INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Control of sources for active sound propagation in a duct
pp. 431-434(4)
Authors: Martin, V.; Roure, A.

Effect of evanescent waves on the active attenuation of sound in ducts
pp. 435-438(4)
Authors: Tichy, Jiri; Warnaka, Glenn E.

The tight-coupled monopole (TCM) and tandem (TCT) attenuators in a duct
pp. 439-442(4)
Authors: Hong, W.K.W.; Eghtesadi, Kh.; Leventhall, H.G.

Spectral conditions for the active cancellation of broadband noise
pp. 443-446(4)
Authors: Leitch, R.R.; Alvarez, A.; Yang, S.J.

The acoustical virtual earth and its application to ducts with reflecting terminations
pp. 447-450(4)
Authors: Trinder, M.C.J.; Nelson, P.A.

The active control of internal combustion engine exhaust noise
pp. 451-456(6)
Author: Croker, M.D.

Active noise cancellation of low frequency sound inside vehicle cabs
pp. 457-460(4)
Author: Berge, T.

Synchronous adaptive cancellation in vehicle cabins
pp. 461-466(6)
Authors: Nadim, M.; Smith, R.A.

Transient in-situ statistical energy analysis methods for structural vibration prediction
pp. 467-470(4)
Authors: Ranky, M.F.; Clarkson, B.L.

The response of a large plate to point excitation and the measurement of its energy levels
pp. 471-474(4)
Author: Lee, Siew-Eang

Use of forced response measurements for the estimation of machine source properties
pp. 475-478(4)
Authors: Kinns, R.; McColl, J.H.; McKinstry, J.

Vibrations in the Milan underground - Types of tracks and train speeds
pp. 479-482(4)
Author: Capponi, G.F.

Vibration as a parameter in the design of microelectronic facilities
pp. 483-486(4)
Authors: Gordon, Colin G.; Ungar, Eric E.

Vibration criteria for microelectronics manufacturing equipment
pp. 487-490(4)
Authors: Ungar, Eric E.; Gordon, Colin G.

Torsional vibration measurement and gear transmission error
pp. 491-494(4)
Authors: Maeda, T.; Maehara, O.; Ono, T.; Harada, T.

Investigation and prediction of noise and vibration of pneumatic impact mechanisms
pp. 495-498(4)
Authors: Shemyakin, Eu.T.; Benevolenskaya, N.P.; Shoherbakov, V.A.

Damping out punch press noise
pp. 499-502(4)
Author: Stimpson, G.

Active force cancellation of structure vibrations
pp. 503-506(4)
Author: Cuschieri, J.

Estimation of radiated noise using structural response methods
pp. 507-510(4)
Author: Cuschieri, J.

Summary of a Nordic co-operative project: Structure borne sound in ships from diesel engines
pp. 511-514(4)
Author: Plunt, Juha

Structure-borne sound and noise level at a drop hammer's model
pp. 515-518(4)
Author: Kloth, J.

Experiences in the use of electric impact exciters for ship trials
pp. 519-522(4)
Author: Kinns, R.

Problems concerning the contruction of an effective vibration isolating glove
pp. 523-526(4)
Author: Voss, Palle

Influence of seat cushions on vibration in earth moving vehicles
pp. 527-532(6)
Authors: Hilyard, N.C.; Collier, P.; Douglas, D.; McNulty, G.J.

Application of mechanical impedance methods to seat transmissibility
pp. 533-536(4)
Authors: Fairley, Thomas E.; Griffin, Michaeil J.

Vibrational power transmission measurements on a semi-practical motor-isolator-seating arrangement
pp. 537-540(4)
Author: Pinnington, P.J.

Considerations in applying damping coating material properties determined from beam tests to the control of plate vibration problems
pp. 541-544(4)
Authors: Dunn, S.E.; Stevens, K.K.; Uhlar, D.A.

Otpimum thickness distribution of damping layers for square plates
pp. 545-548(4)
Authors: Stevens, K.K.; Yildiz, A.

Damping of square plates with constrained-layer damping treatments
pp. 549-554(6)
Authors: Stevens, K.K.; Co, C.M.

Insulataing dwellings against road traffic noise
pp. 555-558(4)
Authors: Sargent, J.W.; Utley, W.A.; Keighley, E.C.

A simplified field method of measuring the aggregate adverse deviation of a partition
pp. 559-562(4)
Authors: Lee, L.J.; MacKenzie, R.K.

A subjective study of party wall sound insulation
pp. 563-566(4)
Author: Bradley, J.S.

Acoustic intensity measurements and their application to the sound transmission loss of panels and walls
pp. 567-570(4)
Author: Cops, A.

Comparison of the different methods for outdoor measurement of the airborne sound insulation of windows and facades
pp. 571-574(4)
Authors: Schumacher, R.; Mechel, F.P.

A better sound insulation between houses by using a flexible mounted floor
pp. 575-578(4)
Author: Landheer, W.F.

Sound fields near building facades
pp. 579-582(4)
Author: Quirt, J.D.

Definition of and relationship between breakout and breakin sound transmission loss of pipes and ducts
pp. 583-586(4)
Author: Ver, Istvan L.

The measurement of "breakout" and "breakin" transmission loss of rectangular ducts
pp. 587-590(4)
Authors: Nelson, P.A.; Fry, A.T.; Burnett, R.

Noise control in a very large hall of a shipyard
pp. 591-594(4)
Authors: Schullen, William M.; Straatsma, Hendrik

Empirical prediction of sound propagation and RT in factories
pp. 595-598(4)
Author: Hodgson, Murray

A computer simulation procedure for the optimization of the joint effect of barriers and absorbing material in industrial halls
pp. 599-602(4)
Authors: Benedetto, Giuliana; Spagnolo, Renato

Effects of measures to decrease the reverberation time in shipbuilding halls
pp. 603-606(4)
Author: van den Berg, J.H.

Investigations on impulse measurement methods for impact sound insulation testing
pp. 607-610(4)
Author: Goydke, M.

Non-linearity problems connnected with impact sound insulation measurements
pp. 611-614(4)
Author: Lindblad, S.G.

Low frequency impact sound from timber joist floors
pp. 615-618(4)
Author: Einarsson, Stefan

Measurement of the impact sound insulation improvement
pp. 619-622(4)
Authors: Bodlund, Kaj; Jonasson, Hans G.

Methods used in the Federal Republic of Germany for the measurement and description of community noise
pp. 623-626(4)
Author: Martin, R.

On the problem of quick measurement of the insulation value of building parts
pp. 627-630(4)
Authors: Stoll, H.R.; Leutwiler, M.

The control of lorry noise
pp. 631-634(4)
Author: Vulkan, George

Prediction of sidewalk noise levels caused by traffic in an urban central business district
pp. 635-638(4)
Author: Watson Jr, Hal

Noise abatement at general aviation airframe in the Federal Republic of Germany
pp. 639-642(4)
Author: Gummlich, Heniz J.

A practical method for online identification of noise radiated from starting and landing aircraft in Copenhagen airport
pp. 643-646(4)
Author: Hess, Jorgen

Noise aspects of ultralights and model airplanes
pp. 647-650(4)
Author: van Deventer, F.W.J.

The reduction of aircraft noise zones around airports by increasing the proportion of low noise aircraft
pp. 651-654(4)
Author: Lang, Judith

Development of the airport of Beograd and problem of protection of neighbouring suburb housing form the excessive aircraft noise
pp. 655-658(4)
Authors: Gvozdenovic, Slobodan; Zoric, Dussan

The reduction of annoyance caused by road traffic noise in the next decade - Measures and costs
pp. 659-662(4)
Author: Lang, Judith

A new methodology for the prediction of noise exposure around general aviation airfields based on a Nordic data bank
pp. 663-666(4)
Authors: Svane, C.; Plovsing, B.

Perceived noise reduction and secondary effects for the use of building insulation and barriers
pp. 667-670(4)
Authors: Solberg, S.; Hagen, R.; Omnundsen, R.

Analysis of environmental noise and determination of highest acceptable noise levels with regard to noise control in Istanbul
pp. 671-676(6)
Author: Kurra, S.

A new aircraft noise exposure prediction model
pp. 677-680(4)
Authors: Plovsing, B.; Svane, C.

Noise insulation of residences around Kastrup airport of Copenhagen
pp. 681-684(4)
Author: Andersen, Tage V.

The consultant and conflicting criteria in community noise problems
pp. 685-688(4)
Author: Ward, F.L.

Train noise in a shallow valley: A case history
pp. 689-692(4)
Author: Garbell, Mauride A.

Aircraft noise impact on the enviroment of the general aviation airport of Bovec in Julian Alps
pp. 693-696(4)
Author: Zoric, Dusan

Control of road traffic noise and energy consumption
pp. 697-700(4)
Author: Lamure, C.

Road traffic noise prediction methods - State-of-the-art and outlooks
pp. 701-704(4)
Author: Buna, B.

Motorway noise reduction by covering grooved concrete with open graded rubberised asphalt
pp. 705-708(4)
Author: De Brabander, L.

The change of acoustical properties of traffic noise at different distances from the road
pp. 709-712(4)
Author: Ritterstaedt, U.

Traffic noise as a guide for town planning "an optimization study"
pp. 713-716(4)
Authors: Abou-El-hassan, A.; Abdel, O.; El-Reedy, T.

Experiences with a noise abatement policy based on financial support for investors in low-noise equipment
pp. 717-720(4)
Author: Eggink, E.

Noise control design for a steelworks plant
pp. 721-724(4)
Authors: Elvhammar, Hans; Staleby, Ola

Reduction of noise from induction furnaces
pp. 725-728(4)
Authors: McQueen, D.H.; Lundmark, G.

Elimination of noise from burners by replacement with heaters
pp. 729-732(4)
Author: McQueen, D.H.

Flexible blankets for noise control insulation
pp. 733-736(4)
Authors: Thornton, Charles C.; Wood, Eric W.

Reduction of the noise from circular saw blades
pp. 737-742(6)
Author: Hansen, N.E.

Criteria survey of aircraft noise measurements in the neighborhood of Brussel's national airpor
pp. 743-746(4)
Authors: De Belder, P.; Myncke, H.; Cops, A.; Bruyninckx, W.

A noise appraisal of the Fal Estuary
pp. 747-750(4)
Author: Kirk, A.J.

Industrial noise in Baghdad
pp. 751-754(4)
Author: Rawas, Nazar Y.

Airborne and structure borne sound on offshore production platforms
pp. 755-758(4)
Authors: Straatsma, Hendrik; Schuller, Willem M.

Designing to meet the United Kingdom Department of Energy's noise and vibration limits on offshore installations
pp. 759-762(4)
Author: Manning, C.J.

Noise and vibration planning for mobile offshore platforms
pp. 763-766(4)
Authors: Abrahamsen, Kai A.; Gravastrand, Per T.

Noise assessment on hydroacoustic position reference systems
pp. 767-770(4)
Authors: Levik, A.; Holden, K.

Offshore support vessels noise situation and proposals for noise reducing measures
pp. 771-774(4)
Author: Brubakk, Elnar

The dynamic absorber as a guide moment compensator
pp. 775-778(4)
Author: Thrane, Henrik W.

Noise reduction by airinlet in the propeller duct
pp. 779-782(4)
Authors: Lovik, A.; Holden, K.

Propeller induced hull vibration - The determination of exciting forces
pp. 783-788(6)
Author: Sunnersjo, C.S.

Noise exposure of engine room personnel
pp. 789-792(4)
Author: Buiten, J.

Vibration damping for shipboard vibration and noise control
pp. 793-796(4)
Authors: Kirschner, Francis; Koch, John E.

Noise control in the engineer's cab of an electronic locomotive engine of the Dutch railways, series number 1305
pp. 797-798(2)
Author: van Rangelrooij, P.

Noise reduction by airinlet in the propeller duct
pp. 799-802(4)
Authors: Lovik, A.; Holden, K.

The selection and specification of audible alarm signals
pp. 803-806(4)
Author: Harris, R.

Industrial plants can be good neighbors
pp. 807-810(4)
Author: Jensen, P.

Loudness and annoyance of low frequency sound
pp. 811-814(4)
Authors: Nakamura, Shun'ichi; Tokita, Yasuo

Loudness of infrasound
pp. 815-818(4)
Authors: Moller, Henrik; Andresen, Jente

Annoyance of infrasound
pp. 819-822(4)
Authors: Andresen, Jente; Moller, Henrik

Sensation of low frequency noise of deaf persons
pp. 823-826(4)
Authors: Yamada, Shinji; Ikuji, Michinori; Fujikata, Shingo

Acoustic recognition of aircraft types in flight
pp. 827-830(4)
Authors: Yamada, I.; Yokota, A.; Shimizu, S.; Yamashita, M.; Okamoto, T.

The effect of variations in the microstructure of individual low frequency thresholds and loudness functions on noise control criteria
pp. 831-834(4)
Author: Frost, G.P.

Assessment of general alarm and public address systems on offshore installations
pp. 835-838(4)
Authors: Evans, David B.; Athey, John D.

On the loudness of train noise from ordinary railway
pp. 839-842(4)
Authors: Kumagai, Masazumi; Suzuki, Yoiti; Sone, Toshio