INTER-NOISE and NOISE-CON Congress and Conference Proceedings

In situ identification of the reflection coefficient of a closed side branch
pp. 1037-1040(4)
Authors: Adobes, A.; Lambert, C.; Saulnier, P.

Measurement of plane wave pressures in airflow duct by the two-microphone method in a slit-tube
pp. 1041-1044(4)
Authors: Terao, Michihito; Sekine, Hidehisa

Analysis of resonator mufflers with dynamic terminations
pp. 1045-1048(4)
Authors: Okamoto, Yasushi; Boden, Hans; Abom, Mats

Propagation of non-stationary signals in ducts in presence of a non-uniform flow
pp. 1049-1052(4)
Authors: Pagneux, V.; Marquette, G.; Froelich, B.

Standing waves in compliant or coated ducts
pp. 1053-1056(4)
Authors: Rizk, M.; Marquette, G.; Ligneul, P.

Structure borne sound diminishing through viscoelastic joints in a pipe installation
pp. 1057-1060(4)
Authors: Kosinska, N.; Nogalski, K.; Sliwinski, A.

High intensity discrete frequency noise abatement on industrial plants
pp. 1061-1064(4)
Authors: Semenov, A.G.; Gromov, Yu.I.; Rimshy-Korsakov, A.V.

Evaluating the transmission loss of muffler in exhaust system of engine using 1 over H(F)
pp. 1065-1070(6)
Authors: Liu, Zhigang; Zhang, Tianyuan; Zhang, Hongtian; Liu, Gongmin; Zhang, Wemping; Ma, Qiang

The significance of psychic alternations for the vegetative processing of noise
pp. 1071-1074(4)
Authors: Griefahn, Barbara; Brode, Peter

On discotheque noise
pp. 1075-1078(4)
Authors: Bisio, G.; Rubatto, G.

Disco-music and hearing loss among young adults
pp. 1079-1082(4)
Authors: Standaert, B.; Mertens, J.; Nelen, V.; Truyen, C.

Health effects of low-altitude flight noise
pp. 1083-1086(4)
Authors: Ising, H.; Curio, I.; Otten, H.; Rebentisch, E.; Schulte, W.

Psycho-acoustic study on the effect of duration on the annoyance of helicopter noise using time compressed or expanded sounds
pp. 1087-1090(4)
Authors: Ohshima, Toshiya; Yamada, Ichiro

Increase in mortality rates due to aircraft noise
pp. 1091-1094(4)
Authors: Meecham, W.C.; Shaw, N.A.

The effect of aircraft noise on the hearing of the aircraft staff at the Kotoka International Airport, Accra, Ghana
pp. 1095-1100(6)
Author: Fiaxe, Samuel

Development of a test setup for objective measurement of ear protectors
pp. 1101-1104(4)
Author: Klaus, Genuit

A laboratory installation for the subjective evaluation of noise from heavy weapons
pp. 1105-1108(4)
Authors: Rosenheck, Allan; Baschnagel, Karl; Butikofer, Rudolf

Results of a long-term program concerning noise control of industrial workplaces
pp. 1109-1112(4)
Authors: Mehnert, Peter; Griefahn, Barbara

Comprehensive assessment of environmental noise from petrochemical complex
pp. 1113-1116(4)
Author: Takahashi, Y.

Simulation of community noise from an existing large factory - Based on the measured noise contour map
pp. 1117-1120(4)
Author: Hirai, Masashi

Simulating loudness and damage-risk from impulse noise
pp. 1121-1124(4)
Author: Stevin, Guy O.

Measurement of sound attenuation of hearing protectors on artificial and human heads
pp. 1125-1128(4)
Authors: Fedtke, T.; Richter, U.

An investigation of the improvement in sound environment of open plan offices
pp. 1129-1132(4)
Authors: Furusawa, Takahiko; Nagatomo, Muneshige; Kan, Shin-ichiro; Tano, Masanori

Subjective tests of impulse noise annoyance and the listening environment
pp. 1133-1136(4)
Authors: Ikeda, M.; Flindell, I.H.

How important do people think quiet is for a residential environment?
pp. 1137-1140(4)
Author: Fujimoto, Kazutoshi

The problem of nuisance noise at night
pp. 1141-1144(4)
Authors: Dawber, K.R.; Bahr, J.L.

Noise from the Marnewaard shooting range: A review of sound and annoyance measurements
pp. 1145-1148(4)
Author: van den Berg, G.P.

Analysis and research method of noises in large open-plan offices in Japan
pp. 1149-1152(4)
Authors: Yamada, Yukiko; Ohmori, Ryouji

Subjective and objective assessments of tram noise in city Alexandria
pp. 1153-1156(4)
Authors: Alim, Onsy A.; Zaki, Nagwa A.

The experimental investigations of low frequency noises in the everyday life
pp. 1157-1162(6)
Authors: Fraiman, B.J.; Ivannikov, A.N.; Pavlov, V.I.

A study of the audible noise around UNV transmission lines in Poland
pp. 1163-1166(4)
Authors: Engel, Zhegniew; Wszolek, Tadeusz

The influence of the energy saving measures on the noise of the induction motor
pp. 1167-1170(4)
Author: Timar, P.L.

Inverter supplied electrical machines: An approach to predicting vibrations and audible noise
pp. 1171-1174(4)
Authors: Verdyck, D.; Belmans, R.; Geysen, W.

Acoustic studies of switched reluctance motors
pp. 1175-1178(4)
Authors: Lai, J.C.S.; Milthorpe, J.F.; Pulle, D.W.J.; Huynh, N.

Annoyance from inverter-fed induction motors
pp. 1179-1182(4)
Authors: Ekdahl, Ingvar; Sjoberg, Lars; Weibull, Henriette; Valis, Jari

Analysis and measurement of acoustic noise in AC induction motors subjected to pulsating mechanical loads
pp. 1183-1188(6)
Authors: Lisner, R.P.; Alfredson, R.J.

Structure borne sound transmission at low frequencies using statistical energy analysis and finite element methods
pp. 1189-1192(4)
Authors: Steel, John A.; Craik, Robert J.M.

Energy flow in an L-shaped plate
pp. 1193-1196(4)
Authors: Fredo, Claes R.; Sanderson, Michael A.

The SEA of two nominally identical rectangular plates - A wave solution
pp. 1197-1200(4)
Authors: Wester, E.C.N.; Mace, B.R.

Loss factor determination for statistical energy analysis on a fully assembled diesel engine with geometric average approach
pp. 1201-1204(4)
Authors: Wu, Lie; Agren, Anders; Sundback, Ulrik

Study of the effect of the plate stiffeners on the structure-borne noise transmission on board ships, using the statistical energy analysis
pp. 1205-1208(4)
Authors: Taroudakis, Michael I.; Lyridis, Dimitrios V.; Pliatsikas, Kostas

Bending wave transmission in multi-connected plates
pp. 1209-1214(6)
Authors: Kim, Hyun S.; Kang, Hyun J.; Kim, Jae S.

Noise of gas handling systems
pp. 1215-1218(4)
Authors: Asselineau, M.; Arbey, H.S.

Influences of absorptive layer on vibration and noise levels of water filled elastic pipes
pp. 1219-1222(4)
Author: Feng, Leping

No-media silencer design based on micro-perforation theory
pp. 1223-1226(4)
Author: Wu, Mei Q.

Measurement of acoustic power for a tube air flow and correlation with exit pulsation velocity
pp. 1227-1230(4)
Authors: Ramesh, V.; Vermeulen, P.J.; Munjal, M.L.

Reducing the aerodynamic noise with vanes for diverting flow
pp. 1231-1234(4)
Author: Maruta, Yoshiyuki

Characterisation of fluid machines as acoustic two-port sources -Test of a measurement method
pp. 1235-1238(4)
Authors: Boden, H.; Aboms, M.; Lavrentjev, J.

An approximate calculation of the acoustic output from interfering jets
pp. 1239-1242(4)
Authors: He, C.H.; Rosenberg, H.

Measurement of acoustic intensity vector in duct with flow
pp. 1243-1246(4)
Authors: Benhammou, M.; Ville, J.M.

Intensity of acoustic energy flux in a flowing medium
pp. 1247-1250(4)
Author: Trakhtenbroit, Moissei

Establishing a relationship between the flow and acoustic parameters of turbomcahinery inlet tubes
pp. 1251-1256(6)
Author: Tokarz, Tadeusz

Calibration signals for meters of loudness, sharpness, fluctuation strength, and roughness
pp. 1257-1260(4)
Author: Fastl, Hugo

A simple vibrational volume velocity transducer
pp. 1261-1264(4)
Authors: Holland, K.R.; Fahy, F.J.

Spatial integration of vibration with a volume displacement microphone
pp. 1265-1268(4)
Author: Lindblad, Sven

Two indicators for characterizing the degree of coherence in sound fields
pp. 1269-1272(4)
Authors: Li, J.F.; Pascal, J-C.; Carles, C.

Interfering noise reduction in sound intensity measurement using a microphone array with consideration of wavelength constant
pp. 1273-1276(4)
Authors: Kuroiwa, Kazuharu; Chisaki, Yoshihumi

Laboratory methods for calibration of intensity probes
pp. 1277-1280(4)
Authors: Biron, D.; Pauzin, S.; Pepin, H.

Second generation acoustical coupler for phase match of microphones
pp. 1281-1284(4)
Author: Wong, George S.K.

Microphones for peak pressure measurements
pp. 1285-1288(4)
Author: Rasmussen, Gunnar

Sound calibrator based on silicon reference transducer
pp. 1289-1292(4)
Author: Bjor, Ole-Herman

A study on time inteval in measuring urban noises
pp. 1293-1296(4)
Authors: Shouichi, Tanaka; Kazuo, Konisi

Probability distribution of equivalent continuous A-weighted sound pressure level (LAeqT)
pp. 1297-1300(4)
Authors: Makarewicz, R.; Kokowski, P.; Krasnowska, I.

Measurement of moment mobility using a moment actuator
pp. 1301-1306(6)
Authors: Shuye, Qiu; Gibbs, B.M.; Petersson, B.A.T.

Multi-reference nearfield acoustical holography in reflective environments
pp. 1307-1310(4)
Authors: Hallman, Darren L.; Bolton, J. Stuart

Noise source localization of highspeed trains using different array tyres
pp. 1311-1314(4)
Authors: Bruhl, S.; Schmitz, K-P.

Localization of aeroacoustic sources using a tridimensional intensimetry method
pp. 1315-1318(4)
Authors: Foulon, H.; Patrat, J.C.; Gervais, Y.; Laumonier, J.

Application of acoustical holography to noise source detections of an operating Maglev vehicle
pp. 1319-1322(4)
Authors: Tanaka, Takeharu; Sakamoto, Ichirou

Application of noise ranking techniques
pp. 1323-1326(4)
Authors: Wang, Percy F.; Davies, Patricia

Wave-number filtering with double-layer cylindrical antenna in acoustical holography
pp. 1327-1330(4)
Authors: Garcia, A.; Der Matheossian, J.Y.; Pascal, J.C.; Carles, C.

A method to estimate the acoustic holography using a sub-array decreasing the effect of other sound sources and reflections
pp. 1331-1334(4)
Authors: Hongo, Satoshi; Abe, Masato; Nemoto, Yoshiaki; Chubachi, Noriyoshi

The use of a newly developed multi-channel analysis technology for determining noise quality of sounds inside cars
pp. 1335-1338(4)
Authors: Genuit, Klaus; Elmar, David

Limitation and applicability of array microphone on the characterization of automobile engine noise
pp. 1339-1342(4)
Authors: Kim, Yang-Hann; Choi, Jae-Woong; Kwon, Hyu-Sang; Park, Youn-sik

Test reverberation chambers for high power vehicles noise simulation acoustical design principles
pp. 1343-1348(6)
Authors: Semenov, A.G.; Sheyko, V.V.

Noise investigation of a waste gas incinerator
pp. 1349-1352(4)
Authors: Burton, D.R.; Welch, L.W.

Development of efficient methods to reduce the noise level of dishwashers
pp. 1353-1356(4)
Authors: Ozturk, Cuneyt; Eksert, Semsettin

Noise control of a wheel loader
pp. 1357-1360(4)
Authors: Carletti, E.; Vercchi, I.

Studies to declare emitted noise levels of the household appliances
pp. 1361-1364(4)
Author: Ozturk, Cuneyt

Noise and vibration control in the concrete products industry
pp. 1365-1368(4)
Authors: Koopmans, J.F.W.; Luykx, M.P.M.

Studies to evaluate the signal characteristics of series fractional horse power motors
pp. 1369-1372(4)
Authors: Ozturk, Cuneyt; Balikcioglu, Ahmet

Noise reduction of a vacuum cleaner
pp. 1373-1376(4)
Authors: Lyon, R.H.; Song, H.H.; Hwang, G.B.

Prediction of vibration and noise of a gear box
pp. 1377-1380(4)
Authors: Zhixin, Chen; Xiaoyu, Jiang

Studying on reducing noise of 30 AE/AQ pumps
pp. 1381-1384(4)
Authors: Gong, Nongbin; Mao, Tunghing; Cheng, Shijie; Wang, Jirong

About some specific problems encountered in noise control of heat recovery steam generators
pp. 1385-1388(4)
Author: De Mullewie, G.

Wind tunnel study of 3DF sound propagation in presence of a hill and of a wind gradient
pp. 1389-1392(4)
Authors: Malbequi, P.; Delrieux, Y.; Canard-Caruana, S.

Reduction of the emitted noise at a generator installed in building
pp. 1393-1396(4)
Authors: Kotschy, Andas; Perenyi, Rezso

Simulation and control of noise production from plasma torches in continous casting processes
pp. 1397-1400(4)
Authors: Pisoni, C.; Tagliafico, L.; Brunelli, A.; Cortese, R.

Noise reduction of a brake for a washing machine
pp. 1401-1404(4)
Authors: Shindo, Masato; Ito, Masumi

Structure borne noise from rotor blades of wind turbines
pp. 1405-1408(4)
Authors: Andersen, Bent; Jakobsen, Jorgen

Noise characteristics produced by ploughs in underground coal mines in Leon (Spain)
pp. 1409-1412(4)
Authors: Ortiz, D. Garcia; Cepeda, J.; Baladron, G.; Melson, B.; Vidal, I.

Noise control in the large cord spinning mill
pp. 1413-1416(4)
Authors: Lipinski, L.F.; Srodecki, K.; Malinowski, K.; Kardynal, M.

Vibration and noise of rotor machinery with large-sized gears
pp. 1417-1420(4)
Author: Kychma, Andriy

Noise emission from glass bottles - Prediction and measurements
pp. 1421-1424(4)
Author: Ekstrom, Roger

Noise reduction of portable electric drill
pp. 1425-1428(4)
Authors: Yokoi, Masayuki; Nakai, Mikio

A preliminary noise study of an expanded-metal press
pp. 1429-1432(4)
Authors: Eager, D.M.; Williamson, H.K.; Lai, J.C.S.; Harrap, M.J.

New design of a barking drum as a result of acoustical investigation of its modes
pp. 1433-1436(4)
Author: Zielinski, T.

Noise norms ensuring during design
pp. 1437-1442(6)
Author: Tsukernikov, I.E.

The level/time evolution of passing trains to evaluate the noise impact of T.G.V. Part I: Mathematical development
pp. 1443-1446(4)
Authors: Houtave, Peter; Clairbois, Jean-Pierre

The level/time evolution of passing trains to evaluate the noise impact of T.G.V. Part II: Practical validation
pp. 1447-1450(4)
Authors: Clairbois, Jean-Pierre; Houtave, Peter; Weyers, Emmanuel

Noise control of tramcar noise by grinding the rails
pp. 1451-1454(4)
Author: Riemens, Siegfried