INTER-NOISE and NOISE-CON Congress and Conference Proceedings
ISSN 0736-2935 (Print)



The Noise-Con conference proceedings are sponsored by INCE/USA and the Inter-Noise proceedings by I-INCE. NOVEM (Noise and Vibration Emerging Methods) conference proceedings are included. All NoiseCon Proceedings one year or older are free to download. InterNoise proceedings from outside the USA older than 10 years are free to download. Others are free to INCE/USA members and member societies of I-INCE.
Publisher: Institute of Noise Control Engineering on behalf of International Institute of Noise Control Engineering
- Membership Information
- INCE Subject Classification
- Ingenta Connect is not responsible for the content or availability of external websites
Articles
Nearfield acoustic holography for mapping directivity of compact noise sources
pp. 867-870(4)
Authors:
Moynet, F.; Guilhot, J.P.; Azais, C.
Acoustic impedance for absorbent structures used in passive mufflers
pp. 871-874(4)
Authors:
Ducourneau, J.; Planade, O.; Guilhot, J.P.
Effects of railway-noise reduction on annoyance after rail-grinding
pp. 875-880(6)
Authors:
Moehler, U.; Hegner, A.; Schuemer, R.; Schuemer-Kohrs, A.
Conceptual methodological, and dose-response problems related to annoyance and disturbance
pp. 881-886(6)
Author:
Guski, Rainer
Description of person-noise environment relation froma viewpoint of cognitive psychology
pp. 887-890(4)
Authors:
Kawai, K.; Hirate, K.; Yasuoka, M.
Inter-relations between diesel engine combustion noise and exhaust emissions under varied running conditions
pp. 891-894(4)
Authors:
Agren, Anders; Zurita-Villarroel, Grover
Prediction equations of outdoor acoustic noise in some towns of Madrid
pp. 895-898(4)
Authors:
Recuero, M.; Gil, C.; Grundman, J.; Sancho, J.
Sound absorption characteristics of periodic resonant absorbers
pp. 899-902(4)
Authors:
Holmberg, D.; Nilsson, E.
Generalization of the pseudo forces method for characterizing structure-borne sound sources
pp. 903-906(4)
Authors:
Janssens, M.H.A.; Langevald, C.M.; Verheij, J.W.
Detection of tonal components with a model of spectral and virtual pitch based on the Fourier-time-transformation (FTT)
pp. 907-910(4)
Authors:
Vormann, M.; Daniel, P.
Psycho-acoustical characters or relevance for annoyance and perception of wind turbine noise
pp. 911-915(5)
Authors:
Persson-Waye, K.; Ohrstrom, E.
Research of generation of noise of diesel engine components
pp. 916-919(4)
Authors:
Petrovi, Predrag; Ognjanovi, Milosav; Jankovi, Slobodan
A new approach for modeling range effects in the determination of equal-loudness level contours
pp. 920-925(6)
Authors:
Mellert, Volker; Reckhardt, Carsten
Valuing transportation noise annoyance: Overview of the methods, the results and their applications
pp. 926-929(4)
Author:
Lambert, J.
Effects of noise shaping filters
pp. 930-933(4)
Authors:
Ciric, D.G.; Milosevic, M.A.
Analysis of short reverberation time measurements using several methods
pp. 934-936(3)
Authors:
Milosevic, M.A.; Ciric, D.G.
Order selective vibration analysis for diagnosis and quality control of gear boxes
pp. 937-940(4)
Authors:
Strama, O.; Thoma, R.S.; Groppe, H.
Estimation of signal correlation and system analysis functions using ARV and ARVX models
pp. 941-944(4)
Authors:
Van der Auweraer, Herman; Hermans, Luc; Coppens, Dominiek
Implementation of in-duct active control
pp. 945-948(4)
Authors:
Jiricek, O.; Konicek, P.
Specific designs of noise barriers for trains: Part I: Theoretical study of forms and materials
pp. 949-952(4)
Authors:
Houtave, P.; Clairbois, J-P.
Indices of the acoustic assessment of industrial halls
pp. 953-956(4)
Authors:
Engel, Z.; Piechowicz, J.
The effect of room acoustics on the intelligibility of speech in school classrooms
pp. 957-960(4)
Authors:
Airey, S.; MacKenzie, D.J.; Craik, R.J.M.
A method of supporting the designing of passive noise control media by means of computer tools
pp. 961-964(4)
Author:
Ka_mierczak, Jan
Conception of "Multimedia Computer Guide" for the needs of support of designing of passive noise control media
pp. 965-968(4)
Author:
Komoniewski, M.
Organizing and using selected types of databases for the needs of computer aided designing of passive noise control media
pp. 969-971(3)
Author:
Loska, A.
Effect of honeycomb sandwich panel for duct noise reduction at low frequency
pp. 972-977(6)
Authors:
Tang, W.C.; Ng, C.F.
Annoyance caused by sounds of military tracked vehicles, for indoor and outdoor conditions
pp. 978-982(5)
Author:
Vos, Joos
Testing of the CEN survey method for building acoustic measurements in Germany
pp. 983-986(4)
Authors:
Schmitz, A.; Raabe, G.
Application of a calculation model for low noise design of steel railway bridges
pp. 987-990(4)
Authors:
Janssens, M.H.A.; Thompson, D.J.; Verheij, J.W.
An experimental verification of the applicability of the least squares approach to an inverse problems in acoustics
pp. 991-995(5)
Authors:
Yoon, S.H.; Nelson, P.A.
A new technique for the measurement of the performance of sound insulation materials for cars
pp. 996-999(4)
Authors:
Fahy, F.J.; Boniha, M.W.; Holland, K.R.; Godano, Ph.
Equal sensations caused by vertical and horizontal whole-body vibrations
pp. 1000-1003(4)
Authors:
Griefahn, Barbara; Brode, Peter
Rough hard surface ground effects
pp. 1004-1009(6)
Authors:
Attenborough, Keith; Boulanger, Patrice; Taherzadeh, Shahram; Li, Kai Ming
Subjective evaluation of the effects for active noise control
pp. 1010-1013(4)
Authors:
Shoji, Atsuko; Watanabe, Yuko; Hamada, Hareo
Analysis of acoustic pressure pulsations in pipes
pp. 1014-1019(6)
Author:
Pavic, G.
Small combustion engines: Structure-borne versus airborne noise
pp. 1020-1023(4)
Authors:
Bockhoff, M.; Thoquenne, Ph.; Tourret, J.
Experimental determination of the muffler's acoustic parameters in operating conditions with the 3-transducer intensity technique
pp. 1024-1027(4)
Author:
Trdak, K.
Reduction of structure-borne noise emissions from above-ground railway lines by means of ballast mats - Analytical model and measurements
pp. 1028-1031(4)
Authors:
Wettschureck, R.; Heim, M.; Muhlbachler, S.
Calibration of sound quality recordings
pp. 1032-1035(4)
Authors:
Ladegaard, P.; Schack, T.; Haslev, H.; Gade, S.
An overview of hybrid method combining U.T.D. with B.E.M. to solve diffraction problems
pp. 1036-1039(4)
Authors:
El Hachemi, Z.; Gatignol, Ph.; Bentahar, M.
Modal shapes reconstruction method for vibroacoustic sub-domains
pp. 1040-1043(4)
Authors:
Ait Yournes, T.; Hamdi, M.A.
Analysis of the sound refraction by a jet flow by the DRBEM method
pp. 1044-1048(5)
Authors:
Perrey-Debain, E.; Guilbaud, M.; Gervais, Y.
Sound field analysis by using three-dimensional complex sound intensity
pp. 1049-1052(4)
Authors:
Sakamoto, I.; Tanaka, T.; Murakami, T.; Ogata, S.
Methodologies for conducting large scale aircraft noise exposure field studies
pp. 1053-1056(4)
Authors:
Weston, R.J.; Humpheson, D.
New approach to environmental noise problems due to new industrial zones
pp. 1057-1061(5)
Authors:
Soede, W.; Elbers, F.
Speech characteristics in high noisy environments
pp. 1062-1065(4)
Author:
Jovicic, S.T.
The contribution of heavy vehicles to road traffic noise
pp. 1066-1067(2)
Authors:
Tachibana, Hideki; Yano, Hiroo
Accuracy of sound power level determination by the scanning intensity measurement
pp. 1068-1071(4)
Authors:
Yano, Hiroo; Tachibana, Hideki; Koyasu, Masaru
Calculation of impulse responses in 3-D sound field with absorption boundary by the finite difference method
pp. 1072-1075(4)
Authors:
Sakamoto, Shin'ichi; Tachibana, Hideki
Acoustical mobility for vibroacoustic prediction - Application to double wall transmission loss
pp. 1076-1081(6)
Authors:
Guyader, J.L.; Cacciolati, C.; Nelisse, H.
Minimizing aircraft noise exposure at the new Oslo airport - Gardermoen
pp. 1082-1085(4)
Authors:
Borchgrevink, Johan; Liasjo, Kare H.; Fuglum, Knut
Standards for a quieter world; Some acoustical reflections from the UK National Physical Laboratory
pp. 1086-1099(14)
Author:
Berry, Bernard F.
Use of rectifying meshes for active noise control in an air flow duct
pp. 1100-1103(4)
Authors:
Hoshino, Tsutomu; Ohashi, Tadashi; Ohga, Juro
Effects of switching angles on noise and vibration generation in a switched reluctance motor
pp. 1104-1107(4)
Authors:
Heo, Kyung-Bum; Cho, Dae-Hyeon; Kim, Kwang-Joon
Friction identification and its application to control performance improvement in a slight stabilization system
pp. 1108-1111(4)
Authors:
Kim, Kwang-Joon; Kang, Youn-Sik; Kang, Min-Sig
The insertion loss of screens under the influence of wind
pp. 1112-1117(6)
Authors:
Rasmussen, Karsten B.; Arranz, Marta Galindo
Measurement of the sound pressure level distribution in a reverberation room - Consequences for sound power measurements
pp. 1118-1121(4)
Author:
Schaffner, A.
Calibration and evaluation of a moment actuator
pp. 1122-1125(4)
Authors:
Shuye, Qiu; Qitai, Su
Vagueness and uncertainty in community noise annoyance modeling
pp. 1126-1129(4)
Authors:
De Poorter, J.; Botteldooren, D.
Vibrational energy transmission between periodically coupled walls in buildings
pp. 1130-1133(4)
Authors:
Bosmans, I.; Vermeir, G.
Vibration and noise in dwellings generated by traffic
pp. 1134-1137(4)
Author:
Niemas, Marek
Noise radiation simulation of a resilient train wheel
pp. 1138-1141(4)
Authors:
van Haaren, E.; Verheij, J.W.; Verbeek, G.; Schoofs, A.J.G.
Noise reduction in centrifugal fans: Comparative study by use of resonators and by loudspeaker source
pp. 1142-1145(4)
Authors:
Bhat, M.G.; Borole, K.R.
Final results of a national round robin test determining the sound power level of machines/equipment
pp. 1146-1151(6)
Author:
Hubner, Gerhard
Modification of flow-structure interaction in the boundary layer on the laminar airfoil in effect of external and internal acoustic excitation
pp. 1152-1157(6)
Authors:
Szuster, J.T.; Wojciechowski, J.
The new ANSI method for assessing combined noise environments; Comparison with other methods
pp. 1158-1163(6)
Author:
Schomer, Paul D.
Vibration reduction index Kij for junctions of building elements with cavities
pp. 1164-1169(6)
Author:
Gerretsen, Eddy
30 years experience in teaching engineering acoustics
pp. 1170-1176(7)
Author:
Szentmartony, T.
Effects of time variances using MLS techniques in building acoustics for measuring sound insulation and reverberation time
pp. 1177-1180(4)
Authors:
Bietz, H.; Bethke, G.; Schmitz, A.
Static stiffness and vibration damping of sandwich beams containing rubber and fiber-reinforced plastic layers
pp. 1181-1184(4)
Authors:
Farkas, J.; Jarmai, K.; Bakk, N.
The zoning of noise impact and land use around the airports in Ukraine and Poland
pp. 1185-1188(4)
Authors:
Romanenko, V.; Akimenko, V.; Zaporozhets, O.; Tokarev, V.; Sadowski, J.; Chyla, A.; Szudrowicz, B.
Numerical simulation of airborne sound transmission at low frequencies: The influence of the room and the partition parameters
pp. 1189-1192(4)
Authors:
Osipov, A.; Mees, P.; Vermeir, G.
Characteristics of MRT train noise
pp. 1193-1194(2)
Authors:
Chew, C.H.; Cui, F.S.; Ang, T.C.
Chronic and acute noise effects on children
pp. 1195-1199(5)
Author:
Hygge, S.
Calculation model for airborne sound insulation of windows in the light of the results of research
pp. 1200-1204(5)
Authors:
Szudrowicz, B.; Nurzyoski, J.
Tyre noise particularities
pp. 1205-1208(4)
Author:
Barti, Robert
Combined FEM/BEM technique for linear acoustic radiation problems with applications to arbitrary shell in fluid medium
pp. 1209-1212(4)
Authors:
Dushin, A. Yu.; Klyaus, K.M.
Dominant noise sources in off-road vehicles
pp. 1213-1216(4)
Authors:
Borak, Djuro; Jankovi, Slobodan; Petrofi, Predrag
The experiment on loudness in field and laboratory: An examination of the applicability of LAeq to mixed sound sources
pp. 1217-1222(6)
Authors:
Kuwano, Sonoko; Kaku, Jiro; Kato, Tohru; Namba, Seiichiro
Continuous evaluation of noise in laboratory situations
pp. 1223-1228(6)
Authors:
Kuwano, Sonoko; Namba, Seiichiro
SAE cooperative research program-sound level urban driving cycle
pp. 1229-1233(5)
Authors:
Render-Williams, C.; Smith, P.; Crompton, T.; Hughes, T.; Schumacher, D.
A new porous pavement with extended acoustical lifetime and useful even on low-speed roads
pp. 1234-1241(8)
Author:
Sandberg, Ulf
Exterior noise from in-vehicle audio entertainment systems and effects on pass-by sound levels
pp. 1242-1247(6)
Author:
Hunt, Malcolm
Towards generic design criteria for vehicle door shut exterior noise quality
pp. 1248-1251(4)
Authors:
Fish, David G.; Franco-Jorge, Maria
Personality factors in sound perception: Historical developments
pp. 1252-1257(6)
Author:
Schick, A.
Interaction between noise-induced stress and magnesium losses: Relevance for long-term health effects
pp. 1258-1263(6)
Authors:
Ising, H.; Gunther, T.
Prophylactic effect of magnesium in noise induced hearing loss
pp. 1264-1268(5)
Authors:
Attias, J.; Joachims, Z.; Ising, H.; Bresloff, I.
Influence of oral magnesium administration on temporary and permanent threshold shift in humans beings
pp. 1269-1274(6)
Authors:
Spehr, C.; Koop, L.; Maschke, C.
Prophylactic and therapeutic effects of magnesium on acoustic trauma: Aminal studies
pp. 1275-1278(4)
Authors:
Scheibe, F.; Haupt, H.; Rebentisch, E.; Wenzel, M.
State of the art in tyre-road noise modelling
pp. 1279-1284(6)
Authors:
Gerretsen, Eddy; Salomons, Erik; de Roo, Foort
Assessment of noise impact in a multisource environment
pp. 1285-1289(5)
Author:
Gjestland, Truls
The effect of traffic organizing arrangement on noise immission - A case history
pp. 1290-1293(4)
Author:
Demeter, Erika
Ship diesel-generator set sound-isolating system
pp. 1294-1297(4)
Authors:
Sukhanov, Sergey O.; Klyaus, Konstantin M.; Maliutin, Arkadiy A.; Myshinsky, Ernst L.
New Canadian noise exposure program
pp. 1298-1301(4)
Authors:
El Huot, Pierre; Standen, Neil
A study on the dynamic test of viscoelastic material
pp. 1302-1308(7)
Authors:
Choi, Hyun; Park, Kun-Rok; Kim, Doo-Hoon; Lee, Sang-Jo
Sound characterization of urban environment
pp. 1309-1312(4)
Authors:
Maffiolo, Valerie; David, Sophie; Dubois, Danile; Vogel, Corsin; Castellengo, Michele; Polack, Jean-Dominique
Measures for noise reduction on steel railway bridges
pp. 1313-1316(4)
Author:
Dings, Pieter
Empirical issues concerning annoyance models for combined community noises
pp. 1317-1322(6)
Authors:
Berglund, B.; Nilsson, M.E.
How accurate does an impedance model represent porous acoustic insulation? A validation study using a new wave based prediction technique
pp. 1323-1326(4)
Authors:
Desmet, W.; Sas, P.; Vandepitte, D.
Improved analysis of noise emitted by reciprocating machinery
pp. 1327-1330(4)
Author:
Vokurka, K.
- Access Key
- Free content
- Partial Free content
- New content
- Open access content
- Partial Open access content
- Subscribed content
- Partial Subscribed content
- Free trial content