INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Cognitive and aesthetic aspects of noise engineering
pp. 3-14(12)
Author: Blauert, Jens P.

Sound and structural vibration - A review
pp. 15-38(24)
Author: Fahy, Frank

Progress in the application of sound intensity techniques to noise control engineering
pp. 39-74(36)
Author: Maling Jr., George C.

Why aren't they being used?
pp. 77-82(6)
Author: Seebold, James B.

Curriculum "noise abatement" for industrial personnel
pp. 83-88(6)
Author: Gebhard, Dietmar

Lebislative structure and engineering manpower in noise abatement legislation in Australia
pp. 89-94(6)
Author: Eddington, I.W.

The acoustic and vibration laboratories in INMETRO
pp. 95-100(6)
Authors: Hoffmann, Walter E.; Nabuco, Marco A.; Pinto, Jorge D.; Franklin, Tulio P.

Occupational noise legislation in The Netherlands
pp. 101-106(6)
Author: Verwijmeren, M.A.P.

Development of research on acoustics at "Lavi", Rio de Janeiro
pp. 107-110(4)
Authors: Zindeluk, M.; Slama, J.G.; Tenenbaum, R.A.; Musafir, R.E.

Sound exposure without decibels
pp. 111-116(6)
Author: Eldred, Kenneth MdK.

Fluid borne noise generation and transmission in hydraulic piping systems
pp. 119-124(6)
Authors: Leducq, Daniel; Marquette, Gabriel; Fumoux, Christine

Flow characteristics and noise radiation of a valve fitted with micropore plates
pp. 125-130(6)
Authors: Li, Peizi; Huang, Xiaoyang

Fan motors noise reduction
pp. 131-134(4)
Authors: Gerges, Samir N.Y.; Duarte, Marcus A.; da Silva, Rogerio T.

Factors affecting the noise of fan and blower driven cooling systems
pp. 135-140(6)
Author: Kundert, Warren R.

Aeroacoustic study of axial fans with small diameter. Analysis and suppression of instability noise
pp. 141-146(6)
Author: Bridelance, J.P.

Using the INCE fan test procedure to evaluate a large sample of tubeaxial fans
pp. 147-152(6)
Author: Dunens, Egons K.

Optimum low noise cascade solidity of low pressure axial flow fans
pp. 153-156(4)
Authors: Hanjie, Feng; Nengguang, Nie

Comparison of fan noise levels measured on a plenum with noise levels measured in an application
pp. 157-162(6)
Author: Gresho, William M.

Investigation of random and tonal sound power emissions of tubeaxial fans
pp. 163-168(6)
Authors: Jones, N.; Bernhard, R.J.; Baade, P.K.

Discrete-tone sound radiation from axial-flow cooling fans
pp. 169-174(6)
Authors: Lauchle, G.C.; Washburn, K.B.; Fitzgerald, J.M.

The optimum low noise flow-type of low pressure axial flow fans
pp. 175-180(6)
Authors: Xiaogang, Yang; Nengguang, Nie

Noise prediction method for small tubeaxial fans
pp. 181-186(6)
Author: Humbad, N.G.

A study on the rotating stall noise from centrifugal fans
pp. 187-192(6)
Authors: Suzuki, Shoji; Ugai, Yoshio

A real world example of the effect of blower design and air flow management of computer noise emission levels
pp. 193-198(6)
Author: Wilson, E.A.

Experimental investigation in reduction of centrifugal fan noise by use of resonator and theoretical analysis of resonance frequency
pp. 199-204(6)
Authors: Zhu, Zhichi; Li, Yongxi; Fang, Shouxue

Complementary methods for the evaluation of the total acoustical energy emitted by hydraulic systems
pp. 205-210(6)
Authors: Tourret, J.; Bernard, G.

The measurement of pump noise properties and their use in predicting the insertion loss of hydraulic silencers
pp. 211-216(6)
Authors: Whitson, R.J.; Henderson, A.R.

Acoustic power response of engine cylinder-block
pp. 217-222(6)
Authors: Irie, Yoshihiko; Imamura, Nobuhiro; Yammoto, Kiichi

Tire/road noise at low frequencies: plane-wave radiation
pp. 223-228(6)
Author: Nilsson, Nils-Ake

The measurement and reduction of high frequency noise from a display terminal
pp. 229-234(6)
Author: Gaunt, David S.

Refrigerant compressor noise sensitivity testing
pp. 235-240(6)
Authors: Karam, Douglas; Hamilton, James F.

Sound power measurement of an abrasive water jet cutting system
pp. 241-244(4)
Authors: Merchant, Howard C.; Chalupnik, James D.

Sources of discrete tone noise in automobile induction systems
pp. 245-250(6)
Authors: Lamancusa, John S.; Bohenick, John T.

Engine encapsulation in a long-haul truck - Development aspects and limitations
pp. 251-254(4)
Authors: Fingerhut, H.P.; Feitzelmayer, K.

Moto-cross: Noise emission and reduction measures
pp. 255-260(6)
Author: Gerretsen, E.

Control of noise emitted due to rail car vibration
pp. 261-264(4)
Author: Hundal, M.S.

A new underground subway station. Acoustical treatments
pp. 265-268(4)
Author: Westerberg, G.

Cost effective noise reduction on cigarette making machines
pp. 269-274(6)
Authors: Kenton, J.; Mather, J.S.B.

The research and experiment of reducing noise for shuttle loom
pp. 275-280(6)
Author: Xie, Xiangzong

Noise reduction of spinning machines
pp. 281-284(4)
Authors: Janssen, L.; Beckers, M.; Longree, M.

Inexpensive noise control of braiders
pp. 285-288(4)
Authors: Walsh, D.J.; Mather, J.S.B.

Vibration control of the vibrating screen
pp. 289-294(6)
Authors: Sase, Toshitsugu; Suzuki, Shoji

Noise control in printing industry
pp. 295-298(4)
Author: Schuller, Willem M.

Noise reduction in a brick-yard
pp. 299-304(6)
Author: Karsai, Marta

The effects of new technology on noise levels of a mechanical workshop, A case study
pp. 305-308(4)
Authors: Nykanen, Nannu; Saarinen, Karl

A company's drop hammer impact noise criteria and control methodology
pp. 309-314(6)
Author: Sommers, James E.

Noise and noise control in the British rubber industry
pp. 315-320(6)
Author: Bednall, A.W.

Noise-controlled longwall shearer cutting head
pp. 321-326(6)
Authors: Aljoe, William W.; Petitt, Mark R.

Noise of chain conveyors in mining
pp. 327-332(6)
Authors: Burks, J.A.; Peterson, W.J.

Concentric drill steels for noise reduction of percussion drilling
pp. 333-336(4)
Authors: Stein, Robert R.; Aljoe, William W.

Ranking and control of noise sources in a power plant
pp. 337-342(6)
Authors: Caliskan, M.; Ozguven, H.N.

Influence of acoustic environment on sound power radiated by noise source
pp. 345-348(4)
Authors: Zhao, Songling; Seng, Sengwo

The water drop as a structural acoustic source
pp. 349-352(4)
Authors: Jagenas, Arne; Petersson, Bjorn

Acoustic radiation of highway bridges in the range of low frequency sound
pp. 353-358(6)
Authors: Goromaru, H.; Shiraishi, K.; Hara, H.; Komori, T.

Acoustic radiation from plates under the action of disc forces
pp. 359-364(6)
Authors: Keltie, R.F.; Peng, H.

Relationship between stick-slip friction and its acoustic signal
pp. 365-370(6)
Authors: Symmons, G.R.; McNulty, G.J.

On the sound field in a pipe resulting from flow separation
pp. 371-376(6)
Authors: Bull, M.K.; Agarwal, N.K.

Sound propagation over inhomogeneous boundaries
pp. 377-382(6)
Authors: Chandler-Wilde, S.N.; Gover, M.J.C.; Hothersall, D.C.

Acoustic radiation efficiency of partially fixed plates subjected to solidborne sound
pp. 383-388(6)
Authors: Rosenhouse, G.; Keller, Y.

Study on the reflection from sound absorber by impulse method
pp. 389-394(6)
Authors: Tong, Chen; Minhua, Zheng

Determination of the location of a reflection boundary using Hilbert transform
pp. 395-398(4)
Author: Miki, Yasushi

Prediction of enhancement factor for acoustic rays passing through a finely stratified moving atmosphere
pp. 399-402(4)
Authors: Walkden, F.; West, M.

Sound transmission through slits
pp. 403-406(4)
Author: Lindblad, Sven

The effect of the atmospheric refraction on sound propagation over a ground with finite impedance
pp. 407-412(6)
Authors: Hidaka, T.; Masuda, S.

The state of the art in outdoor noise prediction schemes
pp. 413-418(6)
Author: Moerkerken, A.

Application of the fast field program to outdoor sound propagation
pp. 419-424(6)
Authors: Raspet, Richard; Wolf, Richard K.

Sound propagation from rifle shooting ranges
pp. 425-430(6)
Authors: Schreiber, L.J.; Kurze, U.J.

A prediction model for airport ground noise propagation
pp. 431-436(6)
Author: Taylor, R.M.

Influence of meteorological variables on the location of noise sources by ground effect inversion
pp. 437-442(6)
Authors: Attenborough, K.; Heap, N.W.

Sound propagation above grounds
pp. 443-446(4)
Authors: Filippi, P.J.T.; Habault, D.; Gaitan, P.

Influence of ground absorption on barrier attenuation
pp. 447-452(6)
Authors: Hayek, Sabih I.; Grosh, Karl

The acoustic impedance of outdoor grounds, especially at grazing incidence
pp. 453-456(4)
Authors: Mellert, V.; Wempen, J.

A practical method for estimating ground effect of road traffic noise
pp. 457-460(4)
Authors: Yamamoto, Kohei; Yamashita, Mitsuyasu

A stochastic method of evaluating the acoustic character for a room based on an extended orthogonal projection principle under a stationary random excitation and the existence of background noise
pp. 461-466(6)
Authors: Iwashige, Hirofumi; Ohta, Mitsuo; Hatakeyama, Kazutatsu

A microcomputer based expert system for highway noise barrier design
pp. 469-472(4)
Authors: Sedlar, David J.; Harris, Roswell A.; Cohn, Louis F.

Perspectives on the future of traffic noise barriers
pp. 473-478(6)
Authors: Bowlby, William; Cohn, Louis F.

A note on the diffraction by a barrier with finite acoustic impedance
pp. 479-484(6)
Author: Fujiwara, K.

Shielding of shooting noise by earth berms and walls
pp. 485-488(4)
Authors: Kurze, U.J.; Schreiber, L.

Application of the line-integral method for designing a shaped noise barrier
pp. 489-494(6)
Authors: Maekawa, Z.; Osaki, S.

Sound propagation over curved barriers
pp. 495-500(6)
Authors: Pierce, Allan D.; Main, Geoffrey L.; Kearns, James A.; Hsieh, M-A.

Barrier attenuation in the presence of reflecting walls
pp. 501-506(6)
Author: Staiano, Michael A.

Noise control using sound barrier for air cooled chiller
pp. 507-512(6)
Authors: Yoshida, K.; Shindo, T.; Fujita, T.; Kinoshita, M.

Role of the screen on speech privacy in open plan offices
pp. 513-518(6)
Author: Moreland, J.B.

Barrier insertion loss inside industrial halls
pp. 519-524(6)
Authors: Nicolas, Jean; L'Esperance, A.

Acoustical source impedance evaluation by a four load method with applications to muffler design
pp. 525-530(6)
Authors: Prasad, M.G.; York, M.D.

Studies on the effectiveness of aluminum panel absorbers in a pipe
pp. 531-536(6)
Authors: Sridhara, B.S.; Crocker, M.J.; Raju, P.K.

Tuned muffler for industrial motors
pp. 537-540(4)
Authors: Wood, Eric W.; Thornton, Charles C.

Non-linear bahaviour of perforate lined resonator chambers
pp. 541-544(4)
Author: Bento-Coelho, J.L.

The use of model testing in the development of special silencers
pp. 545-548(4)
Authors: Hirschorn, Martin; Collings, David

The effect of cladding supports on the performance of acoustic lagging
pp. 549-552(4)
Author: Byrne, Kerry P.

New Nordic draft standard for calculation of three attenuation parameters for a hearing protector and how to use them in practice
pp. 553-558(6)
Author: Lundin, Rune

Noise exposure during shotblasting and the acoustic properties of air-fed helmets
pp. 559-564(6)
Authors: Price, I.R.; Whitaker, G.

Noise control in buildings using perforated air conditioning ducts
pp. 565-570(6)
Author: Gray, Hopeton George

A method to estimate sound transmission losses in air-duct network including the contribution of reflected-waves from discontinuities
pp. 571-576(6)
Author: Terao, Michihito

Evaluation of active noise attenuation systems
pp. 577-582(6)
Authors: Egtesadi, Kh.; Hong, W.K.W.; Leventhall, H.G.

The implications of causality in active control
pp. 583-588(6)
Authors: Elliot, S.J.; Nelson, P.A.

Design of electric sound cancellation system for air-conditioning ducts
pp. 589-594(6)
Authors: Enokida, T.; Hamada, H.; Miura, T.; Takahashi, M.; Kuribayashi, T.; Asami, K.

Adaptive, active reduction of periodic noise using a frequency domain LMS-algorithm
pp. 595-600(6)
Author: Koers, Peter

On the active absorption of sound
pp. 601-606(6)
Authors: Nelson, P.A.; Curtis, A.R.D.; Elliott, S.J.

Electric sound cancellation in air-conditioning duct system
pp. 607-610(4)
Authors: Takahashi, M.; Kuribayashi, T.; Asami, K.; Hamada, H.; Enokida, T.; Miura, T.