INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Applications of noise control engineering in Japan
pp. 3-16(14)
Author: Koyasu, Masaru

Applications of active control of sound and vibration
pp. 17-28(12)
Author: Tichy, Jiri

Progress in controlling noise in the workplace
pp. 29-40(12)
Author: Bruce, Robert D.

Lisalab: An interactive software for noise control education
pp. 41-44(4)
Authors: Couvreur, Christophe; Monnoye, Laurent; Schlogel, Cyrille; Chapelle, Pierre

University course on noise given by a distance teaching method
pp. 45-48(4)
Authors: Heydon, John L.; Dawber, Keith R.

A comprehensive approach to management of workplace and environmental noise at NASA Lewis Research Center
pp. 49-52(4)
Author: Cooper, Beth A.

Environmental noise management in the U.S. Army
pp. 53-56(4)
Author: Luz, George A.

Noise control in Poland - Directions of activity
pp. 57-60(4)
Authors: Engel, Zbigniew; Sadowski, Jerzy; Czerwinski, Jan

Policy on the abatement of the industrial noise in the Netherlands
pp. 61-64(4)
Author: Welkers, T.C.

Construction noise control program for the central artery/tunnel - Boston Massachusetts
pp. 65-70(6)
Authors: Couture, Brian W.; Fistel, Milton S.; Towers, David A.

Application of a noise control process within a large industrial facility
pp. 71-76(6)
Authors: Anderson, Robert R.; Brogan, Patricia A.

Noise control engineering at the Aluminum Company of America
pp. 77-84(8)
Author: Gallagher, William D.

Vibroacoustic activity of spur and helical gears
pp. 85-88(4)
Authors: Dabrowski, Zbigniew; Radkowski, Stanislaw

influence of tooth profile error for an epicyclic gear noise
pp. 89-92(4)
Authors: Shoda, Katsuhiko; Furukawa, Toyoaki; Iwanaga, Youichi; Matsunami, Yuji

Noise reduction in hydraulic systems
pp. 93-96(4)
Author: Wilkes, Roy

Comparative representation of measured boundary layer fluctuating pressures and sound power of two different axial fans
pp. 97-100(4)
Authors: Fuest, Th.; Carolus, Th.

Study on noise reduction of a centrifugal fan
pp. 101-104(4)
Authors: Kawai, Naoki; Suzuki, Shoji; Hirokawa, Satoshi; Minorikawa, Gaku

Experimental analysis of noise and vibration of integral horsepower induction motors
pp. 105-108(4)
Authors: Kim, Kwang-Joon; Park, Youn-sik; Cho, Dae-Hyun; Lee, Hyuk

Sound intensity technique: A suitable aid in the design of silent hydraulic pumps
pp. 109-112(4)
Authors: Carletti, E; Vecchi, I

Effect of piston design and weight in the sound power of an engine by means of intensity scanning
pp. 113-116(4)
Authors: de Souza Lima, Joao Luis; Pacheco, Eliezer A.

Reduction of noise radiated from a two-stage catalytic converter using statistical energy analysis
pp. 117-122(6)
Authors: Onsay, T; Moeller, M; Guan, J; Rogers, G; Moore, J

A comparison of annoyance response between ethanol and diesel engines noise
pp. 123-126(4)
Authors: Khan, Md. Shafiquzzaman; Johansson, Orjan; Sundback, Ulrik

An experimental study on internal combustion noise and exhaust gas recirculation of a direct injection diesel engine operating on ethanol
pp. 127-130(4)
Authors: Villarroel, Grover Zurita; Agren, Anders; Pettersson, Esbjorn

Noise prediction of air intake system for vehicle and its application
pp. 131-134(4)
Authors: Toi, Takeshi; Okubo, Nobuyuki

Definitions of limits for tyre/road noise
pp. 135-138(4)
Author: Lucquiaud, Roland

Characterisation of tyre noise by inverse filtering-based contract force reconstruction
pp. 139-142(4)
Authors: Cheung, Wan-Sup; Kim, Gi-Jeun; Kim, Soo-Hyun

The development of a procedure to measure on-road tire sound levels
pp. 143-146(4)
Authors: Thompson, James K.; Williams, Thomas A.

Temperature effect on tire/road noise
pp. 147-150(4)
Authors: Konishi, Satoshi; Fujino, Toshiaki; Tomita, Naotaka; Sakamoto, Masahiko

Mechanism for squeal noise elimination on railway wheels with rings
pp. 151-154(4)
Authors: Nakai, Mikio; Yokoi, Masayuki

Squeals induced by dry friction
pp. 155-158(4)
Authors: Yokoi, Masayuki; Nakai, Mikio

Understanding the noise generation mechanisms of industrial combustion turbines and designing effective noise control treatments
pp. 159-164(6)
Authors: Parzych, David; Schott, George

Electric utility noise abatement
pp. 165-168(4)
Author: Teplizky, Allan M.

Automation of ballast noise test for quality control
pp. 169-172(4)
Authors: Chang, C.L.; Guo, S.F.; Hsieh, H.D.; Yang, T.C.; Lin, C.F.

Noise assessment and noise control recommendations for the Morongo pump station
pp. 173-176(4)
Author: Greene, Rob

NASA noise reduction program for advanced subsonic transports
pp. 177-182(6)
Authors: Stephens, David G.; Cazier, F.W.

The MD-90 for the noise-sensitive airport environment
pp. 183-188(6)
Authors: Blankenship, G.L.; Kapper, C.Y.; May, D.N.

Improved internal exhaust gas mixers for jet noise reduction
pp. 189-194(6)
Authors: Montuori, Paul; Saiyed, Naseem H.

On the drastic propeller-noise increase due to (always present) engine crack-shaft rotational oscillations: A wind tunnel full-scale experimental demonstration
pp. 195-198(4)
Authors: Dobrzynski, W; Gehlhar, B

Correlation of flight test data with vibro-acoustic modelling for aircraft interior noise analysis
pp. 199-202(4)
Authors: Van der Auweraer, Herman; Otte, Dick

Airframe noise source identification using elliptical mirror measurement techniques
pp. 203-206(4)
Authors: Blackner, Anthony M.; Davis, Catherine M.

Sound power levels of road vehicles measured using a reverberant tunnel - statistical analysis
pp. 207-210(4)
Authors: Takahashi, Mitsumasa; Iimura, Kosaku; Hidaka, Yoshito; Tachibana, Hideki

Study of the acoustic field on the high speed train ETR 460, through measurements and computer simulations
pp. 211-214(4)
Authors: Ughi, S; Artom, F; Cingolani, S; Aste, L

Measurement of sound radiation from Shinkansen train by sound intensity method
pp. 215-218(4)
Authors: Hidaka, Yoshito; Yachibana, Hideki; Matsui, Yoshihiro; Kaneko, Ryouichi

Subway noise & vibration characterisitics depending on track systems
pp. 219-222(4)
Authors: Choi, Seok-Joo; Kim, Jong-Hoon; Kim, Seok-Hong

Reduction of the acoustic emissions from an FFG-7 ship service diesel generator
pp. 223-226(4)
Authors: Norwood, Chris; O'Reilly, Michael

Ground-borne vibration from slurry wall trench excavation for the central artery/tunnel project using hydromill technology
pp. 227-232(6)
Author: Towers, David A.

Identification of noise sources in C-frame turret punch press by means of acoustic modal analysis
pp. 233-236(4)
Authors: Yamamoto, Y; Tsutsumi, M

NOise control in quarries: Basic approach and main results at some Italian dredging operations
pp. 237-240(4)
Authors: Benedetto, Guiliana; Patrucco, Mario; Pisani, Raffaele

The application of pass-by technique to agricultural self-propelled machines
pp. 241-244(4)
Authors: Bonini, R; Amadasi, G; Cristaudo, R; Fornaciari, P; Marengo, R; Tarello, M

Heat recovery steam generator noise from duct burners
pp. 245-248(4)
Authors: Brittain, Frank; Norris, Thomas

Major challenges in the control of outdoor noise from combined cycle power plants
pp. 249-256(8)
Author: Putnam, Bob

The critical frequencies of rectangular plates for various thicknesses and surface areas obtained by experimental means
pp. 257-260(4)
Authors: Eager, D.M.; Williamson, H.M.

New approach to the approximation of the radiation efficiency of plates of arbitrary shapes
pp. 261-264(4)
Authors: Pascal, Jean-Claude; Li, Jing-Fang

Method for characterizing aerodynamic sources of sound with applications to computer cooling fans
pp. 265-268(4)
Authors: Reznicek, Mark E; Mongeau, Luc

The interaction between finite in-duct noise sources
pp. 269-272(4)
Authors: de Salis, M.H.F.; Oldham, D.J.

Numerical calculation of spectrum emission and jet noise reduction by injection of mass
pp. 273-276(4)
Authors: Moriniere, V; Gervais, Y; Peube, J-L

Application of chaotic theory to the analysis of aerodynamic noise
pp. 277-280(4)
Author: Gan, W.S.

The application of computational fluid dynamics to the prediction of regenerated noise in ventilation systems
pp. 281-284(4)
Authors: Mak, C.M.; Oldham, D.J.

Aerodynamic noises radiated from surface irregularities of high speed carbody
pp. 285-288(4)
Authors: Sagawa, Akio; Maebashi, Eiichi; Matsuo, Jun; Suzuki, Yasuhumi

Aeroacoustic source assessment of vehicle door gaps
pp. 289-292(4)
Author: Zorea, Silvia I

Sound transmission through a panel due to turbulent boundary layer excitation
pp. 293-296(4)
Author: Mathur, Gopal P

Flowdynamical and acoustical optimization of mufflers to reduce high frequent flow noise at the end pipe outlet
pp. 297-300(4)
Author: Erhard, Christopher A

Frequency control of cavity tone
pp. 301-304(4)
Authors: Minorikawa, Gaku; Maruta, Yoshiyuki

Investigation of the low-frequency acoustical characteristics of a small, low-speed wind tunnel
pp. 305-308(4)
Authors: Brown, Daniel V; Mongeau, Luc G

The vibroacoustic behavior of a rotating annular complex multilayer plate
pp. 309-314(6)
Authors: Atalla, Noureddine; Nicolas, Jean; Cote, Andre; Cournoyer, Benoit; Foin, Olivier

Prediction and measurement of the vibration and acoustic radiation of panels subjected to acoustic loading
pp. 315-318(4)
Authors: Turner, Travis L; Rizzi, Stephen A

Propagation from a broad-band source over grassland: Comparison of data and models
pp. 319-322(4)
Authors: Attenborough, Keith; Li, Kai Ming; Taherzadeh, Shahram

The effect of variations in atmospheric pressure on air attenuation rates
pp. 323-327(5)
Author: Payne, Richard C

Comparison of predicted and measured sound pressure levels within a refraction shadow in the presence of turbulence
pp. 327-330(4)
Authors: Stinson, Michael R; Havelock, David I; Daigle, Gilles A

Seasonal acoustic propagation effect
pp. 331-334(4)
Author: Lundberg, Wayne R

Sound propagation in enclosed factory spaces: Scale-model experiments and ray-tracing predictions
pp. 335-338(4)
Authors: Vermeir, G; Mees, P

The Sabine equation and coupled spaces in churches
pp. 339-342(4)
Author: Carvalho, Antonio Pedro O

Computer prediction of reverberation time using an image-source model
pp. 343-346(4)
Authors: Dance, S.M.; Shield, B.M.

A new model for sound propagation and attenuation in a lined duct with flow
pp. 347-352(6)
Authors: Hansen, Colin H; Bies, David A; Heiland, Tarek

On the structural coupling of wall-axial and fluid-acoustic vibrations in a liquid-filled steel pipe system
pp. 353-356(4)
Authors: Podlesak, M; Norwood, C.J.; Juniper, R.G.

Sound propagation in capillary tubes with mean flow
pp. 357-360(4)
Authors: Ih, Jeong-Guon; Jeong, Kang-Won

A simple model for wave propagation along and across a hose
pp. 361-366(6)
Authors: Munjal, M.L.; Thawani, P.T.

Computer method for calculating eigenvalues in acoustically lined circular ducts with uniform flow
pp. 367-372(6)
Author: Watanabe, Minoru

Examination of effectiveness of afforestation and embankment for noise abatement in the sidelines of airport
pp. 373-376(4)
Authors: Shinohara, Naoaki; Saito, Hisashi; Yamada, Ichiro

Behavior of normal height sound barriers combined with low barriers placed at minimum distances from the railway tracks
pp. 377-380(4)
Authors: Ughi, S; Artom, F; Cingolani, S; Aste, L

Special shapes and treatment for noise barriers
pp. 381-384(4)
Authors: Alfredson, R.J.; Du, X

Improving soundwall performance using route silent
pp. 385-388(4)
Author: Gharabegian, Areg

Measurements of noise reduction by absorptive devices mounted at the top of highway noise barriers
pp. 389-392(4)
Authors: Yamamoto, Kohei; Shono, Yutaka; Ochiai, Hiroaki; Hirao, Yoshihiro

A note on the noise shielding efficiency of a barrier with absorbing obstacle at the edge
pp. 393-396(4)
Authors: Fujiwara, Kyoji; Ohkubo, Tomonao; Omoto, Akira

High sided vehicles and road traffic noise barriers
pp. 397-400(4)
Authors: Hothersall, D.C.; Tomlinson, S.A.

Close-fitting noise enclosure with curved panels and perforated absorbers
pp. 401-404(4)
Author: Ng, C.F.

Prediction method of pump noise transmitted by piping fixation devices
pp. 405-408(4)
Authors: Blanchet, A; Chatel, G

Firearms, noise abatement and suppressors
pp. 409-410(2)
Authors: Honkasalo, Antero; Kyttala, Ilkka

Finite element modeling of dissipative silencers
pp. 411-416(6)
Authors: Peat, K.S.; Rathi, K.L.

The attenuation of a flexible tube silencer depends strongly on the material of the shell
pp. 417-420(4)
Authors: Riemens, Siegfried; Wijnia, Ype K

Prediction and measurement of the acoustic performance of mufflers
pp. 421-424(4)
Author: Wan, G.C.

Wave attenuation by universal venturi tubes
pp. 425-430(6)
Authors: Selamet, A; Dickey, N.S.

A new approach for noise reduction of thin-shell structures
pp. 431-434(4)
Authors: Zhang, Y. Kevin; Yang, Jihe; Lee, Ming-Ran; Prakash, Jay

A multidimensional investigation of circular concentric Helmholtz resonators
pp. 435-440(6)
Authors: Selamet, A; Radavich, P.M.; Dickey, N.S.

A boundary element approach to determine acoustic properties of Helmholtz resonators
pp. 441-444(4)
Authors: Terao, Michihito; Sekine, Hidehisa

Finite element analysis of axial wave propagation in poro-elastic media
pp. 445-448(4)
Authors: Easwaran, V; Lauriks, W; Kelders, L

A non-linear model for flexible porous materials
pp. 449-452(4)
Authors: Khirnykh, K; Cummings, A; Shield, B.M.

Improvement in effect of drainage asphalt pavement on noise reduction
pp. 453-456(4)
Authors: Meiarashi, S; Ishida, M; Nakashiba, F; Niimi, H; Nasebe, M; Nakatsuji, T

Effectiveness of rubberized asphalt in reducing arterial traffic noise in Sacramento County, California
pp. 457-460(4)
Author: Bollard, Paul

The influence of shape and lining configuration on the noise reductions in bends of small air ducts
pp. 461-464(4)
Author: Chanaud, Robert C