INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Engineering for sound quality
pp. 3-8(6)
Author: Lyon, Richard H.

Industry - Relevant areas of Navy research
pp. 9-14(6)
Author: Blake, W.K.

Dynamics of disordered periodic structures
pp. 15-36(22)
Author: Lin, Y.K.

Control of tones by periodic tip lift variation in ducted turbomachinery
pp. 37-42(6)
Author: Farrell, Kevin J.

Fan noise research at NASA
pp. 43-52(10)
Author: Groeneweg, John F.

Acoustical and fluid dynamic similarity for air-moving device measurements on the ANSI test plenum
pp. 53-58(6)
Author: Taylor, Lisa R.

A systematic case study to improve sound quality of an automotive climate control system
pp. 59-64(6)
Authors: Humbad, Niranjan G.; Thawani, Prakash T.

Controlling computer fan noise emissions
pp. 65-70(6)
Authors: Dunens, Egons K.; Radziunas, Jeffrey P.

Active control of axial fan noise
pp. 71-76(6)
Authors: MacGillivray, J.; Lauchle, G.C.

Improved speed controller helps reduce air mover noise emissions for world wide applications
pp. 77-80(4)
Author: Veazey, William M.

Determination of noise sources in a forward-curved centrifugal blower using flow visualization methods
pp. 81-86(6)
Authors: Ishihara, Yuji; George, Albert R.

Electromagnetic noise problems of the series fractional horse power motors
pp. 87-92(6)
Authors: Ozturk, Cuneyt; Balikcioglu, Ahmet

Transmission loss characteristics of aircraft sidewall systems to control cabin interior noise
pp. 93-98(6)
Authors: Yesil, Oktay; Serati, Paul M.; Hofbeck, Eric V.; Glover, Billy M.

Comparison of innovative approaches to noise pollution evaluation
pp. 99-104(6)
Authors: Cammarata, G.; Fichera, A.; Graziani, S.; Marletta, L.

The contribution to the overall noise level of the vibration of an open bridge deck
pp. 105-110(6)
Authors: Tournour, Michel A.; Cuschieri, Joseph M.

Development of experimentally based structural/acoustic automobile tire noise models
pp. 111-116(6)
Authors: Roggenkamp, Timothy J.; Kompella, Murty S.; Bernhard, Robert J.

Tire noise resulting from an open grid bridge deck
pp. 117-122(6)
Authors: Gregory, Scott; Cuschieri, Joseph M.

Transfer function techiques for automotive interior noise due to the induction system
pp. 123-132(10)
Authors: Eversman, Walter; White Jr., John A.

Assessing human perception of aerodynamic automotive noise
pp. 133-138(6)
Author: Zorea, Silvia I.

Synchronous tone ventilation noise in automotive alternators
pp. 139-144(6)
Authors: Frederick, Dean M.; Lauchle, Gerald C.

Community noise impact of the conversion from conventional diesel-powered trains to high-speed electric trains on the northeast corridor
pp. 145-150(6)
Author: Towers, David A.

Psychoacoustic tests on tramway noise
pp. 151-156(6)
Authors: Abdel Alim, O.; Zaki, N.

Determination of the hydro-acoustic transfer matrix and sources of a pump. An experimental method
pp. 157-162(6)
Authors: Lauro, Jean-Francois; Boyer, Alain

Design modification for suppression of radiated noise from a fiber crimping machine
pp. 163-168(6)
Authors: Saunders, William R.; Gibbs, Gary P.; Sardello, Joseph; Johnson, Thomas E.

On the noise of percussion drill steel rods
pp. 169-174(6)
Authors: Champoux, Y.; Oddo, R.; Guigou, C.; Atalla, N.

Small diameter in-the-hole percussion drilling tool for percussion drill noise control
pp. 175-180(6)
Author: Bartholomae, Roy C.

Recommended octave band insertion losses of heat recovery steam generators used on gas turbine exhaust systems
pp. 181-186(6)
Author: Johnson Sr., Robert S.

Longitudinal waves in fluid loaded composite cylinders
pp. 187-192(6)
Author: Dayal, Vinay

Current topics of flow nosie research
pp. 193-202(10)
Author: Farabee, Theodore M.

Sound radiation and scattering by localized vortices
pp. 203-208(6)
Author: Skvortsov, A.T.

Empirical refinements to boundary layer transition noise models
pp. 209-214(6)
Authors: Marboe, Richard B.; Lauchle, Gerald C.

Effect of weak periodic pressure gradient on streamwise vortices near a wall
pp. 215-218(4)
Authors: Dhanak, M.R.; Neravetla, B.R.

Sound radiation from structures in the presence of close-fitting sound shields
pp. 219-224(6)
Authors: Augusztinovicz, F.; Sas, P.; Penne, F.

Acoustic scattering from two finite fluid-loaded co-planar coupled plates
pp. 225-230(6)
Authors: Kaina, Rachid; Cuschieri, Joseph M.

Influence of sound transmission path anomalies upon effectiveness of active or passive sound barriers for transformers
pp. 233-236(4)
Author: Angevine, Olivier L.

Prediction of response probability distribution for various type sound wall systems contaminated by a background noise
pp. 237-242(6)
Authors: Takaki, Naomitsu; Ohta, Mitsuo

New calculation method to locate silencers and catalyst converters in a car's exhaust system
pp. 243-248(6)
Author: Erhard, Christoph A.

Computer aided design of automotive air conditioner mufflers
pp. 249-254(6)
Authors: Thawani, Prakash T.; Nava, J. Antonio

The Herschel-Venturi tube
pp. 255-260(6)
Authors: Selamet, A.; Kim, Y.; Dickey, N.S.; Novak, J.M.

Multi-dimensional effects on silencer performance
pp. 261-266(6)
Authors: Selamet, A.; Radavich, P.M.; Dickey, N.S.

On hydraulic model of conventional Helmholtz resonator-silencer operating in high intensity noise field
pp. 267-270(4)
Author: Semenov, Andrew G.

Recent trends in the development of active sound and vibration control systems
pp. 271-278(8)
Author: Eriksson, L.J.

Estimating acoustic radiation using wavenumber sensors
pp. 279-284(6)
Authors: Sommerfeldt, Scott D.; Scott, Brian L.

Selecting numbers of transducers, filter lengths for neutralized-feedforward active noise control
pp. 285-290(6)
Author: Chou, Kenneth C.

Large-scale, broadband actuator selection for active noise control
pp. 291-296(6)
Authors: Heck, Larry P.; Naghshineh, Koorosh

Improvement of the estimate of the speaker-error microphone transfer function in an active noise controller
pp. 297-302(6)
Authors: Minguez, A.; Recuero, M.

Virtual sensors and actuators for active control of vibration in rotational degrees of freedom
pp. 303-308(6)
Authors: Ruckman, C.E.; Su, J.H.

Achievements and tasks for active noise control
pp. 309-314(6)
Author: Tichy, Jiri

Active control of complex noise problems using a broadband, multichannel controller
pp. 315-320(6)
Authors: Peterson, D. Kent; Weeks, William A.; Nowlin, William C.

A frequency-domain multichannel optimal adaptive algorithm for active control of sound and vibration
pp. 321-324(4)
Author: Shen, Qun

Causality constraints of adaptive active control algorithms
pp. 325-330(6)
Author: Brokish, Charles W.

Performance evaluation of various active noise control algorithms
pp. 331-336(6)
Authors: Char, Kavita; Kuo, Sen M.

Fixed-point DSP implementation of active noise control systems
pp. 337-342(6)
Authors: Kuo, Sen M.; Nadeski, Mark; Horner, Tom; Chyan, Jason; Panahi, Issa

Geometric compositions in the design of active noise control systems
pp. 343-348(6)
Author: Tokhi, M.O.

An active control procedure to reduce in a broad space the noise created by a vibrating panel into a room
pp. 349-354(6)
Authors: Simon, F.; Pauzin, S.

When the quiet zone needn't be quiet: Separating speech from noise in active noise control
pp. 355-360(6)
Author: Nowlin, William C.

Anti noise applied to a vacuum pump in a chemical plant
pp. 361-366(6)
Author: van Overbeek, M.W.R.M.

Prediction of multiple-input active control of road noise in automobile interiors
pp. 367-372(6)
Authors: Heatwole, Craig M.; Bernhard, Robert J.

Broadband active vibration control of a beam using experimentally obtained impulse functions
pp. 373-378(6)
Authors: Naghshineh, K.; Gellrich, C.A.

Active control of turbomachine discrete tones
pp. 379-388(10)
Author: Fleeter, Sanford

Active control of interior noise in a business jet using pieaoceramic actuators
pp. 389-394(6)
Authors: Fuller, Chris R.; Gibbs, Gary P.

Analytical investigation of adaptive control of radiated inlet noise from turbofan engines
pp. 395-402(8)
Authors: Fisi, John D.; Burdisso, Ricardo A.

A numerical study of active structural acoustic control in a stiffened, double wall cylinder
pp. 403-408(6)
Authors: Grosveld, F.W.; Coats, T.J.; Lester, H.C.; Silcox, R.J.

Active acoustic and structural acoustic control of car cabin noise - Experimental study on a scale model
pp. 409-414(6)
Authors: Dehandschuttier, W.; Sas, P.; Bao, C.

Active attenuation of motor/blower noise
pp. 415-420(6)
Authors: Nowicki, Christopher P.; Mendat, Deborah P.; Smith, Dexter G.

The state of the art of active-passive noise control
pp. 421-428(8)
Author: Bernhard, Robert J.

Control of sound radiation/reflection with adaptive foams
pp. 429-436(8)
Authors: Fuller, C.R.; Bronzel, M.J.; Gentry, C.A.; Whittington, D.E.

Adpative tuned vibration absorbers: Tuning laws, tracking agility, sizing, and physical implementations
pp. 437-454(18)
Authors: von Flotow, Andreas H.; Beard, Andrew; Bailey, Don

Adaptive-passive control of structural vibrations via piezoelectric materials with real-time adaptive circuits
pp. 455-460(6)
Authors: Wang, K.W.; Yu, W.K.; Lai, J.S.

Adaptive-passive vibration control of single frequency excitations applied to noise control
pp. 461-466(6)
Authors: Ryan, Matthew W.; Franchek, Matthew A.; Bernhard, Robert

Broadband wide-area active control of sound radiated from vibrating structures using local surface-mounted radiation suppression devices
pp. 467-472(6)
Authors: Mason, V.B.; Naghshineh, K.; Toth, G.K.

Adaptive feedback active noise control
pp. 473-478(6)
Authors: Kuo, Sen M.; Vijayan, Dipa

Adaptive active vibration control of flexible beam structures
pp. 479-484(6)
Authors: Tokhi, M.O.; Hossain, M.A.

Random vibration of nonlinear beams by the new stochastic linearization techniques
pp. 487-492(6)
Author: Fang, J.

Comments on the use of structureborne noise analysis for large commercial airplanes
pp. 493-494(2)
Authors: Marshall, Steven E.; Butzel, Leo M.

Analytical, numerical, and experimental comparisons of structure-borne noise in a rectangular acoustic enclosure
pp. 495-500(6)
Authors: Franchek, Nanch M.; Bernhard, Robert J.

Minimization of radiated sound power using external system modeling
pp. 501-506(6)
Authors: Gardner, B.K.; Bolton, J.S.

Vibrational waves propagation along piping system network
pp. 507-512(6)
Authors: Biben, C.; Simon, F.; Pauzin, S.; Biron, D.

Exact dynamic responses of periodic multi-span beams under converted pressure fields
pp. 513-518(6)
Author: Zhu, L.P.

Application of mathematical theory of interval analysis to uncertain vibrations
pp. 519-524(6)
Authors: Elishakoff, Isaac; Duan, Dehe

A systems approach to the transmission of sound and vibration through structures
pp. 525-540(16)
Author: Crocker, Malcolm J.

Evaluations of structure-borne noise prediction techniques
pp. 541-544(4)
Authors: Burroughs, Courtney; Carroll, Gerard P.; Cuschieri, Joseph M.

Vibro-acoustics of ribbed structures - A compact modal formulation for S.E.A. models
pp. 545-550(6)
Author: Bremner, P.G.

The application of the Wigner distribution to wave type identification in finite length beams
pp. 551-556(6)
Authors: Wahl, T.J.; Bolton, J.S.

Structural power flow analysis using finite element
pp. 557-562(6)
Authors: Buchmann, Patrick; Cuschieri, Joseph M.; Yong, Yan

Mobility power flow (MPF) approach applied to a fluid-loaded shell with a plate bulkhead
pp. 563-568(6)
Authors: McCain, Thomas Scott; Cushieri, Joseph M.

"Round Robin" comparison of structural motion spectral measurements
pp. 569-572(4)
Author: Remmers, Gene M.

Boundary element calculation of transient 3-D wave propagation in viscoelastic solids
pp. 573-578(6)
Authors: Gaul, L.; Schanz, M.

Analysis of transmitted vibration in a T-beam structure using component modes
pp. 579-584(6)
Authors: Farstad, Jerry E.; Singh, Rajendra

A T-frame for analysis of structure-borne sound transmission by multi-point and component excitation
pp. 585-590(6)
Author: Petersson, Bjorn A.T.

Structure-borne noise predictions for a simple T-shaped beam
pp. 591-596(6)
Authors: Hambric, Stephen A.; Quezon, Antonio J.

Analysis of structure-borne noise power flow through bearings in a gearbox
pp. 597-602(6)
Authors: Rook, Todd E.; Singh, Rajendra

Localization and transmission loss in ribbed plates
pp. 603-608(6)
Author: DeJong, Richard G.

Assessment of structural intensity and energy flow in multi-source environments by means of singular value analysis
pp. 609-614(6)
Authors: Otte, Dirk; Pascal, Jean-Claude; Made, Christophe; Carniel, Xavier

A theoretical analysis of airborne sound transfer for a resiliently mounted machine to its foundation
pp. 615-620(6)
Authors: Shaw, Michael F.; Burroughs, Courtney B.

Free vibration of stochastic structures on uncertain elastic foundation
pp. 621-626(6)
Author: Ren, Y.J.

Effect of constraining layer stiffness on performance of damping tile materials using finite element modelling with Rayleigh integral
pp. 627-634(8)
Authors: Orzechowski, Jeffrey M.; Landmann, Alan E.

Sound insulation projects: Serving three clients
pp. 635-640(6)
Author: Harris, Andrew S.

25 years of airport sound insulation programs
pp. 641-648(8)
Author: Sharp, Ben H.

Acoustical treatment of ventilation paths for sound insulation of buildings
pp. 649-654(6)
Authors: Rosenberg, Carl J.; Savereid, Christopher

Acoustic performance of an air conditioning system with a diffusion ceiling
pp. 655-660(6)
Authors: Funfschilling, Odile; Lenat, Yves

Vibration isolation for noise control in residential HVAC systems - A case study
pp. 661-666(6)
Author: Comparin, Robert J.

Noise control in research laboratories
pp. 667-672(6)
Authors: Yazdanniyaz, Amir M.; Bussell, Richard

Residential sound insulation - A quest for quiet
pp. 673-678(6)
Author: Murphy, Deborah W.

Noise control along interstate 95 in Broward and Palm Beach counties
pp. 679-686(8)
Author: Campbell, Ken

The effect of vehicle speed on sound frequency spectra
pp. 687-692(6)
Authors: Ogle, Timothy W.A; Wayson, Roger L.

Noise barrier construction in a high water table environment: An alternative method
pp. 693-696(4)
Author: Lindeman, Win

Application of a large-scale SEA model to a ship noise problem
pp. 697-702(6)
Authors: Burkewitz, Bart; Cohen, Leonard; Baran, Fran

The active control of airborne noise in a high speed patrol craft
pp. 703-708(6)
Authors: Dignan, M.; Schudel, G.; Hanna, D.; Sutterlin, M.

Noise control on a large tractor tug
pp. 709-714(6)
Author: Fischer, Raymond W.

Valve noise on an offshore platform
pp. 715-720(6)
Authors: Moritz, Charles T.; Bommer, Arno S.

Noise evaluation in geothermal installations
pp. 721-726(6)
Author: Licitra, Gaetano

Prominence ratio method for discrete tones in noise: Computation of adjacent critical bands
pp. 729-734(6)
Author: Nobile, Matthew A.

An experimental study on the sound evaluation based on the compound effect of environmental factors in a room
pp. 735-738(4)
Authors: Iwashige, Hirofumi; Ohta, Mitsuo

Subjective and objective evaluation of equal and unequal exhuast systems for V-6 and V-8 engine applications
pp. 739-744(6)
Authors: Siavoshani, John; Ruhala, Richard

Using artificial neurel networks to model human annoyance to noise
pp. 745-750(6)
Authors: Laux, Peter C.; Davies, Patricia

Possibilities of psychoacoustics to determine sound quality
pp. 751-756(6)
Author: Genuit, Klaus

Environmental noise criteria for pure tone industrial noise sources
pp. 757-762(6)
Author: Lilly, Jerry G.

Assessing effects of military aircraft noise on residential property values near airbases
pp. 763-766(4)
Authors: Fidell, Sanford; Tabechnick, Barbara; Silvati, Laura; Cook, Brenda

Integrating noisemap with the geographic resource analysis support system (GRASS) to enhance environmental impact assessments and land use compatibility studies
pp. 767-770(4)
Author: Shepardson, Kenneth

A review and revision of acceptable room noise levels
pp. 771-778(8)
Author: Kingsbury, Howard F.

Low frequency noise assessment - What do we know?
pp. 779-784(6)
Author: Broner, Norman

Low-noise windscreen design and performance
pp. 787-792(6)
Authors: Menge, Christopher W.; Sanchez, Gonzalo

Torsional operational deflection shapes (TODS) measurements
pp. 793-798(6)
Authors: Gade, Svend; Gatzwiller, Kevin; Herlufsen, Henrik

The calibration of a scanning laser vibrometer by a digital FM demodulation technique
pp. 799-804(6)
Authors: Zeng, Xiandi; Dominguez, Jose L.; Wicks, Alferd L.

Objective acoustical analysis of room acoustic measurements in Portuguese catholic churches
pp. 805-810(6)
Author: Carvalho, Antonio Pedro O.

Estimation theory and experiment using digital filter for reverberation curve with unknown initial state in room contaminated by background noise
pp. 811-816(6)
Authors: Ohta, Mitsuo; Ogawa, Hitoshi; Hatakeyama, Kazutatsu

Corner mounted boundary microphones for measuring decay rate in a reverberation room
pp. 817-820(4)
Author: Kolano, Richard A.

Material properties characterization for composites using ultrasonic methods
pp. 821-830(10)
Author: Hsu, David K.

Material property characterization of pultruded glass/expoxy composites using ultrasonic and vibration measurements
pp. 831-836(6)
Authors: Vangipuram, Radesh; Mantena, P. Raju; Hickling, Robert

Acoustic impact technique - An overview
pp. 837-844(8)
Authors: Raju, P.K.; Vaidya, U.K.

Techniques for interaural cross correlation measurements
pp. 845-850(6)
Author: Madaras, Gary S.

IIC rating of tapping machine field measurements
pp. 851-856(6)
Author: Hirtle, Parker W.

Computer optimized design of a reverberation room
pp. 857-862(6)
Authors: Ebbitt, Gordon; Dinsmore, Mike; Rauf, Najam

Time series modelling techniques for multivariate correlation analysis of operating response data
pp. 863-868(6)
Authors: Otte, Dirk; Yang, Qianjin; Sas, Paul

Higher-order statistical signal processing based on wide sense digital filters and its application to state estimation of various type acoustic environments
pp. 869-874(6)
Authors: Hiromitsu, Seijiro; Ohta, Mitsuo

Shaped PVDF sensors for intelligent measurement of acoustic pressure in liquid-filled pipes
pp. 875-884(10)
Author: Royston, Thomas J.

Vibro-acoustic analysis of manned spacecraft using SEA
pp. 887-892(6)
Authors: Rodrigo, G. Alonso; Klein, M.; Borello, G.

Probability distribution of mean-squared sound pressure and structural velocity by statistical energy analysis
pp. 893-898(6)
Authors: Huang, X.L.; Radcliffe, C.J.

Finite element modeling of isotropic elastic porous materials coupled with acoustical finite elements
pp. 899-904(6)
Authors: Kang, Y.J.; Bolton, J.S.

A refined transient boundary element model for acoustic modeling
pp. 905-910(6)
Author: Coyette, J.P.

Generalization of the Bolotin's dynamic edge effect method for vibration analysis of Mindlin plates
pp. 911-916(6)
Author: Elishakoff, Isaac

Prediction of natural frequency variability due to uncertainty in materials
pp. 917-922(6)
Author: Li, Y.W.

Array processing requirements for the measurement of structure and fluid borne propagation of flow noise in pipes
pp. 923-928(6)
Authors: Corrado Jr, Charles N.; Clifton, Mark A.

A comparison of multi-reference nearfield acoustical holography procedures
pp. 929-934(6)
Authors: Hallman, Darren L.; Bolton, J. Stuart

Acoustical holography in spherical coordinates for noise sources identification
pp. 935-940(6)
Authors: DeVries, L.A.; Bolton, J.S.; Lee, J.C.

An Istanbul-Ataturk airport measurement and analysis of noise in due of take-off time
pp. 941-946(6)
Author: Demirkale, Sevtap Yilmaz

Determining the effects of alternative departure cutback altitudes and power settings a case study, John Wayne airport
pp. 947-952(6)
Author: Mestre, Vincent

INM contour validation - A case study
pp. 953-958(6)
Author: Brown, Robert E.

Noise modeling for MOAs and ranges
pp. 959-964(6)
Authors: Lucas, Michael J.; Lee, Robert A.

MOAMAP: A model that combines several different kinds of aircraft operations
pp. 965-968(4)
Authors: Arrieta, Rodolfo T.; McGlothlin, Larry

The present and future of aircraft noise models: A user's perspective
pp. 969-974(6)
Author: Larson, Kate M.S.

Subjective evaluation of spatial impression: The importance of lateralization
pp. 975-980(6)
Author: Gold, Martin A.

Effects of various architectural parameters on acoustical measures in halls of listening
pp. 981-986(6)
Author: Chiang, Wei-hwa

Guidelines for conducting listening tests on sound quality
pp. 987-992(6)
Author: Letowski, Tomasz R.

Noise criteria for ships and offshore platforms
pp. 995-1000(6)
Authors: Bruce, Robert D.; McKinney, Eric V.

Effects of new European noise standards on manufacturers - An introduction
pp. 1001-1006(6)
Author: Lang, William W.

Guidance for the drafting of the noise clauses of safety standards
pp. 1007-1012(6)
Authors: Nielsen, Leif; Skovgaard, Knud

Enforcement of European directive noise requirements by international standards
pp. 1013-1016(4)
Author: Hubner, Gerhard

Impact of anticipated changes in mine noise regulations on the coal mining industry
pp. 1017-1022(6)
Authors: Bartholomae, Roy C.; Burks, J. Alton

European community directives relating to noise
pp. 1023-1028(6)
Author: Higginson, Roger F.

Noise reduction as a requirement in machine specific safety standards
pp. 1029-1032(4)
Authors: Lazarus, H.; Sehrndt, G.A.

Are there easy ways to comply with the European directive on machinery safety?
pp. 1033-1036(4)
Author: Jonasson, Hans G.

Permitting requirements for 24-hour tunneling construction
pp. 1037-1042(6)
Author: Wolf, Steven