INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Wind-induced sound pressures at the human ear
pp. 959-962(4)
Author: Hillquist, Ralph K.

Amplitude distributions of industrial noises and their possible effects on hearing damage
pp. 963-966(4)
Author: Broch, Jens Trampe

The influence of impulse sound on noise measurements and assessment of the risk for noise induced hearing loss
pp. 967-970(4)
Authors: Voigt, P.; Godenhielm, B.; Ostlund, E.

Annoyance caused by traffic noise in persons with normal and impaired hearing
pp. 971-974(4)
Authors: Aniansson, Gunnar; Pettersson, Karin; Peterson, Yvonne

The contribution of indoor and outdoor effects to annoyance at noise in residential areas
pp. 975-978(4)
Authors: Birnie, Susan E.; Hall, Fred L.; Taylor, S. Martin

Human response to blasting noise and vibration
pp. 979-984(6)
Author: Kamperman, George W.

Short-term equivalent level series: An efficient tool for environmental assessment
pp. 985-990(6)
Authors: Sirieys, J.P.; Commins, D.E.

Predicting public reaction to noise from mixed highway, light-rail-transit and park-and-ride facility noise sources for the proposed Banfield transitway, Portland Oregon
pp. 991-996(6)
Author: Cass, Glenn R.

An engineering index of diesel engine idling noise
pp. 997-1000(4)
Authors: Challen, B.J.; Kuczora, A.

New type condenser microphone for measurements
pp. 1003-1006(4)
Authors: Okuda, M.; Yoshikawa, K.; Hayashi, Y.

On overestimation of noise dose in the presence of impulsive noise
pp. 1007-1010(4)
Author: Earshen, John J.

Dosimeter response to impulsive noise
pp. 1011-1014(4)
Author: Kamperman, George W.

Usefulness of noise dosimeters in measuring long-term noise exposure
pp. 1015-1018(4)
Authors: Buchholtz, Walter F.; Yonovitz, A.

Binaural noise dosimetry
pp. 1019-1022(4)
Authors: Yonovitz, A.; Buchholtz, Walter F.

Full-spec portable type real time frequency analyzer for on site measurement
pp. 1023-1026(4)
Authors: Koshiroi, T.; Koyama, K.; Kawasaki, S.

Issues in specification calibration and certification of acoustical instruments for enforcement
pp. 1027-1030(4)
Author: Earshen, John J.

Calibration of instrumentation for measurement of sound and vibration
pp. 1031-1034(4)
Author: Rodman, Charles W.

MSHA program for type testing and calibration of personal noise dosimeters
pp. 1035-1038(4)
Author: Seiler, John P.

Calibration of OSHA's noise measuring equipment
pp. 1039-1042(4)
Author: Feldman, Raymond F.

Traceability of acoustical instrument calibration to the National Bureau of Standards
pp. 1043-1046(4)
Author: Nedzelnitsky, Victor

Calibration and certification - What an acoustical testing laboratory can do
pp. 1047-1050(4)
Author: Guernsey, Richard M.

Acoustical laboratory accreditation - Problems and solutions
pp. 1051-1054(4)
Author: Challis, Louis A.

Calibration of instrumentation for noise and vibration measurements
pp. 1055-1058(4)
Author: Rasmussen, Gunnar

The direct measurement of acoustic energy by a punch press
pp. 1059-1062(4)
Author: Alfredson, Robin J.

Application of two-microphone acoustic intensity methods to production forge hammer impact noise
pp. 1063-1066(4)
Authors: Okubo, Koichi; Lord, Harold W.

Sound characterization using acoustic intensity measurements
pp. 1067-1070(4)
Author: Seybert, A.F.

Improvement of sound power level nearfield measurement on electrical machine in situ
pp. 1071-1078(8)
Author: An-tze, Shew

Acoustic power construction due to source near the reverberation chamber boundaries
pp. 1079-1082(4)
Authors: Gerges, S.N. Yousri; de Araujo, M.A.N.

Sound power determination using intensity measurements under field conditions
pp. 1083-1086(4)
Authors: Laville, F.; Salvan, G.; Pascal, J.C.

Inpulsive noise: Determination of sound power using reverberation room methods
pp. 1087-1092(6)
Author: Woehrle, Kurt K.

Noise reduction test facilities at Douglas Aircraft
pp. 1093-1096(4)
Author: Zwieback, E.L.

Features of a semi-anechoic chamber for vehicles
pp. 1097-1102(6)
Author: Cohen, Raymond

Peak level detection for fluctuatiing impulse noise
pp. 1103-1106(4)
Author: Svensson, Jorgen

Errors in measuring noise with impulse type components when using automated monitoring instrumentation
pp. 1107-1110(4)
Authors: Lewis, Nelson D.; Luz, George A.; Gustin, Ellen V.

Noise and vibration applied to engine diagnostics
pp. 1111-1116(6)
Author: Haddad, Sam D.

An indentification of noise sources associated with the operation of a pneumatic peening hammer
pp. 1117-1120(4)
Authors: Lacey, J.A.; Scarton, H.A.; Kennedy, W.C.

Aircraft noise identification system (application for inflight position detector)
pp. 1121-1124(4)
Authors: Nishinomiya, G.; Sasaki, F.; Furukawa, S.; Okuda, M.; Ono, I.; Hayashi, N.

Model investigations on the identification of air-borne and structure-borne sounds
pp. 1125-1128(4)
Authors: Czarnecki, Stefan; Engel, Zbigniew; Golas, Andrzej; Lopacz, Henryk

A comparision of noise source identification techniques on a diesel engine
pp. 1129-1132(4)
Authors: Reinhart, Thomas; Crocker, Malcolm J.

A noise predictive and assessment methodology for evaluating the combined impact of various surface transportation modes
pp. 1133-1136(4)
Author: Eichelberger Jr, E. Curtis

Field evaluation on the FHWA highway traffic noise prediction model
pp. 1137-1140(4)
Authors: Angiola, Alfred J.; Lee, Van M.; Michalove, Robert A.

Use of noise prediction models to develop design specifications for computer equipment noise emissions
pp. 1141-1144(4)
Author: Luttrell, L.F.

Acoustical modeling of a DP installation
pp. 1145-1148(4)
Authors: Wise, Russell E.; Essert Jr, Robert D.

Computer noise modeling in General Motors Corporation
pp. 1149-1152(4)
Author: Hofmeister, J.R.

A computer simulation for determining far-field noise levels radiated from a noise source within a rectangular enclosure
pp. 1153-1156(4)
Author: O'Keefe, Ed

A simulating system for noise sources in close-fitting enclosure
pp. 1157-1160(4)
Authors: Ohlen, Matz; Bennerhult, Ove

Proposed standard methods for measuring and rating steady-state room noise
pp. 1163-1168(6)
Authors: Yaniv, Simone L.; Flynn, Daniel R.

The test of draft standards for measuring and computing outdoor industrial noise in the Netherlands
pp. 1169-1174(6)
Author: Brackenhoff, Hans

Control and abatement of environmental noise in New Jersey
pp. 1175-1178(4)
Author: DiPolvers, Edward J.

Community noise regulation, quantitative techniques
pp. 1179-1182(4)
Author: Manuel, John

Occupational noise legislation in the Netherlands
pp. 1183-1186(4)
Author: Versijmeren, M.A.P.

The impact and future direction of aircraft noise certification
pp. 1187-1190(4)
Author: Smith, M.J.T.

Nanco light vehicle noise enforcement
pp. 1191-1194(4)
Authors: Swing, John W.; Roberts, Jerry E.