INTER-NOISE and NOISE-CON Congress and Conference Proceedings

50 years of noise control: A personal history
pp. 3-10(8)
Author: Beranek, Leo L.

Practical use of acoustic technology for measurements of energy flow, holography and wavelets
pp. 11-28(18)
Author: Bruel, Per V.

Perception of noisiness
pp. 29-42(14)
Author: Kryter, Karl D.

Designing products to sound good
pp. 43-50(8)
Author: Lyon, Richard H.

Proposal for a long range national noise control policy based on cooperation among government, industry and the research community
pp. 51-58(8)
Author: Ver, Istvan L.

Quality planning to reduce the noise of manufactured products
pp. 61-68(8)
Authors: Pei, Hsien-sheng; Watson, Jack

A review of quality control methods for acoustical and noise control products developed over four decades
pp. 69-76(8)
Authors: Hirschorn, Martin; Schiff, Morton I.

Bearing fault detection in the acoustic emission frequency range
pp. 79-86(8)
Author: Tavakoli, Massoud S.

Development of a signal processing technique for the objective rating of gear noise
pp. 87-94(8)
Authors: Blankenship, G. Wesley; Singh, Rajendra

Gear "ghost" noise - A case history using single flank transmission error measurements
pp. 95-102(8)
Authors: Houser, Donald R.; Biggert, Peter

Evaluation and control of induced draft fan noise at a municipal waste treatment facility
pp. 103-110(8)
Author: Barnes, James D.

Variability of cooling fan noise
pp. 111-118(8)
Author: Potter, Allen

Precision of a new international standard for measurement of fan noise - ISO/DIS 10302
pp. 119-126(8)
Author: Lotz, Robert

Fan noise due to flat plate near inlet and outlet
pp. 127-132(6)
Authors: Humbad, N.G.; Hsieh, Hsiao-an

Active noise control of mine auxiliary ventilation
pp. 133-140(8)
Authors: Stein, Robert R.; Bartholomae, Roy C.

Identification of pure tones radiated by a computer disk drive
pp. 141-148(8)
Authors: Lee, Ming-ran; Singh, Rajendra

Noise emissions of snow making nozzles
pp. 149-154(6)
Author: Bollard, Paul

Noise control of sanitation vehicles
pp. 155-162(8)
Author: Satanovsky, Alexander

Acoustic emission studies on carbon-carbon composites
pp. 165-172(8)
Authors: Vaidya, U.K.; Raju, P.K.; Crocker, Malcolm J.

Thermoacoustic prime movers as high-intensity sources
pp. 173-180(8)
Author: Ward, William

The reflection phase grating acoustical diffuser
pp. 181-188(8)
Author: D'Antonio, Peter

Numerical studies of sound propagation in the atmospheric convective boundary layer using a large-eddy simulation
pp. 189-196(8)
Author: Wilson, D. Keith

A single-parameter model for the characterization of asphalt's acoustical properties
pp. 197-204(8)
Authors: Van Wyk, K.D.; Bolton, J.S.; Sherman, P.J.

Source-load interaction studies of a piston-cavity system using boundary element method
pp. 205-212(8)
Authors: Kim, W.S.; Prasad, M.G.

Characterization of acoustical sources in duct systems - Progress and future trends
pp. 213-220(8)
Author: Prasad, M.G.

Gas turbine exhaust system silencing design
pp. 223-230(8)
Authors: Tatge, R. Bruce; Ozgur, Dincer

Compact sound-absorbing structures for low frequencies
pp. 231-238(8)
Authors: Lee, Jinkyo; Swenson Jr, George W.

ANC vs standard hearing protectors performance - Ideal and non-ideal conditions
pp. 239-244(6)
Authors: Bartholomae, Roy C.; Stein, Robert R.

Spatial extent of active noise control in an automobive vehicle
pp. 245-252(8)
Authors: Dian, Xu; Bernhard, R.J.

An update of commercial experience in silencing air moving devices with active noise control
pp. 253-258(6)
Authors: Burtage, K.; Kapsos, D.; Depies, C.; Dineen, S.; Goodman, S.; Wise, S.

Active noise control of high order modes in ducts
pp. 259-266(8)
Authors: Stell, James D.; Bernhard, Robert J.

Optimal placement of piezoelectric actuators for active control of sound radiation from elastic plates
pp. 267-274(8)
Authors: Wang, Bor-Tsuen; Burdisso, Ricardo A.; Fuller, Chris R.

A study of the modal response characteristics of piezo-actuator driven shells for active noise and vibration control
pp. 275-282(8)
Authors: Sonti, Venkata R.; Jones, James D.

A study of actuators for active control of distributed elastic systems
pp. 283-290(8)
Authors: Kim, S.J.; Jones, J.D.

Evaluation of different forms of cost functions in the design of active structural-acoustic control systems
pp. 291-298(8)
Authors: Wang, Bor-Tsuen; Fuller, Chris R.

A comparison of control strategies for minimizing the sound field in enclosures
pp. 299-306(8)
Authors: Sommerfeldt, Scott D.; Nashif, Peter J.

Vibration measurements of small fans
pp. 309-314(6)
Author: Pei, Hsein-sheng

Measurements of the vibrational power flow in beams and plates using the structural intensity method
pp. 315-322(8)
Authors: Xie, Huajun; Crocker, Malcolm J.

Structureborne noise reduction using the composite bonding technique
pp. 323-328(6)
Author: Ng, Kam W.

Vibration attenuation in soil
pp. 329-336(8)
Author: Hubach, Frank J.

Improving shock and vibration isolator performance through total quality management
pp. 337-344(8)
Author: Koval, Edwin J.

Active isolation of vibrations with adaptive structures
pp. 345-352(8)
Authors: Guigou, C.; Fuller, C.R.; Wagstaff, P.R.

A pseudo-cascade FXLMS approach to active vibration cancellation
pp. 353-360(8)
Authors: Browning, Douglas R.; Morgan, Dennis R.

NDE applications of damping measurements
pp. 361-368(8)
Author: Mantena, P. Raju

Behavior and measurement of the dynamic properties of rubber-like materials
pp. 369-378(10)
Author: Lewis, Thomas M.

Characterization of the dynamic mechanical properties of polymers
pp. 379-386(8)
Author: Ganeriwala, S.N.

Practical application of single-degree-of-freedom vibration absorbers to industrial pumps
pp. 387-394(8)
Authors: Sembler, W.; Marscher, W.

Historic artwork preservation and vibration mitigation during building renovation
pp. 395-402(8)
Authors: Neal, Stephen R.W.; Hubach, Frank J.

Noise level in the offices
pp. 405-412(8)
Author: Tandara, V.

Noise level of the fans in the new flats
pp. 413-420(8)
Authors: Tandara, M.; Tandara, V.

Computer model for estimating electric utility environmental noise
pp. 421-428(8)
Authors: Teplitzky, Allan M.; Hahn, Kathy J.; Keast, David

Measurements on noise from rotary coal unloading operations
pp. 429-434(6)
Authors: Adams, Thomas S.; Bilello, Michael A.

Implementation of a noise control program for the Boston harbor waste water treatment facility
pp. 435-440(6)
Authors: Bradely, Wayne E.; Maxon, Christonpher M.; Davies, Grant E.; Lager, John A.

Development and use of binarual measurement technique
pp. 443-450(8)
Authors: Bray, Wade; Burkhard, Mahlon; Genuit, K.; Gierlich, H.W.

Binaural technique for the objective measurement of subjectively perceived sound quality
pp. 451-458(8)
Author: Genuit, Klaus

An evaluation of binaural measurement systems as acoustic transducers
pp. 459-466(8)
Authors: Mandic, Douglas S.; Donavan, Paul R.

Effect of envelope shape on the perception of sound quality
pp. 467-474(8)
Authors: Laux, Peter; Davies, Patricia

A procedure for determining the prominence ratio of discrete tones in noise emissions
pp. 475-482(8)
Authors: Nobile, Matthew A.; Bienvenue, Gordon R.

Binaural measurements of loudness as a parameter in the evaluation of sound quality in automobiles
pp. 483-490(8)
Authors: Michel, Greg; Ebbitt, Gordon

Predicting the loudness of tone-noise complexes from Steven's and Zwicker's procedures
pp. 491-498(8)
Author: Hellman, Rhona P.

The loudness of quasi continuous impulse noise
pp. 499-506(8)
Authors: Balant, Anne C.; Levitt, Harry

Prominence balancing experiments for noise spectra containing discrete tones
pp. 507-514(8)
Authors: Bienvenue, G.R.; Nobile, M.A.; Barker, M.E.

Re-evaluating the use of the A-weighted sound level for environmental noise impact assessment
pp. 515-522(8)
Authors: Goodfriend, Lewis S.; Alexander, Martin

An acoustic vector-field probe with calculable obstacle bias
pp. 525-532(8)
Author: Elko, Gary W.

A new computerized technique for simultaneous measurement of wave speed and thickness by ultrasound
pp. 533-540(8)
Author: Dayal, Vinay

Biased against finite-difference bias
pp. 541-546(6)
Author: Elko, Gary W.

ECMA sound intensity procedure (draft) for computer equipment: Scanning method for controlled environments
pp. 547-552(6)
Authors: Hellweg Jr, Robert D.; Gibson, Robert G.

Assuring the accuracy of intensity measurements
pp. 553-560(8)
Author: Ebbitt, Gordon L.

Identification of the bus interior noise using sound intensity measurement method
pp. 561-568(8)
Authors: Cudina, M.; Zelezic, E.

Synchronously sampled sound intensity measurements on rotating machinery
pp. 569-574(6)
Author: Hedeen, Robert A.

Gated sound-power measurement using sound intensity
pp. 575-582(8)
Authors: Wei, Wei; Hickling, Robert; Lee, Peng

Performance verification of sound intensity probes and instruments
pp. 583-590(8)
Author: Krishnappa, G.

Sound intensity probe for underwater acoustic measurements
pp. 591-596(6)
Author: Ng, Kam W.

Acoustical property determination by a personal computer system
pp. 597-602(6)
Authors: Mohanty, A.R.; Seybert, A.F.; Strong, W.F.

Airflow and acoustic performance of full- and half-sized INCE test plenums used for determining fan noise emissions
pp. 603-608(6)
Authors: James, Colin; Azari-Vala, Afshin

Reverberation time measurements in small, sound-absorbing enclosures: Shortcomings and alternatives
pp. 609-616(8)
Author: Nelson, David

Fan vibration measurements on the INCE plenum box - Apparatus size limitations
pp. 617-624(8)
Author: Wittig, Larry E.

Different methods of analysis adapted to some commonly occurring vehicle noise conditions
pp. 625-632(8)
Author: Sorenson, Steven R.

Application of group delay to noise problems
pp. 633-640(8)
Authors: Liu, Lan; Lyon, Richard H.

FASTSEAM, A pre- and post-processor for the SEAM statistical energy analsysis software
pp. 641-648(8)
Authors: Ruckman, Christopher E.; Mahoney, Patricia A.; Shang, Paul C.

Predicting the response of rotating machine components using statistical energy analysis
pp. 649-656(8)
Authors: Cuschieri, J.M.; Sun, J.C.

Finite element model updating using laser-based experimental dynamics for noise prediction purposes
pp. 657-666(10)
Authors: Agee, B.L.; Kelly, A.D.; Mitchell, L.D.

Applications of the boundary element method in bioacoustics
pp. 667-674(8)
Authors: Ciskowski, R.D.; Xie, K-J.; Mourad, K.; Royster, L.H.

Predicting appliance noise radiation with a boundary element model
pp. 675-682(8)
Authors: Malosh, James B.; VanBuskirk, Jeff A.; Frank, Alan R.

Noise control using Taguchi experimental design
pp. 683-690(8)
Authors: Hsieh, Hsiao-an; Wittig, Larry E.; Copeland, Jeffrey P.

Improving New Jersey's noise control regulations
pp. 693-698(6)
Author: Clark, Edward M.

An informal account of the early years of the Institute of Noise Control Engineering of the United States of America Inc
pp. 701-754(54)
Author: Lang, William W.