INTER-NOISE and NOISE-CON Congress and Conference Proceedings

A quarter century of noise control - A historical perspective
pp. 1-10(10)
Author: Lang, W.

Acoustic prediction
pp. 11-50(40)
Author: Nelson, P.A.

Natural noise control
pp. 51-74(24)
Author: Attenborough, Keith

Acoustic engineering in automotive industry: Requirements to education of engineers in acoustics
pp. 75-80(6)
Author: Meier, H.E.

Noise control engineering education at Purdue University
pp. 81-86(6)
Authors: Bernhard, R.J.; Bolton, J.S.; Davies, P.; Jones, J.D.; Mongeau, L.

Education in acoustics - Demand and supply
pp. 87-90(4)
Author: Kihlman, T.

In residence and distance education in noise control
pp. 91-96(6)
Author: Tichy, J.

Practical education to change attitudes to noise
pp. 97-100(4)
Author: Bull, D.G.

Education problems in acoustics implemented in architecture and environmental planning
pp. 101-106(6)
Author: Kurra, S.

The standards, measurements and testing programme of the EC
pp. 107-110(4)
Author: Fairley, T.E.

A case study of adjusting the annoyance of artillery noise to the annoyance of aircraft noise
pp. 111-114(4)
Authors: Luz, B.; Lewis, N.; Russell, W.

The ISVR undergraduate and Master of Science programmes in acoustics and vibration
pp. 115-120(6)
Author: Fahy, F.J.

Towards the use of sound exposure in environmental noise standards
pp. 121-126(6)
Author: Dickinson, P.J.

Aerodynamic noise radiating from a windbreak cover on a car roof
pp. 127-130(4)
Authors: Sagawa, A.; Maebashi, E.; Matsuo, J.

Air conditioning noise sources identification using acoustic holography
pp. 131-134(4)
Authors: Moynet, F.; Guilhot, J.P.; Azais, C.

Reduction of microphone phenomenon in cathode ray tube by finite element analysis and design of experiment
pp. 135-138(4)
Authors: Kim, S.G.; Kim, S.D.; Seo, J.W.; Yoon, T.S.; Jeong, B.K.

Industrial noise sources - Methods of measurement and estimation
pp. 139-142(4)
Author: Zuchowicz-Wodnikowska, I.

A new approach to wind turbine noise measurement
pp. 143-148(6)
Author: Lowson, J.

Vibration prediction and control in microelectronics facilities
pp. 149-154(6)
Author: Gordon, C.G.

Issues of minimisation of noise in machines treated as multi-source systems
pp. 155-158(4)
Author: Dabrowski, Z.

Noise reduction of mixer-ejector nozzle
pp. 159-162(4)
Authors: Oishi, T.; Nakamura, Y.

Condtion monitoring of machines using acoustic signals
pp. 163-166(4)
Authors: Heng, R.B.W.; Nor, M.J.

Sound transmission through gearbox: Study and modelling of the internal acoustic sources
pp. 167-170(4)
Authors: Sibe, A.; Sabot, J.

Analysis and modelling of the vehical gearbox noise
pp. 171-174(4)
Author: Misun, V.

A comparison of prediction for valve noise with experimental results
pp. 175-178(4)
Authors: Bruggerman, J.C.; Hopmans, L.J.M.; Blijie, C.J.M.; Van Veghel, H.

Mechanism of whistle-like tones of the control valve
pp. 179-182(4)
Authors: Nakashiba, Y.; Seto, K.

Pneumatic sound generator with frequency-independent control of directivity characteristic
pp. 183-186(4)
Authors: Raida, H-J.; Bechorr, O.

Modeling and measurement of sound intenstiy of jet screech
pp. 187-190(4)
Authors: Seto, K.; Ohta, H.

Precision of a new method to measure fan structure-borne vibration
pp. 191-194(4)
Authors: Hellweg, R.D.; Pei, H.S.; Wittig, L.E.

Experiental determination of acoustic source data for fans
pp. 195-198(4)
Authors: Boden, H.; Abom, M.; Lavtrenjev, J.

Study on the reduction of rotating noise emitted from centrifugal fan
pp. 199-202(4)
Authors: Suzuki, S.; Nemura, T.; Kawai, N.; Minorikawa, G.

Noise of automobile alternator
pp. 203-206(4)
Authors: Jiricek, I,; Konicek, P.; Bednarik, M.

The influence of the unsymmetric alternator fan blade-spacing to the total sound pressure level and spectra of aerodynamic noise
pp. 207-210(4)
Authors: Mesaric, M.; Boltezar, M.; Kuhelj, A.

Noise emissions of constructions for bridge-to-road crossings
pp. 211-214(4)
Author: Martner, O.

Rail corrugation: Consequences for railway noise
pp. 215-218(4)
Author: Pinga, P.C.

Assembling of vibrating structures with a non-linear intermediate junction
pp. 219-222(4)
Author: Blomqvist, J.G.

Analysis of the squeal vibration of a drum brake
pp. 223-226(4)
Authors: Lim, B-D.; Jung, K.K.; Yoon, K.H.

Frictional noise in sliding contact of alumina ceramics
pp. 227-230(4)
Authors: Yokoi, M.; Senda, T.; Nakai, M.

Squeal noise elimination on railway wheels with ring
pp. 231-234(4)
Authors: Nakai, M.; Yokoi, M.

Study on the reduction of Karman-Vortex induced sound using quiet flow wind tunnel
pp. 235-238(4)
Authors: Suzuki, S.; Tamoto, H.; Omata, M.

Noise source localisation in an hydraulic aggregate using the sound intensity method
pp. 239-244(6)
Authors: Fiebig, W.; Heisel, U.

Noise reduction using inlet and exit treatment to an expanded-metal press - A case study
pp. 245-248(4)
Authors: Eager, D.M.; Williamson, H.M.

Contribution of the brush communtator system to noise emissions of series FHP motors
pp. 249-252(4)
Authors: Ozlurk, G.S.; Schardt, G.; Gatzwiller, K.

Reduction of noise and vibration from bearing loaded shafts in photocopiers
pp. 253-256(4)
Authors: Fritsch, B.; Bull, D.G.

Noise generation by a suction unit in different operating conditions
pp. 257-260(4)
Authors: Cudina, M.; Zelezic, E.

Analysis of refrigerator noise for sound quality evaluation
pp. 261-264(4)
Authors: Buruk, M.Y.; Serafettinoglu, H.

Indices of the acoustic assessment of machines
pp. 265-268(4)
Authors: Engel, Z.; Pleban, D.

An impedance technique for determining the dynamic structural properties of a porous material
pp. 269-272(4)
Authors: Wilson, R.; Cummings, A.

Noise source identification and control of a cable belt conveyor system
pp. 273-276(4)
Authors: Norton, M.P.; Keswick, P.R.; Ismail, B.

Countermeasure for noise and vibration reduction of high-speed vehicle equipped with resilient wheels
pp. 277-280(4)
Authors: Satoh, K.; Sagawa, A.; Matsui, Y.; Satoh, T.

Simulation of wayside time-dependent noise level on Shinkansen and analysis of noise sources for their contribution to the noise level
pp. 281-284(4)
Author: Morikawa, T.

A theoretical and experimental study of the intake noise of a passenger car
pp. 285-288(4)
Authors: Kwon, O.; Song, J.

Designing high-speed railway systems: Noise challenges
pp. 289-294(6)
Authors: Gautier, P-E.; Guccia, L.

Status of vehicular noise control in Taiwan
pp. 295-298(4)
Authors: Chen, H-W.; Su, G-F.

Composition of characteristic vehicle interior sound - Development process with respect to power train
pp. 299-304(6)
Authors: Alt, N.; Wilhelm, M.; Wagner, T.

Standings and results of the research on aircraft nosie - Longitudinal study at Dusseldorf Airport 1987-1995
pp. 305-310(6)
Authors: Kastka, J.; Mau, U.; Murth, T.; Siegmann, S.

Comparison of noise calculation models
pp. 311-316(6)
Authors: Van den Berg, M.; Gerretsen, E.

Advanced subsonic aircraft engine noise reduction research
pp. 317-322(6)
Author: Groeneweg, J.F.

An empirical model for the in-flight noise directivity of an F-16C
pp. 323-328(6)
Authors: Plotkin, K.J.; Lee, R.A.; Downing, J.M.

Low flying aircraft nosie - Is it a health risk?
pp. 329-334(6)
Author: Ludlow, B.P.

Second generation SST: Noise characteristics and operational noise performance
pp. 335-340(6)
Author: Mortlock, A.K.

Aircraft turbofan broadband noise prediction
pp. 341-344(4)
Author: Lewy, S.

Interpretation of air-to-air flyby noise measurements on a piston-powered propeller aeroplane
pp. 345-348(4)
Author: Kallergis, M.

Noise levels and communication on the flight decks of civil aircraft
pp. 349-352(4)
Authors: Lower, M.C.; Bagshaw, M.

A new vehicle noise measuring method replacing the ISO 362 principle
pp. 353-358(6)
Author: Sandberg, U.

Vehicle noise emission at low speed
pp. 359-364(6)
Author: Kragh, J.

Noise control of in-use vehicles - New Norwegian legislation
pp. 365-370(6)
Author: Berge, T.

Trends in traffic noise research over 25 years
pp. 371-376(6)
Author: Burgess, M.

Experimental comparisons of sound visualization methods for moving noise sources
pp. 377-380(4)
Authors: Kim, S-M.; Kwon, H-S.; Park, S-H.; Kim, Y-H.

Objective evaluation of interior noise in running vehicles
pp. 381-384(4)
Authors: Jeong, H.; Ih, J-G.; Jeon, J-J.

Case studies of body noise from a rigid and an articulated tipper lorry
pp. 385-390(6)
Authors: Harris, G.J.; Nelson, P.M.

Effect of track bending waves on generating ground vibrations by high-speed trains
pp. 391-394(4)
Author: Krylov, V.V.

Dutch noise reduction program for freight railway vehicles: Localization of important sources
pp. 395-398(4)
Authors: de Vos, P.H.; Barsikow, B.

Analysis of sound source characteristics of Shinkansen cars by means of X-shaped microphone array
pp. 399-402(4)
Authors: Takano, Y.; Horihata, K.; Kaneko, R.; Matsui, Y.; Fujita, H.

Development and testing of wheels and track components for reducing rolling noise from freight trains
pp. 403-408(6)
Authors: Jones, C.J.C.; Edwards, J.W.

Noise from underground railways - A 'state of the art' review
pp. 409-414(6)
Author: Ljunggren, S.

Groundborne noise and vibration from railways: The pitfalls
pp. 415-420(6)
Authors: Greer, R.J.; Collins, K.M.

Groundborne noise from new railway tunnels
pp. 421-426(6)
Author: Jones, C.J.C.

A study of the noise of Sheffield supertram
pp. 427-432(6)
Author: Heng, R.B.W.

Prediction, assessment and control of construction site noise
pp. 433-438(6)
Authors: Jones, R.D.; Clough, R.H.

Acoustic studies of a 2.2 KW variable speed induction motor
pp. 439-444(6)
Authors: Reyniers, D.; Lai, J.C.S.; Pulle, D.W.J.

Analysis of the effects of time harmonics on the radiated sound power of variable speed induction motors
pp. 445-448(4)
Authors: Timar, P.L.; Lai, J.C.S.

Acoustic design of a new paper board machine KM8 at Stora Billerud Skoghallsverken
pp. 449-452(4)
Author: Landstrom, L.

Tonal noise immission from wind farms
pp. 453-458(6)
Authors: Bullmore, A.J.; McKenzie, A.R.

Low frequency noise and vibration levels at a modern wind farm
pp. 459-462(4)
Authors: Legerton, M.L.; Manley, D.M.J.P.; Manley, J.W.; Sargent, J.W.; Snow, D.J.; Styles, P.

An investigation of blade swish from wind turbines
pp. 463-470(8)
Author: Dunbabin, P.

The measurement of noise from wind farms and background noise levels
pp. 471-478(8)
Author: Hayes, M.D.

Aerodynamic noise from wind tunnels
pp. 479-484(6)
Author: Lowson, M.V.

Effects of tensile forces on the acoustic emissions of electric motors
pp. 485-490(6)
Authors: Ozturk, C.; Rassmussen, G.

Burner pulsations in central heating boilers: Numerical simulation of burner-boiler interaction and visualization of combustion instability
pp. 491-494(4)
Authors: Parchan, R.R.; Bruggeman, J.C.; Aptroot, R.

An aerothermoacoustic model for computation of sound radiated by turbulent flames
pp. 495-498(4)
Authors: Boineau, P.; Gervais, Y.; Morice, V.

Flow-induced noise and vibration on high-speed vehicles
pp. 499-502(4)
Author: Cousin, G.

Small slender pieces attached at end of the nozzle for decreasing the low velocity jet-noise
pp. 503-506(4)
Authors: Maruta, Y.; Minorikawa, G.; Ikeda, M.

Acoustic radiation of a plate excited by turbulent fluctuations of pressure and shearing stress
pp. 507-510(4)
Author: Efimtsov, B.M.

Active noise control of self-excited tone noise from an impinging air jet by means of shear layer excitation
pp. 511-514(4)
Authors: Nakano, M.; Ohtsuki, T.

Derivation of four-pole parameters for including higher-order mode effects on elliptical expansion chamber with mean flow
pp. 515-518(4)
Authors: Nishimura, T.; Ikeda, T.; Usagawa, T.; Ebata, M.

Acoustical pressure generated by airflow over a complex cavity: Identification of phenomena connected with highest pressure levels
pp. 519-522(4)
Authors: Massenzio, M.; Blaise, A.; Lesueur, C.

Prediction of rainfall noise on single and double glazing
pp. 523-528(6)
Authors: Vermeir, G.; Mees, P.; Bosmans, I.

Application of the dual reciprocity method to acoustic radiation in an inhomogeneous medium
pp. 529-532(4)
Authors: Perrey-Debain, E.; Guilbaud, M.; Gervais, Y.

Comments on ISO 96 13-2
pp. 533-536(4)
Authors: Witte, R.; Ouwerkerk, M.