INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Facade sound insulation - A review of methods
pp. 471-474(4)
Author: Nash, Anthony P.

Performance of sound transmission loss of metal-stud lighweight panel partitions
pp. 475-478(4)
Authors: Wang, Ji-qing; Gu, Qiang-quo

Noise from building air distribution systems - The impact of variable air-volume system designs
pp. 479-482(4)
Author: Blazier Jr., Warren E.

Noise from building air distribution systems
pp. 483-486(4)
Author: Graham, J. Barrie

New development in building noise control
pp. 487-490(4)
Author: Hirschorn, Martin

Noise reduction in the control room of a lock
pp. 491-494(4)
Authors: Schuller, Willem M.; Brink, Roel

New developments in the acquisition and analysis of short-term Leq series: The use of simultaneous measurements
pp. 495-498(4)
Authors: Sivieys, J-P.; Germon, A.

A means to classify aircraft tpes automatically for noise monitoring systems
pp. 499-502(4)
Authors: Darby, Ronald A.; Ebisu, Yoichi

Measuring air traffic noise in the vicinity of an international airport
pp. 503-506(4)
Authors: De Belder, P.; Myncke, H.; Cops, A.

Possible role of flight procedures in the control of airport noise
pp. 507-510(4)
Author: Eldred, Kenneth McK.

Land-use planning in the environs fo airports. Future needs and constraints
pp. 511-514(4)
Author: Garbell, Maurice A.

Airport noise: Have we learned form the past?
pp. 515-518(4)
Author: Harris, Andrew S.

Evolution of airport design and the problems of noise control
pp. 519-522(4)
Author: Large, John B.

Noise control for Singapore Changi Airport
pp. 523-526(4)
Author: Lim, M.K.

Technical foundation and operational effectiveness of noise-related landing fees at the Zurich and Geneva airports
pp. 527-530(4)
Author: Schurter, Ernst

Canada's first fixed-site aircraft noise monitoring system
pp. 531-534(4)
Author: Standen, Neil M.

Methodology of adaptation and practical verification of the noise exposure contours calculation model for actual cases of applications
pp. 535-538(4)
Authors: Vuckovic, M.; Zoric, Dusan

Noise control programme for the airport "split" based on the interviewing of the residents in the surrounding settlements, analysis of the existing take off and landing procedures and direct aircraft noise measurements
pp. 539-542(4)
Authors: Zoric, Dusan; Lukic, Dragan; Gvozdenovic, Slobodan

Comparison of highway noise control programs in Japan and the United States
pp. 543-546(4)
Author: Cohn, Louis F.

Noise control for diesel electric generating plant
pp. 547-550(4)
Authors: Kessler, Frederick M.; Archambault, Claude

Joint Nordic research project on environmental noise from industry
pp. 551-554(4)
Author: Kragh, Jorgen

Experiences of noise control in the Swedish concrete prefab industry
pp. 555-558(4)
Author: Holmberg, Lars

Industrial noise exposure monitoring, Dosimetry vs area measurements
pp. 559-562(4)
Author: Earshen, John J.

A practical safety limit for exposure to impulsive noise
pp. 563-566(4)
Author: Flottorp, Gordon

Is it possible to predict noise exposure from single-point sound level measurements?
pp. 567-570(4)
Authors: Ohlen, Matz; Bennerhult, Ove; Lundin, Kjell

The complex effest of stable noise, sinusoidal vs stochastic low frequency whole-body vibration and dynamic muscular work in temporary hearing threshold shifts (TTS) at a dry-bulb temperature of 30-degrees Celcius
pp. 573-576(4)
Author: Manninen, Olavi

Occupational noise exposure - How should we measure it?
pp. 577-580(4)
Author: Barry, John P.

An audiometric data base system
pp. 581-584(4)
Authors: Lee, Van M.; Knoll, Wendel L.

Dosage-response relationships for community annoyance with blasting
pp. 585-588(4)
Authors: Fidell, S.; Horonjeff, R.

Effects of urban noise
pp. 589-592(4)
Author: Groenewold, Federico

Assessment of the human attitude as means of urban noise control
pp. 593-596(4)
Authors: Lopez, Luis; Groenewold, Federico

Annoyance and loudness of repetitive type noise sources - A review
pp. 597-600(4)
Author: Sutherland, Louis C.

Research on concrete examples of low frequency noise problems
pp. 601-604(4)
Author: Yamada, Shinji

Community response to blast noise and buiding vibration
pp. 605-608(4)
Author: Schomer, Paul

Effects of errors in specifying noise environments on results from community response surveys
pp. 609-612(4)
Author: Fields, James M.

Clean dwelling quarter
pp. 613-616(4)
Authors: Beuran, Nicolae; Halpert, Erich

Policy implementation lines: An effective translation
pp. 617-620(4)
Author: Greene, Rob

Predicting the effect of environmental emissions containing high levels of low frequency noise
pp. 621-624(4)
Author: Broner, Norman

Provisional night time criteria for rating the acceptability of community noise
pp. 625-628(4)
Author: Challis, Louis A.

Preview and critique of auditory-risk criteria as applied to noise within cockpits of aircraft
pp. 629-632(4)
Author: Gasaway, Donald C.

Is noise classable?
pp. 633-636(4)
Author: Kalic, Duban D.

How can the accuracy of noise contours be improved?
pp. 637-640(4)
Author: Lewis, Nelson D.

The accuracy of aircraft noise exposure calculations and predictions
pp. 641-644(4)
Author: Peutz, Victor M.A.

Recent progress in impact noise testing and rating
pp. 645-648(4)
Author: Schultz, Theodore J.

Acoustical criteria applicable to large wind turbine generators
pp. 649-652(4)
Authors: Shepherd, Kevin P.; Stephens, David G.

Using noise dosimetry in noise control. Case studies
pp. 655-658(4)
Authors: Bengtson, Peter; Ekstrom, Roger

Instruments and sampling
pp. 659-662(4)
Authors: Hess, Paul W.; Reed, C. Richard

Personal noise exposure meter by use of coulomb meter - Noise badge
pp. 663-666(4)
Authors: Ono, H.; Mizoi, K.; Ino, T.; Okamoto, K.

Using portable instrumentation to monitor noise
pp. 667-670(4)
Author: Schomer, Paul

Community noise monitoring at general aviation airports
pp. 671-674(4)
Author: Van Houten, John J.

Dual channel acoustical signal processing via two single channel real time analyzer
pp. 675-678(4)
Authors: Nicolas, Jean; Gosselin, Blaise; Lemire, Gilles

An improved M-sequence correlation method for measuring under low signal-to-noise conditions
pp. 679-682(4)
Authors: Eriksson, Per; Lindblad, Sven

A selective two-microphone intensity method for evaluating wound radiation from individula elements of a coherent source array
pp. 683-686(4)
Authors: Bucheger, D.J.; Trethewey, Martin W.; Evensen, Harold A.

Estimation of surface velocity by use of the two microphone technique
pp. 687-690(4)
Authors: Forssen, Bjorn; Crocker, Malcolm J.

Analysis of errors and field of application for sound intensity measurements for the determination of sound power of sound sources using 'in situ' measurements conditions
pp. 691-694(4)
Author: Hubner, Gerhard

Intensity probe obstacle effects and errors on the transfer function technique to calibrate acoustic intensity measurements
pp. 695-698(4)
Authors: Kiteck, Paul; Tichy, Jiri

Some investigation on the limitations of acoustic intensity measurements by two microphone technique in noise source indentification
pp. 699-702(4)
Author: Krishnappa, G.

Evaluation of sound sources on a boiler feed pump by intensity measurements
pp. 703-706(4)
Author: Laville, F.

Calibration and application of nearfield holography for intensity measurement
pp. 707-710(4)
Authors: Maynard, J.D.; Williams, E.G.

Development in sound intensity measurement instrumentation
pp. 711-714(4)
Author: Rasmussen, Gunnar

What are the limitations of intensity technique in a hemi-diffuse field
pp. 715-718(4)
Author: Roland, Jacques

Some observations on the application of the acoustic intensity method
pp. 719-722(4)
Author: Seybert, A.F.

Acoustic intensity measurement error
pp. 723-726(4)
Author: Thompson, James K.

Direct measurement of transmission loss of aircraft structures using acoustic intensity approach
pp. 727-730(4)
Authors: Wang, Yiren S.; Crocker, Malcolm J.

In situ sound power measurements in industrial environments
pp. 731-734(4)
Author: Baki, K.R.

The comparison of two formulas concerning sound power measurements in a reverberation chamber at low frequencies
pp. 735-738(4)
Author: Kurtovic, Husnija

Application of the two-surface method for determining the sound power level of equipment in a power plant environment
pp. 739-742(4)
Author: Nuspl, Steve P.

Verification surveys for ASTM proposed two surface method for field sound power determination
pp. 743-746(4)
Author: Putnam, Robert A.

Development of the two-microphone cross-spectral method for in-situ sound power measurement
pp. 747-750(4)
Author: Wolf, H. Alan

Simplification of sound isolation measurement techniques
pp. 751-754(4)
Author: Leventhall, H.G.

An experimental technique of determining acoustic mode shapes
pp. 755-758(4)
Authors: Nieter, Jeffrey J.; Singh, Rajendra

Noise control of a model scale jet engine component test facility
pp. 759-762(4)
Author: Simcox, Craig D.

Computer aided design of jet engine test cell exhaust systems
pp. 763-766(4)
Author: Collings, David

Noise control in jet engine test facilities
pp. 767-770(4)
Author: Dawson, George F.

Acoustic measurements in a jet engine test facility
pp. 771-774(4)
Author: Miller, Vincent R.

Acoustic specifications for the design of jet engine test facilities on an airbase
pp. 775-778(4)
Author: Strumpf, F. Michael

Window and door test facility
pp. 779-782(4)
Authors: Cable, Cecil; Hilliard, John

Source location with the acoustic telescope
pp. 783-786(4)
Author: Billingsley, John

Design and performance analysis for a large ellitpical acoustic mirror
pp. 787-790(4)
Author: Yesil, Oktay

Statistical analysis of modal damping estimates
pp. 791-794(4)
Author: Seybert, A.F.

Nonstationarity tests for aircraft noise
pp. 795-798(4)
Authors: Tsao, Y.H.; Hammond, J.K.

Three-dimensional, finite element, acoustic modal analysis
pp. 799-802(4)
Authors: Doyle Jr., George R.; Faulkner, Lynn L.

Mathematical modeling of complex noise barriers
pp. 803-806(4)
Author: Hayek, Sabih I.

Scale model studies of noise propagation over finite impedance ground
pp. 807-810(4)
Authors: Hutchins, D.A.; Jones, H.W.; Russell, L.T.

The dynamics of impacting distributed systems using bond graphs
pp. 811-814(4)
Author: Margolis, Donald L.

Application of the computer program "Schall" for estimating outdoor sound propagation and for optimization of noise-abatement measures in industry
pp. 815-818(4)
Author: Teodorescu, Paul

Structural sources of forge hammer noise in production operations: A summary of an identification study using multiple-input models
pp. 819-822(4)
Authors: Trethewey, Martin W.; Evensen, Harold A.; Hendrickson, Alfred A.

Large computer modeling in a semi-anechoic environment
pp. 823-826(4)
Author: Wise, Russell E.

International standards for sound power level determinations in situ
pp. 829-832(4)
Author: Lang, William W.

Some effects of multiple sources in reverberation room tests
pp. 833-836(4)
Author: Warnock, A.C.C.

The correlation of noise measurements with hearing damage
pp. 837-840(4)
Author: Dear, Terrence A.

Institute of National Resources: Noise Management Research Program
pp. 841-844(4)
Author: Herlevsen, Neils B.

Routine noise measurements in Austrian industry performed by the Austian Workers Compensation Board during 1978 to 1980
pp. 845-848(4)
Author: Korpert, Karl

Noise standards and enforcement
pp. 849-852(4)
Author: Lyzun, Danile

Noise control regulations in Yugoslavia
pp. 853-856(4)
Authors: Pravica, Petar; Nikolic, Mihailo

Implementation of "noise budgets" for civil airports
pp. 857-860(4)
Author: Bishop, Dwight E.

Rubber yardsticks
pp. 861-864(4)
Author: Rockwell, Thomas H.