INTER-NOISE and NOISE-CON Congress and Conference Proceedings

People versus noise
pp. 3-12(10)
Author: Rathe, Eric J.

Statistical energy analysis: A wolf in sheep's clothing?
pp. 13-26(14)
Author: Fahy, F.J.

Induced hearing loss in industry
pp. 27-40(14)
Author: Bruel, Per V.

Progress report of I-INCE working party on upper noise limits in the workplace
pp. 43-44(2)
Author: Embleton, Tony F.W.

Noise emission of road vehicles - Effect of regulations. Status report of an I-INCE working party
pp. 45-50(6)
Author: Sandberg, Ulf

Noise research as a problem of public health
pp. 51-58(8)
Author: Vallet, Michel

Selected flight test data and control system results of the CEC Brite/Euran ASANCA study
pp. 59-64(6)
Authors: Borhers, I.U.; Renger, K.; Paillard, J.; Billoud, G.; Koers, P.; Doppenberg, E.

Optimisation of secondary sources for active noise control in a FE-model of an aircraft cabin
pp. 65-70(6)
Author: Alvelid, Magnus

Experimental analysis of primary and secondary sound and vibration fields in aircraft cabins
pp. 71-76(6)
Authors: Van der Auweraer, H.; Otte, D.; Venet, G.; Catalifaud, J.

Advanced actuators for active noise control in propeller aircraft
pp. 77-82(6)
Authors: Larsen, Peter Nohr; Venet, Gerard

A genertic algorithm for optimal positioning in active noise control: Results for the ASANCA project
pp. 83-88(6)
Authors: Tsahalis, D.T.; Katsikas, S.K.; Manolas, D.A.

Some tracking capabilities of TNO's aircraft ANC-system
pp. 89-94(6)
Authors: Koers, Peter; Doppenberg, Ed

Design, simulation and validation of a control algorithm for active control of aircraft interior noise
pp. 95-100(6)
Authors: Billoud, Guy; Lefebvre, Sylvie; Galland, Marie-Annick; Roure, Alain

Active control of sound transmission through double panel partition: Experimental results
pp. 101-106(6)
Authors: Sas, P.; Bao, C.

DPA: The active controlled double wall
pp. 107-112(6)
Authors: Gagliardini, Laurent; Bouvet, Pascal

The making of an airport noise management standard
pp. 113-118(6)
Author: Dickinson, Philip J.

Activity and sleep interference; A new measurement technique
pp. 119-124(6)
Author: Schomer, Paul D.

Fundamental inadequacies of standard noise measurements around airports to assess the annoyance to the communities
pp. 125-130(6)
Author: Looten, A.

Investigation of a ranking systems for aircraft based on the resulting sound-pressure levels inside bedrooms
pp. 131-136(6)
Authors: Puts, Bernardus H.C.M.; van der Werf, Jeroen

Modelling of aircraft noise exposure. Is use as a planning tool limited by accuracy?
pp. 137-142(6)
Author: Bekebrede, Gerard

The existing methodologies for the calculation of aircraft noise load in the EEC member states
pp. 143-148(6)
Author: Jonkhart, S.

Improvement of the method to represent the horizontal distribution of flight tracks in aircraft noise load calculations
pp. 149-154(6)
Author: ten Have, H.B.G.

Recent developments with respect to aircraft noise and sleep disturbance
pp. 155-160(6)
Authors: van der Ploeg, F.D.; Schuller, W.M.

Noise prediction at new Athens airport "Eleftherios Venezelos" by application of the integrated noise model, based on meteorological effects
pp. 161-164(4)
Author: Tsouka, Despina G.

Variation of noise level from aircraft
pp. 165-170(6)
Author: Bruel, Per V.

A 3D boundary element method for determination of acoustic eigenfrequencies considering admittance boundary conditions
pp. 171-176(6)
Authors: Chen, Z.S.; Hofstetter, G.; Mang, H.A.

On the accuracy of numerical methods in acoustics: Comparison of measurements and calculations
pp. 177-182(6)
Author: von Estorff, Otto

A general procedure for coupling acoustic finite elements and boundary elements
pp. 183-188(6)
Authors: Coyette, J.P.; Vanderborck, G.; Steichen, W.

A global acoustic sensitivity procedure for structural optimization
pp. 189-192(4)
Authors: Guisset, P.; Coyette, J.P.

A refined model for composite treated panels as used in automotive industry
pp. 193-196(4)
Authors: Coyette, J.P.; Bloemhof, H.

Structural-acoustic interaction in an air intake system of a truck
pp. 197-202(6)
Authors: Reinink, H.F.; Schoofs, A.J.G.; Jongerius, N.A.

The boundary element techique as a tool for the design of a noise protection hangar for jet engine testing on giant aircraft
pp. 203-208(6)
Authors: Tournoy, D.; Poncelet, P.

A coupled FEM/BEM model for designing axisymmetrical acoustic transducers
pp. 209-214(6)
Authors: Vanderborck, G.; Breschi, N.; Steichen, W.; Coates, R.

Application of air borne noise calculation to optimize engines - Basic investigations
pp. 215-220(6)
Authors: Rainer, Gotthard Ph.; Gschwelti, Ernest; Herster, Paul

Wave envelope element formulations for exterior acoustic problems: Status and projections
pp. 221-224(4)
Authors: Astley, R.J.; Macaulay, G.J.; Coyette, J.P.

Numerical evaluation of acoustic interactions between transducers
pp. 225-230(6)
Authors: Steichen, W.; Vanderborck, G.; Coyette, J.P.

Simulation of the acoustic behaviour of an expansion chamber through uni- and three-dimensional models (FE, BEM)
pp. 231-238(8)
Authors: Mantovani, Maurizio; Schellino, Giancarlo; Angori, Silvio P.

A national plan of action against noise, Part I and Part II
pp. 239-244(6)
Author: Kihlman, Tor

Noise abatement policy in Germany and in the EC
pp. 245-248(4)
Author: Daldrup, Ursula

Acoustic research in the frame of the commission of the European communities
pp. 249-254(6)
Author: Kruppa, P.

Will the EEC Directives give us work places with less noise and vibration?
pp. 255-260(6)
Author: Spang, Kjell

Mechanical impedance and natural vibrations of some ship structures
pp. 261-266(6)
Author: Nikiforov, A.

Noise prediction method for ship passenger accommodations
pp. 267-272(6)
Authors: Chatel, G.; Blanchet, A.

Dynamic characteristics of cross-stiffened, parallel plates
pp. 273-276(4)
Authors: Nijman, E.J.M.; Petersson, B.A.T.

Physical modeling of marine propeller cavitation noise using a rotating rod as cavitation generation
pp. 277-282(6)
Author: Latorre, Robert

Sound radiated by a ship's hull plate
pp. 283-286(4)
Authors: Bruggerman, J.C.; de Jong, C.A.F.

Noise level inside ship accommodation depend on acoustic power radiated by a cabin windows
pp. 287-292(6)
Author: Weyna, Stefan

Underwater and inboard sound path analysis of a resiliently mounted engine
pp. 293-296(4)
Authors: de Regt, M.J.A.M.; Nijman, E.J.M.

Modelling of boundary conditions when treating a ship hull as an acoustical wave guide
pp. 297-300(4)
Author: Orrenius, Ulf

Control of environmental noise in submarines
pp. 301-304(4)
Author: Clampton, S.J.

A study on loading noise of non-cavitating marine propeller
pp. 305-308(4)
Authors: Zhu, Xiqing; Wu, Wusheng; Baojun; Xu, Shangren; Shi, Xiaojun

Estimation of low frequency noise radiated from submerged exhaust exit
pp. 309-312(4)
Authors: Zhang, Wenping; Ma, Qiang; Zhang, Zhihua

Effectiveness of the hull surface compliance to reduce the propeller-induced ship vibration
pp. 313-318(6)
Author: Maizel, Alexander B.

Progress in the development of international standards for determining sound power levels and emission sound pressure levels of noise sources
pp. 319-322(4)
Author: Lang, William W.

Round robin test determining the sound power by sound pressure measurements according to ISO 3744 - First results
pp. 323-328(6)
Authors: Hubner, Gerhard; Wu, Jiang

An investigation of measurement uncertainties in the determination of machinery sound power levels
pp. 329-334(6)
Authors: Payne, R.C.; Hanes, P.

Different results of sound power measurements as a consequence of standardization?
pp. 335-340(6)
Authors: Finke, Hans-O.; Bethke, Christian

More accurate noise measurements of machinery in factory halls by removable absorbing screens?
pp. 341-344(4)
Authors: Schupp, G.; Nasshan, K.

The development of IEC sound intensity instrument standard
pp. 345-350(6)
Author: Kuehn, John

Investigation of the limits of the sound intensity scanning method determining sound powers
pp. 351-356(6)
Authors: Hubner, Gerhard; Gao-Sollinger, Yumei

The accuracy of scanning sound intensity method in sound power level determination
pp. 357-362(6)
Authors: Tachibana, Hideki; Yano, Hiroo; Yamaguchi, Kiminori

Measurement of sound pressure levels with intensity technique
pp. 363-366(4)
Author: Jonasson, Hans G.

Accuracy of emission sound pressure levels
pp. 367-372(6)
Author: Sehrndt, Gustav A.

Measurement of the noise emission of machines with a reference sound source
pp. 373-376(4)
Author: Probst, Wolfgang

Sound power measurements using sound intensity and sound pressure methods
pp. 377-384(8)
Authors: Crocker, Malcolm J.; Yang, Shaobo

Sound intensity standards for determining sound power of computer and business equipment: ECMA-160 and ISO/DIS 9614-2
pp. 385-390(6)
Authors: Hellweg Jo., Robert; Baines, Donald; Wohrle, Kurt; Hsieh, Hsiao-an

Noise emission standardization measurement of woodworking machines and determination of their uncertainties
pp. 391-396(6)
Author: Niemeyer, Wilm-Henner

DIN 45649 - A standard for measuring the noise emissions of municipal vehicles - Experience in using and comparison to other standards
pp. 397-400(4)
Author: Becker, Stefan

System for assembling and evaluating characteristic machinery noise emission data
pp. 401-406(6)
Authors: von Heesen, Wilhelm; Horing, Bernd

Noise emission measurement of foundry machines and standardisation of a measurement procedure
pp. 407-410(4)
Author: Van den Brulle, Paul

Noise emission of machine tools
pp. 411-416(6)
Authors: Week, Manfred; Imdahl, Michael

Ranking the sound power of a dance hall by means of sound intensity measurements
pp. 417-422(6)
Authors: Pleeck, D.; Schyvens, T.

Sound power determination by intensity measurement on a rotating source in a reverberation room
pp. 423-426(4)
Author: Verhas, H.P.

Study on the reference sound source
pp. 427-430(4)
Author: Suzuki, Shoji

Development of a vibroacoustic diagnostic software to predict sound pressure radiated by industrial machineries, From measurements of vibration level on its body. Part 1: Experimentation of the method on an academic case
pp. 431-434(4)
Authors: Lovat, G.; Thome, J.P.; Loyau, T.

Development of a vibroacoustic diagnostic software to predict sound pressure radiated by industrial machineries, From measurements of vibration level on its body. Part 2: Experimentation on the actual industrial machine
pp. 435-438(4)
Authors: Thome, J.P.; Loyau, T.; Millard, C.

Immission relevant sound power level of moving source
pp. 439-444(6)
Authors: Jaroch, Andrzej; Rabiega, Maria

Prediction of sound transmission in dwellings: A European approach
pp. 445-450(6)
Author: Gerretsen, Eddy

Sound transmission through cavity walls
pp. 451-456(6)
Authors: Craik, Robert J.M.; Wilson, Robin

Structure-borne sound transmission between elastically coupled plates
pp. 457-462(6)
Authors: Mees, P.; Vermeir, G.

S.E.A. as a predictive tool to improve sound insulation between dwellings
pp. 463-466(4)
Authors: Jean, Philippe; Villot, Michel

The finite element method as a tool for the description of sound fields at low frequencies
pp. 467-470(4)
Authors: Pietrzyk, Andrzej; Kropp, Wolfgang; Kihlman, Tor

Combining up to date vibration analysis techniques and composite isolation material technology: A highly effective approach for optimization of floating floors in sound sensitive areas
pp. 471-474(4)
Authors: Medwedyk, Terry; Carels, Patick M.

Vibration in buildings
pp. 475-478(4)
Author: Vercammen, M.L.S.

Prognosis of noise and vibration levels in living quarters of offshore platforms, based on measurements
pp. 479-482(4)
Author: Huizer, Hans

AEL methodology for the prediction of the re-radiated noise in residential buildings from trains travelling in tunnels
pp. 483-488(6)
Author: Greer, R.J.

Studies on the propagation of sound in an inhomogeneous moving medium
pp. 489-494(6)
Author: Li, K.M.

Attenuation of sound over long range ground-to-ground propagation paths
pp. 495-500(6)
Authors: Chinoy, C.B.; Lambert, R.F.

An independent review of current outdoor noise propagation calculation methods
pp. 501-506(6)
Authors: Lam, Y.W.; Windle, R.M.

On the feasibility of railway noise reduction by using local porous surfaces
pp. 507-512(6)
Author: Attenborough, Keith

Outdoor sound propagation over porous road pavements
pp. 513-518(6)
Author: Berengier, Michel C.

Improvement of the spatial Hankel transform method to determine the impedance of outdoor ground surfaces
pp. 519-526(8)
Authors: Verhaegen, C.; Lauriks, W.; Cops, A.

The European approach to technical harmonization and its effect on standardization in acoustics
pp. 527-532(6)
Author: Brinkmann, Klaus

Results of joint work of ISO/TC43/SC2 "Building Acoustics" and of CEN/TC126 "Acoustic Properties of Building Products and of Buildings"
pp. 533-536(4)
Author: Goydke, Hans

Working through ISO on the preparation of European standards on noise - Collaboration between ISO/TC 43/SC1 "Noise" and CEN/TC 211 "Acoustics"
pp. 537-542(6)
Author: Nielsen, Leif

Co-operation IEC/TC 29 electronics - CENELCE and ISO/TC 43 acoustics - ISO/TC 94/SC 12 hearing protectors - CEN/TC 159 hearing protectors
pp. 543-548(6)
Author: Johansson, P. Bertil

Teh Dutch noise abatement law calls for a coupling of individual sound regulations with the zones
pp. 549-552(4)
Authors: Wijnants, Frank J.M.W.; Puts, Bernardus H.C.M.

Reducing annoyance caused by industrial noise the Dutch governmental policy
pp. 553-554(2)
Author: Welkers, T.C.

A systematic approach to improve the sound quality of an automotive air-conditioning compressor
pp. 555-558(4)
Author: Thawani, Prakash T.

Drawbacks of the 85/337 EEC directive application: Modification proposal
pp. 559-562(4)
Authors: Lombardi, Guido; Campolongo, Giorgio; Novo, Mario; Scalzaretto, Velio