INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Studies on the reference vibration source to be used from the determination of vibromotive force of machinery by the reception plate method
pp. 461-466(6)
Authors: Hiramatsu, T.; Ohkawa, H.; Koyasu, M.; Ishii, K.

Structure borne sound from domestic appliances characterisation of emission and transmission
pp. 467-472(6)
Authors: Heringa, P.H.; Gerretsen, E.; Vercammen, M.L.S.

Power measurement of flexural waves in structures - Intensity in beams
pp. 473-478(6)
Author: Kurtz, Patrick

An equivalent force description of gear-box sources applied in prediction of structural vibration in wind turbines
pp. 479-484(6)
Authors: Ohlrich, M.; Crone, A.

The inter-relation between force and acceleration on simple plate structures: The reception plate method
pp. 485-488(4)
Authors: Gibbs, B.M.; Shen, Y.

Application of the mutual energy theorem for determining unknown forces sources
pp. 489-492(4)
Author: Li, Jinhe

Prediction of structure-borne sound power injected into building structures by resiliently mounted machinery
pp. 493-496(4)
Author: Moorhouse, A.T.

Excitation of sound in structures
pp. 497-502(6)
Author: Heckl, Manfred

Strip mobility
pp. 503-506(4)
Authors: Hammer, Per; Petersson, Bjorn

A method to simplify determination of mobility and source strength data for complex structures
pp. 507-510(4)
Author: Carlsson, Ulf

Development of damping treatments suitable for high temperature environments
pp. 511-514(4)
Authors: Chow, L.C.; Pinnington, R.J.; Lalor, N.

Damping properties of rubber isolation pads
pp. 515-518(4)
Author: Koss, Leonard L.

Structural vibration propagation and isolation of some mechanical testing equipments
pp. 519-522(4)
Authors: Cheah, B.K.; Leong, M.S.

Noise problems on board ships
pp. 523-526(4)
Author: Majumder, Dayal

Screening of buildings from surface waves
pp. 527-530(4)
Author: Haupt, Wolfgang

Effectiveness of screens for reduction of the vibration propagation in ground
pp. 531-534(4)
Authors: Le Houeced, D.; Picard, J.

The attenuation of groundborne vibrations by a) Trench and b) Expandable polystyrene
pp. 535-538(4)
Author: Hood, R.A.

Spectrum modification during ground transportation by a non-linear response of a soil. In situ testing and interpretation by a perturbation method
pp. 539-542(4)
Authors: Heitz, J.F.; Bonnet, G.; Avril, T.

On the prediction of dynamic characteristics of a long sand-filled structure
pp. 543-546(4)
Authors: Shen, R.Y.; Chow, L.C.; Pinnington, R.J.

Transfer impedance of a multi-layer viscoelastic rod
pp. 547-550(4)
Author: Bandera, Wlodzimierz

Notes on radiation impedance
pp. 551-554(4)
Author: Mechel, F.P.

Identification of coupling transfer function between impact vibration parameters and generated noise
pp. 555-558(4)
Authors: Engel, Z.; Golas, A.; Lopacz, H.

Acoustical power flow in structures: A survey
pp. 559-564(6)
Author: Pavic, Goran

Measurement of vibrational sources radiation in beams
pp. 565-568(4)
Author: Carniel, X.

Structural intensity: Forward and backward formulation
pp. 569-574(6)
Authors: Honda, Iwao; Irie, Yoshihiko

Detection of vibration sources in cylinders by structural intensity methods
pp. 575-578(4)
Authors: Meyer, Bruno; Silvestre, Jean-Marie; Thomasson, Denis

Dynamic analysis of nuclear plant circuit by vibrational intensity measurement
pp. 579-582(4)
Authors: Causse, A.; Trolle, J.L.

Localization of sound bridges in a double wall by means of vibrational intensity measurements
pp. 583-586(4)
Authors: Maysenholder, W.; Schneider, W.

Source location with selective intensity method
pp. 587-590(4)
Authors: Zongxi, Fan; Saemann, E-U.; Natke, H.G.

Application of vibrational power measurement to the piping system in an air-conditioner
pp. 591-594(4)
Authors: Sato, K.; Honda, I.

Experiments of structural intensity measurements using the one-transducer frequency response method
pp. 595-600(6)
Authors: Linjama, Jukka; Lahti, Tapio

Gear noise state of the art
pp. 601-606(6)
Author: Houser, Donald R.

Mechanical sources of the noise radiated by gears
pp. 607-610(4)
Authors: Sabot, J.; Bouchareb, A.

Analysis of relation between gear noise and transmission error
pp. 611-614(4)
Authors: Baron, E.; Favre, B.; Mairesse, Ph.

The determination of the optimum profile modification for spur gears when considering manufacturing tolerances and varying loads
pp. 615-618(4)
Authors: Biggert, Peter D.; Houser, Donald R.

The sound of gears generated aerodynamically
pp. 619-622(4)
Authors: Houjoh, Haruo; Umezawa, Kiyohiko

Noise reduction from gearboxes
pp. 623-626(4)
Authors: Ghebache, A.; Lalor, N.

Low noise power transmission gears
pp. 627-630(4)
Author: Rivin, Eugene I.

Causes of varied noisiness of the milling machine main drive
pp. 631-634(4)
Authors: Jedrzejewski, J.; Kwasny, W.

Criteria for gear rattle noise source
pp. 635-638(4)
Authors: Singh, Rajendra; Xie, Hanwen

Experimental modelling of linkage mechanism impact noise
pp. 639-644(6)
Author: Jonckheere, Robert E.

Hydrodynamic noise sources
pp. 645-650(6)
Authors: Leduco, Daniel; Fumoux, Christine; Marquette, Gabriel

Hydraulic noise studies from a centrifugal pump through pressure pulsations measurements in the impeller and experimental modelisation
pp. 651-654(4)
Authors: Tourret, J.; Kamga, M.; Foucher, D.; Kermarec, J.

Pressure field measurements in a voluteless pump
pp. 655-658(4)
Author: Godefroi, B.

Sound radiation from submerged oil hydraulic pumps
pp. 659-662(4)
Authors: Nielsen, Per Lindholdt; Larsen, Peter Nohr

Industrial procedure for determination of the hydroacoustic power of centrifugal pumps by using "anechoic liquid terminator"
pp. 663-666(4)
Authors: Bernard, G.; Badie-Cassagnet, A.; Kermarec, J.; Canavelis, R.

Experimental determination of hydraulic noise of centrifugal pumps
pp. 667-670(4)
Authors: Caignaert, G.; Desmet, B.; Barrand, J.P.; Ouaked, R.; Stevenaert, D.

Characterization of fluid machines as time variant sources of fluid borne noise
pp. 671-674(4)
Author: Boden, Hans

Determination and study of reflexion coefficient of various hydraulic singularities
pp. 675-678(4)
Authors: Bernard, G.; Badie-Cassagnet, A.

Mechanical blanking impact damping
pp. 679-682(4)
Author: Rosendal, Carsten

The noise spectrum of unbalanced excitation
pp. 683-686(4)
Author: Elmer, K-H.

On the noise from percussive drill rods
pp. 687-690(4)
Authors: Lednik, D.; Perkins, N.C.; Sato, K.; Lalor, N.

Noise problems in manufacturing departments in steel works
pp. 691-694(4)
Authors: Sundback, Ulrik; Tingvall, Bror

Noise of industrial handling systems - Case studies
pp. 695-698(4)
Authors: Dekeyrel, Y.; Vercammen, M.; Moulinier, A.; Heringa, P.; Asselineau, M.

Analysis of noise generation of textile yarn twisting machines by sound intensity measurements
pp. 699-702(4)
Author: Maue, Jorgen H.

A study on noise sources of the fly shuttle loom type 1511
pp. 703-706(4)
Author: Yimin, Li

Chainsaw vibrations prediction by computer aided calculation
pp. 707-710(4)
Author: Castelli, Roberto

Noise control technology and application to woodworking band saw machines
pp. 711-714(4)
Author: Limin, Liu

A primary noise source in oxygen cutting
pp. 715-718(4)
Authors: Leth, Siv; Petersson, Bjorn

Waste compactor noise reduction
pp. 719-722(4)
Author: Beards, C.F.

Sound intensity measurements in noise control of a mould plane
pp. 723-726(4)
Authors: Sorainen, E.; Rytkonen, E.

Noise sources in a vacuum cleaner suction unit
pp. 727-730(4)
Authors: Cudina, M.; Sterzaj, M.; Kavcic, J.

Effect of implements on the sound level within the tractors cab
pp. 731-734(4)
Author: Berducat, Michel

An industrial noise levels data base
pp. 735-738(4)
Authors: Pathak, B.; Hone, H.; Robert, J.

A new data bank on machine noise and its abatement
pp. 739-742(4)
Authors: Jacques, J.; Le Ruz, H.

An assessment of domestic appliance noise
pp. 743-746(4)
Authors: Brooks, J.R.; Attenborough, K.

Numerical simulation of acoustic sources in subsonic flow singularities
pp. 747-750(4)
Authors: Esposito, Pascal; Dumond, Annick; Villouvier, Veronique

Study of propagating acoustic sources in a fan intake by modal analysis of tone noise
pp. 751-754(4)
Authors: Lewy, S.; Canard, S.; Kerviel, P.

On the precision of noise generated in confined fluid flows
pp. 755-758(4)
Author: Baldini, Gaetano

Theoretical and experimental studies of the aerodynamic noise in straight circular ducts
pp. 759-762(4)
Authors: He, Zhoulie; Huang, Yongxiang; Guo, Zijie

Sound generation by subsonic cold jets
pp. 763-766(4)
Authors: Musafir, R.E.; Zindeluk, M.

Fan noise - Generation mechanisms and control methods
pp. 767-776(10)
Author: Neise, W.

The use of large eddy simulation - Turbulence models to predict the aerodynamic noise produced by axial flow fans
pp. 777-780(4)
Authors: Base, Terry E.; Charles, Herb; Bloomer, Steve

Estimation of the sound pressure level of turbulent noise radiated from low pressure axial flow fans
pp. 781-784(4)
Authors: Teng, Xiaogang; Nie, Nengguang; Huang, Xiaobing

Control of fan acoustic noise through motor design
pp. 785-788(4)
Author: Pei, Hsien-sheng

An investigation of the noise radiated by centrifugal blowers
pp. 789-792(4)
Author: Yeager, David M.

Excellent low frequency noise due to the rotating stall of centrifugal fan
pp. 793-796(4)
Author: Okada, Ken

Rotating stall noise generated by centrifugal fan and its control
pp. 797-800(4)
Authors: Suzuki, Shoji; Ugai, Yoshio

Active source cancellation of the blade tone fundamental and harmonics in centrifugal fans
pp. 801-804(4)
Authors: Neise, W.; Koopmann, G.H.

A research to the influence of inflow fields on noise of axial flow fans
pp. 805-808(4)
Authors: Wang, Yongqi; Nie, Nengguang

Noise produced by the piston slap in alternative engines
pp. 809-812(4)
Author: Nocilla, Silvio

Study of identifying the sources of diesel engine noise
pp. 813-816(4)
Authors: Zhang, Quennan; Sun, Lianggui

Modelling of noise sources in refrigeration compressors
pp. 817-820(4)
Author: Crueq, J.

The sound sources in a vehicle air conditioning unit
pp. 821-824(4)
Author: Wollherr

Specific noise generation arising from compressors in some air conditioning units
pp. 825-828(4)
Author: Leong, M. Salman

Gas compressor noise
pp. 829-832(4)
Author: Driscoll, Daniel A.

A standard procedure for measurement and reporting of acoustic emissions from wind energy conversion systems
pp. 833-836(4)
Author: Du Bois, T. James

A new standard for wind turbine noise measurements
pp. 837-840(4)
Author: Ljunggren, Sten

Noise reduction of a wind turbine generator
pp. 841-844(4)
Authors: Astrup, Torben; Crone, Anders

Electrical sources of noise
pp. 845-850(6)
Authors: Delcambre, J.; Wood, E.

Air blast circuit breaker noise measurement and criteria
pp. 851-854(4)
Author: Snow, D.J.

Noise reduction of 345 KVA air-blast circuit breakers
pp. 855-858(4)
Authors: Kirschner, Francis; Koch, John; Curreri, John R.

Aeolian tones generated by transmission lines cables
pp. 859-862(4)
Author: Petitjean, A.

Some suggested changes in the standards related to noise and vibration of electrical machines
pp. 863-866(4)
Authors: Timar, P.L.; Hallenius, K-E.

Noise of small motor
pp. 867-870(4)
Authors: Yamada, Shinji; Hagiwara, Sinsaku; Oshima, Norio; Matsubayashi, Katsushi; Ikegaya, Yoshinobu; Kikuaga, Kazukuni; Morinaga, Tadashi; Ilno, Seiji

Electrical apparatus modelling for vibration and acoustic noise analysis
pp. 871-874(4)
Authors: Reyne, G.; Sabonnadiere, J.C.; Foggia, A.

Planning a new power station
pp. 875-878(4)
Author: Segal, Anna

Reduction of electric arc furnace noise in the steel industry
pp. 879-882(4)
Authors: Neugebauer, G.; Haering, H-U.; Mollers, K-H.

Noise control in new electric steelworks
pp. 883-886(4)
Authors: Le Louer, P.; Engler, G.

A method of investigations of acoustic field distribution in the converter steel plant
pp. 887-890(4)
Author: Makomaski, Maciej