active ventilation muffler
pp. 582-585(4)
Authors: Delemotte, V.; Carme, Ch.

Piston machine pipelines vibration attenuation using compact low-frequency pulsations damper
pp. 586-588(3)
Authors: Vassiliev, Andrej V.; Starobinski, Rudolf N.; Ryabov, Valentin M.

Induced vibrations within buildings by train operations in tunnels
pp. 589-594(6)
Authors: Rocco, L.; Sauro, S.

Discussion of total loss factor measurement method for building elements
pp. 595-598(4)
Authors: Meier, A.; Schmitz, A.

Separation of piston-slap noise from engine noise
pp. 599-602(4)
Authors: Kojima, N.; Zhou, H.; Mikami, M.; Kawamoto, Y.

The countermeasure for airport noise in Taiwan
pp. 603-606(4)
Authors: Chen, Hsiung-Wen; Wang, Shih Chieh

A comparison of methods for estimating exhaust or air inlet sound spectra for IC-engines with speed variations
pp. 607-610(4)
Author: Boden, H.

Modelling sea-crane with SEA
pp. 611-614(4)
Authors: Nierop, C.A.; Holties, H.A.; Deurhof, M.; Geissler, P.

Estimation of road traffic noise using Lpmax measurements
pp. 615-618(4)
Author: Lelong, J.

A numerical study of general aviation takeoff noise abatement procedures
pp. 619-638(20)
Author: Norgia, L.

Calculation of room acoustical parameters using the phonon transition theory after a Markov process
pp. 639-642(4)
Authors: Alarcao, D.; Bento Coelho, J.L.

Array processing for the analysis of outdoor sound
pp. 643-646(4)
Authors: Bourennane, S.; Frikel, M.; Simonnet, P.

Noise safety information survey of hand-held power tools
pp. 647-650(4)
Authors: Airo, Erkko; Hongisto, Valtteri; Oikinuora, Pekka

Source identification and prediction of Shinkansen noise by sound intensity
pp. 651-654(4)
Authors: Kawahara, Mizumasa; Hotta, Hidetoshi; Hiroe, Masaaki; Kaku, Jiro

Binaural 'hybrid' model for simulation of noise shares in the interior of vehicles
pp. 655-660(6)
Authors: Genuit, K.; Bohineust, X.; Rehfeld, M.

An investigation of sound insulation measurements by multivariate data analysis - Part 2. Airborne sound insulation
pp. 661-664(4)
Authors: Shi, Wanqing; Johansson, Carin

Role of regional governments under the new basic environment law in Japan
pp. 665-668(4)
Authors: Sone, Toshio; Saito, Fumitaka

Vibro-acoustic measurements of an inverter driven induction motor
pp. 669-672(4)
Authors: Astfalck, Allen; Wang, Chong; Lai, Joseph; Pulle, Duco

Alerting British industy to the techniques and benefits of controlling the risks from hand-arm vibration at work
pp. 673-677(5)
Author: Brereton, Paul

On the difference in the evoluation of judgements depending on either retrospective of actual noise annoyance measurement
pp. 678-682(5)
Author: Felscher-Suhr, Ute

A new design tool for optimization of viscothermal damping in double wall structures
pp. 683-686(4)
Author: Beltman, W.M.

Noise assessment methodology in multi-source environments
pp. 687-690(4)
Author: Flindell, Ian H.

An overview of noise and health effects - One way forward?
pp. 691-694(4)
Authors: Ludlow, Brian P.; Flindell, Ian H.

Characterisation of aerodynamic and acoustic sources of excitation of a TGV duplex
pp. 695-699(5)
Author: Guerrand, S.

An investigation of impact sound insulation meaurements on wooden joist floors by multivariate data analysis - Part 1. Impact sound insulation
pp. 700-703(4)
Authors: Johansson, Carin; Shi, Wanqing

Low frequency sound transmission measurements and numerical simulations: A comparative study
pp. 704-707(4)
Authors: Cutanda, V.; Pietrzyk, A.

Single and multi plane automatic balancing of rotors
pp. 708-711(4)
Authors: Wierzba, P.; Cao, W.; Park, J.S.

The sensitivity of sound insulation to partition location - Case of heavyweight partitions
pp. 712-716(5)
Authors: Pietrzyk, A.; Kihlman, T.

Better binaural recordings using the real human head
pp. 717-720(4)
Author: Maijala, Panu

A treatment for squeal noise on railway wheels with rings
pp. 721-724(4)
Authors: Yokoi, Masayuki; Nakai, Mikio

Modal properties of rectangular plates with viscoelastic restraints uniformly distributed along the edges
pp. 725-729(5)
Authors: Kang, K.H.; Kim, J.H.; Kim, K.J.

Some features of noise control of circular-saw machine tools
pp. 730-733(4)
Authors: Drozdova, L. Ph.; Ivanov, N.I.; Kirpichnikov, V.Yu.; Titov, B.V.

A new calculating method of structure-borne noise control in a vehicle cab
pp. 734-736(3)
Authors: Ivanov, N.I.; Kurtsev, G.M.; Nikiforov, A.S.; Sannikov, V.A.

Some features of small acoustical shields applications in special construction machines
pp. 737-740(4)
Authors: Ivanov, N.I.; Samoylov, M.M.; Zyuzlikova, N.V.

Aircraft noise modeling: Maintaining accuracy at low noise levels
pp. 741-744(4)
Authors: Granoien, Idar L.N.; Olsen, Herold; Liasjo, Kare H.

Annoyance of speech sound in steady noise - Effect of meaningful speech and background noise
pp. 745-748(4)
Authors: Miyazono, Hiromitsu; Usagawa, Tsuyoshi; Ebata, Masanao

Finite element analysis of vibration levels in layered soils adjacent to proposed transit tunnel alignments
pp. 749-752(4)
Authors: Crockett, Alan R.; Carman, Richard A.

Flow-tone generation in an axisymmetric whistle
pp. 753-756(4)
Authors: Lee, Duck-Joo; Lee, Hyeong-kook

Interactive database version of the radar-based airport noise modeling process
pp. 757-760(4)
Authors: Harris, A.S.; Rossano, C.F.

Loudness and sharpness relations in perceived annoyance
pp. 761-764(4)
Authors: Costa-Felix, R.P.B.; Zindeluk, M.

Self tuning control for sound transmission through double panels by using piezoelectric actuators
pp. 765-768(4)
Authors: Mitani, Yuuichiroh; Akishita, Sadao; Nelson, P.A.

Laboratory experiment on the impression of river flow sound
pp. 769-772(4)
Authors: Taya, Koichi; Arai, Keiji

Propagation in ducts with coupled resonators on the walls
pp. 773-776(4)
Authors: Pachebat, M.; Kergomard, J.; Starobinski, R.

High frequency vibration in structures: Comparison of SEA, enerby conduction, ray tracing models
pp. 777-780(4)
Authors: Chae, Ki-Sang; Ih, Jeong-Guon; Jeon, Jae-Jin

Measurement of oblique-incidence sound absorption coefficient using sound intensity
pp. 781-784(4)
Authors: Kido, Ken'iti; Suzuki, Hideo; Ono, Takahiko; Okoshi, Masaru; Shiroko, Norio

An effect of seat vibration on sleepiness of the subject under exposure of interior noise of small diesel truck
pp. 785-788(4)
Authors: Hashimoto, T.; Hatano, S.; Noguchi, Y.; Saito, H.

To design against road traffic noise in housing development, A Hong Kong experience
pp. 789-792(4)
Author: Chiu, C.C.

Analytical methods for separating the signals from noisy data
pp. 793-796(4)
Authors: Bourennane, S.; Frikel, M.; Hatimi, M.

Sound-vibration link in a fuselage cavity for active control (ASAC) specification
pp. 797-800(4)
Authors: Siano, D.; Concilio, A.; Viscardi, M.; Lecce, L.

Transverse waves in perforated tube muffler
pp. 801-804(4)
Authors: Ikeda, Tatsuyu; Nishimura, Tsuyoshi; Usagawa, Tsuyoshi; Ebata, Masanao

The influence of atmospheric channel of the sound propagation on the noise control problems
pp. 805-808(4)
Authors: Bogushevich, A. Ya.; Krasnenko, N.P.

Community reactions to railway traffic - Effects of countermeasures against noise and vibration
pp. 809-815(7)
Author: Ohrstrom, E.

Survey of sound environment of the captial of Oman
pp. 816-819(4)
Authors: Al-harthy, I.; Tamura, A.

Primary data variations and automatic aircraft noise recognition
pp. 820-823(4)
Author: Adams, K.M.

Low-noise-technology in contrast to conventional noise prevention. A comparison of efficiency achieved by different noise reduction measures in the railroad industry
pp. 824-827(4)
Authors: Heimeri, G.; Hennige, K.

A study of noise problems in a manufacturing plant
pp. 828-834(7)
Authors: Chin, K.K.; Ng, K.Y.; Soon, S.; Chui, H.T.

Mapped wave envelope method for investigation of the acoustic radiation properties of the termination of ducts
pp. 835-838(4)
Authors: Meng, X.W.; Van Overmeire, M.

Vibration control of circular plate
pp. 839-842(4)
Authors: Leniowska, Lucyna; Leniowski, Ryszard

Simulation of acoustic transients propagation by and within urban elements using the BEM formulation
pp. 843-846(4)
Authors: Rosenhouse, G.; Shteinbok, A.

Variational formualation using integral equations to solve the problem of sound propagation above an absorbing plane
pp. 847-850(4)
Authors: Granat, C.; Ben Tahar, M.; Ha-Duong, T.

Principal component analysis of FFT-based 3D intensity measurements
pp. 851-854(4)
Author: Johansson, O.

The standardization gap and the machinery noise declaration
pp. 855-858(4)
Authors: Sehrndt, G.A.; Becker, P.

Roughness growth on railway wheels due to braking
pp. 859-862(4)
Authors: Ross, Urmas; Nilsson, Anders

The equip project: Methodology and a computer tool for low noise design
pp. 863-866(4)
Author: Dittrich, M.G.