INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Experimental and analytical techniques to separate the non-predominant piston impact noise of a diesel engine
pp. 1141-1146(6)
Authors: Schmillen, K.; Exner, W.; Pischinger, F.

Dynamic testing of elastomer rail support systems
pp. 1147-1150(4)
Authors: Melke, J.; Switaiski, B.

Modal density estimates via the point mobility technique
pp. 1151-1156(6)
Authors: Norton, M.P.; Keswick, P.R.

Measurement for surface acoustic impedance by the pulse method
pp. 1157-1160(4)
Authors: Shibayama, Hideo; Fukunaga, Kazuyasu; Kido, Ken'iti

A microcomputer audio test system
pp. 1161-1166(6)
Authors: Wright, R.D.; Alport, S.

Insertion loss of the air mover test plenum
pp. 1167-1170(4)
Author: Correia, George M.

Modeling approaches for multiple-input, one-output system analysis
pp. 1171-1176(6)
Authors: Mielnicka-Pate, Anna; Bai, Robin M.

A dynamical state estimation method for the stochastic environmental noise system with decibel-valued observation contaminated by a random background noise
pp. 1177-1182(6)
Authors: Hatakeyama, Kazutatsu; Ohta, Mitsuo

Consideration of acoustic accuracy of computer methods
pp. 1183-1186(4)
Author: Holding, J.M.

Diagnostic monitoring of antifriction bearings
pp. 1187-1190(4)
Authors: Ghosh, Malay; Rajamani, A.

Detection of slight defects in ball bearings using the resonant vibration estimated by the two-pulse model
pp. 1191-1196(6)
Authors: Kanai, Hiroshi; Abe, Masato; Kido, Ken'iti

Machine diagnosis and process control by vibration monitoring of a turning lathe
pp. 1197-1200(4)
Authors: Larsen, P.N.; Roed, J.; Bjorno, L.

Diagnostics of machinery vibrations
pp. 1201-1206(6)
Author: Lim, M.K.

Application of sound intensity to detect cover leakages
pp. 1207-1210(4)
Authors: Kaiser, Lutz; Woehrle, Kurt K.

Identifying noise sources in a vacuum cleaner
pp. 1211-1216(6)
Authors: Sagoo, H.S.; Penny, J.E.T.; Booth, R.T.

Noise source identification comparing coherence techniques and direct power estimations
pp. 1217-1222(6)
Authors: Taillifet, D.; Wagstaff, P.R.; Henrio, J.C.

Acoustical holography in spherical coordinates
pp. 1223-1228(6)
Authors: Arnold, Eric B.; Neinreich, Gabriel

Measurement of submerged-plate intensity using nearfield acoustical holography
pp. 1229-1234(6)
Authors: Eschenberg, K.E.; Hayek, S.I.

Acoustic intensity from holography - Introduction
pp. 1235-1240(6)
Author: Maynard, J.D.

Classical signal processing techniques applied to variable impedance identification in impulse testing
pp. 1241-1246(6)
Authors: Tenenbaum, R.A.; Zindeluk, M.

Mapping of structure-borne intensity using nearfield acoustical holography
pp. 1247-1250(4)
Authors: Williams, Earl G.; Darby, Henry D.

Acoustic holography for odd-shaped sources
pp. 1251-1256(6)
Authors: Veronesi, W.A.; Maynard, J.D.

An evaluation method of the peak distribution in the stochastic response of a single wall type insulation system based on the input amplitude distribution
pp. 1257-1262(6)
Authors: Fujita, Y.; Ohta, M.

High accuracy interior noise measurements
pp. 1263-1268(6)
Authors: Geddes, Earl; Blind, Henry

On-line prediction method for the stochastic response of arbitrary sound insulation system based on the stochastic approximation method under a new measure criterion of statistical independence
pp. 1269-1274(6)
Authors: Kato, Yuichi; Ohta, Mitsuo; Hatakeyama, Kazutatsu

A new trial of estimating an Leq evaluation index by use of the statistical information on the noise level fluctuation
pp. 1275-1280(6)
Authors: Mitani, Yasuo; Ohta, Mitsuo

A calculation method of noise propagation over various ground surfaces from random traffic flow
pp. 1281-1286(6)
Author: Watanabe, Yoshinori

Statistical energy analysis at low frequencies applied to sound transmission through buildings
pp. 1287-1290(4)
Author: Craik, R.J.M.

Power flow in non-conservatively coupled structures
pp. 1291-1296(6)
Authors: Lalor, N.; Sun, J.C.; Chow, L.C.

Estimation of wave form of a sound from a specified direction by searching the minimum error
pp. 1297-1300(4)
Authors: Abe, Masato; Nagata, Yoshifumi; Kido, Ken'iti

Scale model simulation of outdoor sound propagation considering a sound speed gradient
pp. 1301-1306(6)
Author: Almgren, M.

Computer aided acoustical scale modelling
pp. 1307-1312(6)
Author: Challis, Louis A.

A special calibratable artificial-head-measurement-system for subjective and objective classification of noise
pp. 1313-1318(6)
Author: Genuit, K.

Towards a proven method for predicting factory sound propagation
pp. 1319-1322(4)
Author: Hodgson, Murray

A review of modelling techniques for noise propagation
pp. 1323-1328(6)
Author: Jones, H.W.

A simplified method of stochastic evaluation for the living noise environment surrounding a road traffic by use of Hankel transformation type characteristic function
pp. 1329-1334(6)
Authors: Miyata, Shigeharu; Ohta, Mistuo

The use of polar correlation in the characterization of multipolar source distributions
pp. 1335-1340(6)
Author: Musafix, Ricardo E.

A new trial to the probabilistic evaluation for the nonstationary environment noise based on the introduction of a mixed type stochastic model
pp. 1341-1346(6)
Authors: Nakasako, Noboru; Ohta, Mitsuo

The maturation of the fast-response noise dosimeter
pp. 1347-1350(4)
Author: Hess, Paul W.

Dosimeter interfacing using the DP-37 interface
pp. 1351-1356(6)
Author: Krug, Robert

Power plant statistical audio dosimetry
pp. 1357-1362(6)
Authors: Teplitzky, Allan M.; Bradley, Wayne E.

Experiences with the ISO 3740's series dealing with sound power measurement codes
pp. 1365-1370(6)
Author: Hubner, Gerhard

Measurements with reference sources in the ISO 3740 series
pp. 1371-1374(4)
Author: Jonasson, Hans G.

Inter-laboratory measurements of sound power levels of three kinds of sound sources
pp. 1375-1378(4)
Authors: Tachibana, H.; Miura, H.; Koyasu, M.

Aviation noise descriptors for federal programs
pp. 1379-1382(4)
Author: Wesler, John E.

A people active approach to the engineering and scientific solutions prescribed by nosie abatement legislation in Australia
pp. 1383-1388(6)
Author: Alroe, P.

Legislative strategy and manpower modelling for noise control in a modern decentralised state
pp. 1389-1394(6)
Authors: Eddington, N.J.; Renew, W.D.

Danish legislation for noise control
pp. 1395-1400(6)
Author: Ingerslev, Fritz

Noise legislation - What goes wrong?
pp. 1401-1404(4)
Author: Leventhall, H.G.

Approach to environmental noise legislation in developing countries
pp. 1405-1408(4)
Authors: McNulty, G.J.; Ghani, Izzuddin

Putting a number to it
pp. 1409-1412(4)
Author: Powell, Walter

Reasonable practicability - Does it hlep or hinder industry
pp. 1413-1418(6)
Authors: Shirley, D.; Mather, J.S.B.

Noise control in Switzerland, legislation and practice
pp. 1419-1424(6)
Author: Teodorescu, Paul

Optimising resources for effective control of motor vehicle noise
pp. 1425-1430(6)
Author: Meagher, David

Shield with cooling media for gas cutting flame
pp. 1433-1438(6)
Author: Agren, A.

Impact matrix printer noise control
pp. 1439-1442(4)
Author: Erbes, Allan

Noise as a social insurance protection in Italy
pp. 1443-1446(4)
Author: Baldacconi, I.

An integrated microphone/loudspeaker unit for active noise cancellation
pp. 1447-1450(4)
Author: Bschorr, O.

Jet plane noise effects on mortality rates
pp. 1451-1454(4)
Authors: Meecham, W.C.; Shaw, N.A.

The necessity of noise reduction to steel forms for precast concrete components
pp. 1455-1460(6)
Authors: Saemann, E-U.; Logemann, M.

Reduction of thruster noise on board offshore support vessels
pp. 1461-1466(6)
Authors: Andresen, K.; Nilsson, A.C.