INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Wavelet analysis of nonstationary acoustic and vibration signatures
pp. 1903-1906(4)
Authors: Shin, Young S.; Jeon, Jae-Jin

Generation of stationary non-gaussian noise sequences with specified power spectra
pp. 1907-1910(4)
Authors: Minfen, Shen; Lisha, Sun

Estimation of power spectral density by singular valued modification
pp. 1911-1914(4)
Authors: Wang, Percy F.; Davies, Particia; Takata, Hiroshi

Development of new sensor using sound to detect mistransfering plural sheets
pp. 1915-1918(4)
Authors: Sakamoto, Shuichi; Ichimiya, Ryoichi

Development of experimental techniques to minimize the leakage errors involved in FFT based measurements
pp. 1919-1922(4)
Author: Ozturk, Cuneyt

On-line quality inspection system for electroacoustic products
pp. 1923-1926(4)
Authors: Lin, H.C.; Yang, T.C.

Rotating-machine diagnosis based on the 2nd and 3rd order spectral analysis of sounded noise
pp. 1927-1930(4)
Authors: Sasaki, Kimio; Mukai, Tomoski

Classification of abnormal noise factors on small motors with neural network
pp. 1931-1934(4)
Authors: Matsubayashi, Katsushi; Kosaka, Toshifumi; Kitamura, Toshiya; Yamada, Shinji

Ulrasonic measurement of tortuosity on acoustic porous material
pp. 1935-1938(4)
Authors: Henry, M.; LaFarge, D.; Castagnede, B.

New approach for the measurement of the acoustic properties of sound absorbent samples
pp. 1939-1942(4)
Authors: Cheung, Wan-Sup; Jun, Oh-Sung; Kim, Soo-Hyun

The measurement of airflow resistance by DC method and AC method
pp. 1943-1946(4)
Authors: Nakagawa, Hiroshi; Ohashi, Shinji; Ohara, Yoshiko; Ogawa, Tomotatsu; Shima, Hiroshi; Yamaguchi, Michiyuki

The development of the metadyne anechoic wedge system
pp. 1947-1950(4)
Authors: Duda, John; Kurobe, Yoshiyuki

A measuring method for sound reflection or absorption coefficient by using two closed microphones with different sensitivities
pp. 1951-1954(4)
Author: Iwase, Teruo

Average sound pressure measurement in a room using a double pendulum
pp. 1955-1958(4)
Authors: Okoshi, Masaru; Yamagami, Tohru; Kido, Ken'ichi; Ohashi, Masanao; Suzuki, Hideo

Microphones, preamplifiers and calibration: New products and new possibilities
pp. 1959-1962(4)
Authors: Ginn, Bernard; Frederiksen, Erling; Gramtorp, Johan; Larsen, Helge

A sensitivity compensation method for a three-dimensional sound intensity probe
pp. 1963-1966(4)
Authors: Suzuki, Hideo; Oguro, Shun; Anzai, Masazou; Ono, Takahiko; Kim, Suk-Jae; Kim, Chun-Duk

The development of instruments for the measurement of sound intensity using 3-dimensional microphone probe
pp. 1967-1970(4)
Authors: Yamaguchi, Kiminori; Hori, Kazuki; Tanaka, Takashi; Anzai, Masazou

Assessment of LAeq level of urban noise by means of time histroy pattern
pp. 1971-1974(4)
Authors: Brambilla, G.; Carletti, E.; Carretti, M.R.

Experimental study on resonance frequency of horizontal vibration pickup
pp. 1975-1978(4)
Authors: Yokota, Akinori; Okamoto, Nobuhisa; Komura, Hidemichi; Kurosawa, Takahiro

Developments in digital signal processing for handheld portable electroacoustic instrumentation
pp. 1979-1982(4)
Authors: Tyler, Richard; Darlington, Paul

Time domain constribution analysis
pp. 1983-1986(4)
Authors: Mizuno, K.; Murakami, K.; Kudoh, H.; Hamada, H.

A signal processing for wind noise cancellation by using a wide sense digital filter in the low frequency sound measurement
pp. 1987-1990(4)
Authors: Miyata, Shigeharu; Ohta, Mitsuo

Identification of machine noise radiators using intensity, Holography and modal analysis techniques
pp. 1991-1994(4)
Author: Panov, S.N.

Identification of industrial noise sources with finite band of frequencies based on spherical wave model
pp. 1995-1998(4)
Authors: Choi, Jae-Woong; Kim, Yang-Hann

Improvement of acoustical detection of aircraft position in flight
pp. 1999-2002(4)
Authors: Makino, Koichi; Yamada, Ichiro; Hayashi, Noriaki

The finite element treatment of large size coupled problems using unequal meshes
pp. 2003-2006(4)
Authors: Coyette, Jean-Pierre; Dubois-Pelerin, Yves; Migeot, Jean-Louis

Finite element formulation for sound transmission through finite elastic porous materials
pp. 2007-2010(4)
Authors: Kang, Y.J.; Bolton, J.S.

Finite elemental analysis of sound fields in rooms with sound absorbing materials
pp. 2011-2014(4)
Authors: Otsuru, Toru; Fujii, Kasuhisa

The energy finite element method for coupled structures
pp. 2015-2018(4)
Authors: Cho, Phillip E.; Bernhard, Robert J.

A comparative study of the analysis of transient acoustic problems using finite element and boundary element methods
pp. 2019-2022(4)
Authors: Coyette, Jean-Pierre; Wynendaele, Hans

Correlation of acoustical modal analysis with operating data for road noise problems
pp. 2023-2026(4)
Authors: Wyckaert, Katrien; Van der Auweraer, Herman; Hendricx, Wim

Some analytical aspects on structural-acoustic interaction phenomena in a closed field
pp. 2027-2030(4)
Authors: Ohnishi, Keizo; Okura, Kiyoshi

Energy flow within three subsystem configurations
pp. 2031-2034(4)
Author: Fredo, Claes R.

Application of a statistical inverse method to improve parameter estimation in statistical energy analysis
pp. 2035-2038(4)
Authors: Adobes, A.; Nahya, D.

A SEA model for predicting the insertion loss of noise source enclosures
pp. 2039-2042(4)
Author: Ren, Mingzhang

Statistical energy analysis of vibration and sound radiation of multi-sectional cylindrical shells
pp. 2043-2046(4)
Author: Bernblit, Michael V.

The analysis of bending vibration of plate combinations at low and high frequencies
pp. 2047-2050(4)
Authors: Gibbs, B.M.; Moorhouse, A.T.

Bending vibrations of ribbed plates
pp. 2051-2054(4)
Author: Nikiforov, A.

Change of source impedance due to close fitting rigid screen
pp. 2055-2058(4)
Authors: Lee, Jun-Shin; Ih, Jeong-Guon

The influence of a rigid barrier on the radiation efficiency of a sound source
pp. 2059-2062(4)
Authors: Kato, Masana; Shibata, Katsuhisa; Takatsu, Nubuo; Ueda, Kazumasa

Analysis of acoustic characteristics of automobile horn by simplified vibration model
pp. 2063-2066(4)
Authors: Suh, Sang Joon; Jho, Moon Jae; Mo, Jong Woon; Cha, Hang Byung

Vibration response of foundation of wooden house
pp. 2067-2070(4)
Author: Fujikake, Toshio

Prediction of airborne noise acoustic insulation of light panels
pp. 2071-2074(4)
Authors: Sobreira, M.; Recuero, M.

Mapping neural network and application to the prediction of Leq
pp. 2075-2078(4)
Authors: Imai, Kanenori; Kuno, Kazuhiro

On-line state estimation algorithms for road traffic noise indexes under the contamination of background noise
pp. 2079-2082(4)
Authors: Hiromitsu, Seijiro; Ohta, Mitsuo

A state estimation method based on the wide-sense digital filter employing higher order correlation information for the reverberation curve in the room contaminated by a background noise
pp. 2083-2086(4)
Authors: Ogawa, Hitsohi; Ohta, Mitsuo; Hatakeyama, Kazutatsu

Prediction of output probability distribution for arbitrary sound insulation systems based on the introduction of hierarchical parameter differential operator and its application to a double wall with sound bridge
pp. 2087-2090(4)
Authors: Takaki, N.; Ohta, M.

An evaluation method of probability distribution on Leq for nonstationary environmental noise based on its level statistics
pp. 2091-2094(4)
Authors: Nishimura, Kiminobu; Ohta, Mitsuo

An introduction of regression model in hierarchical form for the response probability prediction of a working environmental system
pp. 2095-2098(4)
Authors: Mitani, Yasuo; Ohta, Mitsuo

Modeling for environment noise by the dynamic model
pp. 2099-2102(4)
Authors: Shibayama, Hideo; Nishigori, Teruko; Nakamura, Shin'iti; Sano, Fujiharu

The Rende-Cosenza highway: Forecasting calculation of the acoustical reclamation
pp. 2103-2106(4)
Authors: Ughi, S.; Artom, F.; Cingolani, S.; Costantini, M.; Teghillo, F.

Application of the multivaried statistical analysis for the determination of previsional models of acoustic impact for city-streets
pp. 2107-2110(4)
Authors: Cellura, M.; Di Matteo, U.; Sferlazzo, G.

Doppler effect for a car moving in a tunnel
pp. 2111-2114(4)
Author: Rapin, Jean-Marie

Modeling of enhanced sound propagation at a California airport
pp. 2115-2118(4)
Author: Buntin, Jim

Geometrical acoustics as a predictive design tool
pp. 2119-2122(4)
Author: Lai, J.C.S.

Numerical modeling in geometrical acoustics with applications in industrial noise control
pp. 2123-2126(4)
Author: De Geest, E.

The effect on prediction accuracy of reducing the number of rays in a ray-tracing model
pp. 2127-2130(4)
Authors: Dance, S.M.; Shield, B.M.

Matrix model of diffuse reflection (M.M.D.R.)
pp. 2131-2134(4)
Authors: Rodriguez, Trillan J.; Magrans, F.X.

Numerical analysis of sound propagation over wide barriers
pp. 2135-2138(4)
Authors: Shimoda, Hidemaro; Matumoto, Eiichiro

The influence of directivity of point sources on the result of predicting environmental noise from industrial plants
pp. 2139-2144(6)
Authors: Zuchowicz-Wodnikowska, Iwonna; Czyzewski, Kazimierz

Comparative severities for national noise regulations
pp. 2145-2148(4)
Authors: Maurin, Michel; Vernet, Isabelle

Noise legislation and criteria in China
pp. 2149-2152(4)
Author: Cheng, Mingkun

Industrial noise and solution of noise abatement problems in Lithuania
pp. 2153-2156(4)
Author: Guzhas, D.

Noise control policy and economic analysis
pp. 2157-2160(4)
Author: Mattei, Jean P.

Evaluation of the cost of noise pollution
pp. 2161-2164(4)
Authors: So, Michiko; Goto, Hajime

Cost effecient noise prediction around large plants using genertic algroithm optimisation
pp. 2165-2170(6)
Author: Botteldooren, D.

Realtime audio and sound analyzer ASA-1, ASA-2
pp. 2171-2172(2)
Author: Anonynous

Edolas acoustic laboratory proposal for a super comfortable sound surrounding
pp. 2173-2174(2)
Author: Anonymous

2 channel real-time octave band analysis using a general purpose FFT analyzer
pp. 2175-2176(2)
Author: Anonymous

Solving noise problems in industry
pp. 2177-2178(2)
Author: Anonymous

Maxion: A crosspoint switch based multi-processor architecture for real time
pp. 2179-2180(2)
Author: Cohen, Hannk

Acoustic analysis system SYSNOISE Revision 3.0
pp. 2181-2182(2)
Author: Matsushima, Hiroaki

Solid multi-porous sound absorption material (Porecell)
pp. 2183-2184(2)
Author: Anonymous

64 channel data processing system
pp. 2185-2186(2)
Author: Anonymous

Route silent (noise-barrier)
pp. 2187-2188(2)
Authors: Furuta, N.; Yamamura, S.

New system for estimating damping characteristics of materials
pp. 2189-2190(2)
Author: Daimon, S.

Soundscape project of Yokohama City
pp. 2191-2192(2)
Author: Anonymous

Multi-channel 1/N-octave band real-time analyser SA-28
pp. 2193-2194(2)
Author: Iwahashi, Kiyokatsu

Dasbox and PV-wave
pp. 2195-2196(2)
Author: Nakagawa, John S.

Acoustical characteristics of an automatic sliding sound-proof door
pp. 2197-2198(2)
Author: Anonymous

Head-related binaural measurement technology
pp. 2199-2200(2)
Author: Anonymous

Noise Cancellation Technologies, Inc - Products and developments
pp. 2201-2202(2)
Author: Hulings III, Willis J.

Numerical acoustic analysis with COMET/Acoustics
pp. 2203-2204(2)
Author: Vlahopoulos, Nickolas

CEL Instruments new real time sound level analysers
pp. 2205-2206(2)
Author: Hooper, Tim

Noise data logging and storage
pp. 2207-2208(2)
Author: Wallis, Alan D.

Overall presentation and new features of the AutoSEA software package for statistical energy analysis
pp. 2209-2210(2)
Author: Bremner, P.G.

Acoustic One - A powerful alliance for sound and vibration
pp. 2211-2212(2)
Author: Anonymous

Watching robot for working noise and vibration
pp. 2213-2214(2)
Author: Terazono, Shinichi

Coustone
pp. 2215-2216(2)
Author: Chadwick, Eric

Kajima techniques for controlling sound and vibration
pp. 2217-2218(2)
Author: Anonymous

Sasakura Aero-Acoustic Laboratory
pp. 2219-2220(2)
Authors: Kurobe, Yoshiyuki; Miyamura, Hiroshi

Noise control elements and engineering
pp. 2221-2222(2)
Author: Anonymous

Noise control system of NGK
pp. 2223-2224(2)
Author: Anonymous

ENM - Environmental noise model
pp. 2225-2228(4)
Author: Tonin, Renzo

Reducing construction din in Hong Kong?
pp. 2229-2232(4)
Authors: Wong, C.L.; Chau, W.; Ho, D.

Noise of fluid coupling gear box deceleration systems and its measurement
pp. 2233-2236(4)
Authors: Okano, Katsuo; Matsuda, Michinki; Kimura, Katsumi

Optimal control of sound reduction in thin plate by use of piezoelectric ceramics
pp. 2237-2240(4)
Authors: Mitani, Yuichiro; Akisiiita, Sadao; Okamoto, Tsutomu

Punching noise reduction of punch press using high damping alloy as punch press frame
pp. 2241-2244(4)
Authors: Kobayashi, H.; Suzuki, T.; Muta, T.; Yamada, T.; Hattori, K.