INTER-NOISE and NOISE-CON Congress and Conference Proceedings
ISSN 0736-2935 (Print)


The Noise-Con conference proceedings are sponsored by INCE/USA and the Inter-Noise proceedings by I-INCE. NOVEM (Noise and Vibration Emerging Methods) conference proceedings are included. All proceedings older than 5 years are free to download. Others are free to INCE/USA members and member societies of I-INCE.
Publisher: Institute of Noise Control Engineering
- Membership Information
- INCE Subject Classification
- Ingenta Connect is not responsible for the content or availability of external websites
Articles
Evaluation of the applicable standards for the declaration of noise emission values of refrigeration type compressors
pp. 563-568(6)
Authors:
Serafettinoglu, A. Hakan; Durakbasa, O. Tugrul
Experience with traffic noise restraint measures in Germany
pp. 569-574(6)
Author:
Steven, Heinrich
Traffic nosie monitoring and evaluation in large and medium ruban areas in Greece
pp. 575-580(6)
Authors:
Vogiatzis, Constantinos; Psichas, Kyriskos
Noise and traffic management in Italian towns
pp. 581-586(6)
Author:
Brambilla, G.
Traffic noise pollution in touristic centres of appreciable scenery
pp. 587-592(6)
Authors:
Elia, G.; d'Argentina, M. Beria; Renzullo, A.
Noise separation in a multisource environment (road, rail and air traffic), The Villeneuve St Georges survey
pp. 593-598(6)
Authors:
Clairbois, Jean-Pierre; Tisseyre, Alain
Strategies for the mitigation of traffic noise in urban areas
pp. 599-604(6)
Author:
Delanne, Yves R.D.
The noise assessment of road surface influences on the traffic noise by pass-by level statistics of cars and trucks
pp. 605-610(6)
Author:
Ullrich, Siegfried
Sound power levels of road vehicles: Determination of peak or single event levels
pp. 611-616(6)
Author:
Lucquiaud, Roland
Pricing of traffic noise in road planning
pp. 617-620(4)
Authors:
Karhula, Mervi; Honkasalo, Antero
Highway noise in a critical built-up area: Noise measurements, improvement simulations using an "In situ" tuned prediction model (Part 1)
pp. 621-624(4)
Authors:
Pleeck, D.; Van Overmeire, M.; De Borger, G.
Practical tests of the Nordic prediction model for road traffic noise - Predicted values compared to measured values
pp. 625-628(4)
Author:
Olafen, Sigmund
Prediction of road traffic noise taking account of transient running conditions of vehicles
pp. 629-634(6)
Authors:
Oshino, Yasuo; Tachibana, Hideki
Action plan against exterior tyre/road noise
pp. 635-640(6)
Author:
Sandberg, Ulf
Acoustical characteristics of porous pavements - A new phenomenological model
pp. 641-646(6)
Authors:
Hemet, Jean-Francois; Berengier, Michel
The effect of road surface properties on rolling noise levels of different tyres
pp. 647-652(6)
Author:
van Blokland, G.J.
A test procedure for the measurement of lorry type noise
pp. 653-658(6)
Authors:
Nelson, P.M.; Phillips, S.M.
Drum measurements of tyre noise as a function of roadway temperature and circumferential forces
pp. 659-664(6)
Author:
Ullrich, Siegfried
Noise-reducing road surface. Recent experience in Denmark
pp. 665-670(6)
Author:
Kragh, Jorgen
Suspension analysis in view of road noise optimization
pp. 679-684(6)
Authors:
Hendricx, W.; Vandenbroeck, D.
External vehicle noise: Analysis and control using the STSF technique
pp. 685-690(6)
Authors:
Ginn, K.G.; Hald, J.
Measurement of mechanical-acoustic transfer functions of road vehicles via reciprocity
pp. 691-696(6)
Authors:
van der Linden, P.J.G.; Fun, J.K.
Technology trends for vibro-acoustic CAE used in car development
pp. 697-702(6)
Authors:
Vandeurzen, Urbain; Bakkers, Willy; Leuridan, Jan
Advanced techniques for vibration analysis of car structures
pp. 703-708(6)
Authors:
Barla, A.; Toniato, G.; Chiesa, L.
An overview of boundary element approaches for acoustic modelling
pp. 709-714(6)
Authors:
Coyette, J.P.; Migeot, J.L.
New developments in vehicle pass-by noise measurement and diagnosis techniques
pp. 715-720(6)
Authors:
van der Linden, P.J.G.; Otte, D.; Van de Ponseele, P.
Evaluation and validation of numerical calculation methods for prediction of insertion loss of close-fitting engine enclosures
pp. 721-726(6)
Authors:
Augusztinovicz, F.; Sas, P.
High resolution order tracking at extreme slew rates, using Kalman tracking filters
pp. 727-732(6)
Authors:
Vold, Havard; Leuridan, Han
Vehicle nosie - External noise drive-by measurements with documentation, made easy
pp. 733-738(6)
Authors:
Koldso, S.E.; Carlsen, B.S.
Fast algorithms for multichannel feedforward active control
pp. 739-742(4)
Authors:
Boucher, C.C.; Elliott, S.J.; Nelson, P.A.
A parametric approach for optimization of enclosed sound field simulations
pp. 743-746(4)
Authors:
Hoogenboom, H.J.; van der Toorn, J.D.; de Vries, D.
A multichannel optimal block adaptive algorithm for active noise attenuation
pp. 747-750(4)
Author:
Shen, Qun
An optimal controller for noise reduction
pp. 751-754(4)
Authors:
Subbarao, A.; Perdikaris, G.
A new digital filter system specialized for active control of noise - Paralleled digital filter
pp. 755-758(4)
Authors:
Usagawa, Tsuyoshi; Furukawa, Hideo; Ebata, Masanao
A method to increase the convergence speed by using uncorrelators in the active control of multiple noise sources
pp. 759-762(4)
Authors:
Abe, Masato; Chen, Guo-yue; Sone, Toshio
An effect of the transfer function from the secondary sources to the error sensors on the performance of the active control system
pp. 763-766(4)
Authors:
Chen, Guo-yue; Abe, Masato; Sone, Toshio
Delayed-X algorithm for a long duct system
pp. 767-772(6)
Authors:
Park, Youngjin; Kim, Hyounsuk
Study on active noise attenuation in three-dimensional sound field
pp. 773-776(4)
Authors:
Hasebe, Masaki; Kaida, Masakazu
A general active noise attenuation system for three dimensional propagation medium
pp. 777-780(4)
Authors:
Man, K.F.; Yung, W.K.
Active noise attenuation inside the automobile cabin
pp. 781-784(4)
Author:
Shen, Qun
Active minimization of acoustic potential energy in acoustoelastically coupled systems: An analytical approach
pp. 785-788(4)
Authors:
Gonenc-Sorguc, Arzu; Caliskan, Mehmet
Active control of unsteady room noise
pp. 789-792(4)
Author:
Maa, Dah-You
Optimization of active noise control systems in enclosures
pp. 793-798(6)
Authors:
Yang, T.C.; Tseng, C.H.; Ling, S.F.
Active control of the sound power radiated by an engine enclosure
pp. 799-802(4)
Authors:
Chatel, G.; Roure, A.; Silhouette, L.
Active control of turbulent boundary layer induced sound radiation
pp. 803-806(4)
Authors:
Thomas, D.R.; Nelson, P.A.
Active control of noise generated by fans in ducts
pp. 807-810(4)
Author:
Duthoit, F.
Active noise control of a large industrial fan
pp. 811-814(4)
Authors:
Warnaka, Glenn E.; Robey, Robert V.; Warnaka, Mark E.; Fleury, Brian G.; Poole, Lynn A.; Beltran, Carlos
Active control of radiation from plates by use of modal sensors
pp. 815-820(6)
Authors:
Larsen, Claus; Larsen, Peter Nohr
Performance of active noise control in large air ducts
pp. 821-824(4)
Authors:
Goodman, Seth D.; Burlage, Kirk G.; Pedersen, Douglas G.
Noise control on air ducts: Evoluation of active systems and perspectives
pp. 825-828(4)
Authors:
Cotana, F.; Rossi, F.; Santarpia, L.
Frequency domain adaptive control algorithm for electronic muffler applications
pp. 829-832(4)
Authors:
Ziegler Jr., E.W.; Eghtesadi, Kh.
An experimental apparatus to evaluate the performances of active noise control systems on glass plates
pp. 833-836(4)
Authors:
Felli, M.; Cotana, F.; Buratti, C.
Active/passive noise control for ship system ducts
pp. 837-842(6)
Author:
Maslov, Viatcheslav L.
Feedback control of flexural waves on a beam
pp. 843-846(4)
Authors:
Elliott, S.J.; Brennan, M.J.; Pinnington, R.J.
Power absorption and minimization on Euler-Bernoulli beams
pp. 847-850(4)
Authors:
Brennan, M.J.; Elliott, S.J.; Pinnington, R.J.
Active control of power input in a plate: Feedforward and feedback methods
pp. 851-854(4)
Authors:
Pascal, J-C.; Carniel, X.; Nezan, S.
Piezoceramic transducers vibration active control capability
pp. 855-858(4)
Authors:
Miccoli, G.; Lecce, L.
Preparation and properties of magnetic vibration-damper
pp. 859-862(4)
Author:
Hansaka, Masanori
Optimal controller design for a system with flexible modes
pp. 863-866(4)
Author:
Subbarao, A.
Aircraft structural elements vibration active control numerical simulation
pp. 867-870(4)
Authors:
Concilio, A.; Del Gatto, F.S.; Vitiello, P.
Active vibration control in pipes
pp. 871-874(4)
Authors:
Harper, M.; Leung, R.
Control channel synthesis for linear and nonlinear active vibration isolation systems using fixed point method
pp. 875-880(6)
Author:
Kravchenko, Sergey V.
Indirect measurement of multiple random force spectra
pp. 881-884(4)
Authors:
Roggenkamp, Timothy J.; Bernhard, Robert J.
Experimental vibro-acoustic system modelling in the medium frequency area: An impedance modelling approach
pp. 885-888(4)
Authors:
Otte, Dirk; Van der Auweraer, Herman
The time windows for estimating transfer function by the croos spectral method
pp. 889-892(4)
Authors:
Kido, Ken'iti; Fukushima, Manabu; Suzuki, Hideo; Ono, Takahiko
Investigation of window shapes for estimating discrete frequency components by FFT
pp. 893-896(4)
Authors:
Ono, Takahiko; Kido, Ken'iti
The application of phase-magnitude demodulation of vibroacoustical signal in the diagnostics of local failures
pp. 897-900(4)
Author:
Radkowski, Stanislaw
The relationship signal-mathematical model as the basis of processing
pp. 901-906(6)
Author:
Dabrowski, Zbigniew
Adaption of the booming nature of sound
pp. 907-910(4)
Authors:
Hashimoto, Takeo; Hatano, Shigeko
Subjective evaluation of the quality of ventilation system noise in motor cars
pp. 911-914(4)
Author:
Parizet, Etienne
Psychological evaluation of noise in passenger cars using the method of continuous judgment by catergory - Effect of visual monitoring
pp. 915-918(4)
Authors:
Kunano, Sonoko; Namba, Seiichiro; Hayakawa, Yoshikazu
Psychological evaluation of noise in passenger cars using the method of continuous judgment by category - Analysis of different noise sources
pp. 919-922(4)
Authors:
Namba, Seiichiro; Kuwano, Sonoko; Hayakawa, Yoshikazu
Analysis of the noise annoyance produced to the underground railway passengers
pp. 923-928(6)
Author:
Covitti, Arturo
Inter-laboratory comparison of low frequncy sound transmission - Finite element studies
pp. 929-932(4)
Authors:
Warnock, A.C.C.; Vorlander, M.
Inter-laboratory comparisions of low-frequency sound transmission: Conventional and intensity measurements
pp. 933-936(4)
Authors:
Vorlander, M.; Warnock, A.C.C.
Measurement of sound insulation at low frequencies
pp. 937-940(4)
Author:
Goransson, Clara
Laboratory experiments on loudness of floor impact sounds
pp. 941-944(4)
Authors:
Tachibana, Hideki; Yano, Hiroo; Iwamoto, Kiyoko; Hattori, Mizuho
Insulation of structure borne sound in a concert hall from railroads
pp. 945-948(4)
Author:
Hidaka, Takayuki
Normalized nosie spectra comparison with results obtained under Polish conditions
pp. 949-952(4)
Author:
Nurzynski, Jacek
Methods for measuring and identifying flanking transmission in wood-framed construction
pp. 953-956(4)
Author:
Nightingale, T.R.T
Train-induced vibrations on persons in the effect of buildings
pp. 957-960(4)
Authors:
Blasius, Ch.; Breuer, F.
Noise and vibration propagation in building renewal and occupant noise evaluation
pp. 961-964(4)
Authors:
Mugikura, Kyoji; Andow, Kei; Yoshida, Hiroshi; Isobe, Takashi
Estimation of low frequency noise from vibrating highway bridge
pp. 965-970(6)
Authors:
Goromaru, Hidehiro; Shiraishi, Katsuo; Hara, Hiroshi; Komori, Takeshi
Influence of sound-absorbing material stud type and spacing, and screw spacing on sound transmission through a double-panel wall specimen
pp. 971-974(4)
Authors:
Quirt, J.D.; Warnock, A.C.C.
The sound transmission of cavity walls due to studs
pp. 975-978(4)
Author:
Davy, John L.
Airborne sound insulation of plaster panels
pp. 979-982(4)
Authors:
Recuero, M.; Gil, C.; Sobreira, M.; Sanchez, J.
Sound transmission through suspended ceilings
pp. 983-986(4)
Authors:
Vercammen, M.L.S.; Scheers, Th.W.
Using maximal-length sequence methods for the measurement of high values of isolation
pp. 987-990(4)
Author:
Walker, Robert
Predicting in situ sound insulation
pp. 991-994(4)
Author:
Reis, Frigyes
Design and commissioning of a new floor sound transmission facility
pp. 995-998(4)
Authors:
Halliwell, R.E.; Quirt, J.D.; Warnock, A.C.C.
Prediction of the sound reduction of profiled metal cladding
pp. 999-1002(4)
Authors:
Windle, R.M.; Lam, Y.W.
Research on floor impact vibration of steel-framed prefabricated houses
pp. 1003-1006(4)
Authors:
Kojima, Yukio; Nakao, Tadashi
Acoustic insulation of prefabricated aluminum and steel panels
pp. 1007-1010(4)
Authors:
Gonzalez, Suarez J.; Sanchez, Rivera J.I.
A study on the relationship between the molecular structure of polyvinyl acetals and sound insulating property of laminated glass
pp. 1011-1014(4)
Authors:
Ueda, Naoki; Omura, Hirofumi; Shohi, Hajime; Asahina, Kenichi
Impact sound insulation of carpets predicted by carpet compression
pp. 1015-1018(4)
Authors:
Zafirova, Koleta; Jordanovski, Ljupco
Sound insulation in houses made of volumetric units
pp. 1019-1024(6)
Author:
Sedov, M.S.
Sound attenuation in unlined ducts with flexible walls
pp. 1025-1028(4)
Author:
Cummings, A.
Computer prediction of exhaust system performance
pp. 1029-1032(4)
Authors:
De Borger, Gerrit; Valgaeren, Rudi; Steenackers, Piet
Muffler design through non-dimensional four-pole modeling and direct impedance measurements
pp. 1033-1036(4)
Authors:
Lefebvre, Louis; Laville, Frederic
- Access Key
- Free content
- Partial Free content
- New content
- Open access content
- Partial Open access content
- Subscribed content
- Partial Subscribed content
- Free trial content