INTER-NOISE and NOISE-CON Congress and Conference Proceedings

The high speed civil transport technology challenge
pp. 3-8(6)
Author: Mortlock, Alan K.

Past and present UK research on aircraft noise effects
pp. 9-18(10)
Author: Ollerhead, J.B.

Air-moving device noise - An overview
pp. 21-26(6)
Author: Maling Jr., George C.

Method for characterizing aerodynamic sound sources with application to ducted low-speed axial cooling fans
pp. 27-32(6)
Authors: Mongeau, L.G.; Quinlan, D.A.

Fan noise: Plenum versus box
pp. 33-38(6)
Author: Humbad, Niranjan G.

Fan acoustical quality: State-of-the-art
pp. 39-44(6)
Author: Pei, Hsien-sheng

Using the Maling plenum to characterize small air-moving device noise - A review with some applications
pp. 45-50(6)
Author: Dunens, Egons K.

Concepts for the control of rotor noise
pp. 51-56(6)
Authors: Lemont, Harold E.; Burward-Hoy, Trevor

Studies of blade-vortex interaction noise reduction by rotor blade modification
pp. 57-66(10)
Author: Brooks, Thomas F.

Numerical and flight measured interior noise characteristics of a twin-engine turboprop general aviation aircraft
pp. 67-72(6)
Authors: Marulo, F.; Lecce, L.; De Rosa, S.; d'Amato, C.A.; Verde, G.

Flow through corrugated tubing as an acoustic source
pp. 73-78(6)
Authors: Taylor, Lisa R.; Prasad, M.G.

Aerodynamic noise and vibration sources for high-speed elevator cars
pp. 79-84(6)
Authors: Lavrich, Philip L.; Derwinski, Tricia; Presz Jr., Walt M.

Aircraft noise at a west coast airport in the next century
pp. 85-90(6)
Author: Haboly, Edward F.

A real-time engineering control for the reduction of chain-conveyor noise
pp. 91-96(6)
Authors: Kohler, Jeffery L.; Burks, J. Alton; Bartholomae, Roy C.; Thimons, Edward D.

Experimental study of combustion noise generated by oxygen-fuel burners
pp. 97-102(6)
Author: Song, Xin-Rong Cindy

Acoustic optimization of internal combustion engine induction systems
pp. 105-110(6)
Authors: Eversman, Walter; White, John

Boundary element analysis of the acoustic field inside three-dimensional regular and irregular ducts
pp. 111-116(6)
Authors: Pates III, Carl S.; Shirahatti, Uday

High-frequency acoustic radiation from a curved duct of circular cross section
pp. 117-122(6)
Author: Lewy, S.

Enroute NASA/FAA low-frequency propfan text in Alabama (October 1987) - A versatile atmospheric aircraft long-range noise prediction system
pp. 123-128(6)
Author: Tsouka, Despina G.

Broadband noise from ducted prop fans generated by blade wakes
pp. 129-134(6)
Author: Glegg, Stewart A.L.

A prediction method for broadband shock associated noise from supersonic rectangular jets
pp. 135-140(6)
Authors: Tam, Christopher K.W.; Reddy, N.N.

Reduction of supersonic jet noise using swirl - A concept revisited
pp. 141-144(4)
Author: Knowles, K.

Evaluation of a model for boundary-layer induced noise in aircraft
pp. 145-150(6)
Author: Graham, W.R.

Evaluation of prediction methods for fluctuating pressures under attached turbulent boundary layers using flight test data
pp. 151-156(6)
Authors: Powell, E.A.; Hampson, C.D.; Reddy, N.N.

Progressive wave equations and algorithms for sonic boom propagation
pp. 157-162(6)
Author: Pierce, Allan D.

A total variation diminishing finite difference algorithm for sonic boom propagation models
pp. 163-168(6)
Author: Sparrow, Victor W.

A survey of propfan noise propagation at cruise
pp. 169-174(6)
Authors: Sim, Ben Wel-C.; George, Albert R.

Spatial correlation of acoustic scattering in a forest: Models and measurements
pp. 175-180(6)
Authors: Chen, Pu; Mueller, Arnold W.; Rogers, James C.

Sound field computations for moving sources and/or moving, stratified media
pp. 181-186(6)
Author: Wilson, D. Keith

Aeroacoustic sources of high speed MagLev trains
pp. 187-192(6)
Author: Hanson, Carl E.

Influence of flow rate on aerodynamic noise generation in centrifugal turbomachinery
pp. 193-198(6)
Authors: Bent, Paul H.; McLaughlin, Dennis K.; Thompson, Donald E.

Lighweight, high transmission loss, active enclosure with air gaps
pp. 201-206(6)
Authors: Fuller, C.R.; White, C.A.

Determination of the number of input transducers required for active control of road noise inside automobiles
pp. 207-212(6)
Authors: Heatwole, Craig M.; Dian, Xu; Bernhard, Robert J.

Evaluating the performance of active noise control systems in commercial and industrial applications
pp. 213-218(6)
Authors: Dineen, Susan; Depries, Chris; Lowe, Mick; Wise, Steve

Aircraft interior sound field analysis in view of active control: Results from the ASANCA project
pp. 219-224(6)
Authors: Van der Auweraer, H.; Venet, G.; Otte, D.; Catalifaud, J.

Experimental active control of sound in the ATR 42
pp. 225-230(6)
Authors: Paonessa, A.; Sollo, A.; Paxton, M.; Purver, M.; Ross, C.F.

An optimal block adaptive algorithm for active control of sound
pp. 231-236(6)
Authors: Shenm, Qun; Spanias, Andreas

Smart actuators: The key to successful active noise and vibration control
pp. 237-240(4)
Authors: Berhault, J.P.; Venet, G.; Cellard, P.

Hangars as noise barriers for helicopter noise
pp. 241-246(6)
Authors: Pater, Larry; Yousefi, Raman

Computational simulation of Helmholtz resonators: Lumped versus distributed volume
pp. 247-252(6)
Authors: Selamet, A.; Dickey, N.S.; Novak, J.M.

Diffusorblox: The complete acoustical concrete masonry unit
pp. 253-258(6)
Authors: D'Antonio, Peter; Jensen, Troy

The disc project: Directional scattering coefficient determination and auralization of virtual environments
pp. 259-264(6)
Author: D'Antonio, Peter

Effect of Mylar surface films on acoustic fill on silencers performance
pp. 265-272(8)
Author: Liang, Paul N.

Active control of sound in rigid walled ducts of arbitrary length and termination conditions
pp. 273-278(6)
Authors: Hansen, Colin H.; Zander, Anthony C.

Enhanced broadband absorption for duct liners by means of spatially varying impedances
pp. 279-284(6)
Authors: Jones, Michael G.; Parrott, Tony L.

The effect of mounting on the acoustical properties of finite-depth polymide foam layers
pp. 285-290(6)
Authors: Kang, Y.J.; Tsoi, W.; Bolton, J.S.

A time domain based computational approach for perforated tube silencers
pp. 291-296(6)
Authors: Selamet, A.; Dickey, N.S.; Novak, J.M.

Active noise cancellation - Effectiveness for auxiliary mine ventilation systems
pp. 297-302(6)
Authors: Bartholomae, Roy C.; Rider, James P.

Reducing low frequency noise emissions from a Langley Air Force Base hush-house
pp. 303-308(6)
Authors: Schiff, Morton I.; Collings, David A.; Hirschorn, Martin

Practical aspects of active vibration control
pp. 311-316(6)
Author: Curtis, Alan R.D.

Case study of system effects on high frequency vibration isolation in aircraft structure
pp. 317-320(4)
Authors: Simmons, William E.; Marshall, Steven E.

Acoustical design of the new Cathay Pacific First Class Lounge
pp. 323-328(6)
Author: Hong, Westwood K.W.

Standardization of aircraft noise insulation measures without compromising results
pp. 329-332(4)
Authors: Hougland, Dana S.; Barnhardt, Michael B.

Architectural glazing for sound attenuation at an airport hotel
pp. 333-338(6)
Author: Merck, Harold L.

Evolution in the Massport sound insulation program
pp. 339-344(6)
Authors: Rosenberg, Carl; Incerto, Edward; Jones, Randolph; Savereid, Christopher

Spectral identification of industrial noise sources - A case study
pp. 345-348(4)
Authors: Ingold, Dan; Steedman, Jim

Measurements on tramway noise in Alexandria
pp. 349-354(6)
Authors: Alim, O. Abdel; Zaki, N.

Noise control of a 50 MW combustion turbine power plant
pp. 355-360(6)
Authors: Bradley, Wayne E.; Theriault, Michael D.; Butler, Donald A.

Law as a part of noise control program
pp. 361-364(4)
Author: Slupik, Vera

Recent laboratory studies of loudness and annoyance response to sonic books
pp. 367-372(6)
Authors: Leatherwood, Jack D.; Sullivan, Brenda M.

A review of Air Force policy and noise models pertaining to the noise environment under low-altitude, high-speed training areas
pp. 373-378(6)
Authors: Cook, Brenda W.; Lucas, Michael J.

The effect of onset rate on annoyance to military aircraft noise
pp. 379-384(6)
Authors: Stusnick, Eric; Plotkin, Kenneth J.; Bradley, Keven A.; Molino, John A.

Plaster damage experiments at the BBN sonic boom test facility
pp. 385-390(6)
Author: Sneddon, Matthew D.

Development and field test of the Beta version of the USAF assessment system for aircraft noise (ASAN)
pp. 393-398(6)
Authors: Kugler, B. Andrew; Sharp, Paul A.; Finegold, Lawrence S.

Environmental noise research using the human response monitor (HRM): Phase I - System development
pp. 399-402(4)
Authors: Sneddon, Matthew D.; Finegold, Lawrence S.

Improvement of the predicted aural detection code ICHIN (I can hear it now)
pp. 403-408(6)
Authors: Mueller, Arnold W.; Smith, Charles D.; LeMasurier, Phillip

Selected optimum sonic boom monitoring sites in a special-use airspace
pp. 409-414(6)
Author: Lucas, Michael J.

The evolution of airport noise monitoring systems: Recent achievements and further needs
pp. 415-420(6)
Author: Baldwin 3rd, Edward M.

Identification of noise events as aircraft
pp. 421-424(4)
Author: Timmerman, Nancy S.

Features of Massport's new noise monitoring system
pp. 425-428(4)
Author: Timmerman, Nancy S.

Noise monitoring under military training routes
pp. 429-434(6)
Authors: Frampton, Kenneth D.; Bradley, Kevin A.

Optimal pultrusion process conditions for improving the dynamic properties of graphite-expoxy composite beams
pp. 435-440(6)
Authors: Kowsika, Murthy; Mantena, P. Raju

Ultrasonic characterization of composites
pp. 441-446(6)
Author: Raju, P.K.

Composite material anomaly characterization using advanced ultrasonic methods
pp. 447-452(6)
Authors: Balasubramaniam, K.; Issa, C.A.; Alluri, S.; Ji, Y.

Non-destructive evaluation of pultruded composites
pp. 453-458(6)
Authors: Dayal, Vinay; Yang, Xinlian; Hsu, David K.

Noise and vibration control in aircraft - A global approach
pp. 459-462(4)
Authors: Bernault, J-P.; Venet, G.; Fontenot, J.

ASTRYD: A new numerical tool for aircraft cabin and environmental noise predictions
pp. 463-466(4)
Authors: Berhault, J.P.; Venet, G.; Clerc, C.

Application of FEM/SEA for prediction of aircraft cockpit noise
pp. 467-472(6)
Author: Engelstad, S.P.

Prediction of airplane cabin noise due to engine shock cell excitation using statistical energy analysis
pp. 473-478(6)
Author: Marshall, Steven E.

A technique for performing source identification in reflective environments by using nearfield acoustical holography
pp. 479-484(6)
Authors: Hallman, Darren; Bolton, J. Stuart

A large hemi-anechoic enclosure for community-compatible aeroacoustic testing of aircraft propulsion systems
pp. 485-490(6)
Author: Cooper, Beth A.

Experimental vibro-acoustic system modeling in the medium frequency area; An impedance modelling approach
pp. 491-496(6)
Authors: Otte, Dirk; Van Der Auweraer, Herman

The significant of binaural measurement and analysis technique for aurally-adequate sound evaluation
pp. 497-502(6)
Authors: Genuit, Klaus; Burkhard, Mahlon

Calibrating 1/4" condenser microphones to 100 kHz using a point-like source simulation device
pp. 503-510(8)
Authors: Brown, Martha C.; Selner, John M.

Evaluation of global acoustic sensitivities using a combined finite element/boundary element formulation
pp. 511-516(6)
Authors: Coyette, J.P.G.; Wynendaele, H.; Chargin, M.

Application of chaotic theory to nonlinear noise and vibration measurement and analysis
pp. 517-522(6)
Author: Gan, W.S.

Assessment of computational methods for acoustic analysis
pp. 523-528(6)
Authors: Scott, James N.; Yao, Yi-Ping

Computation of sensitivities for passive noise control
pp. 529-534(6)
Authors: Vlahopoulos, Nickolas; Dagg, Cecillia; Bernhard, Robert J.

Numerical investigation of sound transmission through double wall cylinders with respect to active noise control
pp. 535-540(6)
Authors: Coats, T.J.; Silcox, R.J.; Lester, N.C.

Feedforward higher harmonic control using the H-tag algorithm
pp. 541-546(6)
Authors: Gibbs, Gary P.; Clark, Robert L.

Prediction of sound levels in an isolated locomotive cab by the finite element method
pp. 547-552(6)
Authors: Huang, Mark; Carlson, William

The influence of source acceleration on acoustic signals
pp. 553-558(6)
Authors: Kelly, Jeffrey J.; Wilson, Mark R.

Effects of signal analysis parameters and noise removal on measured aircraft spectra
pp. 559-564(6)
Authors: Kelly, Jeffrey J.; Wilson, Mark R.

Development of a measurement technique to evaluate rotor chatter in twin screw compressors
pp. 565-570(6)
Authors: Huff Jr, John E.; Jones, James D.

Aeroacoustic sound source localization of wind turbine rotor blade
pp. 571-576(6)
Authors: Nii, Yoshinori; Gotanda, Tetsuro

A hybrid scheme for noise radiation from ducted fans
pp. 577-582(6)
Authors: Ozyoruk, Y.; Long, L.N.

SEA modelling of ship structures
pp. 583-588(6)
Authors: Kang, Hyun J.; Kim, Hyun S.; Kim, Jae S.; Lee, Young C.

Some overlooked factors in the calculation of motor traffic noise in terms of equivalent noise in "LEQ"
pp. 589-594(6)
Author: Wang, Paul

Incorporation of topography effects in aircraft noise modeling
pp. 595-600(6)
Authors: Plotkin, Kenneth J.; Moultono, Carey L.; Lee, Robert A.

Active control of the directivity of a sound source
pp. 601-606(6)
Authors: Santiago, Teresa; Bernhard, Robert J.

Influence of clutch design on the reduction and perception of automotive transmission rattle noise
pp. 607-612(6)
Authors: Padmanabhan, Chardramouli; Singh, Rajendra

Error induced in bending wave power measurements resulting from the presence of longitudinal waves. Part 2
pp. 613-618(6)
Authors: Kay, Kelly; Swanson, David C.

Computation of aerosound from turbulent flow fields using large-eddy simulation
pp. 619-624(6)
Author: Lee, Seungbae

Determination of source impedance by direct method using a modified transfer function
pp. 625-630(6)
Authors: Kim, W.S.; Prasad, M.G.

Current status of measurement standard for vibration testing of small air-moving devices
pp. 633-636(4)
Authors: Koch, John; Polding, Michael

Competitive of noise level labels of the household appliances for the benefits of the consumers
pp. 637-640(4)
Author: Ozturk, Cuneyt