INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Influence of noise over the learning process
pp. 901-904(4)
Authors: Recuero, M; Sobreira, M; Gil, C

Evaluation of component contribution to overall product sound quality
pp. 905-910(6)
Author: Pierson, Richard G

Using electronic noise sources to improve the sound quality of fans for air cooled engines
pp. 911-916(6)
Author: Disch, Thomas M

Development of technical listening skills for sound quality assessment
pp. 917-920(4)
Authors: Letowski, Tomasz; Miskiesicz, Andrzej

Objective and subjective analysis of the sound of door slamming
pp. 921-926(6)
Authors: Genuit, Klaus; Sottek, Roland

Perception sensitivity ot interphase relationship between signals, with a special focus on road noise and engine noise
pp. 927-932(6)
Authors: Wyckaert, Katrien; Van der Auwaraer, Herman

The role of low frequency noise and infrasound in sound quality
pp. 933-936(4)
Author: Leventhall, H.G.

New approach regarding the objective evaluation of an exhaust system
pp. 937-942(6)
Authors: Garcia, P; Genuit, K; Strassner, H-J; Fuhrmann, B

Noise quality of transient sounds: An application to the noise emitted by push-push buttons on the control panel of a car
pp. 943-946(4)
Authors: Irato, G; Ruspa, G; Tarzia, A

Quantification of booming nature of sound, Part 1: Objective measure for estimating booming sound
pp. 947-950(4)
Authors: Hashimoto, Takeo; Hatano, Shigeko

Quantification of booming nature of sound, Part 2: Modification of objective measure due to variations of spectrum and loudness of sounds
pp. 951-954(4)
Authors: Hatano, Shigeko; Hashimoto, Takeo

A simple test for determining low frequency rumble sound quality due to HVAC systems
pp. 955-958(4)
Author: Broner, Norman

Categorical unpleasantness of artificial and technical sounds of same loudness
pp. 959-962(4)
Author: Daniel, Peter

An artificial neural network for the assessment of noise annoyance inside passenger vehicles
pp. 963-966(4)
Authors: Prante, Holger U; Brambilla, Giovanni; Diehl, Rolf J

Sound levels under the ocean surface due to sonic boom penetration
pp. 967-970(4)
Authors: Rochat, Judith L; Sparrow, Victor W

Acoustical responses of California gnatcatchers to traffic noise
pp. 971-974(4)
Authors: Asbrey, Frank T; Hunsaker, Don; Church, Robin

Effects of man-made underwater sound on the auditory organs and lateral line of the Oscar (Astronotus Ocellatus) - Preliminary results
pp. 975-978(4)
Authors: Finneran, James J; Hastings, Mardi C; Popper, Arthur N; Lanford, Pamela J

Physical effects of noise on fishes
pp. 979-984(6)
Author: Hastings, Mardi C

Effects of low-altitude overflights on populations of small mammals on the Barry M. Goldwater range
pp. 985-990(6)
Authors: McClenaghan, Lee; Bowles, Ann E

Sound from low-altitude jet overflights in burrows of the Merriams's Kangaroo Rat, Dipodomys Merriami, and the Kit Fox. Vulpes Macrotis
pp. 991-994(4)
Authors: Francine, Jon K; Yaeger, J. Scott; Bowles, Ann E

Field measurements of Merriam's Kangaroo Rat, Dipodomys Merriami, hearing on the Barry M. Goldwater Air Force range using auditory evoked potentials
pp. 995-998(4)
Authors: Francine, Jon K; Bowles, Ann E

Effects of different levels of simulated highway noise on reproduction in the Zebra Finch (Taeniopygia Guttata)
pp. 999-1003(5)
Author: Church, Robin R

Development in environmental noise management
pp. 1003-1008(6)
Author: Dickinson, Philip

Factors affecting annoyance caused by road traffic noise
pp. 1009-1012(4)
Author: Ishiyama, Takeshi

Prioritization of noise control measures in industry
pp. 1013-1016(4)
Authors: Bistafa, Sylvio R; Meduri, Marcos V

Characterization of the ante-operam acoustic climate for the railway lines at high speed
pp. 1017-1020(4)
Author: Facchinetti, Sergio

Fuzziness and acoustic qualiity
pp. 1021-1024(4)
Authors: Slama, Jules Ghislain; da Silve de Sousa, Denise

Remarks on noise levels of low frequency impulse sound for correlation purposes with annoyance
pp. 1025-1028(4)
Author: Hirsch, Karl-Wilhelm

The correct conversion of time-weighted noise ordinances limits to equivalent energy level (LEQ)
pp. 1029-1032(4)
Author: Birckson, Ellwyn

Methods to evaluate noise impacts due to a new continuous noise
pp. 1033-1038(6)
Authors: Nugent, Ramon E; Lind, Stephen J

Baffle plate method for measurement of noise produced by wind turbines
pp. 1039-1042(4)
Authors: Jiricek, Ondrej; Konicek, Petr

Acoustic characteristics of the bazooka speaker
pp. 1043-1048(6)
Authors: Kim, Jun-Tai; Choi, Jou-Young

The DeltaTron microphone preamplifier
pp. 1047-1050(4)
Author: Gade, Svend

Practical improvements to the measurement of some acoustic parameters of buildings
pp. 1051-1054(4)
Author: Tyler, Richard G

The development of precision sound level meters using fully digital technique
pp. 1055-1058(4)
Authors: Takazawa, Atsuyuki; Amanuma, Teiji; Kanamori, Tetsuya; Yamaguchi, Kiminori

A new concept in hand-held, battery operated instruments for real-time sound and vibration analyses
pp. 1059-1062(4)
Authors: Bak, Peter; Hojberg, Klaus; Svensgaard, Poul

Simultaneous measurement of all relevant parameters for environmental noise analysis
pp. 1063-1066(4)
Authors: Bak, Peter; Hojbjerg, Klaus; Svensgaard, Poul

An automatic calibration system for acoustical instruments
pp. 1067-1070(4)
Authors: Wu, Lixue; Wong, George W.K.

Current issues in the standardisation of sound level meters and sound calibrators
pp. 1071-1074(4)
Author: Dowson, Susan P

Intensity calculation and measurement in the hydroacoustic nearfield of a vibrating structure
pp. 1075-1080(6)
Authors: Nolte, Bodo; Gaul, Lothar

An intercomparison of the accuracy and speed of sound power measurements using ISO standards and draft standards
pp. 1081-1084(4)
Authors: Keith, S.E.; Bly, S.H.P.; Krishnappa, G

Use of synchronous time averaging to extract signals from noise
pp. 1085-1088(4)
Authors: Sacks, Mal P; Buttell, John

Spatial Fourier transform method to measure reflection coefficients of a finite size material at oblique incidence
pp. 1089-1092(4)
Authors: Kim, Sang-Lyeol; Kim, Yang-Hann

Surface impedance measurement with spherical wave reflection coefficient for inhomogeneous samples
pp. 1093-1096(4)
Authors: Mellert, Volker; Nocke, Christian; Teuber, Sabine

Mesurement of impulsive noise
pp. 1097-1100(4)
Author: Rasmussen, Gunnar

Noise/force sensitivity mapping for vehicle interior acoustics, using reciprocity techniques
pp. 1101-1104(4)
Authors: Plunt, Juha; Rigner, Lars; Gabrielsson, Lars

Monopole airborne sound source with in situ measurement of its volume velocity
pp. 1105-1108(4)
Authors: Verheij, Jan W; Van Tol, Floris H; Hopmans, J.M.

Experimental evaluation of the diffusity of a reverberation room
pp. 1109-1112(4)
Authors: Cops, A; Leppens, K

Adaptation of existing test facilities to low frequencies measurements
pp. 1113-1116(4)
Author: Roland, Jacques

Using correlations between acoustic and mechanical vibration measurements of universal AC motor to analyse the motor signature
pp. 1117-1120(4)
Author: Ozturk, Cuneyt

Use of conditioned spectra to differentiate between flow noise and machinery noise
pp. 1121-1124(4)
Authors: Giangreco, C; Wagstaff, P.R.; Henrio, J.C.; Langlois, E

Speech enhancements in multiple speaker condition using adaptive comb filter
pp. 1125-1128(4)
Authors: Chisaki, Yoshifumi; Usagawa, Tsuyoshi; Ebata, Masanao

Advanced in acoustic recognition of aircraft noise events
pp. 1129-1132(4)
Authors: Adams, Keith; Esler, Brett

Excessive vibration of a small steam turbine: Diagnosis and remedy
pp. 1133-1136(4)
Authors: Orlowski, Zenon; Galka, Tomasz

Observations of vibration-induced microcracks in steel using modal analysis
pp. 1137-1142(6)
Authors: Swanson, D.C.; Nickerson, G.W.

A comparative study of a model-based demodulation algorithm and other algorthms for detection of gear defects
pp. 1143-1148(6)
Authors: Li, C.J.; Limmer, J; Yoo, J

Gas turbine diagnosis by means of noise and vibration measurements and analysis
pp. 1149-1152(4)
Authors: Segal, Anna; Bogorad, Edgar

The use of reciprocity theory in the transformer noise identification
pp. 1153-1156(4)
Author: Hu, Z

Application of wavelet transform techniques for imaging wideband acoustic noise sources
pp. 1157-1162(6)
Author: Sibul, Leon H

Determination of the number of independent input transducers for multiple-input/output models
pp. 1163-1166(4)
Authors: Kompella, Murray S; Bernhard, Robert J

Reconstruction of the incident sound field on a partition to quantify machinery air-borne sound path
pp. 1167-1170(4)
Authors: Chatel, G; Chevalier, M; Ginoux, J.M.

Identification of coherent/incoherent noise sources in general acoustic environment by using line array
pp. 1171-1174(4)
Authors: Choi, Jae-Woong; Kim, Yang-Hann

Source localization with a two-dimensional focused array: Optimal signal processing for a cross-shaped array
pp. 1175-1178(4)
Author: Elias, Georges

A broad band signal processor for acoustic imaging in noise control applications
pp. 1179-1182(4)
Authors: Olivieri, Marc; Glegg, Steward A.L.

2-D sensor array configurations and its use in noise source visualization
pp. 1183-1188(6)
Authors: Wang, Percy F; Davies, Patricia; Takata, Hiroshi

The use of bispectral technique for cancellation of noise in the sounded signals processing
pp. 1187-1190(4)
Authors: Minfen, Shen; Lisha, Sun

Application of dynamical analysis to noise control
pp. 1191-1194(4)
Authors: Caughey, T.K.; Zaremba, S.M.

Characterisation of flame noise in the burner of a comestic central heating system by inverse techniques and singular value decompostion
pp. 1195-1198(4)
Authors: Schubert, G; Luo, Q; Wagstaff, P.R.; Henrio, J.C.; Guedel, A

Modeling internal acoustics of a compressor discharge manifold
pp. 1199-1204(6)
Author: Nieter, J.J.

Optimization strategies for minimum interior noise and weight using FEM/BEM
pp. 1205-1208(4)
Authors: Engelstad, S.P.; Cunefare, K.A.; Crane, S; Powell, E.A.

Mid-frequency range vibro-acoustic simulation using freqeuncy response technique
pp. 1209-1212(4)
Author: Lim, Teik Chin

A general propagative approach for the energy flow models and the heat conduction analogy of one-dimensional systems
pp. 1213-1216(4)
Authors: Ichchou, M.N.; Jezequel, L

Possibilities to generalize the heat transfer approach to vibration of plates problems
pp. 1217-1220(4)
Authors: Djimadoum, M; Guyader, J.L.

Prediction of high frequency vibrations in coupled plates using energy finite elements
pp. 1221-1226(6)
Authors: Huff, John E; Bernhard, Robert J

A new coupling loss factor for highly damped beams and plates
pp. 1227-1232(6)
Author: Haberman, Robert C

Transient structure borne energy analysis by using SEA
pp. 1233-1238(6)
Authors: Honda, Iwao; Irie, Yoshihiko

Statistical energy analysis modeling of a passenger vehicle
pp. 1239-1242(4)
Authors: Chee, Hengyee; Qian, Ping; Cimerman, Benjamin

System model of a high speed train passenger coach using S.E.A and prediction in working conditions
pp. 1243-1246(4)
Authors: Borello, G; Cuny, N; Geoffroy, P

SEA models for transmission loss of double-wall designs
pp. 1247-1252(6)
Authors: Manning, Jerome E; Hebert, Benjamin F

Modal energy analysis of aircraft sidewall response to acoustic fields
pp. 1253-1258(6)
Authors: Tran, Boi N; Mathur, Gopal P; Bremner, Paul G

SEA: Using the active and the reactive part of pure tone power injected to investigate power flows
pp. 1259-1262(4)
Authors: Adobes, A; Le Bot, A

Statistics on the power injection method
pp. 1263-1266(4)
Authors: De Langhe, K; Sas, P

Indirect coupling: An ordeal or benefit for energy flow models?
pp. 1267-1270(4)
Author: Fredo, Claes R

Energy flow between two coupled plates: Finite element and statistical energy analyses
pp. 1271-1274(4)
Authors: Mace, B.R.; Rosenberg, J

An axi-symmetric finite element formulation of the acoustic wave propagation in a confined moving fluid medium
pp. 1275-1278(4)
Authors: Chau, M.T.; Marquette, G; Chouik, A

A finite element model for predicting the acoustic transmission characteristics of layered structures
pp. 1279-1282(4)
Authors: Coyette, J.P.; Wynendaele, H

Finite element models for predicting the effect of edge constraints on sound transmission through finite and lined double panel structures
pp. 1283-1286(4)
Authors: Kang, Y.J.; Bolton, J.S.

Comparison of measured data and finite element analysis for low frequency acoustic response of a payload fairing
pp. 1287-1290(4)
Author: Hebert, Benjamin F

Sensitivity analysis: An enclosed sound field computational tool
pp. 1291-1294(4)
Authors: Miccoli, G; Sarti, S

Numerical prediction of sound transmission through multilayer structures with isotropic elastic porous materials
pp. 1295-1298(4)
Authors: Atalla, Noureddine; Panneton, Raymond

Equivalent sources method for noise prediction problem: Analysis of errors
pp. 1299-1302(4)
Author: Tomilina, T.M.

Structural noise induced vibration prediction for a component of a launch vehicle
pp. 1303-1308(6)
Authors: Vallance, Charles; Vlahopoulos, Nickolas

Superposition method (SUP) as a potential tool to predict acoustic radiation from industrial machines
pp. 1307-1312(6)
Authors: Laissus, J.J.; Guyader, J.L.

Acoustic diagnostic analysis of automobile passenger compartments
pp. 1313-1316(4)
Authors: Zhang, Y.K.; Lee, M.R.; Trevelyan, J; Adey, R.A.; Niku, S.M.; Brebbia, C.A.

A multi-domain boundary element method for modelling acoustic radiation and scattering problems
pp. 1317-1320(4)
Authors: Cremers, L; Fyfe, K.R.; Sas, P

A new boundary element model for handling comples acoustic problems
pp. 1321-1324(4)
Authors: Coyette, J.P.; Wynendaele, H

Wave-based road noise barrier attenuation modelling
pp. 1325-1328(4)
Authors: Fyfe, K.R.; Harrison, C; Cremers, L

A general method to analyze acoustic cavaities enclosed by structure with absorbent lining
pp. 1329-1332(4)
Authors: Kim, Jay H; Hong, Kin L

An exact solution for the acoustic radiation from a finite length circular duct
pp. 1333-1336(4)
Authors: Hewlett, D.A.K.; Nelson, P.A.; Morfey, C.L.

The measurement of natural frequencies and mode shapes of submerged cylinders using PVDF strip excitation
pp. 1337-1340(4)
Author: Norwood, Chris