INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Effects of refraction on short range outdoor propagation over asphalt surfaces
pp. 3-8(6)
Authors: Hartwig, Troy; Bolton, J. Stuart

Layered fibrous treatments for sound absorption and sound transmission
pp. 9-14(6)
Authors: Lai, Heng-Yi; Bolton, J. Stuart

The resonant and non-resonant sound transmission through panels in statistical energy analysis
pp. 15-20(6)
Author: Gurovich, Yuri A.

Introducing decoupling coastings in S.E.A. models - Physical interpretation and results on simple models
pp. 21-28(8)
Author: Audoly, Christian

Vibration power flow in orthotropic plates using structural intensity technique
pp. 29-34(6)
Authors: Mandal, Nirmal Kumar; Rahman, Roslan Adbdu; Leong, M. Salman

Sound transmission through double-leaf corrugated panel constructions
pp. 35-40(6)
Authors: Tang, W.C.; Zheng, H.; Ng, C.F.

Reducing sound power levels at isolated frequencies with strategically placed constrained layer damping patches
pp. 41-46(6)
Authors: Wiegandt, Ted; Mann III, J. Adin

Air-borne, fluid-borne and structure-borne radiation paths in a hydraulic power application equipped with a gear pump
pp. 47-52(6)
Authors: Lee, S-H.; Royston, T.J.

Theoretical studies on the control of impact acceleration noise
pp. 53-58(6)
Authors: Zhang, Bin; Zhauang, Wenxiong; Ge, Peisheng

Some measurements related to flow-induced microphone noise
pp. 59-64(6)
Authors: Quinlan, D.A.; Vu-Maesto, H.

Future trends in acoustic noise emission for telecommunication and information technology equipment
pp. 65-70(6)
Author: Quinlan, D.A.

Noise sources, paths and simple controls on an industrial flow sweeper
pp. 71-76(6)
Author: Narayan, Nilabh

Advanced low noise air cooling fans
pp. 77-84(8)
Author: van der Spek, Henk F.

Relaxation models for the acoustical properties of sound-absorbing porous materials
pp. 85-90(6)
Author: Wilson, D. Keith

Noise-induced hearing loss among coal mining occupations
pp. 91-96(6)
Author: Valoski, Michael P.

Measurement of hearing protection attenuation at ultrasonic frequencies
pp. 97-102(6)
Authors: Behar, A.; Crabtree, R.B.

Time-domain impedance boundary condition for waves
pp. 103-108(6)
Author: Fung, K-Y.

Noise source identification using acoustic signature and predicted magnitude
pp. 109-114(6)
Author: Greene, Rob

Case study: Noise analysis of operations from an existing mine at a nearby proposed residential/recreational development
pp. 115-122(8)
Authors: Greene, Rob; Greene, Michael G.

Numerical load generation, vibration analysis, and acoustic signature prediction of a ground vehicle
pp. 123-128(6)
Authors: Birkett, Craig; Vlahopoulos, Nickolas; Shalis, Edward; Wu, Zhen

Sensitivity calculations for structural-acoustic EFEM predictions
pp. 129-134(6)
Authors: Bitsie, Fernando; Bernhard, Robert J.

Various approaches to estimating natural frequencies of automobile cab cavities from a boundary element model
pp. 135-140(6)
Authors: Kondapalli, Prasanna S.; Birkett, Craig

In-car noise prediction for newly developed home elevator
pp. 141-144(4)
Author: Zhou, Yue-Qi

Analysis of periodic acoustic problems with double side impedance condition
pp. 145-150(6)
Author: Raveendra, S.T.

The application of BEM-FEM model to predict acoustic silencer performance and to predict earcanal-earmold dynamics
pp. 151-158(8)
Authors: Choi, Chang-Hwan; Royster, Larry H.

Issue in modeling outdoor acoutical barriers in power plants
pp. 159-164(6)
Author: Putnam, Robert A.

Issue in predicting community noise for power plants
pp. 165-172(8)
Author: Brittain, Frank H.

Noise control for a 230 MW cogeneration plant
pp. 173-180(8)
Authors: Moritz, Charles T.; Bruce, Robert D.; Bicknell, Reid; Jacobson, Jeff

Prognostics: What does if mean in condition-based maintenance?
pp. 181-184(4)
Author: Nickerson, G. William

Condition monitoring on engines using external response measurements to reconstruct internal excitations
pp. 185-188(4)
Authors: Abram, Kwin R.; Bernhard, Robert J.; Hayes, Paul A.

A case study in cage fault detection using bandwidth-weighted demodulation
pp. 189-194(6)
Authors: Limmer, Joel D.; Li, C. James

Prognostics for a reciprocating air compressor
pp. 195-200(6)
Author: McCarthy, Daniel J.

Extraction of periodic modulation of rotational speed from roller bearing vibration signals using a modulation template matching algorithm
pp. 201-208(8)
Authors: Van Dyke, Michael V.; Reichard, Karl M.; Swanson, David C.

Bending wave propagation past a joint and the resulting sound radiation: The round-robin T-beam
pp. 209-214(6)
Authors: Mann III, J. Adin; Carney, Matthew S.; Wall, Matthew

A wave decomposition technique to separate longitudinal and flexural wave intensities
pp. 215-220(6)
Authors: Szwerc, Richard P.; Burroughs, Courtney B.; McDevitt, Timothy E.

Measurement of coupled longitudinal and flexural wave intensities using a wave decomposition technique
pp. 221-226(6)
Authors: Szwerc, Richard P.; Burroughs, Courtney B.; McDevitt, Timothy E.

Power dissipations in a vibrating lexan T-shaped beam
pp. 227-232(6)
Authors: Hambric, Stephen A.; Szwerc, Richard P.

An improved formulation for the SEA modeling of beams: Application to a T-beam
pp. 233-238(6)
Authors: Cimerman, Benjamin; Burton, Thomas E.

Experimental vibration analysis of an aluminum ribbed panel
pp. 239-244(6)
Authors: Erickson, Matthew J.; Burroughs, Courtney B.

Finite element mode shapes of an aluminum ribbed panel
pp. 245-252(8)
Authors: Hambric, Stephen A.; Erickson, Matthew J.; Capone, Dean E.; Burroughs, Courtney B.

The ASHRAE Handbook chapter on nosie and vibration: A critical review
pp. 253-256(4)
Author: Peppin, Richard J.

Room noise Criteria: A consultant's experience
pp. 257-262(6)
Author: Lilly, Jerry G.

Room noise criteria - Time for common sense
pp. 263-268(6)
Authors: Hale, Marlund E.; Burke, Richard E.

Rating noise - The experience of the computer industry
pp. 269-272(4)
Authors: Warshawsky, Marc; Hellweg Jr., Robert D.; Pei, Hsien-sheng (Jason)

Specifying design noise levels for occupied spaces and units of equipment
pp. 273-278(6)
Author: Moiseev, N.

Room noise criteria - A new approach at low frequencies
pp. 279-284(6)
Authors: Hellweg Jr., Robert D.; Pei, Hsien-sheng (Jason)

Room noise criteria - A status report
pp. 285-290(6)
Authors: Pei, Hsien-sheng (Jason); Peppin, Richard J.

Issues in design of combustion turbine silencers
pp. 291-296(6)
Author: Cummins Jr., Jim R.

Issues in HRSG system noise
pp. 297-304(8)
Author: Hessler Jr., Geroge F.

Issues in mechanical draft cooling tower noise
pp. 305-314(10)
Author: Jameson, Randall W.

24 bit digital accelerometers
pp. 315-318(4)
Authors: Lally, Richard W.; Baer, Wayne

Statistical change detection using nonlinear models
pp. 319-324(6)
Authors: Parker Jr., B. Eugene; Poor, H. Vincent; Larson, Edward C.; Hamilton, Thomas A.; Frankel, James P.

A hybrid physical model-neural network approach to machine diagnostics
pp. 325-330(6)
Authors: Yoon, Douglas C.; Wilensky, Gregg E.; Simons, Donald A.; Riley, Ronald A.

A method of minimizing interference in Wigner-Ville distribution and its application in acoustics and vibration signals
pp. 331-336(6)
Authors: Park, Yon-Kyu; Kim, Yong-Hann

Exploitation of vibration and noise signals cyclostationarity in condition based maintenance
pp. 337-342(6)
Author: Vokurka, Karel

A review of speech intelligibility indicators - Their relatiionship and applications
pp. 343-348(6)

Speech intelligibility in rooms
pp. 349-354(6)
Author: van der Werff, Johan

Relationships between speech intelligibility and objective acoustical parameters or architectural features in Catholic churches
pp. 355-362(8)
Authors: Carvalho, Antonio P.O.; Morgado, Antonio; Henrique, Luis

A computer-based certificate program in acoustics (noise control engineering)
pp. 363-368(6)
Author: Stuart, Alan D.

CD-ROM development for a certificate program in acoustics
pp. 369-376(8)
Authors: Sparrow, Victor W.; Williams, Vickie S.

A reciprocity technique for the prediction of road noise transmission into automobile cabins
pp. 377-382(6)
Authors: Knight, J. Scott; Burroughs, Courtney B.

Visualization of noise generated by moving vehicles
pp. 383-386(4)
Authors: Park, Soon-Hong; Kwon, Hyu-Sang; Kim, Yang-Hann

Prediction of noise propagation from equipment mounted under a rail vehicle
pp. 387-392(6)
Author: Panza, Michael J.

Unsteady thrust of a water jet vane-axial pump
pp. 393-398(6)
Authors: Weston, A.; Mongeau, L.

Submarine impact of sonic boom: A study comparing and reconciling results from two prediction approaches
pp. 399-404(6)
Authors: Cheng, H.K.; Lee, C.J.

An intelligent aircraft and traffic noise monitoring system
pp. 405-410(6)
Authors: Mohajeri, Ramin; Fricke, F.R.; Atkinson, John

Effect of Army vehicular and ammunition noise on hearing
pp. 411-416(6)
Authors: Srivastava, K.K.; Chaturvedi, R.C.; Singh, A.P.

Pilot studies of speech communication in elementary school classrooms: Liteerature review and methods
pp. 417-422(6)
Authors: Abbott, Phillip; Crandell, Carl C.; Gold, Martin A.; Hasell, M. Joyce; Herr, Christopher R.; Lee, Hee Won; Lehde, Mitchell; Siebein, Gary W.

Acoustical design parameters for hearing impaired classrooms: A case study
pp. 423-426(4)
Author: Chi-Quee, Darron A.

Can noise levels at school gymnasia cause hearing loss: A case study of a physical education teacher
pp. 427-434(8)
Author: Jiang, Tao

Dynamic characterization of a Lexan ribbed panel
pp. 435-438(4)
Authors: Leeson, Brian; Saunders, William R.; Burdisso, Ricardo A.; West, Robert L.

Interative method for measuring the radiation efficiency of unbaffled plates
pp. 439-444(6)
Authors: Carroll, Gerald P.; West, Robert; Saunders, Will; Burdisso, Ricardo

Comparision of modal mobility and statistical energy models of a ribbed plate
pp. 445-450(6)
Author: DeJong, Richard G.

Vibroacoustic experimental data on a large cavity covered by a flexible plate
pp. 451-456(6)
Authors: Nabeau, Sylvain; Champoux, Yvan; Beslin, Olivier; Chenevert, Daniel

SEA modeling and prediction of the velocity and pressure response for the acoustic cavity
pp. 457-464(8)
Author: Cuschieri, J.M.

A "Buy Quiet" program for NASA Lewis Research Center: Specifying low equipment noise emission levels
pp. 465-470(6)
Authors: Cooper, Beth A.; Nelson, David A.

Effect of blade profile on sheet metal shear noise
pp. 471-476(6)
Authors: Bahrami, Ahmad; Williamson, Hugh M.

Comparative testing of the acoustic properties of concrete blocks filled with recycled material for noise barrier applications
pp. 477-482(6)
Authors: Raichel, Daniel R.; Jamgocian, Alek; Yapijakis, Constantine

Determining sound power in reverberation rooms and other indoor work spaces using vector sound-intensity measurement
pp. 483-490(8)
Authors: Hickling, Robert; Lee, Peng

A psychocoustic annoyance concept for application in sound quality
pp. 491-496(6)
Author: Widmann, U.

Effects of definitions and the listener's jury testing experience on perceived generality and importance of selected sound quality attributes
pp. 497-502(6)
Authors: Abouchacra, K.S.; Letowski, T.

Influence of modulated complex tones on power window regulator noise quality
pp. 503-506(4)
Authors: Shadden, Richard D.; Lim, Teik C.

A computer-aided paired-comparison algorithm using a 5-point comparison scale and its application to performing subjective ratings
pp. 507-512(6)
Author: Hsieh, Hsiao-an

Aircraft damage detection from acoustic and noise impressed signals found by a cockpit voice recorder
pp. 513-518(6)
Authors: Stearman, Ronald O.; Rohre, Stuart M.; Schulze, Glen H.

Theoretical bases of free oscillation method for acoustical non-destructive testing
pp. 519-524(6)
Authors: Bouraou, N.; Gelman, L.

Hidden parameter tracking using delay coordinate embedding
pp. 525-530(6)
Authors: Chelidze, D.; Cusumana, J.P.; Hecht, N.K.

An algorithm to count fatique cycles
pp. 531-536(6)
Author: Kendig, R.P.

Detection of surface defects in a bearing ball using electronmagnetic flux
pp. 537-542(6)
Authors: Bradley, Ellen M.; Swanson, David C.

Dispersion and attenuation of circumference creeping waves around a fluid-filled cylindrical cavity in an elastic medium
pp. 543-548(6)
Authors: Hassan, Waled; Nagy, Peter B.