INTER-NOISE and NOISE-CON Congress and Conference Proceedings
ISSN 0736-2935 (Print)



The Noise-Con conference proceedings are sponsored by INCE/USA and the Inter-Noise proceedings by I-INCE. NOVEM (Noise and Vibration Emerging Methods) conference proceedings are included. All NoiseCon Proceedings one year or older are free to download. InterNoise proceedings from outside the USA older than 10 years are free to download. Others are free to INCE/USA members and member societies of I-INCE.
Publisher: Institute of Noise Control Engineering on behalf of International Institute of Noise Control Engineering
- Membership Information
- INCE Subject Classification
- Ingenta Connect is not responsible for the content or availability of external websites
Articles
Control of distributed structures
pp. 3-14(12)
Author:
Meirovitch, Leonard
Outdoor sound propagation
pp. 15-26(12)
Author:
Embleton, Tony F.W.
Shipboard noise: Sources, transmission, and control
pp. 27-40(14)
Author:
Junger, Miguel C.
Transfer matrix modeling of geared system vibration
pp. 41-46(6)
Authors:
David, J.W.; Park, No-Gill
Gear dynamic models used in noise analysis
pp. 47-52(6)
Authors:
Ozguven, H. Nevzat; Houser, Donald R.
Influence of gear train dynamics on gear noise
pp. 53-58(6)
Author:
Steyer, Glen C.
Transformer noise: Sources, transmission paths, and control
pp. 59-64(6)
Author:
McKendree, Francis
Generation and transmission of pressure pulsations at the ball valve
pp. 65-70(6)
Authors:
Jungowski, W.M.; Botros, K.K.; Studzinski, W.
Application of internal mode separation techniques to valve noise analysis
pp. 71-76(6)
Authors:
Ward, William C.; Reethof, Gerhard
Extraction of turbulence generated input forces acting on a steam generator tube
pp. 77-82(6)
Authors:
Kendig, R.P.; Frick, T.W.
An analytical parametric study of the broadband noise from axial-flow fans
pp. 83-88(6)
Authors:
Chou, Shau-Tak; George, Albert R.
Measurement of vibration levels on small tubeaxial fans
pp. 89-96(8)
Authors:
Humbad, N.G.; Ernest, J.W.
Small fans used in the cooling of electrical/mechanical equipment
pp. 97-102(6)
Author:
Pei, Hsien-sheng
Fan design for low-noise performance
pp. 103-108(6)
Author:
Wright, Terry
In-duct measurements of turbocharger noise
pp. 109-114(6)
Authors:
Krasson, W.L.; Bolton, J.S.
Noise reduction of diesel engines
pp. 115-120(6)
Author:
Tandara, V.
Turbofan engine core noise source diagnostics
pp. 121-128(8)
Author:
Karchmer, Allen M.
Combustion noise from gas turbine aircraft engines measurement of far-field levels
pp. 129-134(6)
Author:
Krejsa, Eugene A.
Noise reduction of card-index-lifts
pp. 135-140(6)
Author:
Tandara, V.
Noise sources in disk drivesw
pp. 141-146(6)
Authors:
Luttrell, L.F.; Dunens, E.K.
Noise and vibration studies of small winchester disk drives
pp. 147-152(6)
Authors:
Prasad, M.G.; Quinlan, Daniel; Elko, Gary
Breakout noise from lined air conditioning ducts
pp. 153-158(6)
Authors:
Kahn, David W.; Greenberg, David; Essert, Robert
A test system for simultaneous measurement of noise and performance of HVAC type axial fans
pp. 159-164(6)
Authors:
Swim, William B.; Eleftyeriou, Polyvios
Noise analysis of a vacuum cleaner suction unit
pp. 165-170(6)
Authors:
Cudina, M.; Sterzaj, M.; Kavcic, J.
Prospects for low-noise, high-performance chain saws
pp. 171-176(6)
Authors:
Brammer, A.J.; Keith, S.E.
Developing a relationship between power input and sound power output for percussion drills
pp. 177-180(4)
Authors:
Stein, Robert R.; Aljoe, William W.
Coal cutting noise control
pp. 181-188(8)
Authors:
Aljoe, William W.; Bartholomae, Roy C.; Stein, Robert R.
Energy radiation and propagation in the nearfield of a vibrating plate
pp. 189-194(6)
Authors:
Degeorges, J.F.; Tichy, J.
Demonstration of methods for solving combustion "resonance" noise problems
pp. 195-200(6)
Author:
Baade, Peter K.
A turbulent combustion noise model
pp. 201-206(6)
Author:
Mahan, J. Robert
Combustion roar update
pp. 207-214(8)
Authors:
Putnam, Abbott A.; Murphy, Michael J.
Estimation of turbulence effects on sound propagation from low flying aircraft
pp. 215-220(6)
Authors:
Raspet, Richard; Wolf, Richard K.; Bobak, Michael T.
Influence of high-intensity sound on siren efficiency and siren experimental evaluation
pp. 221-226(6)
Authors:
Pla, Frederic G.; Reethof, Gerhard
Energy related applications of high intensity acoustics
pp. 227-232(6)
Author:
Reethof, Gerhard
A study of low-frequency ground vibration in widely differing geographic areas
pp. 233-238(6)
Author:
Gordon, Colin G.
Comparison of atmospheric noise propagation models
pp. 239-244(6)
Authors:
Lamancusa, John S.; Daroux, Pablo A.
Definition and application of atmospheric sound channels for analysis of refractive noise propagation
pp. 245-250(6)
Author:
Thomson, Dennis W.
Regarding the temporal variability of frequency-dependent atmospheric acoustic absorption coefficients
pp. 251-256(6)
Author:
Thomson, Dennis W.
Diffraction of sound by a smooth ridge
pp. 257-262(6)
Authors:
Berthelot, Yves H.; Pierce, Allan D.; Kearns, James A.; Main, Geoffrey L.
Application of precise theory to the prediction of transformer noise propagation
pp. 263-268(6)
Authors:
Nicolas, J.; Champoux, Y.; L'Esperance, A.
Prediction of atmospherically-propagated, temporally-variable noise impact at 100 m to 50 km distances
pp. 269-274(6)
Authors:
Thomson, Dennis W.; Mach, William H.
Low-frequency acoustic propagation in high winds
pp. 275-280(6)
Authors:
Willshire Jr., William L.; Zorumski, William E.
Sound intensity attributed to temperature inversion at night
pp. 281-286(6)
Author:
Ying, S.P.
Noise propagation in the presence of an impedance discontinuity and sound speed gradients
pp. 287-294(8)
Authors:
Berengier, M.; Daigle, G.A.
Application of barrier theory to practical noise control
pp. 295-298(4)
Author:
Marraccini, Leonard C.
An evaluation of theoretically predicted noise reduction versus measured resultant reductions of in-plant topless enclosures
pp. 299-304(6)
Author:
Kinevy, Paul T.
Evaluation of a blast noise suppressor concept
pp. 305-312(8)
Authors:
Kennedy, W.C.; Scarton, H.A.; Van Laak, P.A.; Wallack, P.A.; Chang, C.M.; Wang, D.S.
An actively tuned, passive muffler system for engine silencing
pp. 313-318(6)
Author:
Lamancusa, John S.
A boundary element method for modeling duct, piping and muffler systems
pp. 319-324(6)
Authors:
Seybert, A.F.; Cheng, C.Y.R.
Modelization of porous layered absorbing materials
pp. 325-328(4)
Author:
Allard, Jean P.
A three-load method for noise source charcterization in ducts
pp. 329-334(6)
Authors:
Alves, Heloisa S.; Doige, Allan G.
Random sound fields in ducts
pp. 335-340(6)
Authors:
Soenarko, Benjamin; Seybert, A.F.
Experimental evaluation of active noise control in a thin cylindrical shell
pp. 341-346(6)
Authors:
Abler, Steven B.; Silcox, Richard J.
The cancellation of repetitive noise and vibration by active methods
pp. 347-352(6)
Authors:
Eghtesadi, Kh.; Chaplin, G.B.B.
Active absorption of one dimensional sound field by N-source attenuation arrays
pp. 353-358(6)
Author:
Eghtesadi, Kh.
The active control of enclosed sound fields
pp. 359-364(6)
Authors:
Elliott, S.J.; Nelson, P.A.
A digital sound control system for use in turbulent flows
pp. 365-370(6)
Authors:
Eriksson, L.J.; Allie, M.C.
Mechanisms of active control for noise inside a vibrating cylinder
pp. 371-376(6)
Authors:
Lester, Harold C.; Fuller, Chris R.
Improved active noise cancelling microphone
pp. 377-382(6)
Authors:
Poole, Lynn A.; Warnaka, Glenn E.
A simulation of computer fan noise cancellation using adaptive ARMAX control
pp. 383-388(6)
Author:
Swanson, David C.
Requirements for active and passive noise control in hearing protectors
pp. 389-392(4)
Authors:
Tichy, Jiri; Poole, Lynn A.; Warnaka, Glenn E.
Active noise control at the ear
pp. 393-398(6)
Authors:
Trinder, M.C.J.; Jones, O.
Applications for active noise control
pp. 399-406(8)
Author:
Warnaka, Glenn E.
Distributed sensors and actuators for vibration control in elastic components
pp. 407-412(6)
Author:
Hubbard Jr., J.E.
Active control of sound fields in elastic cylinders by vibrational inputs
pp. 413-418(6)
Authors:
Jones, J.D.; Fuller, C.R.
Active control of nearly self-adjoint distributed structures
pp. 419-424(6)
Authors:
Meirovitch, L.; Norris, M.A.
Active isolation of periodic vibrations
pp. 425-430(6)
Authors:
Nelson, P.A.; Jenkins, M.D.; Elliott, S.J.
Active control of vibration in flexible structures
pp. 431-438(8)
Author:
Sinha, Alok
A pilot study on office noise
pp. 439-444(6)
Authors:
Behar, Alberto; Mallete, Rolland
Sound isolation of Jazzercise studios
pp. 445-450(6)
Author:
Kolano, Richard A.
Effect of screen STC on the speech privacy in open plan offices
pp. 451-456(6)
Author:
Moreland, J.B.
Highway noise prediction by computer
pp. 457-460(4)
Author:
Ewing, Thomas F.
Road traffic noise and sleep disturbance
pp. 461-464(4)
Authors:
Garcia, Amando; Romero, Jose
Highway noise abatement in two forests
pp. 465-470(6)
Authors:
Heisler, G.M.; McDaniel, O.H.; Hodgdon, K.K.; Portelli, J.J.; Gleason, S.B.
Handbook on noise control for petrochemical plants
pp. 471-476(6)
Author:
Nepomuceno, Jose Augusto
Propulsion diesel foundation resonances
pp. 477-482(6)
Author:
Fischer, Raymond W.
Wavevector filtering characteristics of a circular panel
pp. 483-488(6)
Authors:
Hwang, Y.F.; Maidanik, G.
Damping of glass reinforced plastics in marine applications
pp. 489-494(6)
Authors:
Johansson, Bengt; Jackson, Peter
Propagation of transients in complex structures
pp. 495-500(6)
Author:
Lyon, Richard H.
The control of underwater acoustic fields with compliant tube baffles
pp. 501-506(6)
Author:
Moore, James A.
Resonance evaluation of machinery foundation designs
pp. 507-514(8)
Authors:
DeJong, R.G.; Quartararo, L.R.
A time resolved noise dosimeter/minicomputer network utilized to acquire and process data for analysis of complex worker noise exposure relationships
pp. 515-520(6)
Author:
Fields, Kenneth G.
Anoyance of business equipment spectra with predominating pure tones
pp. 521-526(6)
Authors:
Bienvenue, Gordon R.; Weatherly, Laurie; Glass, Susan R.; Celmer, Robert D.
Aircraft noise at the Grand Canyon national park, Arizona, USA
pp. 527-530(4)
Author:
Szecsody, Alex J.
Control and abatement of environmental noise in N.J.
pp. 531-534(4)
Author:
DiPolvere, Edward J.
Statistical noise analysis for community noise
pp. 535-538(4)
Author:
Peppin, Richard J.
Alternative formats for graphical noise contours
pp. 539-544(6)
Author:
Putnam, Robert A.
Acceptability criteria and measurement standards for areas which are reserved for activities requiring low sound levels
pp. 545-550(6)
Author:
Rodman, Charles W.
Transformer noise characterisation using the intensity technique
pp. 551-556(6)
Authors:
Champoux, Yvan; Gosselin, B.
Confinement effect of a sound source on the sound power radiated by a rectangular plate experimental approach using intensity measurements
pp. 557-562(6)
Authors:
Chatel, G.; Frances, A.
Quality indicators for sound power measurements using the intensity technique
pp. 563-566(4)
Authors:
Mann, J. Adin; Tichy, Jiri
Structural intensity: What to measure and How?
pp. 567-572(6)
Author:
Meyer, Bruno
A generalized interference study of acoustic intensity and pressure fields of sources
pp. 573-578(6)
Authors:
Prasad, M.G.; Ham, S.Y.; Kim, W.
Automated sound intensity and power measurement systems
pp. 579-584(6)
Authors:
Suzuki, Hideo; Hori, Kamuki; Murata, Haruhiko; Ono, Takahiko
Experience with indicators for precision of sound power measurements
pp. 585-588(4)
Authors:
Taschuk, E.G.; Tichy, Jiri
Advanced intensity technique for noise source identification
pp. 589-594(6)
Author:
Tichy, J.
Application of sound intensity for a noise reduction project at a petroleum/chemical facility
pp. 595-600(6)
Author:
Wolf, H. Alan
A statistical analysis of the estimation error of sound power measured by the sound intensity technique
pp. 601-604(4)
Authors:
Wu, Mei Q.; Crocker, Malcolm J.
In situ measurement of reflection coefficients using ceptrum analysis
pp. 605-610(6)
Author:
Brown, David L.
Measurement of absorption coefficient and acoustic impedance in a hemi-anechoic space using a transfer function method
pp. 611-616(6)
Author:
Nobile, Matthew A.
Reflection tomography imaging
pp. 617-622(6)
Authors:
Gaumond, Charles F.; Abraham, Phillip B.
Classification of soybeans by impact-force response
pp. 623-628(6)
Authors:
Koerner, B.; Pate, A.L.; Misra, M.; Burger, C.
An examination of filter effects in cylindrical nearfield holography
pp. 629-634(6)
Authors:
Luce, Timothy W.; Hayek, Sabih I.
Nearfield acoustic holography for wideband sources
pp. 635-640(6)
Author:
Maynard, J.D.
Multiple frequency source excitation with nearfield acoustical holography
pp. 641-648(8)
Author:
Strong, William Y.
Measurement techniques and results in broad-band, generalized nearfield acoustical holography
pp. 649-654(6)
Authors:
Washburn, Karl B.; Williams, Earl G.
On the coherence technique for the noise source identification in an air conditioner
pp. 655-660(6)
Authors:
Tang, S.; Jen, M.U.
High speed data acquisition analysis and display on a super microcomputer
pp. 661-666(6)
Authors:
Laville, Frederic; Ladd, Steve
Essentials of predictive maintenance using vibration monitoring
pp. 667-672(6)
Author:
Putnam, Robert A.
Experimental acoustic characterization of cavities with multiple sources
pp. 673-678(6)
Authors:
Christofi, Costas C.; Trethewey, Martin W.
Improving random excitation measurements using large FFT records
pp. 679-684(6)
Authors:
Quartararo, Louis R.; Powell, Robert E.
A method for computing the shape sensitivity of acoustic modal parameters
pp. 685-690(6)
Authors:
Bernhard, R.J.; Milner, J.R.
The use of a finite element code to reduce noise and vibration: Application on a steam turbine outer cover
pp. 691-694(4)
Author:
Meyer, Bruno
Bond graph models of acoustic systems
pp. 695-700(6)
Author:
Busch-Vishniac, Ilene J.
Estimating the vibration level of an L-shaped beam using power flow techniques
pp. 701-706(6)
Authors:
Cuschieri, J.M.; McCollum, M.; Rassineux, J.L.; Gibert, T.
Vibrational power transmission from machines
pp. 707-712(6)
Author:
Pinnington, R.J.
A modal representation for cavity elements and nonuniform pipes in acoustic transmission lines
pp. 713-718(6)
Author:
Eversman, W.
Borish method-of-image prediction of factory sound propagation
pp. 719-724(6)
Authors:
Hodgson, Murray; L'Esperance, A.; Junping, Li
On uniqueness and equivalence of various methods for evaluating the characteristics of an acoustic source
pp. 725-732(8)
Authors:
Munjal, M.L.; Doige, A.G.
Problems with identification of prominent discrete tones
pp. 733-740(8)
Authors:
Wittig, Larry E.; Hellweg Jr., Robert D.
Arterial volume and compliance change in Korotkoff sound generation
pp. 741-746(6)
Authors:
Drzewiecki, G.M.; Melbin, J.; Noordergraaf, A.
Synopsis of auscultation in analysis of respiration
pp. 747-752(6)
Authors:
Lessard, Charles S.; Wong, Wing C.; Jones, Michael L.; Mesibov, Steve
A comparative spectral analysis of muscle sounds
pp. 753-758(6)
Authors:
Rhatigan, B.A.; Mylrea, K.C.; Lonsdale, E.; Stern, L.Z.
Ultrasonic lithotripsy and extracorporeal shock wave lithotripsy
pp. 759-762(4)
Author:
Rohner Jr., Thomas J.
Doppler ultrasonic
pp. 763-768(6)
Author:
Shung, K. Kirk
An interrelation between a lathe cutting tool and its vibration pattern
pp. 769-774(6)
Authors:
Abou El-Seoud, S.A.; Abd El-Aziz, F.F.
- Access Key
- Free content
- Partial Free content
- New content
- Open access content
- Partial Open access content
- Subscribed content
- Partial Subscribed content
- Free trial content