INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Towards a quieter society
pp. 3-6(4)
Author: Ginjaar, L.

The all-important practice of noise control engineering
pp. 7-14(8)
Author: Pentz, V.M.A.

The international institute of noise control engineering state of the institute
pp. 15-20(6)
Author: Ingerslev, Fritz

The practice of noise control engineering in the U.S.A.
pp. 21-36(16)
Author: Lang, William W.

A review of EPA's implementation of the quiet communities act of 1978
pp. 39-42(4)
Authors: Caccavari, C.; Shura, C.J.; Dunn, S.E.

The noise abatement program of the German Federal Ministry of the Interior, and its implementation
pp. 43-46(4)
Author: Scholz, T.G.

The "low-noise vehicle program" of the Umweltbundesamt (Federal Environmental Agency)
pp. 47-50(4)
Author: Kemper, Gert

Participation of public and private organizations in development of noise-abatement action program of the German Federal government
pp. 51-53(3)
Author: Vogel, Ansgar O.

Noise databases - A Scandinavian approach
pp. 55-58(4)
Authors: Storeheier, Svein A.; Liasjo, Kare H.

Acoustical engineering
pp. 59-62(4)
Author: Mattel, Jean P.

Noise problems with respect to underwater cooling pumps: A case history
pp. 65-68(4)
Authors: Straatsma, H.; Spaninks, J.A.

Sound emission of shredder-plants
pp. 69-72(4)
Authors: Straatsma, H.; Jansen, R.P.M

Drive line vibration as a cause of noise inside a car
pp. 73-76(4)
Author: Renski, Andrzej

Acoustical investigations of the noise effect of some construction data of the profiled port during air flow onto a limited area with reduced pressure
pp. 77-80(4)
Author: Zielinski, Tadeusz

The A-weighted sound power level of fans
pp. 81-84(4)
Author: van Meier, A.

Noise reduction of air ventilators at middle pressure boilerroom 6, 4 MPa in heat station BRNO-Spitalka
pp. 85-88(4)
Author: Kambersky, Vladimir

Noise generated by centifugal fans
pp. 89-92(4)
Author: Sentek, Jan

Differences between diesel engine noise source strengths measured in the ship and on the test bed
pp. 93-96(4)
Author: Conn, R.B.

Analysis of cavity resonance in a 5 hp hermetic reciprocating compressor with elliptical shell
pp. 97-100(4)
Authors: Hayashi, T.; Matsuzaka, T.; Shinto, H.

Drop hammer noise: The effects of stress concentrations in the impact area
pp. 101-104(4)
Author: Westcott, M.E.

Transformer noise
pp. 105-108(4)
Author: Schuller, Willem M.

Noise from distribution transformers
pp. 109-114(6)
Authors: Belisario, G.; Franco, S.

How to work for silent household appliances
pp. 115-118(4)
Authors: Betzhhold, Ch.; Gahlau, H.; Stankiewicz, A.

Noise control in household appliances
pp. 119-122(4)
Author: Crucq, J.

Noise measurement of small central heating - Circulating water pumps with water-borne sound transducers
pp. 123-126(4)
Author: Bernard, G.

Noise from new types of energy conservation equipment in detached houses
pp. 127-130(4)
Authors: Jagenas, Arne; Kleimer, Mendel

Noise mechanisms in water taps
pp. 131-134(4)
Authors: Fuchs, Helmut V.; Kloppner, Ulrike

Noise reduction in cutting and welding
pp. 135-138(4)
Authors: Ackermann, U.; Ratsch, E.

Problem of vibration modal density in noise reduction of a metal cutting circular saws
pp. 139-142(4)
Author: Kulczycki, Szymon

Jet engine noise and alleviation
pp. 143-146(4)
Author: Jacques, Rene

Noise reduction concept for uni-car research passenger car
pp. 147-150(4)
Authors: Liedl, Werner; Schwarz, Rolf

Noise directivity of a light running vehicle
pp. 151-154(4)
Author: Pachiaudi, Georges

Noise reduction by a new power-train concept of a motorcycle
pp. 155-158(4)
Author: Menzl, Karl Heniz

Controlling the noise of a conventional heavy-duty diesel truck
pp. 159-164(6)
Authors: Bender, Erich K.; Bronsdon, Robert L.; Remington, Paul J.

On locating sources of radiated noise generated by high-speed electric trains
pp. 165-168(4)
Authors: King III, W.F.; Barsilow, B.; Pfizenmaier, E.

Hydroacoustic noise from seismic vessels
pp. 169-172(4)
Author: Tyvand, N.P.

Lawn mover noise testing on natural and artificial surfaces
pp. 173-176(4)
Author: Goydke, Hans

Noise analysis and reduction of twisting textile machine
pp. 177-182(6)
Authors: Bartolozzi, Georgio; Bartolozzi, Michelangiolo

Noise reduction by enclosure of wood working machines in sawmills and joinery mills
pp. 183-188(6)
Author: Emborg, Urban

The ways of noise reduction at the source in the case of an electric arc furnace
pp. 189-192(4)
Authors: Makomaski, M.; Zmyslowski, A.

Ball mill noise
pp. 193-196(4)
Authors: Schuller, Willem M.; van der Ploeg, Fokke D.

Influence of a ship propeller loading on the shape of the underwater sound's power spectrum
pp. 199-202(4)
Author: Kozaczka, Eugeniusz

Scaling of noise from small conventional, annular and coaxial jets
pp. 203-208(6)
Author: Audi, Mahmoun S.

Approximate effective point mobilities for foundation and machinery footings
pp. 209-212(4)
Authors: Petersson, Bjorn; Plunt, Juha

Generation and reduction of radiated structure borne noise caused by machinery elements different in shape
pp. 213-216(4)
Author: Hubner, Gerhard

Evaluation of machinery noise by intensity measurements
pp. 217-220(4)
Authors: Janssen, L.; Van den Noortgate, L.; Sas, P.

Sound decays in rectangular rooms
pp. 221-224(4)
Author: Bradley, J.S.

Sound propagation in free field and in the presence of ground
pp. 225-228(4)
Authors: Jones, H.W.; Hutchins, D.A.

Sound propagation over an impedance discontinuity
pp. 229-232(4)
Author: Rasmussen, Karsten Bo

A close look at the transfer function in outdoor noise problems
pp. 233-238(6)
Authors: Berkhout, A.J.; van Wulffen Palthe, D.W.

The prediction of sound levels from exposive sources
pp. 239-242(4)
Authors: Lord, P.; Saunders, D.J.; Silis, A.G.

Diffraction by barriers over absorbent ground
pp. 243-248(6)
Authors: Hayek, Sahih I.; Nobile, Matthew A.

Comparison of noise attenuation in vegetations with stationary and moving sound sources
pp. 249-252(4)
Authors: Martens, M.J.M.; Hulshof, P.; Huys, L.; Konings, J.G.B.; Olders, J.; Walraven, M.

Acoustic effect of trees on barriers
pp. 253-256(4)
Authors: Schuller, Willem M.; de Zeeuw, Jakob H.

Noise propagation and atmospheric conditions
pp. 257-259(3)
Author: Hache, Jean

A new method for calculation of the influence of wind and temperature II
pp. 261-264(4)
Authors: de Jong, B.A.; van Wulfften Palthe, D.W.; Berkhout, A.J.

Impedance measurements of natural soils with an inclined track method
pp. 265-270(6)
Author: van der Heijden, L.A.M.

Calculation of noise propagation with multiple ground reflections in an inhomogeneous atmosphere
pp. 271-274(4)
Authors: Lahti, Tapio; Tuominen, Heikki T.

Problems in determining the outdoor ground impedance by measurements of sound propagation
pp. 275-278(4)
Authors: Mellert, V.; Wempen, J.; Wilken, W.

Highway noise control by barriers: A state-of-the-art summary in the United States
pp. 281-284(4)
Author: Cohn, Louis F.

Shielding of noise by earth berms
pp. 285-288(4)
Author: Kurze, U.J.

Barrier insertion loss for large noise sources, with special emphasis on power transformer noise control
pp. 289-292(4)
Authors: Ver, Istan L.; Anderson, Grant S.; Gordon, Colin G.

A practical prediction model for shielding of traffic noise by roadside buildings
pp. 293-296(4)
Author: Wittner, Kalman

Disspative silencers with minimized back pressure
pp. 297-302(6)
Authors: Shenoda, F.B.; van der Wal, H.M.M.; von Maier, A.

Active acoustic attenuation of electric transformer noise
pp. 303-306(4)
Author: Angevine, O.L.

Improvements in adaptive active attenuators
pp. 307-310(4)
Authors: Warnaka, Glenn E.; Tichy, Jiri; Poole, Lynn A.

Drive-rod for velocity error correction
pp. 313-316(4)
Author: Endroczi, G.T.

Impulsive noise source on the structure by mechanical inertance
pp. 317-320(4)
Authors: Oh, Jae-eung; Mori, S.; Mastui, M.

Investigations on the radiation of low frequency sound from highway bridge
pp. 321-324(4)
Authors: Kaneyasu, K.; Adachi, Y.; Koyasu, M.; Shimizu, S.

Low frequency noise from a big building due to oscillatory forces of a machine
pp. 325-330(6)
Authors: Nishiwaki, Niichi; Fujio, Noboru; Mori, Takuji

Vibration inside tall buildings
pp. 331-334(4)
Author: Ko, N.W.M.

Vibration characteristics of pipe clamps
pp. 335-340(6)
Author: White, Maurice F.

On the assessment of vibrational damping applied in the vicinity of marine-engine foundations
pp. 341-344(4)
Author: Ohlrich, M.

A lightweight mount for effective isolation of petrol engine vibrations at acoustic frequencies in small motorboats
pp. 345-348(4)
Author: Albrecht, Klaus

A damped grillage frame as a light machine foundation
pp. 349-352(4)
Authors: Kamph, Esse; Lunden, Roger

An engineering method for estimating vibration isolation properties also at higher frequencies
pp. 353-356(4)
Author: Plunt, Juha

Simple experimental method for estimating frequency bandwidth averages of real parts of point admittances for six degrees of freedom
pp. 357-362(6)
Author: Verheij, J.W.

Patial damping layer treatments for plates
pp. 363-366(4)
Authors: Stevens, K.K.; Kung, C.H.; Dunn, S.E.

Noise control engineering in building in general
pp. 369-372(4)
Author: de Lange, P.A.

Sound propagation in industrial halls - Application of FFT-analysis in measurements
pp. 373-376(4)
Author: Aagren, Anders

Public telephone cabinets: Acoustic properties
pp. 377-382(6)
Author: Cook, K.R.

Impulsive noise in enclosures
pp. 383-386(4)
Author: Kynel, Zdenek

Sound attenuation in large factories
pp. 387-390(4)
Author: Lindqvist, Elizabeth

The influence of V-form ceiling on the sound pressure level in industrial halls - An extension of the image theory
pp. 391-396(6)
Authors: Pompoli, Roberto; Simoni, Franco; Tarabusi, Valerio

Simple image method for calculating of noise distribution within industrial hall
pp. 397-400(4)
Authors: Takagi, N.; Aikawa, Y.; Matsui, M.

Insulating an existing college building against traffic noise
pp. 401-404(4)
Author: Bansal, A.S.

Calculation of the sound reduction by facades
pp. 405-408(4)
Author: Gerretsen, E.

Experiences from the 2 first years of a program on facade insulation
pp. 409-414(6)
Author: Solberg, Sigurd

An example of measures for preventing structure-borne sound in a building adjacent to a subway station
pp. 415-418(4)
Authors: Kouda, K.; Mugikura, K.; Hosono, T.; Tano, M.

Measurement of the sound transmission losses of components accessible from one side only
pp. 419-422(4)
Author: Mantel, Juval

Noise and heatloss protecting fresh air providing elements
pp. 423-426(4)
Author: Meyer, Thomas J.

Sound-insulation of gates and large apertures
pp. 427-430(4)
Author: Porada, W.

Indirect sound transmisson via doors
pp. 431-434(4)
Authors: de Roo, F.; Beentjes, W.G.M.; Jansen, B.

Sound insulation of laminated insulating glazings
pp. 435-438(4)
Author: Ruckward, Werner

The state of the art in the air-borne insulation between dwellings
pp. 439-442(4)
Author: Vermeir, Gerrit

Rating of sound insulation by means of A-level reductions
pp. 443-448(6)
Authors: van Willigenburg, J.J.; Nierop, C.A.

Noise reduction and sound radiation efficiency of the rectangular enclosure: Structure-borne sound
pp. 449-452(4)
Authors: Yasuda, Hiroyuki; Matsui, Masayuki

The prediction of sound transmission through buildings
pp. 453-456(4)
Authors: Craik, Robert J.M.; Mackenzie, Robin K.

Elastic mounting as a means of controlling impact noise in stairways
pp. 457-460(4)
Authors: Ertel, Hanno; Mechel, Fridolin P.

Improvement of impact sound isolation with "floating" tiles
pp. 461-464(4)
Authors: Louwers, M.; Heringa, P.