INTER-NOISE and NOISE-CON Congress and Conference Proceedings
ISSN 0736-2935 (Print)



The Noise-Con conference proceedings are sponsored by INCE/USA and the Inter-Noise proceedings by I-INCE. NOVEM (Noise and Vibration Emerging Methods) conference proceedings are included. All NoiseCon Proceedings one year or older are free to download. InterNoise proceedings from outside the USA older than 10 years are free to download. Others are free to INCE/USA members and member societies of I-INCE.
Publisher: Institute of Noise Control Engineering on behalf of International Institute of Noise Control Engineering
- Membership Information
- INCE Subject Classification
- Ingenta Connect is not responsible for the content or availability of external websites
Articles
Japanese experience in transportation noise control
pp. 5-20(16)
Author:
Igarashi, Juichi
Direct measurement of sound intensity and practical applications in noise control engineering
pp. 21-38(18)
Author:
Crocker, Malcolm J.
The evolution of noise control education as a consequence of the 1970's
pp. 39-44(6)
Authors:
Bernhard, Robert J.; Cohen, Raymond
Computerized identification of gear noise related to conjugate errors and nicks
pp. 45-48(4)
Authors:
Shmuter, S.; Nivi, H.
Noise control of valves supplying fuel gas to boilers
pp. 49-52(4)
Author:
Cindric, D.T.
Aerodynamic and noise characteristics of laminar flow fans
pp. 53-56(4)
Authors:
Merry, S.L.; Glegg, S.A.L.
Using a modal analyzer to reduce the electromagnetic noise of a fan-shaft-rotor system
pp. 57-60(4)
Author:
Higuchi, S.
Some remarks concerning the operation condition of electrical motors at the determination of sound power
pp. 61-64(4)
Author:
Timar, P.L.
Vibration and noise characteristics of positive displacement pumps
pp. 65-68(4)
Author:
Dunlop, R.W.
Reducing the primary noise originating from a crankcase-scavenged two-stroke engine
pp. 69-72(4)
Author:
Kania, Norbert
Vibration suppression of main bearing bulkheads and caps in engine noise reduction
pp. 73-76(4)
Authors:
Ogawa, Naoki; Hayashi, Yoshimasa; Hayakawa, Yoshikazu; Kubozuka, Takao
Development of a transient response model for tire/pavement interaction
pp. 77-82(6)
Author:
Eberhardt, Allen C.
Vehicle overall noise - Rolling noise
pp. 83-86(4)
Authors:
Martin, J.; Lucquiaud, R.
Experimental evaluation of theoretical tire/road noise models
pp. 87-92(6)
Author:
Plotkin, Kennith J.
Three basic methods for measurement of tire/road noise
pp. 93-98(6)
Authors:
Sandberg, Ulf; Ejsmont, Jerzy A.
New design of a long distance public alert system
pp. 99-102(4)
Author:
Pedersen, Torben Holm
Prediction of vibration and noise levels in high-speed mechanical systems
pp. 103-108(6)
Author:
Akay, Adnan
Storage tank assembly noise reduction - End cap noise
pp. 109-114(6)
Authors:
Joachim, C.; Koss, L.L.
The identification and systematic elimination of sources of noise from an experimental drop hammer model
pp. 115-120(6)
Author:
Richards, E.J.
Heat exchanger coupled cavity resonances
pp. 121-124(4)
Author:
Nagayasu, K.
Noise reduction of a fin tube type heat exchanger
pp. 125-130(6)
Authors:
Suzuki, Shoji; Maruta, Yoshiyuki; Ugai, Yoshio
A new approach to primary noise reduction on machinery demonstrated on machine tools
pp. 131-134(4)
Author:
Kloecker, Max
Study on noise control of air tools
pp. 135-138(4)
Authors:
Maeda, S.; Kume, Y.; Hashimoto, F.; Inoue, M.
Noise from stone sawing machines
pp. 139-142(4)
Authors:
Matsuhisa, Hiroshi; Sato, Susumu
Sources of noise in professional chain saws
pp. 143-146(4)
Authors:
Keith, S.E.; Brammer, A.J.
Application of a coulomb-friction damper to a paper-box chisel
pp. 147-152(6)
Authors:
Wallack, P.A.; Kennedy, W.C.; Scarton, H.A.
Noise reduction experiments on a scale model of a 200 tonne power press
pp. 153-156(4)
Authors:
Stimpson, G.; Richards, E.J.
Noise reduction nacelles for 707 and DC-8 airplanes
pp. 157-160(4)
Authors:
Marsh, Alan H.; Chana, William P.
The measurement of the noise source distribution of wind turbines and vehicles with a high resolution acoustic antenna
pp. 161-164(4)
Authors:
Boone, M.M.; van Overbeek, H.
Vehicle noise and the influence of the exhaust gas conduct
pp. 165-168(4)
Author:
Tandara, V.
Exterior noise reduction of a light vehicle
pp. 169-172(4)
Authors:
Noba, Mikio; Fujii, Yuichi
On factors affecting truck noise emission
pp. 173-176(4)
Authors:
Saha, Pranab; Baker, Robert N.; Groening, James A.; Hemdal, John F.
On the relative importance of aerodynamic and wheel/rail noise sources generated by railway trains
pp. 177-180(4)
Authors:
Pfizenmaier, D.; King III, W.F.
Experients in bulldozer retrofit noise control
pp. 181-184(4)
Author:
Marraccini, Leonard C.
Rotary lobe blower noise control guidelines
pp. 185-190(6)
Author:
Bobeczko, Michael S.
Noise of pneumatic tools: A status report
pp. 191-194(4)
Author:
Duble, Albert G.
Review of press noise control
pp. 195-200(6)
Author:
Koss, L.L.
Noise control for new equipment - An engineer's dilemna
pp. 201-206(6)
Author:
Roth, Stephen I.
Aluminum extrusion sawing noise reduction
pp. 207-212(6)
Author:
Stewart, John S.
Fastener industry noise control research program
pp. 213-218(6)
Author:
Toothman, Edwin H.
Noise control of swaging machines
pp. 219-222(4)
Authors:
Zindeluk, Moyses; Slama, Jules G.; Tenebaum, Roberto A.
Noise control technology for the mining industry
pp. 223-226(4)
Author:
Giardino, Dennis A.
Reduction of noise radiation from drill steels, An experimental investigation
pp. 227-230(4)
Author:
Ogren, Jan-Erik
Noise emissions from powerplant coal and ash handling equipment
pp. 231-234(4)
Authors:
Stern, Bradford M.; Christoforo, Maurice P.; Liebich, Richard E.
Sound power and radiation efficiency of sources in gas-reducing stations
pp. 235-240(6)
Authors:
Engel, Zbigniew; Panuszka, Ryszard
Analysis of sound generated by vibrating bodies
pp. 241-244(4)
Authors:
Cossalter, Vittore; Doria, Alberto
Studies on acoustical fields of vibrating structures for source noise control applications
pp. 245-248(4)
Authors:
Prasad, M.G.; Jiang, J.K.
Sound radiation from impact excited structures with application to a printer mechanism
pp. 249-252(4)
Author:
Tournoy, D.
Noise generated by two parallel air jets
pp. 253-256(4)
Authors:
Larsen, Peter N.; Bjorno, Leif
Quadrupole correlations and jet noise
pp. 257-260(4)
Authors:
Musafir, Ricardo E.; Slama, Jules G.; Zindeluk, Moyses
The mechanism of pipe-flow noise generation due to internal flow separation
pp. 261-264(4)
Authors:
Bull, M.K.; Agarwal, N.K.
A new method to calculate sound power levels in gas containing pipes for medium and high velocities of flow
pp. 265-268(4)
Author:
Petermann, Jochen
Sound transmission through cylindrical shells
pp. 269-272(4)
Author:
Fuller, Christopher R.
An examination of measurement method for long distance noise propagation
pp. 273-276(4)
Authors:
Nomachi, K.; Yamamoto, I.
Noise attenuation by models of vegetation
pp. 277-280(4)
Authors:
Watanabe, Toshio; Yamada, Shinji
Outdoor sound propagation at grazing incidence: Dependence on ground impedance and turbulence distribution
pp. 281-284(4)
Authors:
Wilken, W.; Wempen, J.
Difference between the effect of wind on sound propagation from a point source and from a line source
pp. 285-290(6)
Authors:
Yoshihisa, K.; Tachibana, H.
Improved low frequency noise control with a "phase reversal noise barrier" on a large impedance ground
pp. 291-294(4)
Authors:
Amram, Maurice; Droin, Laurent
Two-parameter impedance models for predicting ground effects
pp. 295-300(6)
Author:
Attenborough, Keith
Insertion loss degradation for parallel traffic noise barriers
pp. 301-306(6)
Authors:
Bowlby, William; Cohn, Louis F.
Diffraction by rigid wedge barriers: An efficient method for obtaining exact results
pp. 307-312(6)
Author:
Hadden Jr, W. James
Acoustic diffraction by absorbent wedge-shaped barriers
pp. 313-318(6)
Author:
Hayek, Sabih I.
Parallel barriers in the presence of ground surfaces
pp. 319-324(6)
Authors:
Hutchins, D.A.; Jones, H.W.
Shielding of traffic noise by the shoulder of elevated highways
pp. 325-330(6)
Author:
Kurze, U.J.
A design method for a semi-transparent noise barrier
pp. 331-334(4)
Authors:
Maekawa, Z.; Ohsaki, S.
In-plant noise control with acoustical barriers
pp. 335-340(6)
Author:
Moreland, J.B.
Noise propagation over an inhomogeneous impedance surface
pp. 341-346(6)
Authors:
Klein, C.; Mynoke, H.; Cops, A.
Precise analysis of barrier performance in the presence of ground
pp. 347-350(4)
Author:
Nicolas, J.
Traffic nosie attenuation due to single and parallel barriers
pp. 351-354(4)
Authors:
Balachandran, C.G.; Patching, R.G.; Andrew, C.
Screeening of ground run-up noise
pp. 355-358(4)
Authors:
Schuller, Willem M.; van der Ploeg, Fokke D.
Reduction of low-frequency sound from impulsive noise sources at construction sites by barrier walls
pp. 359-362(4)
Authors:
Nishigaya, T.; Mitani, T.; Fukuhara, H.; Koyasu, M.
Acoustic scattering by double thin highway noise barriers
pp. 363-368(6)
Authors:
Varadan, V.K.; Varadan, V.V.; Hayek, S.I.
Effects of an enclosure system in dry milling operations
pp. 369-372(4)
Author:
Kinevy, Paul T.
Development of an acoustical enclosure for diesel generators aboard ASW ships
pp. 373-376(4)
Authors:
Kryger, Ronald W.; Schiff, Morton I.
The application of a modified room acoustic equation for the prediction of insertion loss of a close-fitting acoustic enclosure
pp. 377-380(4)
Authors:
Mhango, A.J.; Petrie, A.M.
Shape optimization of reactive mufflers by the finite element method
pp. 381-384(4)
Authors:
Bernhard, Robert J.; Kipp, Carl R.
Control of stack noise emission using a negative backpressure resonant-style muffler suitable for contaminated air flows
pp. 385-388(4)
Author:
Gmerek, Mark M.
Reactive mufflers for large fans with contaminated air flows
pp. 389-392(4)
Author:
Norris, Thomas R.
A modeling of nonlinear wave propagation in engine exhaust systems
pp. 393-396(4)
Authors:
Takagi, Shirgeru; Nakamura, Tadao; Irie, Yoshihiko
Acoustic behavior of sound absorptive panel suspended in a diffuse field
pp. 397-400(4)
Authors:
Zhao, Songling; Sheng, Shengwo
Absorption coefficients for spatially separated acoustic panels
pp. 401-404(4)
Author:
Lilly, Jerry G.
Flexible-blanket noise control insulation field test results and evaluation
pp. 405-408(4)
Authors:
Thornton, Charles C.; Lehman, Charles B.; Wood, Eric W.
Absorpton measurements on anechoic room wedges
pp. 409-414(6)
Authors:
Wise, Russell D.; Nobile, Matthew A.
Wide-band sound absorber based on microperforated panels
pp. 415-420(6)
Author:
Maa, Dah-You
Acoustic performance of a porous metal sound absorber with resonator
pp. 421-424(4)
Authors:
Okano, Katsuo; Yoshihara, Terumi; Ugai, Yoshio; Suzuki, Shoji
Prediction of the performance of acoustic lagging
pp. 425-428(4)
Author:
Byrne, K.P.
Techniques for efficient measurement of flow duct element acoustic characteristics
pp. 429-432(4)
Author:
Bento Coelho, J.L
The effect of grazing flow on sound attenuation in a flow duct
pp. 433-436(4)
Authors:
Amano, K.; Shibata, K.; Otaki, H.
The use of sand materials for industrial noise control
pp. 437-442(6)
Authors:
Richards, E.J.; Sun, J.C.; Sun, H.B.; Chow, L.C.
Recursive filtering of an acoustic wave in a turbulent flow and active absorption in ducts
pp. 443-446(4)
Authors:
Bouc, R.; Nayroles, B.; Aghfir, M.
Economics of active attenuation of noise in ducts
pp. 447-452(6)
Authors:
Eghtesadi, Kh.; Hong, W.K.W.; Leventhall, H.G.
Application of active noise absorption to infrasonics
pp. 453-456(4)
Author:
Gan, W.S.
Active systems in room acoustics - Solved and unsolved problems
pp. 457-462(6)
Authors:
Guicking, D.; Rollwage, M.
Suppression of acoustic noise by computer generated sound
pp. 463-468(6)
Authors:
Kido, Ken'iti; Abe, Masato; Morikawa, Seiitiro
Active suppression in noise in microphone line using vibration of noise source
pp. 469-472(4)
Authors:
Kim, Chun Duck; Morikawa, Seiitiro; Abe, Masato; Kido, Ken'iti
Active noise reduction of low frequency noise in a pipe
pp. 473-476(4)
Authors:
Kosaka, Toshifumi; Ishizawa, Minoru; Miyano, Hiroshi; Yamada, Shinji
Vibration control
pp. 477-482(6)
Authors:
Meirovitch, Leonard; Norris, Mark A.
Reduction of diesel engine noise inside passenger compartments using active, adaptive noise control
pp. 483-488(6)
Author:
Oswald, Lawrence J.
The wavy wall concept and active noise control in ducts
pp. 489-492(4)
Author:
Richarz, W.G.
Autoadaptative broadband active absorption in ducts by the means of transversal filtering
pp. 493-496(4)
Authors:
Roure, A.; Nayroles, B.
- Access Key
- Free content
- Partial Free content
- New content
- Open access content
- Partial Open access content
- Subscribed content
- Partial Subscribed content
- Free trial content