INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Effects of vibration on humans
pp. 1-14(14)
Author: Griffin, Michael J.

Acoustic consultancy
pp. 15-20(6)
Author: Ingemansson, N.S.P.

The acoustical design of concert halls
pp. 21-30(10)
Author: Marshall, A. Harold

Awareness of noise control
pp. 33-36(4)
Author: Verhas, H.P.

Noise measurement - International standardization
pp. 37-40(4)
Author: Ingerslev, Fritz

Isn't society now overplaying the aircraft noise issue?
pp. 41-44(4)
Author: Smith, M.J.T.

Occupational noise control in Denmark
pp. 45-48(4)
Authors: Lykkeberg, Peder; Reister, Else

Computer graphics for noise and air modeling
pp. 49-52(4)
Authors: Cohn, L.F.; Bowlby, W.

Noise control in Latin America
pp. 53-56(4)
Author: Fuchs, G.L.

The control of airport noise in the United States: An overview
pp. 57-62(6)
Author: Bragdon, G.R.

On two types of low frequency noises from boiler systems
pp. 63-66(4)
Authors: Nishiwaki, Niichi; Mori, Takuji; Fujio, Noboru

The use of a scale model to investigate the noise sources on a 200 tonne power press
pp. 67-70(4)
Authors: Stimpson, G.; Borello, G.

Acoustic intensity measurements on a 350 kN automatic punch press
pp. 71-74(4)
Authors: Coleman, Ronald B.; Hodgson, Thomas H.

Infrasound in partial discharge from axial fans and its control
pp. 75-78(4)
Authors: Suzuki, S.; Ugai, Y.

An improved method for calculating neighborhood noise from open-air industrial installations
pp. 79-82(4)
Author: Marsh, K.J.

Measuring techniques and calculation methods for the control of industrial noise
pp. 83-86(4)
Author: Nierop Azn, C.A.

Testing the joint Nordic system for prediction and measurement of environmental noise from industry
pp. 87-90(4)
Author: Jakobsen, Jorgen

Noise reduction on punch presses by manipulating the force-displacement curve
pp. 91-94(4)
Author: Seidel, H-J.

Waste-incineration power plant: Noise aspects and prediction
pp. 95-98(4)
Author: Teodorescu, Paul

The noise emission of forging presses
pp. 99-102(4)
Author: Wischmann, G.

Power plant coal conversion noise analysis
pp. 103-106(4)
Author: Teplitzky, Alan M.

On the control of noise emission from handheld impact drills
pp. 107-110(4)
Author: Asztely, J.

Prediction of sound power level and sound pressure level radiated by computer frames
pp. 111-114(4)
Authors: Maling, George C.; Clark, Mark G.

The performance of low noise laminar flow fans
pp. 115-118(4)
Authors: Merry, S.L.; Glegg, S.A.L.; Herbert, A.G.

Case: Installation of mechanical shops in an office-building
pp. 119-122(4)
Author: Ekstrom, Roger

Aeroacoustic characteristics of a large, variable-pitch, variable-speed fan system
pp. 123-126(4)
Authors: Soderman, P.T.; Mort, K.W.

Noise control of concrete element production by design
pp. 127-130(4)
Authors: Holmberg, Lars; Soderqvist, S.

Sound power characteristics of industrial machinery
pp. 131-134(4)
Authors: Eun, H.J.; Lee, W.M.; Kim, Y.S.

A low noise nail machine
pp. 135-138(4)
Authors: Nielsen, Ove; Lykkeberg, Peder

Noise control of industrial jets: An investigation of nozzle performance
pp. 139-142(4)
Authors: Li, Peizi; Halliwell, N.A.

A study of the noise reduction protential of milling cutters employing non-uniform insert pitch
pp. 143-146(4)
Authors: Moore, T.N.; Reif, Z.F.

Stone cutting saw noise: Control using the water supply
pp. 147-150(4)
Authors: Shaw, S.; Halliwell, N.A.

Noise reduction on abrasive cut-off machines in the iron and steel industry
pp. 151-154(4)
Author: Fritz, A. Herbert

Comparison of methods for the determination of guaranteed sound power levels of machinery
pp. 155-158(4)
Author: Augusztinovicz, F.

New housing for reduction of noise from large industrial gearboxes
pp. 159-162(4)
Author: Nilsson, Siv

Aerodynamic noise eliminator of the pneumatic tools
pp. 163-166(4)
Authors: Stojanowski, Wiktor J.; Troszok, Adam; Niewczas, Bogdan M.

Low frequency airborne noise in the vicinity of railroad tracks
pp. 167-170(4)
Author: Volberg, G.

Damping of railway brake squeal
pp. 171-174(4)
Author: Jakobsen, Jorgen

Measurements of propeller-driven aircraft noise
pp. 175-180(6)
Author: Chyla, A.

Propeller near-field and noise radiation to the far-field
pp. 181-184(4)
Authors: Kallergis, M.; Neubauer, R.F.

Comparison of the noise emission of six different tramcar types in three different cities
pp. 185-188(4)
Author: Riemens, Siegfried

Noise control in refuse disposal
pp. 189-192(4)
Author: Irmer, V.

Noise reduction of air-cooled diesel engine F 6L 413 V
pp. 193-196(4)
Author: Tandara, V.

Diesel engine sump noise
pp. 197-200(4)
Author: Beards, C.F.

Silencing of exhaust engine noise
pp. 201-204(4)
Authors: Ferrari, G.; Castelli, R.

Comparison among sound power levels of passenger cars with various types of tires
pp. 205-208(4)
Authors: Suzuki, Y.; Saito, F.; Kumagai, M.; Sone, T.

Experiences with low-noise vehicles with diesel engines
pp. 209-212(4)
Author: Kemper, Gert

Further time domain analysis of exhaust pressure pulses from a small rotary engine
pp. 213-216(4)
Authors: Gaspar, R.G.S.; Reif, Z.F.; Sridhar, K.

Reduction of noise from a 125 cc moto-cross motorcycle
pp. 217-220(4)
Author: Astrup, Torben

Acoustic agglomeration of power plant fly ash
pp. 221-226(6)
Author: Reethof, G.

A study of air expulsion noise from a forging hammer
pp. 227-230(4)
Author: Malosh, J.B.

Noise generated by air jets from rectangular slits
pp. 231-234(4)
Authors: Larsen, Peter N.; Bjorno, Leif

An analysis of combustion noise in engines
pp. 235-238(4)
Authors: Kojima, N.; Fukuda, M.

Infrasound generated by human body
pp. 239-242(4)
Authors: Okai, O.; Taki, M.; Saito, M.; Nishiwaki, N.; Mori, T.; Fujio, N.

Reflected wave influence on low-frequency sound measurement
pp. 243-246(4)
Authors: Fukuhara, H.; Ohkuma, T.; Okuda, M.

Long range propagation of airport ground noise
pp. 247-250(4)
Authors: Walker, J.G.; Flindell, I.H.

An improved method of predicting the reflection of road traffic noise by buildings
pp. 251-254(4)
Authors: Hothersall, D.C.; Simpson, S.

Noise propagation over ground - A new solution applied to noise barrier diffraction
pp. 255-258(4)
Authors: Nobile, Matthew A.; Hayek, Sabih I.

Degradation of various types of shadow regions due to typical atmospheric turbulence
pp. 259-262(4)
Author: Daigle, G.A.

Wave propagation above layered media
pp. 263-266(4)
Author: Filippi, Paul J.T.

The effect of turbulence on barrier performance
pp. 267-270(4)
Authors: Lawrence, R.; Burrows, G.W.

Sound propagation over ground with a barrier - Some meteolological effects
pp. 271-274(4)
Authors: Larsson, Conny; Hallberg, Bengt

Influence of weather conditions and ground absorption on the transmission of traffic noise
pp. 275-278(4)
Authors: Delanne, Y.; Peybernard, J.; Ramery, M.

An attempt to predict the propagation of sound levels from blasting operations
pp. 279-282(4)
Authors: Saunders, D.J.; Waites, C.

The effects of wind and temperature conditions on outdoor sound propagation (scale model experiment)
pp. 283-286(4)
Authors: Tachibana, H.; Yoshihisa, K.

Prediction and experimental verification of far-field sound propagation over varying ground surfaces
pp. 287-290(4)
Authors: Bassiouni, M.R.; Minassian, C.R.; Chang, B.

Assessment of noise from primary blasting in quarries
pp. 291-296(6)
Author: Slyper, H.A.

Sound attenuation by a vegetal screen experimental models
pp. 297-300(4)
Author: Dziedzic, A.

Ground effect in outdoor noise propagation
pp. 301-306(6)
Author: Attenborough, Keith

Acoustic scattering by highway noise barriers
pp. 307-310(4)
Authors: Varadan, V.K.; Varadan, V.V.; Tsao, S.J.; Hayek, S.I.

Diffraction by an absorbing barrier or by an impedance transition
pp. 311-314(4)
Author: Koers, Peter

The prediction of noise attenuation by finite barriers
pp. 315-318(4)
Authors: McNulty, G.J.; Sim, S.K.; Allen-Booth, D.

Scale model studies of highway noise barrier insertion losses
pp. 319-322(4)
Authors: Hutchins, D.A.; Jones, H.W.; Russell, L.T.

Noise reduction and sound radiation efficiency of the enclosure for different attachment conditions by airborne noise
pp. 323-326(4)
Authors: Yasuda, Hiroyuki; Matsui, Masayuki; Oh, Jae Ung; Takagi, Haoki

Analysis of methods of predicting sound pressures in enclosed spaces
pp. 327-330(4)
Authors: Thompson, J.K.; Zagar, L.E.

Measurement of the sound insulation of small enclosures
pp. 331-334(4)
Author: Jonasson, Hans G.

The performance of acoustic enclosures
pp. 335-338(4)
Authors: Hillarby, S.N.; Shen, Y.; Oldham, D.J.

Propagataion of a pulsive flow with finite amplitude in a straight pipe
pp. 339-342(4)
Authors: Okda, Josuke; Okumura, Yoshihide

Determination of the acoustical impedance of complex geometry slots used in automotive exhaust system by means of a measurement procedure in a tube
pp. 343-346(4)
Authors: Franco, L.; Guglielmone, C.

Absorptive silencers for contaminated air
pp. 347-350(4)
Author: Kurze, U.J.

The bar silencer - Improving attenuation by constricted two-dimensional wave propagation
pp. 351-354(4)
Authors: Nilsson, Nils-Ake; Soderqvist, Stig

Sound absorption properties of a perforated plate and membrane ceiling element
pp. 355-358(4)
Authors: Nilsson, Anders C.; Rasmussen, Birgit

Diagon absorbers - Effective low and high frequency absorbers
pp. 359-362(4)
Authors: Karfalk, Goran; Hellstrom, PerAnders

Direct and accurate impedance measurement of microperforated panel
pp. 363-366(4)
Author: Maa, Dah-You

Acoustical applications for perforated metal: Noise control with sound-absorptive treatments using perforated metals
pp. 367-370(4)
Authors: Schultz, Theodore J.; Plank, Lee

Recognizing and designing for the acoustic problems of office machinery
pp. 371-374(4)
Author: Potter, R.C.

The selective anti-noise ear defender
pp. 375-378(4)
Authors: Jones, O.; Smith, R.A.

Considerations regarding the laboratory measurement of hearing protector attenuation
pp. 379-382(4)
Author: Berger, E.H.

Nordic round robin test on hearing protectors
pp. 383-386(4)
Author: Poulsen, Torben

A new facility for testing ducted sound attenuators under the influence of flow
pp. 387-390(4)
Authors: Mechel, F.P.; Fuchs, H.V.; Purshouse, M.

Compensation of pressure and volume impulses in fluids by means of compensating cushions
pp. 391-394(4)
Author: Mantel, Juval

Measurements of transfer matrices of duct elements and source impedance, using the pair-microphones techniques
pp. 395-398(4)
Authors: Nishimura, M.; Fukatsu, S.; Akamatsu, K.

Waveform synthesis - The Essex solution to repetitive noise and vibration
pp. 399-402(4)
Authors: Chaplin, G.B.B.; Smith, R.A.

The implications of synchronised cancillation for vibration
pp. 403-406(4)
Authors: Smith, R.A.; Chaplin, G.B.B.

A comparison of some Essex algorithms for major industrial applications
pp. 407-410(4)
Authors: Smith, R.A.; Chaplin, G.B.B.

Active noise reduction as an experimental application of the general system theory
pp. 411-414(4)
Author: Jessel, Maurice J.M.

Active control of noise in interior spaces
pp. 415-418(4)
Authors: Warnaka, Glenn E.; Tichy, Jiri; Zalas, John M.; Poole, Lynn A.

Active control of the acoustic reflection coefficient at low frequencies
pp. 419-422(4)
Authors: Guicking, D.; Karcher, K.; Rollwage, M.

Cancellation of signal picked up in a room by estimated signal
pp. 423-426(4)
Authors: Kim, C.; Abe, M.; Kido, K.

An experiment of active noise attenuation in three-dimensional space
pp. 427-430(4)
Authors: Mazzanti, Silvio; Piranx, Joel